Abstract: The study was carried out to evaluated effect of S-gridling on fruit growth and quality of wax apple. The study was laid in Random completed block design with four replicated. Four treatment were applied as follows: S-girdling, fruit thinning plus bagging with 2,4-D sprayed, fruit thinning plus bagging and the control treatment. 2,4D was sprayed at the small bud and petal fall stage. Girdling was applied three week before flowering. The effect of all treatments on fruit growth was measured weekly. Number of flower, fruit set, fruit drop, fruit crack, and fruit quality were recorded. The result indicated that S-girdling, 2,4D application produced the lowest bud drop, fruit drop compared to untreated control. S-girdling improved faster fruit growth producing the best final fruit length and diameter compared to untreated control. S-girdling also markedly enhanced fruit set, fruit weight, and total soluble solid, reduced fruit crack, titratable acidity. On the other hand, it was noticed that with 2,4-D application also increased the fruit growth rate, improved physiological and biochemical characters of fruit than control treatment. It was concluded that S-girdling was recommended as the industry norm to increase fruit set, fruit quality in wax apple. 2,4D application had a distinctive and significant effect on most of the fruit quality characteristics assessed.
Abstract: This paper addresses one important aspect of
combustion system analysis, the spray evaporation and
dispersion modeling. In this study we assume an empty
cylinder which is as a simulator for a ramjet engine and the
cylinder has been studied by cold flow. Four nozzles have the
duties of injection which are located in the entrance of
cylinder. The air flow comes into the cylinder from one side
and injection operation will be done. By changing injection
velocity and entrance air flow velocity, we have studied
droplet sizing and efficient mass fraction of fuel vapor near
and at the exit area. We named the mass of fuel vapor inside
the flammability limit as the efficient mass fraction. Further,
we decreased the initial temperature of fuel droplets and we
have repeated the investigating again. To fulfill the calculation
we used a modified version of KIVA-3V.
Abstract: There are many situations where input feature vectors are incomplete and methods to tackle the problem have been studied for a long time. A commonly used procedure is to replace each missing value with an imputation. This paper presents a method to perform categorical missing data imputation from numerical and categorical variables. The imputations are based on Simpson-s fuzzy min-max neural networks where the input variables for learning and classification are just numerical. The proposed method extends the input to categorical variables by introducing new fuzzy sets, a new operation and a new architecture. The procedure is tested and compared with others using opinion poll data.
Abstract: The healthcare environment is generally perceived as
being information rich yet knowledge poor. However, there is a lack
of effective analysis tools to discover hidden relationships and trends
in data. In fact, valuable knowledge can be discovered from
application of data mining techniques in healthcare system. In this
study, a proficient methodology for the extraction of significant
patterns from the Coronary Heart Disease warehouses for heart
attack prediction, which unfortunately continues to be a leading cause
of mortality in the whole world, has been presented. For this purpose,
we propose to enumerate dynamically the optimal subsets of the
reduced features of high interest by using rough sets technique
associated to dynamic programming. Therefore, we propose to
validate the classification using Random Forest (RF) decision tree to
identify the risky heart disease cases. This work is based on a large
amount of data collected from several clinical institutions based on
the medical profile of patient. Moreover, the experts- knowledge in
this field has been taken into consideration in order to define the
disease, its risk factors, and to establish significant knowledge
relationships among the medical factors. A computer-aided system is
developed for this purpose based on a population of 525 adults. The
performance of the proposed model is analyzed and evaluated based
on set of benchmark techniques applied in this classification problem.
Abstract: Stable nonzero populations without random deaths
caused by the Verhulst factor (Verhulst-free) are a rarity. Majority
either grow without bounds or die of excessive harmful mutations.
To delay the accumulation of bad genes or diseases, a new
environmental parameter Γ is introduced in the simulation. Current
results demonstrate that stability may be achieved by setting Γ = 0.1.
These steady states approach a maximum size that scales inversely
with reproduction age.
Abstract: The Wavelet-Galerkin finite element method for
solving the one-dimensional heat equation is presented in this work.
Two types of basis functions which are the Lagrange and multi-level
wavelet bases are employed to derive the full form of matrix system.
We consider both linear and quadratic bases in the Galerkin method.
Time derivative is approximated by polynomial time basis that
provides easily extend the order of approximation in time space. Our
numerical results show that the rate of convergences for the linear
Lagrange and the linear wavelet bases are the same and in order 2
while the rate of convergences for the quadratic Lagrange and the
quadratic wavelet bases are approximately in order 4. It also reveals
that the wavelet basis provides an easy treatment to improve
numerical resolutions that can be done by increasing just its desired
levels in the multilevel construction process.
Abstract: The work we have accomplished in implementing a
Mobile Payment mechanism that enables customers to pay bills for
groceries and other purchased items in a store through the means of a
mobile phone, specifically a Smartphone. The mode of transaction, as
far as communication between the customer-s handset and the
merchant-s POS is concerned, we have decided upon NFC (Near
Field Communication). This is due to the fact that for the most part,
Pakistani Smartphone users have handsets that have Android mobile
OS, which supports the aforementioned platform, IOS, on the other
hand does not.
Abstract: In this paper, the hardware implementation of the
RSA public-key cryptographic algorithm is presented. The RSA
cryptographic algorithm is depends on the computation of repeated
modular exponentials.
The Montgomery algorithm is used and modified to reduce
hardware resources and to achieve reasonable operating speed for
FPGA. An efficient architecture for modular multiplications based on
the array multiplier is proposed. We have implemented a RSA
cryptosystem based on Montgomery algorithm. As a result, it is
shown that proposed architecture contributes to small area and
reasonable speed.
Abstract: Global warming and continental changes have been
one of the people's issues in the recent years and its consequences
have appeared in the most parts of the earth planet or will appear in
the future. Temperature and Precipitation are two main parameters in
climatology. Any changes in these two parameters in this region
cause widespread changes in the ecosystem and its natural and
humanistic structure. One of the important consequences of this
procedure is change in surface and underground water resources.
Zayanderood watershed basin which is the main central river in Iran
has faced water shortage in the recent years and also it has resulted in
drought in Gavkhuni swamp and the river itself. Managers and
experts in provinces which are the Zayanderood water consumers
believe that global warming; raining decrease and continental
changes are the main reason of water decrease. By statistical
investigation of annual Precipitation and 46 years temperature of
internal and external areas of Zayanderood watershed basin's stations
and by using Kendal-man method, Precipitation and temperature
procedure changes have been analyzed in this basin. According to
obtained results, there was not any noticeable decrease or increase
procedure in Precipitation and annual temperature in the basin during
this period. However, regarding to Precipitation, a noticeable
decrease and increase have been observed in small part of western
and some parts of eastern and southern basin, respectively.
Furthermore, the investigation of annual temperature procedure has
shown that a noticeable increase has been observed in some parts of
western and eastern basin, and also a noticeable increasing procedure
of temperature in the central parts of metropolitan Esfahan can be
observed.
Abstract: purpose of this study was to investigate the current status of support services for students with special education needs (SEN) at colleges and universities in Taiwan. Seventy-two college and universities received a questionnaire on its resource room operation process and four resource room staffs each from different areas were interviewed through semi- structured interview forms. The main findings were (1) most colleges and universities did offer sufficient administrative resources; (2) more efforts on preventions for SEN students and establishment of disability awareness should be made for all campus faculties ; (3) more comprehensive services were required to help students to have better transition into post-school life; (4) most schools provided basic administrative resource requirements but qualities of the resource room programs needed to be enhanced; and (5) most resource room staffs lacked of professional knowledge in counseling the SEN students which needed to be strengthened in the future.
Abstract: In this paper, a benchmarking framework is presented
for the performance assessment of irrigations systems. Firstly, a data
envelopment analysis (DEA) is applied to measure the technical
efficiency of irrigation systems. This method, based on linear
programming, aims to determine a consistent efficiency ranking of
irrigation systems in which known inputs, such as water volume
supplied and total irrigated area, and a given output corresponding to
the total value of irrigation production are taken into account
simultaneously. Secondly, in order to examine the irrigation
efficiency in more detail, a cross – system comparison is elaborated
using a performance indicators set selected by IWMI. The above
methodologies were applied in Thessaloniki plain, located in
Northern Greece while the results of the application are presented and
discussed. The conjunctive use of DEA and performance indicators
seems to be a very useful tool for efficiency assessment and
identification of best practices in irrigation systems management.
Abstract: The principal focus of this study is on the
measurement and analysis of labor learnings in Pakistan. The study
at the aggregate economy level focus on the labor productivity
movements and at large-scale manufacturing level focus on the cost
structure, with isolating the contribution of the learning curve. The
analysis of S-shaped curve suggests that learnings are only below one
half of aggregate learning curve and other half shows the retardation
in learning, hence retardation in productivity movements. The study
implies the existence of learning economies in term of cost reduction
that is input cost per unit produced decreases by 0.51 percent every
time the cumulative production output doubles.
Abstract: The paper deals with quality labels used in the food products market, especially with labels of quality, labels of origin, and labels of organic farming. The aim of the paper is to identify perception of these labels by consumers in the Czech Republic. The first part refers to the definition and specification of food quality labels that are relevant in the Czech Republic. The second part includes the discussion of marketing research results. Data were collected with personal questioning method. Empirical findings on 150 respondents are related to consumer awareness and perception of national and European food quality labels used in the Czech Republic, attitudes to purchases of labelled products, and interest in information regarding the labels. Statistical methods, in the concrete Pearson´s chi-square test of independence, coefficient of contingency, and coefficient of association are used to determinate if significant differences do exist among selected demographic categories of Czech consumers.
Abstract: Experimental data from an atmospheric air/water terrain slugging case has been made available by the Shell Amsterdam research center, and has been subject to numerical simulation and comparison with a one-dimensional two-phase slug tracking simulator under development at the Norwegian University of Science and Technology. The code is based on tracking of liquid slugs in pipelines by use of a Lagrangian grid formulation implemented in Cµ by use of object oriented techniques. An existing hybrid spatial discretization scheme is tested, in which the stratified regions are modelled by the two-fluid model. The slug regions are treated incompressible, thus requiring a single momentum balance over the whole slug. Upon comparison with the experimental data, the period of the simulated severe slugging cycle is observed to be sensitive to slug generation in the horizontal parts of the system. Two different slug initiation methods have been tested with the slug tracking code, and grid dependency has been investigated.
Abstract: The review performed on the condition of energy
consumption & rate in Iran, shows that unfortunately the subject of
optimization and conservation of energy in active industries of
country lacks a practical & effective method and in most factories,
the energy consumption and rate is more than in similar industries of
industrial countries. The increasing demand of electrical energy and
the overheads which it imposes on the organization, forces
companies to search for suitable approaches to optimize energy
consumption and demand management. Application of value
engineering techniques is among these approaches. Value
engineering is considered a powerful tool for improving profitability.
These tools are used for reduction of expenses, increasing profits,
quality improvement, increasing market share, performing works in
shorter durations, more efficient utilization of sources & etc.
In this article, we shall review the subject of value engineering and
its capabilities for creating effective transformations in industrial
organizations, in order to reduce energy costs & the results have
been investigated and described during a case study in Mazandaran
wood and paper industries, the biggest consumer of energy in north
of Iran, for the purpose of presenting the effects of performed tasks
in optimization of energy consumption by utilizing value engineering
techniques in one case study.
Abstract: Decision fusion is one of hot research topics in
classification area, which aims to achieve the best possible
performance for the task at hand. In this paper, we
investigate the usefulness of this concept to improve change
detection accuracy in remote sensing. Thereby, outputs of
two fuzzy change detectors based respectively on
simultaneous and comparative analysis of multitemporal
data are fused by using fuzzy integral operators. This
method fuses the objective evidences produced by the
change detectors with respect to fuzzy measures that express
the difference of performance between them. The proposed
fusion framework is evaluated in comparison with some
ordinary fuzzy aggregation operators. Experiments carried
out on two SPOT images showed that the fuzzy integral was
the best performing. It improves the change detection
accuracy while attempting to equalize the accuracy rate in
both change and no change classes.
Abstract: In this study, the Taguchi method was used to optimize the effect of HALO structure or halo implant variations on threshold voltage (VTH) and leakage current (ILeak) in 45nm p-type Metal Oxide Semiconductor Field Effect Transistors (MOSFETs) device. Besides halo implant dose, the other process parameters which used were Source/Drain (S/D) implant dose, oxide growth temperature and silicide anneal temperature. This work was done using TCAD simulator, consisting of a process simulator, ATHENA and device simulator, ATLAS. These two simulators were combined with Taguchi method to aid in design and optimize the process parameters. In this research, the most effective process parameters with respect to VTH and ILeak are halo implant dose (40%) and S/D implant dose (52%) respectively. Whereas the second ranking factor affecting VTH and ILeak are oxide growth temperature (32%) and halo implant dose (34%) respectively. The results show that after optimizations approaches is -0.157V at ILeak=0.195mA/μm.
Abstract: Effective knowledge support relies on providing
operation-relevant knowledge to workers promptly and accurately. A
knowledge flow represents an individual-s or a group-s
knowledge-needs and referencing behavior of codified knowledge
during operation performance. The flow has been utilized to facilitate
organizational knowledge support by illustrating workers-
knowledge-needs systematically and precisely. However,
conventional knowledge-flow models cannot work well in cooperative
teams, which team members usually have diverse knowledge-needs in
terms of roles. The reason is that those models only provide one single
view to all participants and do not reflect individual knowledge-needs
in flows. Hence, we propose a role-based knowledge-flow view model
in this work. The model builds knowledge-flow views (or virtual
knowledge flows) by creating appropriate virtual knowledge nodes
and generalizing knowledge concepts to required concept levels. The
customized views could represent individual role-s knowledge-needs
in teamwork context. The novel model indicates knowledge-needs in
condensed representation from a roles perspective and enhances the
efficiency of cooperative knowledge support in organizations.
Abstract: It is impossible to think about democracy without elections. The litmus test of any electoral process in any country is the possibility of a one time minority to become a majority at another time and a peaceful transition of power. In many countries in Sub-Saharan Africa though the multi-party elections appeared to be competitive they failed the acid test of democracy: peaceful regime change in a free and fair election. Failure to solve electoral disputes might lead to bloody electoral conflicts as witnessed in many emerging democracies in Africa. The aim of this paper is to investigate electoral conflicts in Africa since the end of the Cold War by using the 2005 post-election violence in Ethiopia as a case study. In Ethiopia, the coming to power of the EPRDF in 1991 marked the fall of the Derg dictatorial military government and the beginning of a multi-party democracy. The country held multi-party parliamentary elections in 1995, 2000, and 2005 where the ruling EPRDF party “won" the elections through violence, involving intimidation, manipulation, detentions of political opponents, torture, and political assassinations. The 2005 electoral violence was the worst electoral violence in the country-s political history that led to the death of 193 protestors and the imprisonment of more than 40, 000 people. It is found out that the major causes of the 2005 Ethiopian election were the defeat of the ruling party in the election and its attempt to reverse the poll results by force; the Opposition-s lack of decisive leadership; the absence of independent courts and independent electoral management body; and the ruling party-s direct control over the army and police.
Abstract: RFID (Radio Frequency IDentification) system has
been widely used in our life, such as transport systems, passports,
automotive, animal tracking, human implants, library, and so on.
However, the RFID authentication protocols between RF (Radio
Frequency) tags and the RF readers have been bring about various
privacy problems that anonymity of the tags, tracking, eavesdropping,
and so on. Many researchers have proposed the solution of the
problems. However, they still have the problem, such as location
privacy, mutual authentication. In this paper, we show the problems of
the previous protocols, and then we propose a more secure and
efficient RFID authentication protocol.