Abstract: An on-line condition monitoring method for transmission line is proposed using electrical circuit theory and IT technology in this paper. It is reasonable that the circuit parameters such as resistance (R), inductance (L), conductance (g) and capacitance (C) of a transmission line expose the electrical conditions and physical state of the line. Those parameters can be calculated from the linear equation composed of voltages and currents measured by synchro-phasor measurement technique at both end of the line. A set of linear voltage drop equations containing four terminal constants (A, B ,C ,D ) are mathematical models of the transmission line circuits. At least two sets of those linear equations are established from different operation condition of the line, they may mathematically yield those circuit parameters of the line. The conditions of line connectivity including state of connecting parts or contacting parts of the switching device may be monitored by resistance variations during operation. The insulation conditions of the line can be monitored by conductance (g) and capacitance(C) measurements. Together with other condition monitoring devices such as partial discharge, sensors and visual sensing device etc.,they may give useful information to monitor out any incipient symptoms of faults. The prototype of hardware system has been developed and tested through laboratory level simulated transmission lines. The test has shown enough evident to put the proposed method to practical uses.
Abstract: Cyprus- offshore aquaculture industry has promising
prospects taking into account that Cyprus is an island. Its production
trend is increasing overtaking bigger countries such Greece and Italy.
However, current mooring systems seem to be under-performing
acting as obstacles for its future development. Furthermore, shallow
coastal waters scarcity due to competing industries dictates future
development to come by moving further from shore exposing fish
farms and subsequently mooring systems to harsher environmental
loadings. It is, therefore, of paramount importance to design mooring
systems based on engineering and scientific principles and leave
behind the present “trial and error" methods. This paper presents the
current state of Cyprus- offshore aquaculture industry and focuses of
its mooring designs by proposing a new methodology for designing
more reliable systems, hence ensuring its future.
Abstract: In the control theory one attempts to find a controller
that provides the best possible performance with respect to some
given measures of performance. There are many sorts of controllers
e.g. a typical PID controller, LQR controller, Fuzzy controller etc. In
the paper will be introduced polynomial controller with novel tuning
method which is based on the special pole placement encoding
scheme and optimization by Genetic Algorithms (GA). The examples
will show the performance of the novel designed polynomial
controller with comparison to common PID controller.
Abstract: In recent years, several severe large-scale influenza
outbreaks happened in many countries, such as SARS in 2005 or
H1N1 in 2009. Those influenza Epidemics have greatly impacts not
only on people-s life and health, but medical systems in different
countries. Although severe diseases are more experienced, they are not
fully controlled. Governments have different policies to control the
spreads of diseases. However, those policies have both positive and
negative social or economical influence on people and society.
Therefore, it is necessary and essential to develop an appropriate
model for evaluations of policies. Consequently, a proper measure can
be implemented to confront the diseases. The main goal of this study is
to develop a SIR-based model for the further evaluations of the
candidate policies during the influenza outbreaks.
Abstract: The paper reports the preparation and photocatalytic
activity of ZnO/SnO2 and SnO2 nanoparticles. These nanoparticles
were synthesized by hydrothermal method. The products were
characterized by X-ray diffraction (XRD) and scanning electron
microscopy (SEM). Their grain sizes are about 50-100 nm. The
photocatalytic activities of these materials were investigated for
congo red removal from aqueous solution under UV light irradiation.
It was shown that the use of ZnO/SnO2 as photocatalyst have better
photocatalytic activity for degradation of congo red than SnO2 or
TiO2 (anatase, particle size: 30nm) alone.
Abstract: Most real world systems express themselves formally
as a set of nonlinear algebraic equations. As applications grow, the
size and complexity of these equations also increase. In this work, we
highlight the key concepts in using the homotopy analysis method
as a methodology used to construct efficient iteration formulas for
nonlinear equations solving. The proposed method is experimentally
characterized according to a set of determined parameters which
affect the systems. The experimental results show the potential and
limitations of the new method and imply directions for future work.
Abstract: The Želazny Most tailing pond is one of the largest
facilities worldwide for waste disposal from the copper mines located
in South-West Poland. A potential failure of the dam would allow
more than 10 million cubic meters of contaminated slurry to flow to
the valley, causing immense environmental problems to the
surrounding area. Thus, the determination of the strength properties
of the dam's soils and their variability is of utmost importance.
An extensive site investigation consisting of more than 480 cone
penetration tests (CPTs) with or without pore water pressure
measurements were conducted within a period of 13 years to study
the mechanical properties of the tailings body. The present work
investigates the point variability of the soil strength parameters
(effective friction angle
Abstract: This paper introduces the application of seismic wave method in earthquake prediction and early estimation. The advantages of the seismic wave method over the traditional earthquake prediction method are demonstrated. An example is presented in this study to show the accuracy and efficiency of using the seismic wave method in predicting a medium-sized earthquake swarm occurred in Wencheng, Zhejiang, China. By applying this method, correct predictions were made on the day after this earthquake swarm started and the day the maximum earthquake occurred, which provided scientific bases for governmental decision-making.
Abstract: Nowadays, one of the most important problems of the
metropolises and the world large cities is the habitant traffic difficulty
and lack of sufficient parking site for the vehicles. Esfahan city as the
third metropolis of Iran has encountered with the vehicles parkingplace
problems in the most parts of fourteen regions of the city. The
non principled and non systematic dispersal and lack of parking sites
in the city has created an unfavorable status for its traffic and has
caused the air and sound pollutions increase; in addition, it wastes the
most portions of the citizenship and travelers' charge and time in
urban pathways and disturbs their mental and psychical calmness,
thus leads to their intensive dissatisfaction. In this study, by the usage
of AHP model in GIS environment, the effective criteria in selecting
the public parking sites have been combined with each other, and the
results of the created layers overlapping represent the parking
utilitarian vastness and widths. The achieved results of this research
indicate the pretty appropriate public parking sites selection in region
number 3 of Esfahan; but inconsequential dispersal and lack of these
parking sites in this region have caused abundant transportation
problems in Esfahan city.
Abstract: We present an implementation of an Online Exhibition System (OES) web service(s) that reflects our experiences with using web service development packages and software process models. The system provides major functionality that exists in similar packages. While developing such a complex web service, we gained insightful experience (i) in the traditional software development processes: waterfall model and evolutionary development and their fitness to web services development, (ii) in the fitness and effectiveness of a major web services development kit.
Abstract: Transmission network expansion planning (TNEP) is a basic part of power system planning that determines where, when and how many new transmission lines should be added to the network. Up till now, various methods have been presented to solve the static transmission network expansion planning (STNEP) problem. But in all of these methods, lines adequacy rate has not been considered at the end of planning horizon, i.e., expanded network misses adequacy after some times and needs to be expanded again. In this paper, expansion planning has been implemented by merging lines loading parameter in the STNEP and inserting investment cost into the fitness function constraints using genetic algorithm. Expanded network will possess a maximum adequacy to provide load demand and also the transmission lines overloaded later. Finally, adequacy index could be defined and used to compare some designs that have different investment costs and adequacy rates. In this paper, the proposed idea has been tested on the Garvers network. The results show that the network will possess maximum efficiency economically.
Abstract: This paper presents the optimal controller design of
the generator control unit in the aircraft power system. The adaptive
tabu search technique is applied to tune the controller parameters
until the best terminal output voltage of generator is achieved. The
output response from the system with the controllers designed by the
proposed technique is compared with those from the conventional
method. The transient simulations using the commercial software
package show that the controllers designed from the adaptive tabu
search algorithm can provide the better output performance compared
with the result from the classical method. The proposed design
technique is very flexible and useful for electrical aircraft engineers.
Abstract: Nowadays, manufacturers are facing great challenges
with regard to the production of green products due to the emerging issue of hazardous substance management (HSM). In particular,
environmental legislation pressures have yielded to increased risk,
manufacturing complexity and green components demands. The green principles were expanded to many departments within
organization, including supply chain. Green supply chain
management (GSCM) was emerging in the last few years. This idea
covers every stage in manufacturing from the first to the last stage of
life cycle. From product lifecycle concept, the cycle starts at the design of a product. QFD is a customer-driven product development
tool, considered as a structured management approach for efficiently
translating customer needs into design requirements and parts deployment, as well as manufacturing plans and controls in order to
achieve higher customer satisfaction. This paper develops an Eco-
QFD to provide a framework for designing Eco-mobile phone by integrating the life cycle analysis LCA into QFD throughout the entire product development process.
Abstract: This paper describes the performance of TCP Vegas
over the wireless IPv6 network. The performance of TCP Vegas is
evaluated using network simulator (ns-2). The simulation experiment
investigates how packet spacing affects the network delay, network
throughput and network efficiency of TCP Vegas. Moreover, we
investigate how the variable FTP packet sizes affect the network
performance. The result of the simulation experiment shows that as
the packet spacing is implements, the network delay is reduces,
network throughput and network efficiency is optimizes. As the FTP
packet sizes increase, the ratio of delay per throughput decreases.
From the result of experiment, we propose the appropriate packet size
in transmitting file transfer protocol application using TCP Vegas
with packet spacing enhancement over wireless IPv6 environment in
ns-2. Additionally, we suggest the appropriate ratio in determining
the appropriate RTT and buffer size in a network.
Abstract: In this article, LQR based PID controller design for
3DOF helicopter system is investigated. The 3-DOF helicopter
system is a benchmark laboratory model having strongly nonlinear
characteristics and unstable dynamics which make the control of such
system a challenging task. This article first presents the mathematical
model of the 3DOF helicopter system and then illustrates the basic
idea and technical formulation for controller design. The paper
explains the simple approach for the approximation of PID design
parameters from the LQR controller gain matrix. The simulation
results show that the investigated controller has both static and
dynamic performance, therefore the stability and the quick control
effect can be obtained simultaneously for the 3DOF helicopter
system.
Abstract: Nowadays predicting political risk level of country
has become a critical issue for investors who intend to achieve
accurate information concerning stability of the business
environments. Since, most of the times investors are layman and
nonprofessional IT personnel; this paper aims to propose a
framework named GECR in order to help nonexpert persons to
discover political risk stability across time based on the political
news and events.
To achieve this goal, the Bayesian Networks approach was
utilized for 186 political news of Pakistan as sample dataset.
Bayesian Networks as an artificial intelligence approach has been
employed in presented framework, since this is a powerful technique
that can be applied to model uncertain domains. The results showed
that our framework along with Bayesian Networks as decision
support tool, predicted the political risk level with a high degree of
accuracy.
Abstract: Realistic 3D face model is more precise in representing
pose, illumination, and expression of face than 2D face model so that it
can be utilized usefully in various applications such as face recognition,
games, avatars, animations, and etc.
In this paper, we propose a 3D face modeling method based on 3D
dense morphable shape model. The proposed 3D modeling method
first constructs a 3D dense morphable shape model from 3D face scan
data obtained using a 3D scanner. Next, the proposed method extracts
and matches facial landmarks from 2D image sequence containing a
face to be modeled, and then reconstructs 3D vertices coordinates of
the landmarks using a factorization-based SfM technique. Then, the
proposed method obtains a 3D dense shape model of the face to be
modeled by fitting the constructed 3D dense morphable shape model
into the reconstructed 3D vertices. Also, the proposed method makes a
cylindrical texture map using 2D face image sequence. Finally, the
proposed method generates a 3D face model by rendering the 3D dense
face shape model using the cylindrical texture map. Through building
processes of 3D face model by the proposed method, it is shown that
the proposed method is relatively easy, fast and precise.
Abstract: Electronic commerce is growing rapidly with on-line
sales already heading for hundreds of billion dollars per year. Due to
the huge amount of money transferred everyday, an increased
security level is required. In this work we present the architecture of
an intelligent speaker verification system, which is able to accurately
verify the registered users of an e-commerce service using only their
voices as an input. According to the proposed architecture, a
transaction-based e-commerce application should be complemented
by a biometric server where customer-s unique set of speech models
(voiceprint) is stored. The verification procedure requests from the
user to pronounce a personalized sequence of digits and after
capturing speech and extracting voice features at the client side are
sent back to the biometric server. The biometric server uses pattern
recognition to decide whether the received features match the stored
voiceprint of the customer who claims to be, and accordingly grants
verification. The proposed architecture can provide e-commerce
applications with a higher degree of certainty regarding the identity
of a customer, and prevent impostors to execute fraudulent
transactions.
Abstract: In this paper, an analysis of a target location estimation
system using the best linear unbiased estimator (BLUE) for high
performance radar systems is presented. In synthetic environments,
we are here concerned with three key elements of radar system
modeling, which makes radar systems operates accurately in strategic
situation in virtual ground. Radar Cross Section (RCS) modeling
is used to determine the actual amount of electromagnetic waves
that are reflected from a tactical object. Pattern Propagation Factor
(PPF) is an attenuation coefficient of the radar equation that contains
the reflection from the surface of the earth, the diffraction, the
refraction and scattering by the atmospheric environment. Clutter is
the unwanted echoes of electronic systems. For the data fusion of
output results from radar detection in synthetic environment, BLUE
is used and compared with the mean values of each simulation results.
Simulation results demonstrate the performance of the radar system.
Abstract: In this paper we introduce new data oriented modeling
of uniform random variable well-matched with computing systems. Due to this conformity with current computers structure, this modeling will be efficiently used in statistical inference.