Abstract: Saudi Arabia is an arid country which depends on
costly desalination plants to satisfy the growing residential water
demand. Prediction of water demand is usually a challenging task
because the forecast model should consider variations in economic
progress, climate conditions and population growth. The task is
further complicated knowing that Mecca city is visited regularly by
large numbers during specific months in the year due to religious
occasions. In this paper, a neural networks model is proposed to
handle the prediction of the monthly and yearly water demand for
Mecca city, Saudi Arabia. The proposed model will be developed
based on historic records of water production and estimated visitors-
distribution. The driving variables for the model include annuallyvarying
variables such as household income, household density, and
city population, and monthly-varying variables such as expected
number of visitors each month and maximum monthly temperature.
Abstract: While the problem based learning (PBL) approach promotes unsupervised self-directed learning (SDL), many students experience difficulty juggling the role of being an information recipient and information seeker. Logbooks have been used to assess trainee doctors but not in other areas. This study aimed to determine the effectiveness of logbook for assessing SDL during PBL sessions in first year medical students. The log book included a learning checklist and knowledge and skills components. Comparisons with the baseline assessment of student performance in PBL and that at semester end after logbook intervention showed significant improvements in student performance (31.5 ± 8 vs. 17.7 ± 4.4; p
Abstract: An ultrasound-assisted activation method for
electroless silver plating is presented in this study. When the
ultrasound was applied during the activation step, the amount of the Pd
species adsorbed on substrate surfaces was higher than that of sample
pretreated with a conventional activation process without ultrasound
irradiation. With this activation method, it was also shown that the
adsorbed Pd species with a size of about 5 nm were uniformly
distributed on the surfaces, thus a smooth and uniform coating on the
surfaces was obtained by subsequent electroless silver plating. The
samples after each step were characterized by AFM, XPS, FIB, and
SEM.
Abstract: The paper reviews the relationship between spatial
and transportation planning in the Southern African Development
Community (SADC) region of Sub-Saharan Africa. It argues that
most urbanisation in the region has largely occurred subsequent to
the 1950s and, accordingly, urban development has been
profoundly and negatively affected by the (misguided) spatial and
institutional tenets of modernism. It demonstrates how a
considerable amount of the poor performance of these settlements
can be directly attributed to this. Two factors in particular about the
planning systems are emphasized: the way in which programmatic
land-use planning lies at the heart of both spatial and transportation
planning; and the way on which transportation and spatial planning
have been separated into independent processes. In the final
section, the paper identifies ways of improving the planning
system. Firstly, it identifies the performance qualities which
Southern African settlements should be seeking to achieve.
Secondly, it focuses on two necessary arenas of change: the need to
replace programmatic land-use planning practices with structuralspatial
approaches; and it makes a case for making urban corridors
a spatial focus of integrated planning, as a way of beginning the
restructuring and intensification of settlements which are currently
characterised by sprawl, fragmentation and separation
Abstract: Risk of infectious disease outbreaks is related to the
hygiene among the population. To assess the actual risks and modify
the relevant emergency procedures if necessary, a hygiene survey
was conducted among undergraduate students on the Rhodes
University campus. Soap was available to 10.5% and only 26.8% of
the study participants followed proper hygiene in relation to food
consumption. This combination increases the risk of infectious
disease outbreaks at the campus. Around 83.6% were willing to wash
their hands if soap was provided. Procurement and availability of
soap in undergraduate residences on campus should be improved, as
the total cost is estimated at only 2000 USD per annum. Awareness
campaigns about food-related hygiene and the need for regular handwashing
with soap should be run among Rhodes University students.
If successful, rates of respiratory and hygiene-related diseases will be
decreased and emergency health management simplified.
Abstract: One of the criteria in production scheduling is Make
Span, minimizing this criteria causes more efficiently use of the
resources specially machinery and manpower. By assigning some
budget to some of the operations the operation time of these activities
reduces and affects the total completion time of all the operations
(Make Span). In this paper this issue is practiced in parallel flow
shops. At first we convert parallel flow shop to a network model and
by using a linear programming approach it is identified in order to
minimize make span (the completion time of the network) which
activities (operations) are better to absorb the predetermined and
limited budget. Minimizing the total completion time of all the
activities in the network is equivalent to minimizing make span in
production scheduling.
Abstract: This paper presents modeling and simulation of Grid Connected Photovoltaic (PV) system by using improved mathematical model. The model is used to study different parameter variations and effects on the PV array including operating temperature and solar irradiation level. In this paper stepped P&O algorithm is proposed for MPPT control. This algorithm will identify the suitable duty ratio in which the DC-DC converter should be operated to maximize the power output. Photo voltaic array with proposed stepped P&O-MPPT controller can operate in the maximum power point for the whole range of solar data (irradiance and temperature).
Abstract: Today with the rapid growth of telecommunications equipment, electronic and developing more and more networks of power, influence of electromagnetic waves on one another has become hot topic discussions. So in this article, this issue and appropriate mechanisms for EMC operations have been presented. First, impact of high voltage lines on the surrounding environment especially on the control room has been investigated, then to reduce electromagnetic radiation, various methods of shielding are provided and shielding effectiveness of them has been compared. It should be expressed that simulations have been done by the finite element method (FEM).
Abstract: Work is focused to the study of unburned carbon in
ash from coal (and wastes) combustion in 8 combustion tests at 3
fluidised-bed power station, at co-combustion of coal and wastes
(also at fluidized bed) and at bench-scale unit simulating coal
combustion in small domestic furnaces. The attention is paid to
unburned carbon contents in bottom ashes and fly ashes at these 8
combustion tests and to morphology of unburned carbons. Specific
surface area of coals, unburned carbons and ashes and the relation of
specific surface area of unburned carbon and the content of volatile
combustibles in coal were studied as well.
Abstract: Seismic qualification testing for equipments to be
mounted on upper storeys of buildings is very demanding in terms of
floor spectra. The latter is characterized by high accelerations
amplitudes within a narrow frequency band. This article presents a
method which permits to cover specified required response spectra
beyond the shaking table capability by amplifying the acceleration
amplitudes at an appropriate frequency range using a physical
intermediate mounted on the platform of the shaker.
Abstract: This paper describes the two actual tendencies in the
software development process usage: 'Scrum' and 'work in home
office'. It-s exposed the four main challenges to adopt Scrum
framework for distributed teams in this cited kind of work. The
challenges are mainly based on the communication problems due
distances since the Scrum encourages the team to work together in
the same room, and this is not possible when people work distributed
in their homes.
Abstract: The Kinetics formation of labile Complex
Ag (I) tetra (p-carboxyphenyl) porphyrin, was investigated at 25oC
and I=0.1M (NaNO3). By spectrophotometric titration, the
composition ratio of the complex was established to be 2:1
(Ag : H2TCPP). The equilibrium constant, K, was found to be
log 10-6.53. Binding of the first Ag (I) was found to be rate
determining step with rate constant, k1= 4.67×102 . A plausible
mechanism is discussed. We discus theoretically why Ag(I)2TCPP is
unstable.
Abstract: Wireless sensor networks (WSN) are currently
receiving significant attention due to their unlimited potential. These
networks are used for various applications, such as habitat
monitoring, automation, agriculture, and security. The efficient nodeenergy
utilization is one of important performance factors in wireless
sensor networks because sensor nodes operate with limited battery
power. In this paper, we proposed the MiSense hierarchical cluster
based routing algorithm (MiCRA) to extend the lifetime of sensor
networks and to maintain a balanced energy consumption of nodes.
MiCRA is an extension of the HEED algorithm with two levels of
cluster heads. The performance of the proposed protocol has been
examined and evaluated through a simulation study. The simulation
results clearly show that MiCRA has a better performance in terms of
lifetime than HEED. Indeed, MiCRA our proposed protocol can
effectively extend the network lifetime without other critical
overheads and performance degradation. It has been noted that there
is about 35% of energy saving for MiCRA during the clustering
process and 65% energy savings during the routing process compared
to the HEED algorithm.
Abstract: Synthesis gas manufacturing by steam reforming of hydrocarbons is an important industrial process. High endothermic nature of the process makes it one of the most cost and heat intensive processes. In the present work, composite effect of different inert gases on synthesis gas yield, feed gas conversion and temperature distribution along the reactor length has been studied using a heterogeneous model. Mathematical model was developed as a first stage and validated against the existing process models. With the addition of inert gases, a higher yield of synthesis gas is observed. Simultaneously the rector outlet temperature drops to as low as 810 K. It was found that Xenon gives the highest yield and conversion while Helium gives the lowest temperature. Using Xenon inert gas 20 percent reduction in outlet temperature was observed compared to traditional case.
Abstract: This paper presents two simplified models to
determine nodal voltages in power distribution networks. These
models allow estimating the impact of the installation of reactive
power compensations equipments like fixed or switched capacitor
banks. The procedure used to develop the models is similar to the
procedure used to develop linear power flow models of transmission
lines, which have been widely used in optimization problems of
operation planning and system expansion. The steady state non-linear
load flow equations are approximated by linear equations relating the
voltage amplitude and currents. The approximations of the linear
equations are based on the high relationship between line resistance
and line reactance (ratio R/X), which is valid for power distribution
networks. The performance and accuracy of the models are evaluated
through comparisons with the exact results obtained from the
solution of the load flow using two test networks: a hypothetical
network with 23 nodes and a real network with 217 nodes.
Abstract: In some real applications of Statistical Process Control
it is necessary to design a control chart to not detect small process
shifts, but keeping a good performance to detect moderate and large
shifts in the quality. In this work we develop a new quality control
chart, the synthetic T2 control chart, that can be designed to cope with
this objective. A multi-objective optimization is carried out employing
Genetic Algorithms, finding the Pareto-optimal front of
non-dominated solutions for this optimization problem.
Abstract: Arms detection is one of the fundamental problems in
human motion analysis application. The arms are considered as the
most challenging body part to be detected since its pose and speed
varies in image sequences. Moreover, the arms are usually occluded
with other body parts such as the head and torso. In this paper,
histogram-based skin colour segmentation is proposed to detect the
arms in image sequences. Six different colour spaces namely RGB,
rgb, HSI, TSL, SCT and CIELAB are evaluated to determine the best
colour space for this segmentation procedure. The evaluation is
divided into three categories, which are single colour component,
colour without luminance and colour with luminance. The
performance is measured using True Positive (TP) and True Negative
(TN) on 250 images with manual ground truth. The best colour is
selected based on the highest TN value followed by the highest TP
value.
Abstract: Fly ash is a significant waste that is released of
thermal power plants and defined as very fine particles that are drifted upward with up taken by the flue gases due to the burning of
used coal [1]. The fly-ash is capable of removing organic
contaminants in consequence of high carbon content, a large surface area per unit volume and contained heavy metals. Therefore, fly ash
is used as an effective coagulant and adsorbent by pelletization [2, 3].
In this study, the possibility of use of fly ash taken from Turkey like low-cost adsorbent for adsorption of zinc ions found in waste
water was investigated. The fly ash taken from Turkey was pelletized with bentonite and molass to evaluate the adsorption capaticity. For
this purpose; analyses such as sieve analysis, XRD, XRF, FTIR and SEM were performed. As a result, it was seen that pellets prepared
from fly ash, bentonite and molass would be used for zinc adsorption.
Abstract: This research was conducted for the first time at the
southeastern coasts of the Caspian Sea in order to evaluate the
performance of osteichthyes cooperatives through production (catch)
function. Using one of the indirect valuation methods in this research,
contributory factors in catch were identified and were inserted into
the function as independent variables. In order to carry out this
research, the performance of 25 Osteichthyes catching cooperatives
in the utilization year of 2009 which were involved in fishing in
Miankale wildlife refuge region. The contributory factors in catch
were divided into groups of economic, ecological and biological
factors. In the mentioned function, catch rate of the cooperative were
inserted into as the dependant variable and fourteen partial variables
in terms of nine general variables as independent variables. Finally,
after function estimation, seven variables were rendered significant at
99 percent reliably level. The results of the function estimation
indicated that human resource (fisherman quantity) had the greatest
positive effect on catch rate with an influence coefficient of 1.7 while
weather conditions had the greatest negative effect on the catch rate
of cooperatives with an influence coefficient of -2.07. Moreover,
factors like member's share, experience and fisherman training and
fishing effort played the main roles in the catch rate of cooperative
with influence coefficients of 0.81, 0.5 and 0.21, respectively.
Abstract: A 10bit, 40 MSps, sample and hold, implemented in 0.18-μm CMOS technology with 3.3V supply, is presented for application in the front-end stage of an analog-to-digital converter. Topology selection, biasing, compensation and common mode feedback are discussed. Cascode technique has been used to increase the dc gain. The proposed opamp provides 149MHz unity-gain bandwidth (wu), 80 degree phase margin and a differential peak to peak output swing more than 2.5v. The circuit has 55db Total Harmonic Distortion (THD), using the improved fully differential two stage operational amplifier of 91.7dB gain. The power dissipation of the designed sample and hold is 4.7mw. The designed system demonstrates relatively suitable response in different process, temperature and supply corners (PVT corners).