Abstract: The Port of Townsville conducts regular annual
maintenance dredging to maintain depths of its harbor basin and
approach channels for the navigational safety of the vessels against
the natural accumulation of marine sediments. In addition to the
regular maintenance dredging, the port undertakes emergency
dredging in cases where large quantities of sediments are mobilized
and deposited in port waters by cyclone or major flood events. The
maintenance dredging material derived from the port may be
disposed at sea or on land in accordance with relevant state and
commonwealth regulations. For the land disposal, the dredged mud
slurry is hydraulically placed into containment ponds and left to
undergo sedimentation and self-weight consolidation to form fill
material for land reclamation. This paper provides an overview of the
maintenance dredging at the Port of Townsville and emphasis on
maintenance dredging requirements, sediment quality, bathymetry,
dredging methods used, and dredged material disposal options.
Abstract: Metallic foams have good potential for lightweight
structures for impact and blast mitigation. Therefore it is important to
find out the optimized foam structure (i.e. cell size, shape, relative
density, and distribution) to maximise energy absorption. In this
paper, quasistatic compression and microstructural characterization
of closed-cell aluminium foams of different pore size and cell
distributions have been carried out. We present results for two
different aluminium metal foams of density 0.49-0.51 g/cc and 0.31-
0.34 g/cc respectively that have been tested in quasi-static
compression. The influence of cell geometry and cell topology on
quasistatic compression behaviour has been investigated using optical
microscope and computed tomography (micro-CT) analysis. It is
shown that the deformation is not uniform in the structure and
collapse begins at the weakest point.
Abstract: In this paper, the effect of WC-12Co particle
temperature in HVOF thermal spraying process on the coating
thickness has been studied. The statistical results show that the spray
distance and oxygen-to-fuel ratio are effective factors on particle
characterization and thickness of HVOF thermal spraying coatings.
Spray Watch diagnostic system, scanning electron microscopy
(SEM), X-ray diffraction and thickness measuring system were used
for this purpose.
Abstract: The parameters of a two-layer soil can be determined by
processing resistivity data obtained from resistivity measurements
carried out on the soil of interest. The processing usually entails
applying the resistivity data as inputs to an optimisation function.
This paper proposes an algorithm which utilises the square error as an
optimisation function. Resistivity data from previous works were
applied to test the accuracy of the new algorithm developed and the
result obtained conforms significantly to results from previous works.
Abstract: Mech-Degla, Degla-Beida and Frezza are the date
(Phoenix dactylifera L.) common varieties with a more or less good
availability and feeble trade value. Some morphologic and
physicochemical factors were determined. Results show that the
whole date weight is significantly different (P= 95%) concerning
Mech-Degla and Degla-Beida which are more commercialized than
Frezza whereas the pulp mass proportion in relation to whole fruits is
highest for Frezza (88.28%). Moreover, there is a large variability
concerning the weights and densities of constitutive tissues in each
variety. The white tissue is dominant in Mech-Degla in opposite to
the two other varieties. The variance analyze showed that the
difference in weights between brown and white tissues is significant
(P = 95%) for all studied varieties. Some other morphologic and
chemical proprieties of the whole pulps and their two constitutive
parts (brown or pigmented and white) are also investigated. The
predominance of phenolics in Mech-Degla (4.01g/100g, w.b) and
Frezza (4.96 g/100g, w.b) pulps brown part is the main result
revealed in this study.
Abstract: Hot aqueous and methanol extracts of the two selected
herbal medicines such are Vellarugu chooranam (V.C) and
Amukkirai Chooranam (A.C) were examined for total phenolic and
flavonoid contents and in vitro antioxidant activity using four
different methods. The total phenolic and flavonoid contents in
methanol extract of V.C were found to be higher (44.41±1.26mg
GAE/g; 174.44±9.32mg QE/g) than in the methanol extract of A.C
(20.56±0.67mg GAE/g; 7.21±0.85mg QE/g). Hot methanol and
aqueous extracts of both medicines showed low antioxidant activity
in DPPH, ABTS, and FRAP methods and Iron chelating activity not
found at highest possible concentration. V.C contains higher
concentrations of total phenolic and flavonoid contents than A.C and
can also exert greater antioxidant activity than A.C, although the
activities demonstrated were lower than the positive control Trolox.
The in vitro antioxidant activity was not related with the total
phenolic and flavonoid contents of the methanol and aqueous extracts
of both herbal medicines (A.C and V.C).
Abstract: This study proposes the transformation of nonlinear
Magnetic Levitation System into linear one, via state and feedback
transformations using explicit algorithm. This algorithm allows
computing explicitly the linearizing state coordinates and feedback
for any nonlinear control system, which is feedback linearizable,
without solving the Partial Differential Equations. The algorithm is
performed using a maximum of N-1 steps where N being the
dimension of the system.
Abstract: This paper considers the characterization of a complex
electromagnetic environment due to multiple sources of
electromagnetic radiation as a five-dimensional surface which can be
described by a set of several surface sections including: instant EM
field intensity distribution maps at a given frequency and altitude,
instantaneous spectrum at a given location in space and the time
evolution of the electromagnetic field spectrum at a given point in
space. This characterization if done over time can enable the
exposure levels of Radio Frequency Radiation at every point in the
analysis area to be determined and results interpreted based on
comparison of the determined RFR exposure level with the safe
guidelines for general public exposure given by recognized body
such as the International commission on non-ionizing radiation
protection (ICNIRP), Institute of Electrical and Electronic Engineers
(IEEE), the National Radiation Protection Authority (NRPA).
Abstract: reliability-based methodology for the assessment
and evaluation of reinforced concrete (R/C) structural elements of
concrete structures is presented herein. The results of the reliability
analysis and assessment for R/C structural elements were verified by
the results obtained through deterministic methods. The outcomes of
the reliability-based analysis were compared against currently
adopted safety limits that are incorporated in the reliability indices
β’s, according to international standards and codes. The methodology
is based on probabilistic analysis using reliability concepts and
statistics of the main random variables that are relevant to the subject
matter, and for which they are to be used in the performance-function
equation(s) associated with the structural elements under study.
These methodology techniques can result in reliability index β, which
is commonly known as the reliability index or reliability measure
value that can be utilized to assess and evaluate the safety, human
risk, and functionality of the structural component. Also, these
methods can result in revised partial safety factor values for certain
target reliability indices that can be used for the purpose of
redesigning the R/C elements of the building and in which they could
assist in considering some other remedial actions to improve the
safety and functionality of the member.
Abstract: Innovations not only contribute to competitiveness of
the company but have also positive effects on revenues. On average,
product innovations account to 14 percent of companies’ sales.
Innovation management has substantially changed during the last
decade, because of growing reliance on external partners. As a
consequence, a new task for purchasing arises, as firms need to
understand which suppliers actually do have high potential
contributing to the innovativeness of the firm and which do not.
Proper organization of the purchasing function is important since
for the majority of manufacturing companies deal with substantial
material costs which pass through the purchasing function. In the past
the purchasing function was largely seen as a transaction-oriented,
clerical function but today purchasing is the intermediate with supply
chain partners contributing to innovations, be it product or process
innovations. Therefore, purchasing function has to be organized
differently to enable firm innovation potential.
However, innovations are inherently risky. There are behavioral
risk (that some partner will take advantage of the other party),
technological risk in terms of complexity of products and processes
of manufacturing and incoming materials and finally market risks,
which in fact judge the value of the innovation. These risks are
investigated in this work. Specifically, technological risks which deal
with complexity of the products, and processes will be investigated
more thoroughly. Buying components or such high edge technologies
necessities careful investigation of technical features and therefore is
usually conducted by a team of experts. Therefore it is hypothesized
that higher the technological risk, higher will be the centralization of
the purchasing function as an interface with other supply chain
members.
Main contribution of this research lies is in the fact that analysis
was performed on a large data set of 1493 companies, from 25
countries collected in the GMRG 4 survey. Most analyses of
purchasing function are done by case study analysis of innovative
firms. Therefore this study contributes with empirical evaluations that
can be generalized.
Abstract: In the culture of Thailand, the Yak serve as a mediated
icon representing strength, power, and mystical protection not only
for the Buddha, but for population of worshipers. Originating from
the forests of China, the Yak continues to stand guard at the gates of
Buddhist temples. The Yak represents Thai culture in the hearts of
Thai people. This paper presents a qualitative study regarding the
curious mix of media, culture, and religion that projects the Yak of
Thailand as a larger than life message throughout the political,
cultural, and religious spheres. The gate guardians, or gods as they
are sometimes called, appear throughout the religious temples of
Asian cultures. However, the Asian cultures demonstrate differences
in artistic renditions (or presentations) of such sentinels. Thailand
gate guards (the Yak) stand in front of many Buddhist temples, and
these iconic figures display unique features with varied symbolic
significance. The temple (or wat), plays a vital role in every
community; and, for many people, Thailand’s temples are the
country’s most endearing sights. The authors applied folknography as
a methodology to illustrate the importance of the Thai Yak in serving
as meaningful icons that transcend not only time, but the culture,
religion, and mass media. The Yak represents mythical, religious,
artistic, cultural, and militaristic significance for the Thai people.
Data collection included interviews, focus groups, and natural
observations. This paper summarizes the perceptions of the Thai
people concerning their gate sentries and the relationship,
communication, connection, and the enduring respect that Thai
people hold for their guardians of the gates.
Abstract: The goal of this article is the analysis of knowledge
transfer at the regional level of the Czech Republic. We show how
goals of enterprises´ innovative activities are related to the rate of
cooperation with different actors within regional innovative systems
as well as in other world regions. The results show that the most
important partners of enterprises are their suppliers and clients in
most Czech regions. The cooperation rate of enterprises correlates
significantly mainly with enterprises´ efforts to enter new markets
and reduce labour costs per unit output. The meaning of this
cooperation decreases with the increase of partner’s distance.
Regarding the type of a cooperating partner, cooperation within an
enterprise had to do with the increase of market share and decrease of
labour costs. On the other hand, cooperation with clients had to do
with efforts to replace outdated products or processes or enter new
markets. We can pay less attention to the cooperation with
government authorities and organizations. The reasons for
marginalization of this cooperation should be submitted to further
detailed investigation.
Abstract: Different strategies and tools are available at the oil
and gas industry for detecting and analyzing tension and possible
fractures in borehole walls. Most of these techniques are based on
manual observation of the captured borehole images. While this
strategy may be possible and convenient with small images and few
data, it may become difficult and suitable to errors when big
databases of images must be treated. While the patterns may differ
among the image area, depending on many characteristics (drilling
strategy, rock components, rock strength, etc.). In this work we
propose the inclusion of data-mining classification strategies in order
to create a knowledge database of the segmented curves. These
classifiers allow that, after some time using and manually pointing
parts of borehole images that correspond to tension regions and
breakout areas, the system will indicate and suggest automatically
new candidate regions, with higher accuracy. We suggest the use of
different classifiers methods, in order to achieve different knowledge
dataset configurations.
Abstract: The paper is focused on the methods to solutions of
the crisis situation in the Czech Republic associated with the mass
methanol poisoning. The emphasis is put on tasks of individual state
bodies and of Integrated Rescue System during the handling of the
crisis.
The theoretical part describes poisonings, ways of intoxication,
types of intoxicants and cases of mass poisoning by dangerous
substances in the world.
The practical part describes the development, causes and solutions
of extraordinary event, mass methanol poisoning in the Czech
Republic. The main emphasis was put on the crisis management of
the Czech Republic in solving this situation.
Abstract: Characterization of the engineering behavior of
unsaturated soil is dependent on the soil-water characteristic curve
(SWCC), a graphical representation of the relationship between water
content or degree of saturation and soil suction. A reasonable
description of the SWCC is thus important for the accurate prediction
of unsaturated soil parameters. The measurement procedures for
determining the SWCC, however, are difficult, expensive, and timeconsuming.
During the past few decades, researchers have laid a
major focus on developing empirical equations for predicting the
SWCC, with a large number of empirical models suggested. One of
the most crucial questions is how precisely existing equations can
represent the SWCC. As different models have different ranges of
capability, it is essential to evaluate the precision of the SWCC
models used for each particular soil type for better SWCC estimation.
It is expected that better estimation of SWCC would be achieved via
a thorough statistical analysis of its distribution within a particular
soil class. With this in view, a statistical analysis was conducted in
order to evaluate the reliability of the SWCC prediction models
against laboratory measurement. Optimization techniques were used
to obtain the best-fit of the model parameters in four forms of SWCC
equation, using laboratory data for relatively coarse-textured (i.e.,
sandy) soil. The four most prominent SWCCs were evaluated and
computed for each sample. The result shows that the Brooks and
Corey model is the most consistent in describing the SWCC for sand
soil type. The Brooks and Corey model prediction also exhibit
compatibility with samples ranging from low to high soil water
content in which subjected to the samples that evaluated in this study.
Abstract: This paper involved the performance of a hightemperature
X-Ray powder diffraction analysis (XRD) of a sample of
chemical gypsum generated in the production of titanium white; this
gypsum originates by neutralizing highly acidic water with limestone
suspension. Specifically, it was gypsum formed in the first stage of
neutralization when the resulting material contains, apart from
gypsum, a number of waste products resulting from the
decomposition of ilmenite by sulphuric acid. So it can be described as
red titanogypsum. By conducting the experiment using XRD
apparatus Bruker D8 Advance with a Cu anode (λkα=1.54184 Å)
equipped with high-temperature chamber Anton Paar HTK 16, it was
possible to identify clearly in the sample each phase transition in the
system of CaSO4·xH2O.
Abstract: This study aimed at investigating whether the
functional brain networks constructed using the initial EEG (obtained
when patients first visited hospital) can be correlated with the
progression of cognitive decline calculated as the changes of
mini-mental state examination (MMSE) scores between the latest and
initial examinations. We integrated the time–frequency cross mutual
information (TFCMI) method to estimate the EEG functional
connectivity between cortical regions, and the network analysis based
on graph theory to investigate the organization of functional networks
in aMCI. Our finding suggested that higher integrated functional
network with sufficient connection strengths, dense connection
between local regions, and high network efficiency in processing
information at the initial stage may result in a better prognosis of the
subsequent cognitive functions for aMCI. In conclusion, the functional
connectivity can be a useful biomarker to assist in prediction of
cognitive declines in aMCI.
Abstract: Brain functional networks based on resting-state EEG
data were compared between patients with mild Alzheimer’s disease
(mAD) and matched patients with amnestic subtype of mild cognitive
impairment (aMCI). We integrated the time–frequency cross mutual
information (TFCMI) method to estimate the EEG functional
connectivity between cortical regions and the network analysis based
on graph theory to further investigate the alterations of functional
networks in mAD compared with aMCI group. We aimed at
investigating the changes of network integrity, local clustering,
information processing efficiency, and fault tolerance in mAD brain
networks for different frequency bands based on several topological
properties, including degree, strength, clustering coefficient, shortest
path length, and efficiency. Results showed that the disruptions of
network integrity and reductions of network efficiency in mAD
characterized by lower degree, decreased clustering coefficient, higher
shortest path length, and reduced global and local efficiencies in the
delta, theta, beta2, and gamma bands were evident. The significant
changes in network organization can be used in assisting
discrimination of mAD from aMCI in clinical.
Abstract: Caused by shorter product life cycles and higher
product variety the importance of production ramp ups is increasing.
Even though companies are aware of that fact, up to 40% of the ramp
up projects still miss technical and economical requirements. The
success of a ramp up depends on the planning of human factors,
organizational aspects and technological solutions. Since only partly
considered in scientific literature, this paper lays its focus on the
human factor during production ramp up. There are only incoherent
methods which address the problems in this area. A systematic and
holistic method to improve the capabilities of the employees during
ramp up is missing. The Harada Method is a relatively young
approach for developing highly-skilled workers. It consists of
different worksheets which help employees to set guidelines and
reach overall objectives. This approach is going to be transferred into
a tool for ramp up management.