Abstract: Detecting changes in multiple images of the same
scene has recently seen increased interest due to the many
contemporary applications including smart security systems, smart
homes, remote sensing, surveillance, medical diagnosis, weather
forecasting, speed and distance measurement, post-disaster forensics
and much more. These applications differ in the scale, nature, and
speed of change. This paper presents an application of image
processing techniques to implement a real-time change detection
system. Change is identified by comparing the RGB representation of
two consecutive frames captured in real-time. The detection threshold
can be controlled to account for various luminance levels. The
comparison result is passed through a filter before decision making to
reduce false positives, especially at lower luminance conditions. The
system is implemented with a MATLAB Graphical User interface
with several controls to manage its operation and performance.
Abstract: The aim of this paper is to analyze the impact of
literature review software on researchers. The aim of this study was
achieved by analyzing models in terms of perceived usefulness,
perceived ease of use, and acceptance level. Collected data were
analyzed using WarpPLS 4.0 software. This study used two
theoretical frameworks, namely, Technology Acceptance Model and
the Training Needs Assessment Model. The study was experimental
and was conducted at a public university in South Africa. The results
of the study showed that acceptance level has a high impact on
research productivity followed by perceived usefulness and perceived
ease of use.
Abstract: Cost overruns are a persistent problem in oil and gas
megaprojects. Whilst the extant literature is filled with studies on
incidents and causes of cost overruns, underlying theories to explain
their emergence in oil and gas megaprojects are few. Yet, a way to
contain the syndrome of cost overruns is to understand the bases of
‘how and why’ they occur. Such knowledge will also help to develop
pragmatic techniques for better overall management of oil and gas
megaprojects. The aim of this paper is to explain the development of
cost overruns in hydrocarbon megaprojects through the perspective of
chaos theory. The underlying principles of chaos theory and its
implications for cost overruns are examined and practical
recommendations proposed. In addition, directions for future research
in this fertile area provided.
Abstract: This paper presents a comparative analysis of
continuously stirred tank reactor (CSTR) control based on adaptive
control and optimal tuning of PID control based on particle swarm
optimization. In the design of adaptive control, Model reference
adaptive control (MRAC) scheme is used, in which the adaptation
law have been developed by MIT rule & Lyapunov’s rule. In PSO
control parameters of PID controller is tuned by using the concept of
particle swarm optimization to get optimized operating point for
minimum integral square error (ISE) condition. The results show the
adjustment of PID parameters converting into the optimal operating
point and the good control response can be obtained by the PSO
technique.
Abstract: In this article, we used the residual correction method
to deal with transient thermoelastic problems with a hollow spherical
region when the continuum medium possesses spherically isotropic
thermoelastic properties. Based on linear thermoelastic theory, the
equations of hyperbolic heat conduction and thermoelastic motion
were combined to establish the thermoelastic dynamic model with
consideration of the deformation acceleration effect and non-Fourier
effect under the condition of transient thermal shock. The approximate
solutions of temperature and displacement distributions are obtained
using the residual correction method based on the maximum principle
in combination with the finite difference method, making it easier and
faster to obtain upper and lower approximations of exact solutions.
The proposed method is found to be an effective numerical method
with satisfactory accuracy. Moreover, the result shows that the effect
of transient thermal shock induced by deformation acceleration is
enhanced by non-Fourier heat conduction with increased peak stress.
The influence on the stress increases with the thermal relaxation time.
Abstract: A clay soil classified as A-7-6 and CH soil according
to AASHTO and unified soil classification system respectively, was
stabilized using A-3 soil (AASHTO soil classification system). The
clay soil was replaced with 0%, 10%, 20%, to 100% A-3 soil,
compacted at both British Standard Light (BSL) and British Standard
Heavy (BSH) compaction energy levels and using Unconfined
Compressive Strength (UCS) as evaluation criteria. The Maximum
Dry Density (MDD) of the treated soils at both the BSL and BSH
compaction energy levels showed increase from 0% to 40% A-3 soil
replacement after which the values reduced to 100% replacement.
The trend of the Optimum Moisture Content (OMC) with varied A-3
soil replacement was similar to that of MDD but in a reversed order.
The OMC reduced from 0% to 40% A-3 soil replacement after which
the values increased to 100% replacement. This trend was attributed
to the observed reduction in void ratio from 0% to 40% replacement
after which the void ratio increased to 100% replacement. The
maximum UCS for the soil at varied A-3 soil replacement increased
from 272 and 770 kN/m2 for BSL and BSH compaction energy level
at 0% replacement to 295 and 795 kN/m2 for BSL and BSH
compaction energy level respectively at 10% replacement after which
the values reduced to 22 and 60 kN/m2 for BSL and BSH compaction
energy level respectively at 70% replacement. Beyond 70%
replacement, the mixtures could not be moulded for UCS test.
Abstract: Countryside has been generally recognized and
regarded as a characteristic symbol which presents in human memory
for a long time. As a result of the change of times, because of it is
failure to meet the growing needs of the growing life and mental
decline, the vast rural area began to decline. But their history feature
image which accumulated by the ancient tradition provides people
with the origins of existence on the spiritual level, such as "identity"
and "belonging", makes people closer to the others in the spiritual and
psychological aspects of a common experience about the past, thus the
sense of a lack of culture caused by the losing of memory symbols is
weakened. So, in the modernization process, how to repair its vitality
and transform and planning it in a sustainable way has become a hot
topics in architectural and urban planning. This paper aims to break
the constraints of disciplines, from the perspective of interdiscipline,
using the research methods of systems science to analyze and discuss
the theories and methods of rural form factors, which based on the
viewpoint of memory in psychology. So we can find a right way to
transform the Rural to give full play to the role of the countryside in
the actual use and the shape of history spirits.
Abstract: Graphene, a single-atom sheet, has been considered as
the most promising material for making future nanoelectromechanical
systems as well as purely electrical switching with graphene
transistors. Graphene-based devices have advantages in scaled-up
device fabrication due to the recent progress in large area graphene
growth and lithographic patterning of graphene nanostructures. Here
we investigated its mechanical responses of circular graphene
nanoflake under the nanoindentation using classical molecular
dynamics simulations. A correlation between the load and the
indentation depth was constructed. The nanoindented force in this
work was applied to the center point of the circular graphene nanoflake
and then, the resonance frequency could be tuned by a nanoindented
depth. We found the hardening or the softening of the graphene
nanoflake during its nanoindented-deflections, and such properties
were recognized by the shift of the resonance frequency. The
calculated mechanical parameters in the force-vs-deflection plot were
in good agreement with previous experimental and theoretical works.
This proposed schematics can detect the pressure via the deflection
change or/and the resonance frequency shift, and also have great
potential for versatile applications in nanoelectromechanical systems.
Abstract: Adoption of Information Systems (IS) is receiving
increasing attention such that its implications have been closely
monitored and studied by the IS management community, industry
and professional gatekeepers. Building on previous research
regarding the adoption of technology, this paper develops and
validates an integrated model of the adoption of mobile banking. The
model originates from the Technology Acceptance Model (TAM) and
the Theory of Planned Behaviour (TPB). This paper intends to offer a
preliminary scrutiny of the antecedents of the adoption of mobile
banking services in the context of a developing country. Data was
collected from Pakistan. The findings showed that an integrated TAM
and TPB model greatly explains the adoption intention of mobile
banking; and perceived behavioural control and its antecedents play a
significant role in predicting adoption Theoretical and managerial
implications of findings are presented and discussed.
Abstract: In a world characterized by greed and the lust for
power and its attendant trappings, abuse of legal power is nothing
new to most of us. Legal abuses of power abound in all fields of
human endeavour. Accounts of such abuses dominate the mass media
and for the average individual, no single day goes by without his
getting to hear about at least one such occurrence. This paper briefly
looks at the meaning of legal power, what legal abuse is all about, its
causes, and some of its manifestations in the society. Its
consequences will also be discussed and some suggestions for reform
will be made. In the course of the paper, references will be made to
various jurisdictions around the world.
Abstract: To study the dynamic mechanics response of asphalt
pavement under the temperature load and vehicle loading, asphalt
pavement was regarded as multilayered elastic half-space system, and
theory analysis was conducted by regarding dynamic modulus of
asphalt mixture as the parameter. Firstly, based on the dynamic
modulus test of asphalt mixture, function relationship between the
dynamic modulus of representative asphalt mixture and temperature
was obtained. In addition, the analytical solution for thermal stress in
single layer was derived by using Laplace integral transformation and
Hankel integral transformation respectively by using thermal
equations of equilibrium. The analytical solution of calculation model
of thermal stress in asphalt pavement was derived by transfer matrix
of thermal stress in multilayer elastic system. Finally, the variation of
thermal stress in pavement structure was analyzed. The result shows
that there is obvious difference between the thermal stress based on
dynamic modulus and the solution based on static modulus. So the
dynamic change of parameter in asphalt mixture should be taken into
consideration when theoretical analysis is taken out.
Abstract: An unrecorded experiment of use of the smartphone
as a tool for practical classes of histology is presented in this paper.
Behavior and learning of students of science courses at the University
were analyzed and compared as well as the mode of teaching of this
discipline and the appreciation of the students, using either digital
photographs taken by phone or drawings for record microscopic
observations, analyze and interpret histological sections of human or
animal tissues.
Abstract: The traditional rhythms of the West African country
of Guinea have played a centuries-long role in defining the different
people groups that make up the country. Throughout their history,
before and since colonization by the French, the different ethnicities
have used their traditional music as a distinct part of their historical
identities. That is starting to change. Guinea is an impoverished
nation created in the early twentieth-century with little regard for the
history and cultures of the people who were included. The traditional
rhythms of the different people groups and their heritages have
remained. Fifteen individual traditional Guinean rhythms were
chosen to represent popular rhythms from the four geographical
regions of Guinea. Each rhythm was traced back to its native village
and video recorded on-site by as many different local performing
groups as could be located. The cyclical patterns rhythms were
transcribed via a circular, spatial design and then copied into a box
notation system where sounds happening at the same time could be
studied. These rhythms were analyzed for their consistency-overperformance
in a Fundamental Rhythm Pattern analysis so rhythms
could be compared for how they are changing through different
performances. The analysis showed that the traditional rhythm
performances of the Middle and Forest Guinea regions were the most
cohesive and showed the least evidence of change between
performances. The role of music in each of these regions is both
limited and focused. The Coastal and High Guinea regions have
much in common historically through their ethnic history and
modern-day trade connections, but the rhythm performances seem to
be less consistent and demonstrate more changes in how they are
performed today. In each of these regions the role and usage of music
is much freer and wide-spread. In spite of advances being made as a
country, different ethnic groups still frequently only respond and
participate (dance and sing) to the music of their native ethnicity.
There is some evidence that this self-imposed musical barrier is
beginning to change and evolve, partially through the development of
better roads, more access to electricity and technology, the nationwide
Ebola health crisis, and a growing self-identification as a
unified nation.
Abstract: Digital cameras to reduce cost, use an image sensor to
capture color images. Color Filter Array (CFA) in digital cameras
permits only one of the three primary (red-green-blue) colors to be
sensed in a pixel and interpolates the two missing components
through a method named demosaicking. Captured data is interpolated
into a full color image and compressed in applications. Color
interpolation before compression leads to data redundancy. This
paper proposes a new Vector Quantization (VQ) technique to
construct a VQ codebook with Differential Evolution (DE)
Algorithm. The new technique is compared to conventional Linde-
Buzo-Gray (LBG) method.
Abstract: This contribution is focused on the methodology for
identifying levels of quality and improving quality through new
logistics model in railway transport. It is oriented on the application
of dynamic quality models, which represent an innovative method of
evaluation quality services. Through this conception, time factor,
expected, and perceived quality in each moment of the transportation
process within logistics chain can be taken into account. Various
models describe the improvement of the quality which emphases the
time factor throughout the whole transportation logistics chain.
Quality of services in railway transport can be determined by the
existing level of service quality, by detecting the causes of
dissatisfaction employees but also customers, to uncover strengths
and weaknesses. This new logistics model is able to recognize critical
processes in logistic chain. It includes service quality rating that must
respect its specific properties, which are unrepeatability,
impalpability, their use right at the time they are provided and
particularly changeability, which is significant factor in the
conditions of rail transport as well. These peculiarities influence the
quality of service regarding the constantly increasing requirements
and that result in new ways of finding progressive attitudes towards
the service quality rating.
Abstract: This article describes the results of research focused
on quality of railway freight transport services. Improvement of these
services has a crucial importance in customer considering on the
future use of railway transport. Processes filling the customer
demands and output quality assessment were defined as a part of the
research. In this contribution is introduced the map of quality
planning and the algorithm of applied methodology. It characterizes a
model which takes into account characters of transportation with
linking a perception services quality in ordinary and extraordinary
operation. Despite the fact that rail freight transport has its solid
position in the transport market, lots of carriers worldwide have been
experiencing a stagnation for a couple of years. Therefore, specific
results of the research have a significant importance and belong to
numerous initiatives aimed to develop and support railway transport
not only by creating a single railway area or reducing noise but also
by promoting railway services. This contribution is focused also on
the application of dynamic quality models which represent an
innovative method of evaluation quality services. Through this
conception, time factor, expected, and perceived quality in each
moment of the transportation process can be taken into account.
Abstract: The growth in the demand of electrical energy is
leading to load on the Power system which increases the occurrence
of frequent oscillations in the system. The reason for the oscillations
is due to the lack of damping torque which is required to dominate
the disturbances of Power system. By using FACT devices, such as
Unified Power Flow Controller (UPFC) can control power flow,
reduce sub-synchronous resonances and increase transient stability.
Hence, UPFC is used to damp the oscillations occurred in Power
system. This research focuses on adapting the neuro fuzzy controller
for the UPFC design by connecting the infinite bus (SMIB - Single
machine Infinite Bus) to a linearized model of synchronous machine
(Heffron-Phillips) in the power system. This model gains the
capability to improve the transient stability and to damp the
oscillations of the system.
Abstract: In this article, the radial displacement error correction
capability of a high precision spindle grinding caused by unbalance
force was investigated. The spindle shaft is considered as a flexible
rotor mounted on two sets of angular contact ball bearing. Finite
element methods (FEM) have been adopted for obtaining the
equation of motion of the spindle. In this paper, firstly, natural
frequencies, critical frequencies, and amplitude of the unbalance
response caused by residual unbalance are determined in order to
investigate the spindle behaviors. Furthermore, an optimization
design algorithm is employed to minimize radial displacement of the
spindle which considers dimension of the spindle shaft, the dynamic
characteristics of the bearings, critical frequencies and amplitude of
the unbalance response, and computes optimum spindle diameters
and stiffness and damping of the bearings. Numerical simulation
results show that by optimizing the spindle diameters, and stiffness
and damping in the bearings, radial displacement of the spindle can
be reduced. A spindle about 4 μm radial displacement error can be
compensated with 2 μm accuracy. This certainly can improve the
accuracy of the product of machining.
Abstract: CuO thin films were deposited by spray ultrasonic
pyrolysis with different precursor solution. Two staring solution slats
were used namely: copper acetate and copper chloride. The influence
of these solutions on CuO thin films proprieties of is instigated. The
X rays diffraction (XDR) analysis indicated that the films deposed
with copper acetate are amorphous however the films elaborated with
copper chloride have monoclinic structure. UV- Visible transmission
spectra showed a strong absorbance of the deposited CuO thin films
in the visible region. Electrical characterization has shown that CuO
thin films prepared with copper acetate have a higher electrical
conductivity.
Abstract: The subject of this paper is to review, comparative
analysis and simulation of selected components of power electronic
systems (PES), consistent with the concept of a more electric aircraft
(MEA). Comparative analysis and simulation in software
environment MATLAB / Simulink were carried out on the base of a
group of representatives of civil aircraft (B-787, A-380) and military
(F-22 Raptor, F-35) in the context of multi-pulse converters used in
them (6- and 12-pulse, and 18- and 24-pulse), which are key
components of high-tech electronics on-board power systems of
autonomous power systems (ASE) of modern aircraft (airplanes of
the future).