Abstract: This paper presents the findings of two experiments that were performed on the Redundancy in Wireless Connection Model (RiWC) using the 802.11b standard. The experiments were simulated using OPNET 11.5 Modeler software. The first was aimed at finding the maximum number of simultaneous Voice over Internet Protocol (VoIP) users the model would support under the G.711 and G.729 codec standards when the packetization interval was 10 milliseconds (ms). The second experiment examined the model?s VoIP user capacity using the G.729 codec standard along with background traffic using the same packetization interval as in the first experiment. To determine the capacity of the model under various experiments, we checked three metrics: jitter, delay and data loss. When background traffic was added, we checked the response time in addition to the previous three metrics. The findings of the first experiment indicated that the maximum number of simultaneous VoIP users the model was able to support was 5, which is consistent with recent research findings. When using the G.729 codec, the model was able to support up to 16 VoIP users; similar experiments in current literature have indicated a maximum of 7 users. The finding of the second experiment demonstrated that the maximum number of VoIP users the model was able to support was 12, with the existence of background traffic.
Abstract: A direct downconversion receiver implemented in 0.13 μm 1P8M process is presented. The circuit is formed by a single-end LNA, an active balun for conversion into balanced mode, a quadrature double-balanced passive switch mixer and a quadrature voltage-controlled oscillator. The receiver operates in the 2.4 GHz ISM band and complies with IEEE 802.15.4 (ZigBee) specifications. The circuit exhibits a very low noise figure of only 2.27 dB and dissipates only 14.6 mW with a 1.2 V supply voltage and is hence suitable for low-power applications.
Abstract: Wireless LAN (WLAN) access in public hotspot areas
becomes popular in the recent years. Since more and more multimedia
information is available in the Internet, there is an increasing demand
for accessing multimedia information through WLAN hotspots.
Currently, the bandwidth offered by an IEEE 802.11 WLAN cannot
afford many simultaneous real-time video accesses. A possible way to
increase the offered bandwidth in a hotspot is the use of multiple access
points (APs). However, a mobile station is usually connected to the
WLAN AP with the strongest received signal strength indicator (RSSI).
The total consumed bandwidth cannot be fairly allocated among those
APs. In this paper, we will propose an effective load-balancing scheme
via the support of the IAPP and SNMP in APs. The proposed scheme is
an open solution and doesn-t need any changes in both wireless stations
and APs. This makes load balancing possible in WLAN hotspots,
where a variety of heterogeneous mobile devices are employed.
Abstract: A portable sensor for the analysis of phosphate in
aqueous samples has been developed. The sensor incorporates
microfluidic technology, colorimetric detection, and wireless
communications into a compact and rugged portable device. The
detection method used is the molybdenum yellow method, in which a
phosphate-containing sample is mixed with a reagent containing
ammonium metavanadate and ammonium molybdate in an acidic
medium. A yellow-coloured compound is generated and the
absorption of this compound is measured using a light emitting diode
(LED) light source and a photodiode detector. The absorption is
directly proportional to the phosphate concentration in the original
sample. In this paper we describe the application of this phosphate
sensor to the analysis of wastewater at a municipal wastewater
treatment plant in Co. Kildare, Ireland.
Abstract: Due to the high increase in and demand for a wide assortment of applications that require low-cost, high-efficiency, and compact systems, RF power amplifiers are considered the most critical design blocks and power consuming components in wireless communication, TV transmission, radar, and RF heating. Therefore, much research has been carried out in order to improve the performance of power amplifiers. Classes-A, B, C, D, E and F are the main techniques for realizing power amplifiers.
An implementation of high efficiency class-F power amplifier with Gallium Nitride (GaN) High Electron Mobility Transistor (HEMT) was realized in this paper. The simulation and optimization of the class-F power amplifier circuit model was undertaken using Agilent’s Advanced Design system (ADS). The circuit was designed using lumped elements.
Abstract: This paper studies a vital issue in wireless
communications, which is the transmission of images over Wireless
Personal Area Networks (WPANs) through the Bluetooth network. It
presents a simple method to improve the efficiency of error control
code of old Bluetooth versions over mobile WPANs through
Interleaved Error Control Code (IECC) technique. The encoded
packets are interleaved by simple block interleaver. Also, the paper
presents a chaotic interleaving scheme as a tool against bursts of
errors which depends on the chaotic Baker map. Also, the paper
proposes using the chaotic interleaver instead of traditional block
interleaver with Forward Error Control (FEC) scheme. A comparison
study between the proposed and standard techniques for image
transmission over a correlated fading channel is presented.
Simulation results reveal the superiority of the proposed chaotic
interleaving scheme to other schemes. Also, the superiority of FEC
with proposed chaotic interleaver to the conventional interleavers
with enhancing the security level with chaotic interleaving packetby-
packet basis.
Abstract: This paper describes the performance of TCP Vegas
over the wireless IPv6 network. The performance of TCP Vegas is
evaluated using network simulator (ns-2). The simulation experiment
investigates how packet spacing affects the network delay, network
throughput and network efficiency of TCP Vegas. Moreover, we
investigate how the variable FTP packet sizes affect the network
performance. The result of the simulation experiment shows that as
the packet spacing is implements, the network delay is reduces,
network throughput and network efficiency is optimizes. As the FTP
packet sizes increase, the ratio of delay per throughput decreases.
From the result of experiment, we propose the appropriate packet size
in transmitting file transfer protocol application using TCP Vegas
with packet spacing enhancement over wireless IPv6 environment in
ns-2. Additionally, we suggest the appropriate ratio in determining
the appropriate RTT and buffer size in a network.
Abstract: Load managing method on road became necessary
since overloaded vehicles occur damage on road facilities and existing
systems for preventing this damage still show many
problems.Accordingly, efficient managing system for preventing
overloaded vehicles could be organized by using the road itself as a
scale by applying genetic algorithm to analyze the load and the drive
information of vehicles.Therefore, this paper organized Ubiquitous
sensor network system for development of intelligent overload vehicle
regulation system, also in this study, to use the behavior of road, the
transformation was measured by installing underground box type
indoor model and indoor experiment was held using genetic algorithm.
And we examined wireless possibility of overloaded vehicle
regulation system through experiment of the transmission and
reception distance.If this system will apply to road and bridge, might
be effective for economy and convenience through establishment of
U-IT system..
Abstract: This paper gives a study about forging solution to
deploy the fixed wireless access (FWA) in the band 3300-3400MHz
instead of 3400-3600MHz to eschew the harmful interference
between from the FWA towards fixed satellite services receiver
presented in this band. The impact of FWA services toward the FSS
and the boundaries of spectrum emission mask had been considered
to calculate the possible Guard band required in this case. In
addition, supplementary separation distance added to improve the
coexistence between the two adjacent bands. Simulation had been
done using Matlab software base on ITU models reliance on the most
popular specification used for the tropical weather countries. Review
the current problem of interference between two systems and some
mitigation techniques which adopted in Malaysia as a case study is a
part of this research.
Abstract: This paper explains the cause of nonlinearity in floor
attenuation hither to left unexplained. The performance degradation
occurring in air interface for GSM signals is quantitatively analysed
using the concept of Radiating Columns of buildings. The signal
levels were measured using Wireless Network Optimising Drive Test
Tool (E6474A of Agilent Technologies). The measurements were
taken in reflected signal environment under usual fading conditions
on actual GSM signals radiated from base stations. A mathematical
model is derived from the measurements to predict the GSM signal
levels in different floors. It was applied on three buildings and found
that the predicted signal levels deviated from the measured levels
with in +/- 2 dB for all floors. It is more accurate than the prediction
models based on Floor Attenuation Factor. It can be used for
planning proper indoor coverage in multi storey buildings.
Abstract: In this study, we introduced a communication system
where human body was used as medium through which data were
transferred. Multiple biosignal sensing units were attached to a subject
and wireless personal area network was formed. Data of the sensing
units were shared among them. We used wideband pulse
communication that was simple, low-power consuming and high data
rated. Each unit functioned as independent communication device or
node. A method of channel search and communication among the
modes was developed. A protocol of carrier sense multiple
access/collision detect was implemented in order to avoid data
collision or interferences. Biosignal sensing units should be located at
different locations due to the nature of biosignal origin. Our research
provided a flexibility of collecting data without using electrical wires.
More non-constrained measurement was accomplished which was
more suitable for u-Health monitoring.
Abstract: In order to monitor for traffic traversal, sensors can be
deployed to perform collaborative target detection. Such a sensor
network achieves a certain level of detection performance with the
associated costs of deployment and routing protocol. This paper
addresses these two points of sensor deployment and routing algorithm
in the situation where the absolute quantity of sensors or total energy
becomes insufficient. This discussion on the best deployment system
concluded that two kinds of deployments; Normal and Power law
distributions, show 6 and 3 times longer than Random distribution in
the duration of coverage, respectively. The other discussion on routing
algorithm to achieve good performance in each deployment system
was also addressed. This discussion concluded that, in place of the
traditional algorithm, a new algorithm can extend the time of coverage
duration by 4 times in a Normal distribution, and in the circumstance
where every deployed sensor operates as a binary model.
Abstract: With the widespread growth of applications of
Wireless Sensor Networks (WSNs), the need for reliable security
mechanisms these networks has increased manifold. Many security
solutions have been proposed in the domain of WSN so far. These
solutions are usually based on well-known cryptographic
algorithms.
In this paper, we have made an effort to survey well known
security issues in WSNs and study the behavior of WSN nodes that
perform public key cryptographic operations. We evaluate time
and power consumption of public key cryptography algorithm for
signature and key management by simulation.
Abstract: IETF RFC 2002 originally introduced the wireless
Mobile-IP protocol to support portable IP addresses for mobile
devices that often change their network access points to the Internet.
The inefficiency of this protocol mainly within the handoff
management produces large end-to-end packet delays, during
registration process, and further degrades the system efficiency due to
packet losses between subnets. The criterion to initiate a simple and
fast full-duplex connection between the home agent and foreign
agent, to reduce the roaming duration, is a very important issue to be
considered by a work in this paper. State-transition Petri-Nets of the
modeling scenario-based CIA: communication inter-agents procedure
as an extension to the basic Mobile-IP registration process was
designed and manipulated. The heuristic of configuration file during
practical Setup session for registration parameters, on Cisco platform
Router-1760 using IOS 12.3 (15)T is created. Finally, stand-alone
performance simulations results from Simulink Matlab, within each
subnet and also between subnets, are illustrated for reporting better
end-to-end packet delays. Results verified the effectiveness of our
Mathcad analytical manipulation and experimental implementation. It
showed lower values of end-to-end packet delay for Mobile-IP using
CIA procedure. Furthermore, it reported packets flow between
subnets to improve packet losses between subnets.
Abstract: Terminal localization for indoor Wireless Local Area
Networks (WLANs) is critical for the deployment of location-aware
computing inside of buildings. A major challenge is obtaining high
localization accuracy in presence of fluctuations of the received signal
strength (RSS) measurements caused by multipath fading. This paper
focuses on reducing the effect of the distance-varying noise by spatial
filtering of the measured RSS. Two different survey point geometries
are tested with the noise reduction technique: survey points arranged
in sets of clusters and survey points uniformly distributed over the
network area. The results show that the location accuracy improves
by 16% when the filter is used and by 18% when the filter is applied
to a clustered survey set as opposed to a straight-line survey set.
The estimated locations are within 2 m of the true location, which
indicates that clustering the survey points provides better localization
accuracy due to superior noise removal.
Abstract: Wireless mobile communications have experienced
the phenomenal growth through last decades. The advances in
wireless mobile technologies have brought about a demand for high
quality multimedia applications and services. For such applications
and services to work, signaling protocol is required for establishing,
maintaining and tearing down multimedia sessions. The Session
Initiation Protocol (SIP) is an application layer signaling protocols,
based on request/response transaction model. This paper considers
SIP INVITE transaction over an unreliable medium, since it has been
recently modified in Request for Comments (RFC) 6026. In order to
help in assuring that the functional correctness of this modification is
achieved, the SIP INVITE transaction is modeled and analyzed using
Colored Petri Nets (CPNs). Based on the model analysis, it is
concluded that the SIP INVITE transaction is free of livelocks and
dead codes, and in the same time it has both desirable and
undesirable deadlocks. Therefore, SIP INVITE transaction should be
subjected for additional updates in order to eliminate undesirable
deadlocks. In order to reduce the cost of implementation and
maintenance of SIP, additional remodeling of the SIP INVITE
transaction is recommended.
Abstract: A wireless sensor network with a large number of tiny sensor nodes can be used as an effective tool for gathering data in various situations. One of the major issues in wireless sensor networks is developing an energy-efficient routing protocol which has a significant impact on the overall lifetime of the sensor network. In this paper, we propose a novel hierarchical with static clustering routing protocol called Energy-Efficient Protocol with Static Clustering (EEPSC). EEPSC, partitions the network into static clusters, eliminates the overhead of dynamic clustering and utilizes temporary-cluster-heads to distribute the energy load among high-power sensor nodes; thus extends network lifetime. We have conducted simulation-based evaluations to compare the performance of EEPSC against Low-Energy Adaptive Clustering Hierarchy (LEACH). Our experiment results show that EEPSC outperforms LEACH in terms of network lifetime and power consumption minimization.
Abstract: In real-time networks a large number of application programs are relying on video data and heterogeneous data transmission techniques. The aim of this research is presenting a method for end-to-end vouch quality service in surface applicationlayer for sending video data in comparison form in wireless heterogeneous networks. This method tries to improve the video sending over the wireless heterogeneous networks with used techniques in surface layer, link and application. The offered method is showing a considerable improvement in quality observing by user. In addition to this, other specifications such as shortage of data load that had require to resending and limited the relation period length to require time for second data sending, help to be used the offered method in the wireless devices that have a limited energy. The presented method and the achieved improvement is simulated and presented in the NS-2 software.
Abstract: Delay and Disruption Tolerant Networking is part of
the Inter Planetary Internet with primary application being Deep
Space Networks. Its Terrestrial form has interesting research
applications such as Alagappa University Delay Tolerant Water
Monitoring Network which doubles as test beds for improvising its
routing scheme. DTNs depend on node mobility to deliver packets
using a store-carry-and forward paradigm. Throwboxes are small and
inexpensive stationary devices equipped with wireless interfaces and
storage. We propose the use of Throwboxes to enhance the contact
opportunities of the nodes and hence improve the Throughput. The
enhancement is evaluated using Alunivdtnsim, a desktop simulator in
C language and the results are graphically presented.
Abstract: In a wireless communication system, a
predistorter(PD) is often employed to alleviate nonlinear distortions
due to operating a power amplifier near saturation, thereby improving
the system performance and reducing the interference to adjacent
channels. This paper presents a new adaptive polynomial digital
predistorter(DPD). The proposed DPD uses Coordinate Rotation
Digital Computing(CORDIC) processors and PD process by pipelined
architecture. It is simpler and faster than conventional adaptive
polynomial DPD. The performance of the proposed DPD is proved by
MATLAB simulation.