Abstract: Most of the recent wireless LANs, broadband access networks, and digital broadcasting use Orthogonal Frequency Division Multiplexing techniques. In addition, the increasing demand of Data and Internet makes fiber optics an important technology, as fiber optics has many characteristics that make it the best solution for transferring huge frames of Data from a point to another. Radio over fiber is the place where high quality RF is converted to optical signals over single mode fiber. Optimum values for the bias level and the switching voltage for Mach-Zehnder modulator are important for the performance of radio over fiber links. In this paper, we propose a method to optimize the two parameters simultaneously; the bias and the switching voltage point of the external modulator of a radio over fiber system considering RF gain. Simulation results show the optimum gain value under these two parameters.
Abstract: In IEEE 802.11 networks, it is well known that the
traditional time-domain contention often leads to low channel
utilization. The first frequency-domain contention scheme, the time to
frequency (T2F), has recently been proposed to improve the channel
utilization and has attracted a great deal of attention. In this paper, we
present the latest research progress on the weighed frequency-domain
contention. We compare the basic ideas, work principles of these
related schemes and point out their differences. This paper is very
useful for further study on frequency-domain contention.
Abstract: This paper proposes an APPLE scheme that aims at providing absolute and proportional throughput guarantees, and maximizing system throughput simultaneously for wireless LANs with homogeneous and heterogenous traffic. We formulate our objectives as an optimization problem, present its exact and approximate solutions, and prove the existence and uniqueness of the approximate solution. Simulations validate that APPLE scheme is accurate, and the approximate solution can well achieve the desired objectives already.
Abstract: IEEE 802.11a/b/g standards provide multiple
transmission rates, which can be changed dynamically according to the
channel condition. Cooperative communications were introduced to
improve the overall performance of wireless LANs with the help of
relay nodes with higher transmission rates. The cooperative
communications are based on the fact that the transmission is much
faster when sending data packets to a destination node through a relay
node with higher transmission rate, rather than sending data directly to
the destination node at low transmission rate. To apply the cooperative
communications in wireless LAN, several MAC protocols have been
proposed. Some of them can result in collisions among relay nodes in a
dense network. In order to solve this problem, we propose a new
protocol. Relay nodes are grouped based on their transmission rates.
And then, relay nodes only in the highest group try to get channel
access. Performance evaluation is conducted using simulation, and
shows that the proposed protocol significantly outperforms the
previous protocol in terms of throughput and collision probability.
Abstract: The demand of high quality services has fueled
dimensional research and development in wireless communications
and networking. As a result, different wireless technologies like
Wireless LAN, CDMA, GSM, UMTS, MANET, Bluetooth and
satellite networks etc. have emerged in the last two decades. Future
networks capable of carrying multimedia traffic need IP convergence,
portability, seamless roaming and scalability among the existing
networking technologies without changing the core part of the
existing communications networks. To fulfill these goals, the present
networking systems are required to work in cooperation to ensure
technological independence, seamless roaming, high security and
authentication, guaranteed Quality of Services (QoS). In this paper, a
conceptual framework for a cooperative network (CN) is proposed
for integration of heterogeneous existing networks to meet out the
requirements of the next generation wireless networks.
Abstract: It is well-known that in wireless local area networks,
authenticating nodes by their MAC addresses is not secure since it is
very easy for an attacker to learn one of the authorized addresses and
change his MAC address accordingly. In this paper, in order to
prevent MAC address spoofing attacks, we propose to use
dynamically changing MAC addresses and make each address usable
for only one session. The scheme we propose does not require any
change in 802.11 protocols and incurs only a small performance
overhead. One of the nice features of our new scheme is that no third
party can link different communication sessions of the same user by
monitoring MAC addresses therefore our scheme is preferable also
with respect to user privacy.
Abstract: A simple network model is developed in OPNET to
study the performance of the Wi-Fi protocol. The model is simulated
in OPNET and performance factors such as load, throughput and delay
are analysed from the model. Four applications such as oracle, http, ftp
and voice are applied over the Wireless LAN network to determine the
throughput. The voice application utilises a considerable amount of
bandwidth of up to 5Mbps, as a result the 802.11g standard of the
Wi-Fi protocol was chosen which can support a data rate of up to
54Mbps. Results indicate that when the load in the Wi-Fi network is
increased the queuing delay on the point-to-point links in the Wi-Fi
network significantly reduces until it is comparable to that of WiMAX.
In conclusion, the queuing delay of the Wi-Fi protocol for the network
model simulated was about 0.00001secs comparable to WiMAX
network values.
Abstract: Wireless LAN technologies have picked up
momentum in the recent years due to their ease of deployment, cost
and availability. The era of wireless LAN has also given rise to
unique applications like VOIP, IPTV and unified messaging.
However, these real-time applications are very sensitive to network
and handoff latencies. To successfully support these applications,
seamless roaming during the movement of mobile station has become
crucial. Nowadays, centralized architecture models support roaming
in WLANs. They have the ability to manage, control and
troubleshoot large scale WLAN deployments. This model is managed
by Control and Provision of Wireless Access Point protocol
(CAPWAP). This paper covers the CAPWAP architectural solution
along with its proposals that have emerged. Based on the literature
survey conducted in this paper, we found that the proposed
algorithms to reduce roaming latency in CAPWAP architecture do
not support seamless roaming. Additionally, they are not sufficient
during the initial period of the network. This paper also suggests
important design consideration for mobility support in future
centralized IEEE 802.11 networks.
Abstract: This paper represents an investigation on how exploiting multiple transmit antennas by OFDM based wireless LAN subscribers can mitigate physical layer error rate. Then by comparing the Wireless LANs that utilize spatial diversity techniques with the conventional ones it will reveal how PHY and TCP throughputs behaviors are ameliorated. In the next step it will assess the same issues based on a cellular context operation which is mainly introduced as an innovated solution that beside a multi cell operation scenario benefits spatio-temporal signaling schemes as well. Presented simulations will shed light on the improved performance of the wide range and high quality wireless LAN services provided by the proposed approach.
Abstract: This paper describes the design concepts and
implementation of a 5-Joint mechanical arm for a rescue robot named
CEO Mission II. The multi-joint arm is a five degree of freedom
mechanical arm with a four bar linkage, which can be stretched to
125 cm. long. It is controlled by a teleoperator via the user-friendly
control and monitoring GUI program. With Inverse Kinematics
principle, we developed the method to control the servo angles of all
arm joints to get the desired tip position. By clicking the determined
tip position or dragging the tip of the mechanical arm on the
computer screen to the desired target point, the robot will compute
and move its multi-joint arm to the pose as seen on the GUI screen.
The angles of each joint are calculated and sent to all joint servos
simultaneously in order to move the mechanical arm to the desired
pose at once. The operator can also use a joystick to control the
movement of this mechanical arm and the locomotion of the robot.
Many sensors are installed at the tip of this mechanical arm for
surveillance from the high level and getting the vital signs of victims
easier and faster in the urban search and rescue tasks. It works very
effectively and easy to control. This mechanical arm and its software
were developed as a part of the CEO Mission II Rescue Robot that
won the First Runner Up award and the Best Technique award from
the Thailand Rescue Robot Championship 2006. It is a low cost,
simple, but functioning 5-Jiont mechanical arm which is built from
scratch, and controlled via wireless LAN 802.11b/g. This 5-Jiont
mechanical arm hardware concept and its software can also be used
as the basic mechatronics to many real applications.
Abstract: Voice over Internet Protocol (VoIP) is a form of voice
communication that uses audio data to transmit voice signals to the
end user. VoIP is one of the most important technologies in the
World of communication. Around, 20 years of research on VoIP,
some problems of VoIP are still remaining. During the past decade
and with growing of wireless technologies, we have seen that many
papers turn their concentration from Wired-LAN to Wireless-LAN.
VoIP over Wireless LAN (WLAN) faces many challenges due to the
loose nature of wireless network. Issues like providing Quality of
Service (QoS) at a good level, dedicating capacity for calls and
having secure calls is more difficult rather than wired LAN.
Therefore VoIP over WLAN (VoWLAN) remains a challenging
research topic. In this paper we consolidate and address major
VoWLAN issues. This research is helpful for those researchers wants
to do research in Voice over IP technology over WLAN network.
Abstract: This paper describes WiPoD (Wireless Position
Detector) which is a pure software based location determination and
tracking (positioning) system. It uses empirical signal strength measurements from different wireless access points for mobile user
positioning. It is designed to determine the location of users having
802.11 enabled mobile devices in an 802.11 WLAN infrastructure
and track them in real time. WiPoD is the first main module in our
LBS (Location Based Services) framework. We tested K-Nearest
Neighbor and Triangulation algorithms to estimate the position of a
mobile user. We also give the analysis results of these algorithms for
real time operations. In this paper, we propose a supportable, i.e.
understandable, maintainable, scalable and portable wireless
positioning system architecture for an LBS framework. The WiPoD
software has a multithreaded structure and was designed and implemented with paying attention to supportability features and real-time constraints and using object oriented design principles. We also describe the real-time software design issues of a wireless positioning system which will be part of an LBS framework.
Abstract: There are many expand of Wi-Fi zones provided
mobile careers and usage of wireless access point at home as increase
of usage of wireless internet caused by the use of smart phone. This
paper shows wireless local area network status, security threats of
WLAN and functionality of major wireless access point in Korea. We
propose security countermeasures concerned with life cycle of access
point from manufacturing to installation, using and finally disposal.
There needed to releasing with configured secure at access point.
Because, it is most cost effective resolution than stage of installation or
other life cycle of access point.
Abstract: In Public Wireless LANs(PWLANs), user anonymity
is an essential issue. Recently, Juang et al. proposed an anonymous
authentication and key exchange protocol using smart cards in
PWLANs. They claimed that their proposed scheme provided identity
privacy, mutual authentication, and half-forward secrecy. In this paper,
we point out that Juang et al.'s protocol is vulnerable to the
stolen-verifier attack and does not satisfy user anonymity.
Abstract: Many corporations are seriously concerned about
security of networks and therefore, their network supervisors are still
reluctant to install WLANs. In this regards, the IEEE802.11i standard
was developed to address the security problems, even though the
mistrust of the wireless LAN technology is still existing. The thought
was that the best security solutions could be found in open standards
based technologies that can be delivered by Virtual Private
Networking (VPN) being used for long time without addressing any
security holes for the past few years. This work, addresses this issue
and presents a simulated wireless LAN of IEEE802.11g protocol, and
analyzes impact of integrating Virtual Private Network technology to
secure the flow of traffic between the client and the server within the
LAN, using OPNET WLAN utility. Two Wireless LAN scenarios
have been introduced and simulated. These are based on normal
extension to a wired network and VPN over extension to a wired
network. The results of the two scenarios are compared and indicate
the impact of improving performance, measured by response time
and load, of Virtual Private Network over wireless LAN.
Abstract: This paper presents a hybrid association control
scheme that can maintain load balancing among access points in the
wireless LANs and can satisfy the quality of service requirements of
the multimedia traffic applications. The proposed model is
mathematically described as a linear programming model. Simulation
study and analysis were conducted in order to demonstrate the
performance of the proposed hybrid load balancing and association
control scheme. Simulation results shows that the proposed scheme
outperforms the other schemes in term of the percentage of blocking
and the quality of the data transfer rate providing to the multimedia
and real-time applications.
Abstract: Partitions can play a significant role in minimising cochannel
interference of Wireless LANs by attenuating signals across
room boundaries. This could pave the way towards higher density
deployments in home and office environments through spatial
channel reuse. Yet, due to protocol limitations, the latest incantation
of IEEE 802.11 standard is still unable to take advantage of this fact:
Despite having clearly adequate Signal to Interference Ratio (SIR)
over co-channel neighbouring networks in other rooms, its goodput
falls significantly lower than its maximum in the absence of cochannel
interferers. In this paper, we describe how this situation can
be remedied via modest modifications to the standard.
Abstract: IEEE has recently incorporated CCMP protocol to provide robust security to IEEE 802.11 wireless LANs. It is found that CCMP has been designed with a weak nonce construction and transmission mechanism, which leads to the exposure of initial counter value. This weak construction of nonce renders the protocol vulnerable to attacks by intruders. This paper presents how the initial counter can be pre-computed by the intruder. This vulnerability of counter block value leads to pre-computation attack on the counter mode encryption of CCMP. The failure of the counter mode will result in the collapse of the whole security mechanism of 802.11 WLAN.
Abstract: This paper presents a design and prototype
implementation of new home automation system that uses WiFi
technology as a network infrastructure connecting its parts. The
proposed system consists of two main components; the first part is
the server (web server), which presents system core that manages,
controls, and monitors users- home. Users and system administrator
can locally (LAN) or remotely (internet) manage and control system
code. Second part is hardware interface module, which provides
appropriate interface to sensors and actuator of home automation
system. Unlike most of available home automation system in the
market the proposed system is scalable that one server can manage
many hardware interface modules as long as it exists on WiFi
network coverage. System supports a wide range of home
automation devices like power management components, and
security components. The proposed system is better from the
scalability and flexibility point of view than the commercially
available home automation systems.
Abstract: The IEEE 802.11e which is an enhanced version of the 802.11 WLAN standards incorporates the Quality of Service (QoS) which makes it a better choice for multimedia and real time applications. In this paper we study various aspects concerned with 802.11e standard. Further, the analysis results for this standard are compared with the legacy 802.11 standard. Simulation results show that IEEE 802.11e out performs legacy IEEE 802.11 in terms of quality of service due to its flow differentiated channel allocation and better queue management architecture. We also propose a method to improve the unfair allocation of bandwidth for downlink and uplink channels by varying the medium access priority level.