Abstract: The construction of a civil structure inside a urban
area inevitably modifies the outdoor microclimate at the building
site. Wind speed, wind direction, air pollution, driving rain, radiation
and daylight are some of the main physical aspects that are subjected
to the major changes. The quantitative amount of these modifications
depends on the shape, size and orientation of the building and on its
interaction with the surrounding environment.The flow field over a
flat roof model building has been numerically investigated in order to
determine two-dimensional CFD guidelines for the calculation of the
turbulent flow over a structure immersed in an atmospheric boundary
layer. To this purpose, a complete validation campaign has been
performed through a systematic comparison of numerical simulations
with wind tunnel experimental data.Several turbulence models and
spatial node distributions have been tested for five different vertical
positions, respectively from the upstream leading edge to the
downstream bottom edge of the analyzed model. Flow field
characteristics in the neighborhood of the building model have been
numerically investigated, allowing a quantification of the capabilities
of the CFD code to predict the flow separation and the extension of
the recirculation regions.The proposed calculations have allowed the
development of a preliminary procedure to be used as a guidance in
selecting the appropriate grid configuration and corresponding
turbulence model for the prediction of the flow field over a twodimensional
roof architecture dominated by flow separation.
Abstract: Currently, there are many local area industrial networks
that can give guaranteed bandwidth to synchronous traffic, particularly
providing CBR channels (Constant Bit Rate), which allow
improved bandwidth management. Some of such networks operate
over Ethernet, delivering channels with enough capacity, specially
with compressors, to integrate multimedia traffic in industrial monitoring
and image processing applications with many sources. In
these industrial environments where a low latency is an essential
requirement, JPEG is an adequate compressing technique but it
generates VBR traffic (Variable Bit Rate). Transmitting VBR traffic
in CBR channels is inefficient and current solutions to this problem
significantly increase the latency or further degrade the quality. In
this paper an R(q) model is used which allows on-line calculation of
the JPEG quantification factor. We obtained increased quality, a lower
requirement for the CBR channel with reduced number of discarded
frames along with better use of the channel bandwidth.
Abstract: In an era of knowledge explosion, the growth of data
increases rapidly day by day. Since data storage is a limited resource,
how to reduce the data space in the process becomes a challenge issue.
Data compression provides a good solution which can lower the
required space. Data mining has many useful applications in recent
years because it can help users discover interesting knowledge in large
databases. However, existing compression algorithms are not
appropriate for data mining. In [1, 2], two different approaches were
proposed to compress databases and then perform the data mining
process. However, they all lack the ability to decompress the data to
their original state and improve the data mining performance. In this
research a new approach called Mining Merged Transactions with the
Quantification Table (M2TQT) was proposed to solve these problems.
M2TQT uses the relationship of transactions to merge related
transactions and builds a quantification table to prune the candidate
itemsets which are impossible to become frequent in order to improve
the performance of mining association rules. The experiments show
that M2TQT performs better than existing approaches.
Abstract: This paper presents a mean for reducing the torque
variation during the revolution of a vertical-axis wind turbine
(VAWT) by increasing the blade number. For this purpose, twodimensional
CDF analysis have been performed on a straight-bladed
Darreius-type rotor. After describing the computational model, a
complete campaign of simulations based on full RANS unsteady
calculations is proposed for a three, four and five-bladed rotor
architecture characterized by a NACA 0025 airfoil. For each
proposed rotor configuration, flow field characteristics are
investigated at several values of tip speed ratio, allowing a
quantification of the influence of blade number on flow geometric
features and dynamic quantities, such as rotor torque and power.
Finally, torque and power curves are compared for the analyzed
architectures, achieving a quantification of the effect of blade number
on overall rotor performance.
Abstract: The flow field over a flat roof model building has been numerically investigated in order to determine threedimensional CFD guidelines for the calculation of the turbulent flow over a structure immersed in an atmospheric boundary layer. To this purpose, a complete validation campaign has been performed through a systematic comparison of numerical simulations with wind tunnel experimental data. Wind tunnel measurements and numerical predictions have been compared for five different vertical positions, respectively from the upstream leading edge to the downstream bottom edge of the analyzed model. Flow field characteristics in the neighborhood of the building model have been numerically investigated, allowing a quantification of the capabilities of the CFD code to predict the flow separation and the extension of the recirculation regions. The proposed calculations have allowed the development of a preliminary procedure to be used as guidance in selecting the appropriate grid configuration and corresponding turbulence model for the prediction of the flow field over a three-dimensional roof architecture dominated by flow separation.
Abstract: Organ motion, especially respiratory motion, is a technical challenge to radiation therapy planning and dosimetry. This motion induces displacements and deformation of the organ tissues within the irradiated region which need to be taken into account when simulating dose distribution during treatment. Finite element modeling (FEM) can provide a great insight into the mechanical behavior of the organs, since they are based on the biomechanical material properties, complex geometry of organs, and anatomical boundary conditions. In this paper we present an original approach that offers the possibility to combine image-based biomechanical models with particle transport simulations. We propose a new method to map material density information issued from CT images to deformable tetrahedral meshes. Based on the principle of mass conservation our method can correlate density variation of organ tissues with geometrical deformations during the different phases of the respiratory cycle. The first results are particularly encouraging, as local error quantification of density mapping on organ geometry and density variation with organ motion are performed to evaluate and validate our approach.
Abstract: Automated discovery of Rule is, due to its applicability, one of the most fundamental and important method in KDD. It has been an active research area in the recent past. Hierarchical representation allows us to easily manage the complexity of knowledge, to view the knowledge at different levels of details, and to focus our attention on the interesting aspects only. One of such efficient and easy to understand systems is Hierarchical Production rule (HPRs) system. A HPR, a standard production rule augmented with generality and specificity information, is of the following form: Decision If < condition> Generality Specificity . HPRs systems are capable of handling taxonomical structures inherent in the knowledge about the real world. This paper focuses on the issue of mining Quantified rules with crisp hierarchical structure using Genetic Programming (GP) approach to knowledge discovery. The post-processing scheme presented in this work uses Quantified production rules as initial individuals of GP and discovers hierarchical structure. In proposed approach rules are quantified by using Dempster Shafer theory. Suitable genetic operators are proposed for the suggested encoding. Based on the Subsumption Matrix(SM), an appropriate fitness function is suggested. Finally, Quantified Hierarchical Production Rules (HPRs) are generated from the discovered hierarchy, using Dempster Shafer theory. Experimental results are presented to demonstrate the performance of the proposed algorithm.
Abstract: The flow filed around a flatted-roof compound has
been investigated by means of 2D and 3D numerical simulations. A
constant wind velocity profile, based both on the maximum reference
wind speed in the building site (peak gust speed worked out for a 50-
year return period) and on the local roughness coefficient, has been
simulated in order to determine the wind-induced loads on top of the
roof. After determining the influence of the incoming wind directions
on the induced roof loads, a 2D analysis of the most severe load
condition has been performed, achieving a numerical quantification
of the expected wind-induced forces on the PV panels on top of the
roof.
Abstract: It is established that the instantaneous heart rate (HR) of healthy humans keeps on changing. Analysis of heart rate variability (HRV) has become a popular non invasive tool for assessing the activities of autonomic nervous system. Depressed HRV has been found in several disorders, like diabetes mellitus (DM) and coronary artery disease, characterised by autonomic nervous dysfunction. A new technique, which searches for pattern repeatability in a time series, is proposed specifically for the analysis of heart rate data. These set of indices, which are termed as pattern repeatability measure and pattern repeatability ratio are compared with approximate entropy and sample entropy. In our analysis, based on the method developed, it is observed that heart rate variability is significantly different for DM patients, particularly for patients with diabetic foot ulcer.
Abstract: Serial Analysis of Gene Expression is a powerful
quantification technique for generating cell or tissue gene expression
data. The profile of the gene expression of cell or tissue in several
different states is difficult for biologists to analyze because of the large
number of genes typically involved. However, feature selection in
machine learning can successfully reduce this problem. The method
allows reducing the features (genes) in specific SAGE data, and
determines only relevant genes. In this study, we used a genetic
algorithm to implement feature selection, and evaluate the
classification accuracy of the selected features with the K-nearest
neighbor method. In order to validate the proposed method, we used
two SAGE data sets for testing. The results of this study conclusively
prove that the number of features of the original SAGE data set can be
significantly reduced and higher classification accuracy can be
achieved.
Abstract: Mycotoxin (aflatoxins) contamination of peanuts is a
great concern for human health. A total of 72 samples of unripe,
roasted, and salty peanuts were collected randomly from Pothohar
plateau of Pakistan for the assessment of aflatoxin. Samples were
dried, ground and extracted by acetonitrile (84%). The filtered
extracts were cleaned up by MycoSep-226 and analyzed by high
performance liquid chromatography with flourescence detector.
Quantification limit of Aflatoxin was 1 μg/kg and 70% Recovery was
observed in spiked samples in the range 1–10 μg/kg. The screening
of mycotoxins indicated that aflatoxins were present in most of the
samples being detected in 82%, in concentrations from 14.25 μg/kg
to 98.80 μg/kg. Optimal conditions for mycotoxin production and
fungal growth are frequently found in the crop fields as well as in
store houses. Human exposure of such toxin can be controlled by
pointed out such awareness and implemented the regulations.
Abstract: The article deals with the classification of alternative water resources in terms of potential risks which is the prerequisite for incorporating these water resources to the emergency plans. The classification is based on the quantification of risks resulting from possible damage, disruption or total destruction of water resource caused by natural and anthropogenic hazards, assessment of water quality and availability, traffic accessibility of the assessed resource and finally its water yield. The aim is to achieve the development of an integrated rescue system, which will be capable of supplying the population with drinking water on the whole stricken territory during the states of emergency.
Abstract: Censored Production Rule is an extension of standard
production rule, which is concerned with problems of reasoning with
incomplete information, subject to resource constraints and problem
of reasoning efficiently with exceptions. A CPR has a form: IF A
(Condition) THEN B (Action) UNLESS C (Censor), Where C is the
exception condition. Fuzzy CPR are obtained by augmenting
ordinary fuzzy production rule “If X is A then Y is B with an
exception condition and are written in the form “If X is A then Y is B
Unless Z is C. Such rules are employed in situation in which the
fuzzy conditional statement “If X is A then Y is B" holds frequently
and the exception condition “Z is C" holds rarely. Thus “If X is A
then Y is B" part of the fuzzy CPR express important information
while the unless part acts only as a switch that changes the polarity of
“Y is B" to “Y is not B" when the assertion “Z is C" holds. The
proposed approach is an attempt to discover fuzzy censored
production rules from set of discovered fuzzy if then rules in the
form:
A(X)  B(Y) || C(Z).
Abstract: In this paper, we propose a robust disease detection
method, called adaptive orientation code matching (Adaptive OCM),
which is developed from a robust image registration algorithm:
orientation code matching (OCM), to achieve continuous and
site-specific detection of changes in plant disease. We use two-stage
framework for realizing our research purpose; in the first stage,
adaptive OCM was employed which could not only realize the
continuous and site-specific observation of disease development, but
also shows its excellent robustness for non-rigid plant object searching
in scene illumination, translation, small rotation and occlusion changes
and then in the second stage, a machine learning method of support
vector machine (SVM) based on a feature of two dimensional (2D)
xy-color histogram is further utilized for pixel-wise disease
classification and quantification. The indoor experiment results
demonstrate the feasibility and potential of our proposed algorithm,
which could be implemented in real field situation for better
observation of plant disease development.
Abstract: Some quality control tools use non metric subjective information coming from experts, who qualify the intensity of relations existing inside processes, but without quantifying them. In this paper we have developed a quality control analytic tool, measuring the impact or strength of the relationship between process operations and product characteristics. The tool includes two models: a qualitative model, allowing relationships description and analysis; and a formal quantitative model, by means of which relationship quantification is achieved. In the first one, concepts from the Graphs Theory were applied to identify those process elements which can be sources of variation, that is, those quality characteristics or operations that have some sort of prelacy over the others and that should become control items. Also the most dependent elements can be identified, that is those elements receiving the effects of elements identified as variation sources. If controls are focused in those dependent elements, efficiency of control is compromised by the fact that we are controlling effects, not causes. The second model applied adapts the multivariate statistical technique of Covariance Structural Analysis. This approach allowed us to quantify the relationships. The computer package LISREL was used to obtain statistics and to validate the model.
Abstract: The flow field over a three dimensional pole barn
characterized by a cylindrical roof has been numerically investigated.
Wind pressure and viscous loads acting on the agricultural building
have been analyzed for several incoming wind directions, so as to
evaluate the most critical load condition on the structure. A constant
wind velocity profile, based on the maximum reference wind speed in
the building site (peak gust speed worked out for 50 years return
period) and on the local roughness coefficient, has been simulated.
In order to contemplate also the hazard due to potential air
wedging between the stored hay and the lower part of the ceiling, the
effect of a partial filling of the barn has been investigated.
The distribution of wind-induced loads on the structure have been
determined, allowing a numerical quantification of the effect of wind
direction on the induced stresses acting on a hemicylindrical roof.
Abstract: This work relates the development of an optical fiber
(OF) sensor for the detection and quantification of single walled
carbon nanotubes in aqueous solutions. The developed OF displays a
compact design, it requires less expensive materials and equipment
as well as low volume of sample (0.2 mL). This methodology was
also validated by the comparison of its analytical performance with
that of a standard methodology based on ultraviolet-visible
spectroscopy. The developed OF sensor follows the general SDS
calibration proposed for OF sensors as a more suitable calibration
fitting compared with classical calibrations.
Abstract: In the last few years, the Semantic Web gained scientific acceptance as a means of relationships identification in knowledge base, widely known by semantic association. Query about complex relationships between entities is a strong requirement for many applications in analytical domains. In bioinformatics for example, it is critical to extract exchanges between proteins. Currently, the widely known result of such queries is to provide paths between connected entities from data graph. However, they do not always give good results while facing the user need by the best association or a set of limited best association, because they only consider all existing paths but ignore the path evaluation. In this paper, we present an approach for supporting association discovery queries. Our proposal includes (i) a query language PmSPRQL which provides a multiparadigm query expressions for association extraction and (ii) some quantification measures making easy the process of association ranking. The originality of our proposal is demonstrated by a performance evaluation of our approach on real world datasets.
Abstract: There is significant interest in achieving technology
innovation through new product development activities. It is
recognized, however, that traditional project management practices
focused only on performance, cost, and schedule attributes, can often
lead to risk mitigation strategies that limit new technology
innovation. In this paper, a new approach is proposed for formally
managing and quantifying technology innovation. This approach uses
a risk-based framework that simultaneously optimizes innovation
attributes along with traditional project management and system
engineering attributes. To demonstrate the efficacy of the new riskbased
approach, a comprehensive product development experiment
was conducted. This experiment simultaneously managed the
innovation risks and the product delivery risks through the proposed
risk-based framework. Quantitative metrics for technology
innovation were tracked and the experimental results indicate that the
risk-based approach can simultaneously achieve both project
deliverable and innovation objectives.
Abstract: Gene expression profiling is rapidly evolving into a
powerful technique for investigating tumor malignancies. The
researchers are overwhelmed with the microarray-based platforms
and methods that confer them the freedom to conduct large-scale
gene expression profiling measurements. Simultaneously,
investigations into cross-platform integration methods have started
gaining momentum due to their underlying potential to help
comprehend a myriad of broad biological issues in tumor diagnosis,
prognosis, and therapy. However, comparing results from different
platforms remains to be a challenging task as various inherent
technical differences exist between the microarray platforms. In this
paper, we explain a simple ratio-transformation method, which can
provide some common ground for cDNA and Affymetrix platform
towards cross-platform integration. The method is based on the
characteristic data attributes of Affymetrix- and cDNA- platform. In
the work, we considered seven childhood leukemia patients and their
gene expression levels in either platform. With a dataset of 822
differentially expressed genes from both these platforms, we carried
out a specific ratio-treatment to Affymetrix data, which subsequently
showed an improvement in the relationship with the cDNA data.