Abstract: Mixed-traffic (e.g., pedestrians, bicycles, and vehicles)
data at an intersection is one of the essential factors for intersection
design and traffic control. However, some data such as pedestrian
volume cannot be directly collected by common detectors (e.g.
inductive loop, sonar and microwave sensors). In this paper, a video
based detection algorithm is proposed for mixed-traffic data collection
at intersections using surveillance cameras. The algorithm is derived
from Gaussian Mixture Model (GMM), and uses a mergence time
adjustment scheme to improve the traditional algorithm. Real-world
video data were selected to test the algorithm. The results show that
the proposed algorithm has the faster processing speed and more
accuracy than the traditional algorithm. This indicates that the
improved algorithm can be applied to detect mixed-traffic at
signalized intersection, even when conflicts occur.
Abstract: The paper shows some ability to manage two-phase
flows arising from the use of unsteady effects. In one case, we
consider the condition of fragmentation of the interface between the
two components leads to the intensification of mixing. The problem
is solved when the temporal and linear scale are small for the
appearance of the developed mixing layer. Showing that exist such
conditions for unsteady flow velocity at the surface of the channel,
which will lead to the creation and fragmentation of vortices at Re
numbers of order unity. Also showing that the Re is not a criterion of
similarity for this type of flows, but we can introduce a criterion that
depends on both the Re, and the frequency splitting of the vortices. It
turned out that feature of this situation is that streamlines behave
stable, and if we analyze the behavior of the interface between the
components it satisfies all the properties of unstable flows. The other
problem we consider the behavior of solid impurities in the extensive
system of channels. Simulated unsteady periodic flow modeled
breaths. Consider the behavior of the particles along the trajectories.
It is shown that, depending on the mass and diameter of the particles,
they can be collected in a caustic on the channel walls, stop in a
certain place or fly back. Of interest is the distribution of particle
velocity in frequency. It turned out that by choosing a behavior of the
velocity field of the carrier gas can affect the trajectory of individual
particles including force them to fly back.
Abstract: Binder drainage test is widely used to set an upper
limit to the design binder content of porous asphalt. However, the
presence of high amount of fine particles in the drained binder may
affect the accuracy of the test result. This paper presents a study to
characterize the composition and particle size distribution of fine
particles accumulated in the drained binder. Fine aggregates and filler
in the drained binder were extracted using a suitable solvent. Then,
wet and dry sieve analysis was carried out to identify the actual
composition of the extracted fine aggregates and filler. From the
results, almost half of the drained binder consisted of fine aggregates
and this significantly affects the accuracy of the design binder content
of porous asphalt mix. This simple finding highlights the importance
of taking into account the presence of fine aggregates in the
calculation of drained binder.
Abstract: The objective of this research was to study the factors
related to the satisfaction of consumers who purchased a Toyota
SUV Fortuner. This paper was a survey data which collected 400
samples from 65 car dealerships. The survey was conducted mainly
in Bangkok, Thailand. The statistics utilized in this paper included
percentage, mean, standard deviation and Pearson Product-Moment.
The findings revealed that the majority of respondent were male with
an undergraduate degree, married and live together. The average
income of the respondents was between 20,001 - 30,000 baht. Most
of them worked for private companies. Most of them had a family
with the average of 4 members. The hypotheses testing revealed that
the factors of marketing mix in terms of product (ability, gas
mileage, and safety) were related to overall satisfaction at the
medium level. However, the findings also revealed that the factors of
marketing mix in terms of product (image), price, and promotion, and
service center were related to the overall satisfaction at the low level.
Abstract: Service innovations are central concerns in fast
changing environment. Due to the fitness in customer demands and
advances in information technologies (IT) in service management, an
expanded conceptualization of e-service innovation is required.
Specially, innovation practices have become increasingly more
challenging, driving managers to employ a different open innovation
model to maintain competitive advantages. At the same time, firms
need to interact with external and internal customers in innovative
environments, like the open innovation networks, to co-create values.
Based on these issues, an important conceptual framework of e-service
innovation is developed. This paper aims to examine the contributing
factors on e-service innovation and firm performance, including
financial and non-financial aspects. The study concludes by showing
how e-service innovation will play a significant role in growing the
overall values of the firm. The discussion and conclusion will lead to a
stronger understanding of e-service innovation and co-creating values
with customers within open innovation networks.
Abstract: The paper focuses on the area of context modeling with respect to the specification of context-aware systems supporting ubiquitous applications. The proposed approach, followed within the SIMPLICITY IST project, uses a high-level system ontology to derive context models for system components which consequently are mapped to the system's physical entities. For the definition of user and device-related context models in particular, the paper suggests a standard-based process consisting of an analysis phase using the Common Information Model (CIM) methodology followed by an implementation phase that defines 3GPP based components. The benefits of this approach are further depicted by preliminary examples of XML grammars defining profiles and components, component instances, coupled with descriptions of respective ubiquitous applications.
Abstract: This study examines age and sex patterns of
children-s disability in the Parila union of Rajshahi, Bangladesh. For
this we assumed that (1) prevalence of disability patterns and its
severity in the middle childhood are higher than in the infancy or
latter childhood in the Parila union of Rajshahi, (2) prevalence of
disability patterns and its severity among the boys compared to girls
are higher in the study area of Bangladesh. In order to examine the
assumptions 102 samples, including their mothers were selected
based on snowball process and the respondents were individually
interviewed with semi-structured questionnaire method. The results
of the study suggest that disability patterns and its severity among the
male children were two-fold higher than the female children. In
addition, these patterns of children-s disability and its severity in the
middle childhood were also higher than in the infancy or latter
childhood. Further study should conduct how socio-structural factors
influence age and sex patterns of children-s disability patterns and its
severity in Bangladesh.
Abstract: The recognition of human faces, especially those with
different orientations is a challenging and important problem in image
analysis and classification. This paper proposes an effective scheme
for rotation invariant face recognition using Log-Polar Transform and
Discrete Cosine Transform combined features. The rotation invariant
feature extraction for a given face image involves applying the logpolar
transform to eliminate the rotation effect and to produce a row
shifted log-polar image. The discrete cosine transform is then applied
to eliminate the row shift effect and to generate the low-dimensional
feature vector. A PSO-based feature selection algorithm is utilized to
search the feature vector space for the optimal feature subset.
Evolution is driven by a fitness function defined in terms of
maximizing the between-class separation (scatter index).
Experimental results, based on the ORL face database using testing
data sets for images with different orientations; show that the
proposed system outperforms other face recognition methods. The
overall recognition rate for the rotated test images being 97%,
demonstrating that the extracted feature vector is an effective rotation
invariant feature set with minimal set of selected features.
Abstract: The performance of an image filtering system depends
on its ability to detect the presence of noisy pixels in the image. Most
of the impulse detection schemes assume the presence of salt and
pepper noise in the images and do not work satisfactorily in case of
uniformly distributed impulse noise. In this paper, a new algorithm is
presented to improve the performance of switching median filter in
detection of uniformly distributed impulse noise. The performance of
the proposed scheme is demonstrated by the results obtained from
computer simulations on various images.
Abstract: This study has been prepared with the purpose to get the views of senior class Elementary Education Mathematics preservice teachers on proving. Data have been obtained via surveys and interviews carried out with 104 preservice teachers. According to the findings, although preservice teachers have positive views about using proving in mathematics teaching, it is seen that their experiences related to proving is limited to courses and they think proving is a work done only for the exams. Furthermore, they have expressed in the interviews that proving is difficult for them, and because of this reason they prefer memorizing instead of learning.
Abstract: When binary decision diagrams are formed from
uniformly distributed Monte Carlo data for a large number of
variables, the complexity of the decision diagrams exhibits a
predictable relationship to the number of variables and minterms. In
the present work, a neural network model has been used to analyze the
pattern of shortest path length for larger number of Monte Carlo data
points. The neural model shows a strong descriptive power for the
ISCAS benchmark data with an RMS error of 0.102 for the shortest
path length complexity. Therefore, the model can be considered as a
method of predicting path length complexities; this is expected to lead
to minimum time complexity of very large-scale integrated circuitries
and related computer-aided design tools that use binary decision
diagrams.
Abstract: Understanding how airborne pathogens are
transported through hospital wards is essential for determining the
infection risk to patients and healthcare workers. This study utilizes
Computational Fluid Dynamics (CFD) simulations to explore
possible pathogen transport within a six-bed partitioned Nightingalestyle
hospital ward.
Grid independence of a ward model was addressed using the Grid
Convergence Index (GCI) from solutions obtained using three fullystructured
grids. Pathogens were simulated using source terms in
conjunction with a scalar transport equation and a RANS turbulence
model. Errors were found to be less than 4% in the calculation of air
velocities but an average of 13% was seen in the scalar field.
A parametric study of variations in the pathogen release point
illustrated that its distribution is strongly influenced by the local
velocity field and the degree of air mixing present.
Abstract: An investigation of noise in a micro stepping motor is
considered to study in this article. Because of the trend towards higher
precision and more and more small 3C (including Computer,
Communication and Consumer Electronics) products, the micro
stepping motor is frequently used to drive the micro system or the
other 3C products. Unfortunately, noise in a micro stepped motor is
too large to accept by the customs. To depress the noise of a micro
stepped motor, the dynamic characteristics in this system must be
studied. In this article, a Visual Basic (VB) computer program speed
controlled micro stepped motor in a digital camera is investigated.
Karman KD2300-2S non-contract eddy current displacement sensor,
probe microphone, and HP 35670A analyzer are employed to analyze
the dynamic characteristics of vibration and noise in a motor. The
vibration and noise measurement of different type of bearings and
different treatment of coils are compared. The rotating components,
bearings, coil, etc. of the motor play the important roles in producing
vibration and noise. It is found that the noise will be depressed about
3~4 dB and 6~7 dB, when substitutes the copper bearing with plastic
one and coats the motor coil with paraffin wax, respectively.
Abstract: The purposes of this study are 1) to study the frequent
English writing errors of students registering the course: Reading and
Writing English for Academic Purposes II, and 2) to find out the
results of writing error correction by using coded indirect corrective
feedback and writing error treatments. Samples include 28 2nd year
English Major students, Faculty of Education, Suan Sunandha
Rajabhat University. Tool for experimental study includes the lesson
plan of the course; Reading and Writing English for Academic
Purposes II, and tool for data collection includes 4 writing tests of
short texts. The research findings disclose that frequent English
writing errors found in this course comprise 7 types of grammatical
errors, namely Fragment sentence, Subject-verb agreement, Wrong
form of verb tense, Singular or plural noun endings, Run-ons
sentence, Wrong form of verb pattern and Lack of parallel structure.
Moreover, it is found that the results of writing error correction by
using coded indirect corrective feedback and error treatment reveal
the overall reduction of the frequent English writing errors and the
increase of students’ achievement in the writing of short texts with
the significance at .05.
Abstract: Modern retailers such as hypermarket/supermarket
need to be more customer-oriented in order to survive in today-s
competitive business world. As a result, the investigation of
determinant factors of store loyalty becomes important issue for
modern retailing players. This study suggests that consumers- store
loyalty in the modern retailing market (hypermarkets and
supermarkets) is influenced by environmental factors (such as store
image, store personnel). Using a model of stimulus-organismresponse
(S-O-R), this research examines S-R relationship of store
loyalty. S-O-R framework is derived from the existence literature and
tested empirically based on Indonesian consumers- experience. The
stimuli for this study are store image, store personnel, satisfaction
and culture factors. Affect, or the consumers- liking to modern
retailing stores, mediates the chosen environmental factors on
consumer-s store loyalty. The findings showed that store image, store
satisfaction and culture have significant positive relationship to store
loyalty via affect.
Abstract: The effect of moisture content and loading rate on
mechanical strength of 12 brown rice grain varieties was determined.
The results showed that the rupture force of brown rice grain
decreased by increasing the moisture content and loading rate. The
highest rupture force values was obtained at the moisture content of
8% (w.b.) and loading rate of 10 mm/min; while the lowest rupture
force corresponded to the moisture content of 14% (w.b.) and loading
rate of 15 mm/min. The 12 varieties were divided into three groups,
namely local short grain varieties, local long grain varieties and
improved long grain varieties. It was observed that the rupture
strength of the three groups were statistically different from each
other (P
Abstract: We attempted investigate a boat model, based on the
conversion of energy of surface wave into a sequence of
unidirectional pulses of jet spurts, in other words - model of the boat,
which is thrusting by the waves field on water surface. These pulses
are forming some average reactive stream from the output nozzle on
the stern of boat. The suggested model provides the conversion of its
oscillatory motions (both pitching and rolling) into a jet flow. This
becomes possible due to special construction of the boat and due to
several details, sensitive to the local wave field. The boat model
presents the uniflow jet engine without slow conversions of
mechanical energy into intermediate forms and without any external
sources of energy (besides surface waves). Motion of boat is
characterized by fast jerks and average onward velocity, which
exceeds the velocities of liquid particles in the wave.
Abstract: This paper discusses the causal explanation capability
of QRIOM, a tool aimed at supporting learning of organic chemistry
reactions. The development of the tool is based on the hybrid use of
Qualitative Reasoning (QR) technique and Qualitative Process
Theory (QPT) ontology. Our simulation combines symbolic,
qualitative description of relations with quantity analysis to generate
causal graphs. The pedagogy embedded in the simulator is to both
simulate and explain organic reactions. Qualitative reasoning through
a causal chain will be presented to explain the overall changes made
on the substrate; from initial substrate until the production of final
outputs. Several uses of the QPT modeling constructs in supporting
behavioral and causal explanation during run-time will also be
demonstrated. Explaining organic reactions through causal graph
trace can help improve the reasoning ability of learners in that their
conceptual understanding of the subject is nurtured.
Abstract: In illumination variant face recognition, existing
methods extracting face albedo as light normalized image may lead to
loss of extensive facial details, with light template discarded. To
improve that, a novel approach for realistic facial texture
reconstruction by combining original image and albedo image is
proposed. First, light subspaces of different identities are established
from the given reference face images; then by projecting the original
and albedo image into each light subspace respectively, texture
reference images with corresponding lighting are reconstructed and
two texture subspaces are formed. According to the projections in
texture subspaces, facial texture with normal light can be synthesized.
Due to the combination of original image, facial details can be
preserved with face albedo. In addition, image partition is applied to
improve the synthesization performance. Experiments on Yale B and
CMUPIE databases demonstrate that this algorithm outperforms the
others both in image representation and in face recognition.
Abstract: Structural representation and technology mapping of
a Boolean function is an important problem in the design of nonregenerative
digital logic circuits (also called combinational logic
circuits). Library aware function manipulation offers a solution to
this problem. Compact multi-level representation of binary networks,
based on simple circuit structures, such as AND-Inverter Graphs
(AIG) [1] [5], NAND Graphs, OR-Inverter Graphs (OIG), AND-OR
Graphs (AOG), AND-OR-Inverter Graphs (AOIG), AND-XORInverter
Graphs, Reduced Boolean Circuits [8] does exist in
literature. In this work, we discuss a novel and efficient graph
realization for combinational logic circuits, represented using a
NAND-NOR-Inverter Graph (NNIG), which is composed of only
two-input NAND (NAND2), NOR (NOR2) and inverter (INV) cells.
The networks are constructed on the basis of irredundant disjunctive
and conjunctive normal forms, after factoring, comprising terms with
minimum support. Construction of a NNIG for a non-regenerative
function in normal form would be straightforward, whereas for the
complementary phase, it would be developed by considering a virtual
instance of the function. However, the choice of best NNIG for a
given function would be based upon literal count, cell count and
DAG node count of the implementation at the technology
independent stage. In case of a tie, the final decision would be made
after extracting the physical design parameters.
We have considered AIG representation for reduced disjunctive
normal form and the best of OIG/AOG/AOIG for the minimized
conjunctive normal forms. This is necessitated due to the nature of
certain functions, such as Achilles- heel functions. NNIGs are found
to exhibit 3.97% lesser node count compared to AIGs and
OIG/AOG/AOIGs; consume 23.74% and 10.79% lesser library cells
than AIGs and OIG/AOG/AOIGs for the various samples considered.
We compare the power efficiency and delay improvement achieved
by optimal NNIGs over minimal AIGs and OIG/AOG/AOIGs for
various case studies. In comparison with functionally equivalent,
irredundant and compact AIGs, NNIGs report mean savings in power
and delay of 43.71% and 25.85% respectively, after technology
mapping with a 0.35 micron TSMC CMOS process. For a
comparison with OIG/AOG/AOIGs, NNIGs demonstrate average
savings in power and delay by 47.51% and 24.83%. With respect to
device count needed for implementation with static CMOS logic
style, NNIGs utilize 37.85% and 33.95% lesser transistors than their
AIG and OIG/AOG/AOIG counterparts.