Abstract: The author present PID controller design for
following control of hard disk drive by characteristic ratio assignment
method. The study in this paper concerns design of a PID controller
which sufficiently robust to the disturbances and plant perturbations
on following control of hard disk drive. Characteristic Ratio
Assignment (CRA) is shown to be an efficient control technique to
serve this requirement. The controller design by CRA is based on the
choice of the coefficients of the characteristic polynomial of the
closed loop system according to the convenient performance criteria
such as equivalent time constant and ration of characteristic
coefficient. Hence, in this study, CRA method is applied in PID
controller design for following control of hard disk drive. Matlab
simulation results shown that CRA design is fairly stable and robust
whilst giving the convenience in controller-s parameters adjustment.
Abstract: In literatures, many researches proposed various
methods to reduce PAPR (Peak to Average Power Ratio). Among
those, DSI (Dummy Sequence Insertion) is one of the most attractive
methods for WiMAX systems because it does not require side
information transmitted along with user data. However, the
conventional DSI methods find dummy sequence by performing an
iterative procedure until achieving PAPR under a desired threshold.
This causes a significant delay on finding dummy sequence and also
effects to the overall performances in WiMAX systems. In this paper,
the new method based on DSI is proposed by finding dummy
sequence without the need of iterative procedure. The fast DSI
method can reduce PAPR without either delays or required side
information. The simulation results confirm that the proposed method
is able to carry out PAPR performances as similar to the other
methods without any delays. In addition, the simulations of WiMAX
system with adaptive modulations are also investigated to realize the
use of proposed methods on various fading schemes. The results
suggest the WiMAX designers to modify a new Signal to Noise Ratio
(SNR) criteria for adaptation.
Abstract: The speculative locking (SL) protocol extends the twophase locking (2PL) protocol to allow for parallelism among conflicting transactions. The adaptive speculative locking (ASL) protocol provided further enhancements and outperformed SL protocols under most conditions. Neither of these protocols consider the impact of network latency on the performance of the distributed database systems. We have studied the performance of ASL protocol taking into account the communication overhead. The results indicate that though system load can counter network latency, it can still become a bottleneck in many situations. The impact of latency on performance depends on many factors including the system resources. A flexible discrete event simulator was used as the testbed for this study.
Abstract: In this paper we study a food chain model with three trophic levels and Michaelis-Menten type ratio-dependent functional response. Distinctive feature of this model is the sensitive dependence of the dynamical behavior on the initial populations and parameters of the real world. The stability of the equilibrium points are also investigated.
Abstract: In recent years, we see an increase of interest for efficient tracking systems in surveillance applications. Many of the proposed techniques are designed for static cameras environments. When the camera is moving, tracking moving objects become more difficult and many techniques fail to detect and track the desired targets. The problem becomes more complex when we want to track a specific object in real-time using a moving Pan and Tilt camera system to keep the target within the image. This type of tracking is of high importance in surveillance applications. When a target is detected at a certain zone, the possibility of automatically tracking it continuously and keeping it within the image until action is taken is very important for security personnel working in very sensitive sites. This work presents a real-time tracking system permitting the detection and continuous tracking of targets using a Pan and Tilt camera platform. A novel and efficient approach for dealing with occlusions is presented. Also a new intelligent forget factor is introduced in order to take into account target shape variations and avoid learning non desired objects. Tests conducted in outdoor operational scenarios show the efficiency and robustness of the proposed approach.
Abstract: Multimedia courseware has been accepted as a tool
that can support teaching and learning process. 'Li2D' courseware
was developed to assist student-s visualization on the topic of Loci in
Two Dimension. This paper describes an evaluation on the
effectiveness and usability of a 'Li2D' courseware. The quasi
experiment was used for the effectiveness evaluation. Usability
evaluation was accomplished based on four constructs of usability,
namely: efficiency, learnability, screen design and satisfaction. An
evaluation on the multimedia elements was also conducted. A total of
63 students of Form Two are involved in the study. The students are
divided into two groups: control and experimental. The experimental
group had to interact with 'Li2D' courseware as part of the learning
activities while the control group used the conventional learning
methods. The results indicate that the experimental group performed
better than the control group in understanding the Loci in Two
Dimensions topic. In terms of usability, the results showed that the
students agreed on the usability in multimedia elements in the 'Li2D'
courseware.
Abstract: With the drastically growth in optical communication
technology, a lossless, low-crosstalk and multifunction optical switch
is most desirable for large-scale photonic network. To realize such a
switch, we have introduced the new architecture of optical switch
that embedded many functions on single device. The asymmetrical
architecture of OXADM consists of 3 parts; selective port, add/drop
operation, and path routing. Selective port permits only the interest
wavelength pass through and acts as a filter. While add and drop
function can be implemented in second part of OXADM architecture.
The signals can then be re-routed to any output port or/and perform
an accumulation function which multiplex all signals onto single path
and then exit to any interest output port. This will be done by path
routing operation. The unique features offered by OXADM has
extended its application to Fiber to-the Home Technology (FTTH),
here the OXADM is used as a wavelength management element in
Optical Line Terminal (OLT). Each port is assigned specifically with
the operating wavelengths and with the dynamic routing management
to ensure no traffic combustion occurs in OLT.
Abstract: ERP systems are the largest software applications adopted by universities, along with quite significant investments in their implementation. However, unlike other applications little research has been conducted regarding these systems in a university environment. This paper aims at providing a critical review of previous research in ERP system in higher education with a special focus on higher education in Australia. The research not only forms the basis of an evaluation of previous research and research needs, it also makes inroads in identifying the payoff of ERPs in the sector from different perspectives with particular reference to the user. The paper is divided into two parts, the first part focuses on ERP literature in higher education at large, while the second focuses on ERP literature in higher education in Australia.
Abstract: The process for predicting the ballistic properties of a liquid rocket engine is based on the quantitative estimation of idealized performance deviations. In this aim, an equilibrium chemistry procedure is firstly developed and implemented in a Fortran routine. The thermodynamic formulation allows for the calculation of the theoretical performances of a rocket thrust chamber. In a second step, a computational fluid dynamic analysis of the turbulent reactive flow within the chamber is performed using a finite volume approach. The obtained values for the “quasi-real" performances account for both turbulent mixing and chemistryturbulence coupling. In the present work, emphasis is made on the combustion efficiency performance for which deviation is mainly due to radial gradients of static temperature and mixture ratio. Numerical values of the characteristic velocity are successfully compared with results from an industry-used code. The results are also confronted with the experimental data of a laboratory-scale rocket engine.
Abstract: In this paper we have proposed a novel dynamic least cost multicast routing protocol using hybrid genetic algorithm for IP networks. Our protocol finds the multicast tree with minimum cost subject to delay, degree, and bandwidth constraints. The proposed protocol has the following features: i. Heuristic local search function has been devised and embedded with normal genetic operation to increase the speed and to get the optimized tree, ii. It is efficient to handle the dynamic situation arises due to either change in the multicast group membership or node / link failure, iii. Two different crossover and mutation probabilities have been used for maintaining the diversity of solution and quick convergence. The simulation results have shown that our proposed protocol generates dynamic multicast tree with lower cost. Results have also shown that the proposed algorithm has better convergence rate, better dynamic request success rate and less execution time than other existing algorithms. Effects of degree and delay constraints have also been analyzed for the multicast tree interns of search success rate.
Abstract: This paper focuses on the quadratic stabilization problem for a class of uncertain impulsive switched systems. The uncertainty is assumed to be norm-bounded and enters both the state and the input matrices. Based on the Lyapunov methods, some results on robust stabilization and quadratic stabilization for the impulsive switched system are obtained. A stabilizing state feedback control law realizing the robust stabilization of the closed-loop system is constructed.
Abstract: A series of Ti based shape memory alloys with
composition of Ti50Ni49Cr1, Ti50Ni47Cr3 and Ti50Ni45Cr5 were
developed by vacuum arc-melting under a purified argon atmosphere.
The histometric and corrosion evaluation of Ti-Ni-Cr shape memory
alloys have been considered in this research work. The alloys were
developed by vacuum arc melting and implanted subcutaneously in
rabbits for 4, 8 and 12 weeks. Metallic implants were embedded in
order to determine the outcome of implantation on histometric and
corrosion evaluation of Ti-Ni-Cr metallic strips. Encapsulating
membrane formation around the alloys was minimal in the case of all
materials. After histomorphometric analyses it was possible to
demonstrate that there were no statistically significant differences
between the materials. Corrosion rate was also determined in this
study which is within acceptable range. The results showed the Ti-
Ni-Cr alloy was neither cytotoxic, nor have any systemic reaction on
living system in any of the test performed. Implantation shows good
compatibility and a potential of being used directly in vivo system.
Abstract: Martensitic stainless steels have been extensively used for their good corrosion resistance and better mechanical properties. Heat treatment was suggested as one of the most excellent ways to this regard; hence, it affects the microstructure, mechanical and corrosion properties of the steel. In the current research work the microstructural changes and corrosion behavior in an AISI 420A stainless steel exposed to temperatures in the 980-1035oC range were investigated. The heat treatment is carried out in vacuum furnace within the said temperature range. The quenching of the samples was carried out in oil, brine and water media. The formation and stability of passive film was studied by Open Circuit Potential, Potentiodynamic polarization and Electrochemical Scratch Tests. The Electrochemical Impedance Spectroscopy results simulated with Equivalent Electrical Circuit suggested bilayer structure of outer porous and inner barrier oxide films. The quantitative data showed thick inner barrier oxide film retarded electrochemical reactions. Micrographs of the quenched samples showed sigma and chromium carbide phases which prove the corrosion resistance of steel alloy.
Abstract: This paper is concerned with the permanence and extinction problem of enterprises cluster constituted by m satellite enterprises and a dominant enterprise. We present the model involving impulsive effect based on ecology theory, which effectively describe the competition and cooperation of enterprises cluster in real economic environment. Applying comparison theorem of impulsive differential equation, we establish sufficient conditions which ultimately affect the fate of enterprises: permanence, extinction, and co-existence. Finally, we present numerical examples to explain the economical significance of mathematical results.
Abstract: The aims of this paper are to study the efficacy of
chitosan nanoparticles in stimulating specific antibody against
A/H1N1 influenza antigen in mice. Chitosan nanoparticles (CSN)
were characterized by TEM. The results showed that the average size
of CSN was from 80nm to 106nm. The efficacy of A/H1N1 influenza
vaccine loaded on the surface of CSN showed that loading efficiency
of A/H1N1 influenza antigen on CSN was from 93.75 to 100%. Safe
property of the vaccine were tested. In 10 days post vaccination,
group of CSN 30 kDa and 300 kDa loaded A/H1N1 influenza antigen
were the rate of immune response on mice to be 100% (9/9) higher
than Al(OH)3 and other adjuvant. 100% mice in the experiment of all
groups had immune response in 20 days post vaccination. The results
also showed that HI titer of the group using CSN 300 kDa as an
adjuvant increased significantly up to 3971 HIU, over three-fold
higher than the Al(OH)3 adjuvant, chitosan (CS), and one hundredfold
than the A/H1N1 antigen only. Stability of the vaccine
formulation was investigated.
Abstract: At present, web Service is the first choice to reuse the
legacy system for the implementation of SOA. According to the status
of the implementation of SOA and the status of the legacy systems, we propose four encapsulating strategies. Base on the strategies, we
proposal the service-oriented encapsulating framework, the legacy system can be encapsulated by the service-oriented encapsulating
layer in three aspects, communication protocols, data and program.
The reuse rate of the legacy systems can be increased by using this framework
Abstract: This research investigates the factors that influence moral judgments when dealing with ethical dilemmas in the organizational context. It also investigates the antecedents of individual ethical ideology (idealism and relativism). A mixed method study, which combines qualitative (field study) and quantitative (survey) approaches, was used in this study. An initial model was developed first, which was then fine-tuned based on field studies. Data were collected from managers in Malaysian large organizations. The results of this study reveal that in-group collectivism culture, power distance culture, parental values, and religiosity were significant as antecedents of ethical ideology. However, direct effects of these variables on moral judgment were not significant. Furthermore, the results of this study confirm the significant effects of ethical ideology on moral judgment. This study provides valuable insight into evaluating the validity of existing theory as proposed in the literature and offers significant practical implications.
Abstract: Phase locked loops (PLL) and delay locked loops (DLL) play an important role in establishing coherent references (phase of carrier and symbol timing) in digital communication systems. Fully digital receiver including digital carrier synchronizer and symbol timing synchronizer fulfils the conditions for universal multi-mode communication receiver with option of symbol rate setting over several digit places and long-term stability of requirement parameters. Afterwards it is necessary to realize PLL and DLL in synchronizer in digital form and to approach to these subsystems as a discrete representation of analog template. Analysis of discrete phase locked loop (DPLL) or discrete delay locked loop (DDLL) and technique to determine their characteristics based on analog (continuous-time) template is performed in this posed paper. There are derived transmission response and error function for 1st order discrete locked loop and resulting equations and graphical representations for 2nd order one. It is shown that the spectrum translation due to sampling takes effect at frequency characteristics computing for specific values of loop parameters.
Abstract: In this study a two dimensional axisymmetric, steady state and incompressible laminar flow in a rotating single disk is numerically investigated. The finite volume method is used for solving the momentum equations. The numerical model and results
are validated by comparing it to previously reported experimental data for velocities, angles and moment coefficients. It is
demonstrated that increasing the axial distance increases the value of axial velocity and vice versa for tangential and total velocities. However, the maximum value of nondimensional radial velocity
occurs near the disk wall. It is also found that with increase rotational Reynolds number, moment coefficient decreases.
Abstract: In this work we develop an object extraction method
and propose efficient algorithms for object motion characterization.
The set of proposed tools serves as a basis for development of objectbased
functionalities for manipulation of video content. The
estimators by different algorithms are compared in terms of quality
and performance and tested on real video sequences. The proposed
method will be useful for the latest standards of encoding and
description of multimedia content – MPEG4 and MPEG7.