Abstract: Transesterified vegetable oils (biodiesel) are promising alternative fuel for diesel engines. Used vegetable oils are disposed from restaurants in large quantities. But higher viscosity restricts their direct use in diesel engines. In this study, used cooking oil was dehydrated and then transesterified using an alkaline catalyst. The combustion, performance and emission characteristics of Used Cooking oil Methyl Ester (UCME) and its blends with diesel oil are analysed in a direct injection C.I. engine. The fuel properties and the combustion characteristics of UCME are found to be similar to those of diesel. A minor decrease in thermal efficiency with significant improvement in reduction of particulates, carbon monoxide and unburnt hydrocarbons is observed compared to diesel. The use of transesterified used cooking oil and its blends as fuel for diesel engines will reduce dependence on fossil fuels and also decrease considerably the environmental pollution.
Abstract: In this paper, five options of Iran’s gas flare recovery
have been compared via MCDM method. For developing the model,
the weighing factor of each indicator an AHP method is used via the
Expert-choice software. Several cases were considered in this
analysis. They are defined where the priorities were defined always
keeping one criterion in first position, while the priorities of the other
criteria were defined by ordinal information defining the mutual
relations of the criteria and the respective indicators. The results,
show that amongst these cases, priority is obtained for CHP usage
where availability indicator is highly weighted while the pipeline
usage is obtained where environmental indicator highly weighted and
the injection priority is obtained where economic indicator is highly
weighted and also when the weighing factor of all the criteria are the
same the Injection priority is obtained.
Abstract: Multi-dimensional principal component analysis
(PCA) is the extension of the PCA, which is used widely as the
dimensionality reduction technique in multivariate data analysis, to
handle multi-dimensional data. To calculate the PCA the singular
value decomposition (SVD) is commonly employed by the reason of
its numerical stability. The multi-dimensional PCA can be calculated
by using the higher-order SVD (HOSVD), which is proposed by
Lathauwer et al., similarly with the case of ordinary PCA. In this
paper, we apply the multi-dimensional PCA to the multi-dimensional
medical data including the functional independence measure (FIM)
score, and describe the results of experimental analysis.
Abstract: The statistical process control (SPC) is one of the most powerful tools developed to assist ineffective control of quality, involves collecting, organizing and interpreting data during production. This article aims to show how the use of CEP industries can control and continuously improve product quality through monitoring of production that can detect deviations of parameters representing the process by reducing the amount of off-specification products and thus the costs of production. This study aimed to conduct a technological forecasting in order to characterize the research being done related to the CEP. The survey was conducted in the databases Spacenet, WIPO and the National Institute of Industrial Property (INPI). Among the largest are the United States depositors and deposits via PCT, the classification section that was presented in greater abundance to F.
Abstract: The issue of scientific – technological parks has been
proposed in several countries of the world especially in western
countries since a few decades ago and its efficiency is under
examination. In our county Iran, some scientific – technological
parks have been established or are being established. This design
would evaluate the urban role and method of architecture of these
parks in order to criticize its efficiency and offer some suggestions,
as much as possible to improve its building methods in Iran. The
main problem of this design is that how much these parks in Iran do
meet the international measurements. So for this reason, one
scientific park in Iran and one from western countries would be
studied and compared with each other.
Abstract: In this paper, we propose a novel frequency offset
estimation scheme for orthogonal frequency division multiplexing
(OFDM) systems. By correlating the OFDM signals within the coherence
phase bandwidth and employing a threshold in the frequency
offset estimation process, the proposed scheme is not only robust to
the timing offset but also has a reduced complexity compared with
that of the conventional scheme. Moreover, a timing offset estimation
scheme is also proposed as the next stage of the proposed frequency
offset estimation. Numerical results show that the proposed scheme
can estimate frequency offset with lower computational complexity
and does not require additional memory while maintaining the same
level of estimation performance.
Abstract: One of the essential requirements of a realistic
surgical simulator is to reproduce haptic sensations due to the
interactions in the virtual environment. However, the interaction need
to be performed in real-time, since a delay between the user action
and the system reaction reduces the immersion sensation. In this
paper, a prototype of a coronary stent implant simulator is present;
this system allows real-time interactions with an artery by means of a
specific haptic device. To improve the realism of the simulation, the
building of the virtual environment is based on real patients- images
and a Web Portal is used to search in the geographically remote
medical centres a virtual environment with specific features in terms
of pathology or anatomy. The functional architecture of the system
defines several Medical Centres in which virtual environments built
from the real patients- images and related metadata with specific
features in terms of pathology or anatomy are stored. The searched
data are downloaded from the Medical Centre to the Training Centre
provided with a specific haptic device and with the software
necessary both to manage the interaction in the virtual environment.
After the integration of the virtual environment in the simulation
system it is possible to perform training on the specific surgical
procedure.
Abstract: The study of effect of laser scanning speed on
material efficiency in Ti6Al4V application is very important because unspent powder is not reusable because of high temperature oxygen
pick-up and contamination. This study carried out an extensive study
on the effect of scanning speed on material efficiency by varying the
speed between 0.01 to 0.1m/sec. The samples are wire brushed and
cleaned with acetone after each deposition to remove un-melted
particles from the surface of the deposit. The substrate is weighed before and after deposition. A formula was developed to calculate the
material efficiency and the scanning speed was compared with the
powder efficiency obtained. The results are presented and discussed.
The study revealed that the optimum scanning speed exists for this study at 0.01m/sec, above and below which the powder efficiency
will drop
Abstract: This work represents the first review paper to explore the relationship between perfectionistic personality and borderline personality organization. The developmental origins, identity diffusion, interpersonal difficulties, and defense mechanisms that are common to both borderline personality and the interpersonal components of perfectionism are explored, and existing research on perfectionism and borderline personality is reviewed. The importance of the link between perfectionism and borderline features is discussed in terms of its contribution to the conceptual understanding of personality pathology as well as to applied clinical practices.
Abstract: In the last two decades radiofrequency ablation (RFA)
has been considered a promising medical procedure for the treatment
of primary and secondary malignancies. However, the needle-based
electrodes so far developed for this kind of treatment are not suitable
for the thermal ablation of tumors located in hollow organs like
esophagus, colon or bile duct. In this work a tubular electrode
solution is presented. Numerical and experimental analyses were
performed to characterize the volume of the lesion induced. Results
show that this kind of electrode is a feasible solution and numerical
simulation might provide a tool for planning RFA procedure with
some accuracy.
Abstract: Coronary artery bypass grafts (CABG) are widely
studied with respect to hemodynamic conditions which play
important role in presence of a restenosis. However, papers which
concern with constitutive modeling of CABG are lacking in the
literature. The purpose of this study is to find a constitutive model for
CABG tissue. A sample of the CABG obtained within an autopsy
underwent an inflation–extension test. Displacements were
recoredered by CCD cameras and subsequently evaluated by digital
image correlation. Pressure – radius and axial force – elongation
data were used to fit material model. The tissue was modeled as onelayered
composite reinforced by two families of helical fibers. The
material is assumed to be locally orthotropic, nonlinear,
incompressible and hyperelastic. Material parameters are estimated
for two strain energy functions (SEF). The first is classical
exponential. The second SEF is logarithmic which allows
interpretation by means of limiting (finite) strain extensibility.
Presented material parameters are estimated by optimization based
on radial and axial equilibrium equation in a thick-walled tube. Both
material models fit experimental data successfully. The exponential
model fits significantly better relationship between axial force and
axial strain than logarithmic one.
Abstract: This work describes the aerodynamic characteristic for
aircraft wing model with and without bird feather like winglet. The
aerofoil used to construct the whole structure is NACA 653-218
Rectangular wing and this aerofoil has been used to compare the
result with previous research using winglet. The model of the
rectangular wing with bird feather like winglet has been fabricated
using polystyrene before design using CATIA P3 V5R13 software
and finally fabricated in wood. The experimental analysis for the
aerodynamic characteristic for rectangular wing without winglet,
wing with horizontal winglet and wing with 60 degree inclination
winglet for Reynolds number 1.66×105, 2.08×105 and 2.50×105 have
been carried out in open loop low speed wind tunnel at the
Aerodynamics laboratory in Universiti Putra Malaysia. The
experimental result shows 25-30 % reduction in drag coefficient and
10-20 % increase in lift coefficient by using bird feather like winglet
for angle of attack of 8 degree.
Abstract: In this paper, acoustic techniques are used to detect hidden insect infestations of date palm tress (Phoenix dactylifera L.). In particular, we use an acoustic instrument for early discovery of the presence of a destructive insect pest commonly known as the Red Date Palm Weevil (RDPW) and scientifically as Rhynchophorus ferrugineus (Olivier). This type of insect attacks date palm tress and causes irreversible damages at late stages. As a result, the infected trees must be destroyed. Therefore, early presence detection is a major part in controlling the spread and economic damage caused by this type of infestation. Furthermore monitoring and early detection of the disease can asses in taking appropriate measures such as isolating or treating the infected trees. The acoustic system is evaluated in terms of its ability for early discovery of hidden bests inside the tested tree. When signal acquisitions is completed for a number of date palms, a signal processing technique known as time-frequency analysis is evaluated in terms of providing an estimate that can be visually used to recognize the acoustic signature of the RDPW. The testing instrument was tested in the laboratory first then; it was used on suspected or infested tress in the field. The final results indicate that the acoustic monitoring approach along with signal processing techniques are very promising for the early detection of presence of the larva as well as the adult pest in the date palms.
Abstract: Modeling transfer phenomena in several chemical
engineering operations leads to the resolution of partial differential
equations systems. According to the complexity of the operations
mechanisms, the equations present a nonlinear form and analytical
solution became difficult, we have then to use numerical methods
which are based on approximations in order to transform a
differential system to an algebraic one.Finite element method is one
of numerical methods which can be used to obtain an accurate
solution in many complex cases of chemical engineering.The packed
columns find a large application like contactor for liquid-liquid
systems such solvent extraction. In the literature, the modeling of this
type of equipment received less attention in comparison with the
plate columns.A mathematical bidimensionnal model with radial and
axial dispersion, simulating packed tower extraction behavior was
developed and a partial differential equation was solved using the
finite element method by adopting the Galerkine model. We
developed a Mathcad program, which can be used for a similar
equations and concentration profiles are obtained along the column.
The influence of radial dispersion was prooved and it can-t be
neglected, the results were compared with experimental concentration
at the top of the column in the extraction system:
acetone/toluene/water.
Abstract: The purpose of this study was to understand the main
sources of copper (Cu) accumulation in target organs of tilapia
(Oreochromis mossambicus) and to investigate how the organism
mediate the process of Cu accumulation under prolonged conditions.
By measuring both dietary and waterborne Cu accumulation and total
concentrations in tilapia with biokinetic modeling approach, we were
able to clarify the biokinetic coping mechanisms for the long term Cu
accumulation. This study showed that water and food are both the
major source of Cu for the muscle and liver of tilapia. This implied
that control the Cu concentration in these two routes will be correlated
to the Cu bioavailability for tilapia. We found that exposure duration
and level of waterborne Cu drove the Cu accumulation in tilapia. The
ability for Cu biouptake and depuration in organs of tilapia were
actively mediated under prolonged exposure conditions. Generally,
the uptake rate, depuration rate and net bioaccumulation ability in all
selected organs decreased with the increasing level of waterborne Cu
and extension of exposure duration.Muscle tissues accounted for over
50%of the total accumulated Cu and played a key role in buffering the
Cu burden in the initial period of exposure, alternatively, the liver
acted a more important role in the storage of Cu with the extension of
exposures. We concluded that assumption of the constant biokinetic
rates could lead to incorrect predictions with overestimating the
long-term Cu accumulation in ecotoxicological risk assessments.
Abstract: Dust storms are one of the most costly and destructive
events in many desert regions. They can cause massive damages both
in natural environments and human lives. This paper is aimed at
presenting a preliminary study on dust storms, as a major natural
hazard in arid and semi-arid regions. As a case study, dust storm
events occurred in Zabol city located in Sistan Region of Iran was
analyzed to diagnose and predict dust storms. The identification and
prediction of dust storm events could have significant impacts on
damages reduction. Present models for this purpose are complicated
and not appropriate for many areas with poor-data environments. The
present study explores Gamma test for identifying inputs of ANNs
model, for dust storm prediction. Results indicate that more attempts
must be carried out concerning dust storms identification and
segregate between various dust storm types.
Abstract: In the recent works related with mixture discriminant
analysis (MDA), expectation and maximization (EM) algorithm is
used to estimate parameters of Gaussian mixtures. But, initial values
of EM algorithm affect the final parameters- estimates. Also, when
EM algorithm is applied two times, for the same data set, it can be
give different results for the estimate of parameters and this affect the
classification accuracy of MDA. Forthcoming this problem, we use
Self Organizing Mixture Network (SOMN) algorithm to estimate
parameters of Gaussians mixtures in MDA that SOMN is more robust
when random the initial values of the parameters are used [5]. We
show effectiveness of this method on popular simulated waveform
datasets and real glass data set.
Abstract: The study deals with the modelling of the gas flow during heliox therapy. A special model has been developed to study the effect of the helium upon the gas flow in the airways during the spontaneous breathing. Lower density of helium compared with air decreases the Reynolds number and it allows improving the flow during the spontaneous breathing. In the cases, where the flow becomes turbulent while the patient inspires air the flow is still laminar when the patient inspires heliox. The use of heliox decreases the work of breathing and improves ventilation. It allows in some cases to prevent the intubation of the patients.
Abstract: The more recent satellite projects/programs makes
extensive usage of real – time embedded systems. 16 bit processors
which meet the Mil-Std-1750 standard architecture have been used in
on-board systems. Most of the Space Applications have been written
in ADA. From a futuristic point of view, 32 bit/ 64 bit processors are
needed in the area of spacecraft computing and therefore an effort is
desirable in the study and survey of 64 bit architectures for space
applications. This will also result in significant technology
development in terms of VLSI and software tools for ADA (as the
legacy code is in ADA).
There are several basic requirements for a special processor for
this purpose. They include Radiation Hardened (RadHard) devices,
very low power dissipation, compatibility with existing operational
systems, scalable architectures for higher computational needs,
reliability, higher memory and I/O bandwidth, predictability, realtime
operating system and manufacturability of such processors.
Further on, these may include selection of FPGA devices, selection
of EDA tool chains, design flow, partitioning of the design, pin
count, performance evaluation, timing analysis etc.
This project deals with a brief study of 32 and 64 bit processors
readily available in the market and designing/ fabricating a 64 bit
RISC processor named RISC MicroProcessor with added
functionalities of an extended double precision floating point unit
and a 32 bit signal processing unit acting as co-processors. In this
paper, we emphasize the ease and importance of using Open Core
(OpenSparc T1 Verilog RTL) and Open “Source" EDA tools such as
Icarus to develop FPGA based prototypes quickly. Commercial tools
such as Xilinx ISE for Synthesis are also used when appropriate.
Abstract: In the present essay, a model of choice by actors is analysedby utilizing the theory of chaos to explain how change comes about. Then, by using ancient and modern sources of literature, the theory of the social contract is analysed as a historical phenomenon that first appeared during the period of Classical Greece. Then, based on the findings of this analysis, the practice of direct democracy and public choice in ancient Athens is analysed, through two historical cases: Eubulus and Lycurgus political program in the second half of the 4th century. The main finding of this research is that these policies can be interpreted as an implementation of a social contract, through which citizens were taking decisions based on rational choice according to economic considerations.