Abstract: This paper presents probabilistic horizontal seismic
hazard assessment of Naghan, Iran. It displays the probabilistic
estimate of Peak Ground Horizontal Acceleration (PGHA) for the
return period of 475, 950 and 2475 years. The output of the
probabilistic seismic hazard analysis is based on peak ground
acceleration (PGA), which is the most common criterion in designing
of buildings. A catalogue of seismic events that includes both
historical and instrumental events was developed and covers the
period from 840 to 2009. The seismic sources that affect the hazard
in Naghan were identified within the radius of 200 km and the
recurrence relationships of these sources were generated by Kijko
and Sellevoll. Finally Peak Ground Horizontal Acceleration (PGHA)
has been prepared to indicate the earthquake hazard of Naghan for
different hazard levels by using SEISRISK III software.
Abstract: The Detour matrix (DD) of a graph has for its ( i , j)
entry the length of the longest path between vertices i and j. The
DD-eigenvalues of a connected graph G are the eigenvalues for its
detour matrix, and they form the DD-spectrum of G. The DD-energy
EDD of the graph G is the sum of the absolute values of its DDeigenvalues.
Two connected graphs are said to be DD- equienergetic
if they have equal DD-energies. In this paper, the DD- spectra of a
variety of graphs and their DD-energies are calculated.
Abstract: This paper describes an experimental investigation of
the drying behavior and conditions of rosehip in a convective
cyclone-type dryer. Drying experiments were conducted at air inlet
temperatures of 50, 60 and 70 o C and air velocities of 0.5, 1 and 1.5
ms–1. The parametric values obtained from the experiments were
fitted to the Newton mathematical models. Consequently, the drying
model developed by Newton model showed good agreement with the
data obtained from the experiments. Concluding, it was obtained that;
(i) the temperature is the major effect on the drying process, (ii) air
velocity has low effect on the drying of rosehip, (iii) the C-vitamin is
observed to change according to the temperature, moisture, drying
time and flow types. The changing ratio is found to be in the range of
0.70-0.74.
Abstract: Nowadays, web-based technologies influence in
people-s daily life such as in education, business and others.
Therefore, many web developers are too eager to develop their web
applications with fully animation graphics and forgetting its
accessibility to its users. Their purpose is to make their web
applications look impressive. Thus, this paper would highlight on the
usability and accessibility of a voice recognition browser as a tool to
facilitate the visually impaired and blind learners in accessing virtual
learning environment. More specifically, the objectives of the study
are (i) to explore the challenges faced by the visually impaired
learners in accessing virtual learning environment (ii) to determine
the suitable guidelines for developing a voice recognition browser
that is accessible to the visually impaired. Furthermore, this study
was prepared based on an observation conducted with the Malaysian
visually impaired learners. Finally, the result of this study would
underline on the development of an accessible voice recognition
browser for the visually impaired.
Abstract: A new distance-adjusted approach is proposed in
which static square contours are defined around an estimated
symbol in a QAM constellation, which create regions that
correspond to fixed step sizes and weighting factors. As a
result, the equalizer tap adjustment consists of a linearly
weighted sum of adaptation criteria that is scaled by a variable
step size. This approach is the basis of two new algorithms: the
Variable step size Square Contour Algorithm (VSCA) and the
Variable step size Square Contour Decision-Directed
Algorithm (VSDA). The proposed schemes are compared with
existing blind equalization algorithms in the SCA family in
terms of convergence speed, constellation eye opening and
residual ISI suppression. Simulation results for 64-QAM
signaling over empirically derived microwave radio channels
confirm the efficacy of the proposed algorithms. An RTL
implementation of the blind adaptive equalizer based on the
proposed schemes is presented and the system is configured to
operate in VSCA error signal mode, for square QAM signals
up to 64-QAM.
Abstract: Fractional-order controller was proven to perform better than the integer-order controller. However, the absence of a pole at origin produced marginal error in fractional-order control system. This study demonstrated the enhancement of the fractionalorder PI over the integer-order PI in a steam temperature control. The fractional-order controller was cascaded with an error compensator comprised of a very small zero and a pole at origin to produce a zero steady-state error for the closed-loop system. Some modification on the error compensator was suggested for different order fractional integrator that can improve the overall phase margin.
Abstract: We propose a new fiber lens structure for large distance
measurement in which a polymer layer is added to a conventional
fiber lens. The proposed fiber lens can adjust the working distance by
properly choosing the refractive index and thickness of the polymer
layer. In our numerical analysis for the fiber lens radius of 120 μm,
the working distance of the proposed fiber lens is about 10 mm
which is about 30 times larger than conventional fiber lens.
Abstract: Based on the Lagrangian for the Gross –Pitaevskii
equation as derived by H. Sakaguchi and B.A Malomed [5] we have
derived a double well model for the nonlinear optical lattice. This
model explains the various features of nonlinear optical lattices.
Further, from this model we obtain and simulate the probability for
tunneling from one well to another which agrees with experimental
results [4].
Abstract: One of the most importance of intelligence in-car and
roadside systems is the cooperative vehicle-infrastructure system. In
Thailand, ITS technologies are rapidly growing and real-time vehicle
information is considerably needed for ITS applications; for example,
vehicle fleet tracking and control and road traffic monitoring
systems. This paper defines the communication protocols and
software design for middleware components of B-VIS (Burapha
Vehicle-Infrastructure System). The proposed B-VIS middleware architecture serves the needs of a distributed RFID sensor network and simplifies some intricate details of several communication standards.
Abstract: There has been gradual progress of late in construction projects, particularly in big-scale megaprojects. Due to the long-term construction period, however, with large-scale budget investment, lack of construction management technologies, and increase in the incomplete elements of project schedule management, a plan to conduct efficient operations and to ensure business safety is required. In particular, as the project management information system (PMIS) is meant for managing a single project centering on the construction phase, there is a limitation in the management of program-scale businesses like megaprojects. Thus, a program management information system (PgMIS) that includes program-level management technologies is needed to manage multiple projects. In this study, a support tool was developed for managing the cost and schedule information occurring in the construction phase, at the program level. In addition, a case study on the developed support tool was conducted to verify the usability of the system. With the use of the developed support tool program, construction managers can monitor the progress of the entire project and of the individual subprojects in real time.
Abstract: In this paper, we propose a novel approach for image
segmentation via fuzzification of Rènyi Entropy of Generalized
Distributions (REGD). The fuzzy REGD is used to precisely measure
the structural information of image and to locate the optimal
threshold desired by segmentation. The proposed approach draws
upon the postulation that the optimal threshold concurs with
maximum information content of the distribution. The contributions
in the paper are as follow: Initially, the fuzzy REGD as a measure of
the spatial structure of image is introduced. Then, we propose an
efficient entropic segmentation approach using fuzzy REGD.
However the proposed approach belongs to entropic segmentation
approaches (i.e. these approaches are commonly applied to grayscale
images), it is adapted to be viable for segmenting color images.
Lastly, diverse experiments on real images that show the superior
performance of the proposed method are carried out.
Abstract: South Africa is facing a crisis with not being able to produce enough graduates in the scarce skills areas to sustain economic growth. The crisis is fuelled by a school system that does not produce enough potential students with Mathematics, Accounting and Science. Since the introduction of the new school curriculum in 2008, there is no longer an option to take pure maths on a standard grade level. Instead, only two mathematical subjects are offered: pure maths (which is on par with higher grade maths) and mathematical literacy. It is compulsory to take one or the other. As a result, lees student finishes Grade 12 with pure mathematics every year. This national problem needs urgent attention if South Africa is to make any headway in critical skills development as mathematics is a gateway to scarce skills professions. Higher education institutions initiated several initiatives in an attempt to address the above, including preparatory courses, bridging programmes and extended curricula with foundation provisions. In view of the above, and government policy directives to broaden access in the scarce skills areas to increase student throughput, foundation provision was introduced for Commerce and Information Technology programmes at the Vaal Triangle Campus (VTC) of North-West University (NWU) in 2010. Students enrolling for extended programmes do not comply with the minimum prerequisites for the normal programmes. The question then arises as to whether these programmes have the intended impact? This paper reports the results of a two year longitudinal study, tracking the first year academic achievement of the two cohorts of enrolments since 2010. The results provide valuable insight into the structuring of an extended programme and its potential impact.
Abstract: Many supervised induction algorithms require discrete
data, even while real data often comes in a discrete
and continuous formats. Quality discretization of continuous
attributes is an important problem that has effects on speed,
accuracy and understandability of the induction models. Usually,
discretization and other types of statistical processes are applied
to subsets of the population as the entire population is practically
inaccessible. For this reason we argue that the discretization
performed on a sample of the population is only an estimate of
the entire population. Most of the existing discretization methods,
partition the attribute range into two or several intervals using
a single or a set of cut points. In this paper, we introduce a
technique by using resampling (such as bootstrap) to generate
a set of candidate discretization points and thus, improving the
discretization quality by providing a better estimation towards
the entire population. Thus, the goal of this paper is to observe
whether the resampling technique can lead to better discretization
points, which opens up a new paradigm to construction of
soft decision trees.
Abstract: The medical studies often require different methods
for parameters selection, as a second step of processing, after the
database-s designing and filling with information. One common
task is the selection of fields that act as risk factors using wellknown
methods, in order to find the most relevant risk factors and
to establish a possible hierarchy between them. Different methods
are available in this purpose, one of the most known being the
binary logistic regression. We will present the mathematical
principles of this method and a practical example of using it in the
analysis of the influence of 10 different psychiatric diagnostics
over 4 different types of offences (in a database made from 289
psychiatric patients involved in different types of offences).
Finally, we will make some observations about the relation
between the risk factors hierarchy established through binary
logistic regression and the individual risks, as well as the results of
Chi-squared test. We will show that the hierarchy built using the
binary logistic regression doesn-t agree with the direct order of risk
factors, even if it was naturally to assume this hypothesis as being
always true.
Abstract: A CFD software was employed to analyze the
characteristics of the flat round porous aerostatic bearings. The effects
of gap between the bearing and the guide way and the porosity of the
porous material on the load capacity of the bearing were studied. The
adequacy of the simulation model and the approach was verified. From
the parametric study, it is found that the depth of the flow path does not
influence the load capacity of the bearing; the load capacity of the
bearing will decrease if the thickness of the porous material increases
or the porous material protrudes above the bearing housing; the
variation of the chamfer at the edge of the bearing does not affect the
bearing load capacity. For a bearing with an air gap of 5μm and a
porosity of 0.1, the average load capacity and the pressure distribution
of the bearing are nearly unchanged no matter the bearing moves at a
constant or a varying speed.
Abstract: The aim of this study is to investigate the kinematics of undulatory elongated fish swimming against a velocity flow. We perform the experiments on European eel Anguilla Anguilla swimming in a hydrodynamic re-circulating tank with the velocity flow fixed at 0.2 m/s. We find that the undulating shape of overall eel body changes when it swims slantwise from the flow direction, by comparison to axial undulation shape. We examine this kinematics and we propose a general equation describing the lateral position of undulation body taking into account the direction of the eel-s swimming.
Abstract: The Chiu-s method which generates a Takagi-Sugeno Fuzzy Inference System (FIS) is a method of fuzzy rules extraction. The rules output is a linear function of inputs. In addition, these rules are not explicit for the expert. In this paper, we develop a method which generates Mamdani FIS, where the rules output is fuzzy. The method proceeds in two steps: first, it uses the subtractive clustering principle to estimate both the number of clusters and the initial locations of a cluster centers. Each obtained cluster corresponds to a Mamdani fuzzy rule. Then, it optimizes the fuzzy model parameters by applying a genetic algorithm. This method is illustrated on a traffic network management application. We suggest also a Mamdani fuzzy rules generation method, where the expert wants to classify the output variables in some fuzzy predefined classes.
Abstract: The purpose of this paper is to investigate the
durability of cement mortar in presence of Rice Husk Ash (RHA).
The strength and durability of mortar with different replacement
level (0%, 10%, 15%, 20%, 25% and 30%) of Ordinary Portland
Cement (OPC) by RHA is investigated here. RHA was
manufactured from an uncontrolled burning process. Test samples
were prepared with river sand of FM 2.73. Samples were kept in
controlled environment up to test time. The results show that
addition of RHA was shown better results for 20% replacement
level than OPC at 90 days. In durability test all samples passed for
20 cycles except 25% and 30% replacement level.
Abstract: In this work, an organic compound 5,10,15,20-
Tetrakis(3,5-di-tertbutylphenyl)porphyrinatocopper(II) (TDTBPPCu)
is studied as an active material for thin film electronic devices. To
investigate the electrical properties of TDTBPPCu, junction of
TDTBPPCu with heavily doped n-Si and Al is fabricated.
TDTBPPCu film was sandwiched between Al and n-Si electrodes.
Various electrical parameters of TDTBPPCu are determined. The
current-voltage characteristics of the junction are nonlinear,
asymmetric and show rectification behavior, which gives the clue of
formation of depletion region. This behavior indicates the potential
of TDTBPPCu for electronics applications. The current-voltage and
capacitance-voltage techniques are used to find the different
electronic parameters.
Abstract: This paper describes the two stage control using a disturbance observer and a Kalman filter. The system feedback uses the estimated state when it controls the speed. After the change-over point, its feedback uses the controlled plant output when it controls the position. To change the system continually, a change-over point has to be determined pertinently, and the controlled plant input has to be adjusted by the addition of the appropriate value. The proposed method has noise-reduction effect. It changes the system continually, even if the controlled plant identification has the error. Although the conventional method needs a speed sensor, the proposed method does not need it. The proposed method has a superior robustness compared with the conventional two stage control.