Abstract: This paper is concerned with an epidemic model with delay. By using the comparison theorem of the differential equation and constructing a suitable Lyapunov functional, Some sufficient conditions which guarantee the permeance and existence of a unique globally attractive positive almost periodic solution of the model are obtain. Finally, an example is employed to illustrate our result.
Abstract: The present study aimed to investigate whether
chlorophyll meter readings (SPAD) can be used as criterion of singleplant
selection in maize breeding. Experimentation was performed at
the ultra-low density of 0.74 plants/m2 in order the potential yield per
plant to be fully expressed. R-31 honeycomb experiments were
conducted in three different areas in Greece (Thessaloniki, Giannitsa
and Florina) using 30 inbred lines at well-watered and water-stressed
conditions during the 2012 growing season. The chlorophyll meter
readings had higher rates at dry conditions, except location of
Giannitsa where differences were not significant. Genotypes of
highest chlorophyll meter readings were consistent across areas,
emphasizing on the character’s stability. A positive correlation
between the chlorophyll meter readings and grain yield was
strengthening over time and culminated at the physiological maturity
stage. There was a clear sign that the chlorophyll meter readings has
the potential to be used for the selection of stress-adaptive genotypes
and may permit modern maize to be grown at wider range of
environments addressing the climate change scenarios.
Abstract: In this paper, determining the optimal proportionalintegral-
derivative (PID) controller gains of an single-area load
frequency control (LFC) system using genetic algorithm (GA) is
presented. The LFC is notoriously difficult to control optimally using
conventionally tuning a PID controller because the system parameters
are constantly changing. It is for this reason the GA as tuning strategy
was applied. The simulation has been conducted in MATLAB
Simulink package for single area power system. the simulation results
shows the effectiveness performance of under various disturbance.
Abstract: The purpose of our study was to compare spontaneous
re-epithelisation characteristics versus assisted re-epithelisation. In
order to assess re-epithelisation of the injured skin, we have imagined
and designed a burn wound model on Wistar rat skin. Our aim was to
create standardised, easy reproducible and quantifiable skin lesions
involving entire epidermis and superficial dermis. We then have
applied the above mentioned therapeutic strategies to compare
regeneration of epidermis and dermis, local and systemic parameter
changes in different conditions. We have enhanced the reepithelisation
process under a moist atmosphere of a polyurethane
wound dress modified with helium non-thermal plasma, and with the
aid of direct cold-plasma treatment respectively. We have followed
systemic parameters change: hematologic and biochemical
parameters, and local features: oxidative stress markers and histology
of skin in the above mentioned conditions. Re-epithelisation is just a
part of the skin regeneration process, which recruits cellular
components, with the aid of epidermal and dermal interaction via
signal molecules.
Abstract: A new nonlinear PID controller and its stability
analysis are presented in this paper. A nonlinear function is deduced
from the similarities between the control effort and the electric-field
effect of a capacitor. The conventional linear PID controller can be
modified into a nonlinear one by this function. To analyze the stability
of the nonlinear PID controlled system, an idea of energy equivalence
is adapted to avoid the conservativeness which is usually arisen from
some traditional theorems and Criterions. The energy equivalence is
naturally related with the conceptions of Passivity and T-Passivity. As
a result, an engineering guideline for the parameter design of the
nonlinear PID controller is obtained. An inverted pendulum system is
tested to verify the nonlinear PID control scheme.
Abstract: This work proposes an optical fiber system (OF) for
sensing various volatile organic compounds (VOCs) in human breath
for the diagnosis of some metabolic disorders as a non-invasive
methodology. The analyzed VOCs are alkanes (i.e., ethane, pentane,
heptane, octane, and decane), and aromatic compounds (i.e., benzene,
toluene, and styrene). The OF displays high analytical performance
since it provides near real-time responses, rapid analysis, and low
instrumentation costs, as well as it exhibits useful linear range and
detection limits; the developed OF sensor is also comparable to a
reference methodology (gas chromatography-mass spectrometry) for
the eight tested VOCs.
Abstract: One of the most importance of intelligence in-car and
roadside systems is the cooperative vehicle-infrastructure system. In
Thailand, ITS technologies are rapidly growing and real-time vehicle
information is considerably needed for ITS applications; for example,
vehicle fleet tracking and control and road traffic monitoring
systems. This paper defines the communication protocols and
software design for middleware components of B-VIS (Burapha
Vehicle-Infrastructure System). The proposed B-VIS middleware architecture serves the needs of a distributed RFID sensor network and simplifies some intricate details of several communication standards.
Abstract: The rapid advance of communication technology is
evolving the network environment into the broadband convergence
network. Likewise, the IT services operated in the individual network
are also being quickly converged in the broadband convergence
network environment. VoIP and IPTV are two examples of such new
services. Efforts are being made to develop the video phone service,
which is an advanced form of the voice-oriented VoIP service.
However, the new IT services will be subject to stability and reliability
vulnerabilities if the relevant security issues are not answered during
the convergence of the existing IT services currently being operated in
individual networks within the wider broadband network
environment. To resolve such problems, this paper attempts to analyze
the possible threats and identify the necessary security measures
before the deployment of the new IT services. Furthermore, it
measures the quality of the encryption algorithm application example
to describe the appropriate algorithm in order to present security
technology that will have no negative impact on the quality of the
video phone service.
Abstract: The author present PID controller design for
following control of hard disk drive by characteristic ratio assignment
method. The study in this paper concerns design of a PID controller
which sufficiently robust to the disturbances and plant perturbations
on following control of hard disk drive. Characteristic Ratio
Assignment (CRA) is shown to be an efficient control technique to
serve this requirement. The controller design by CRA is based on the
choice of the coefficients of the characteristic polynomial of the
closed loop system according to the convenient performance criteria
such as equivalent time constant and ration of characteristic
coefficient. Hence, in this study, CRA method is applied in PID
controller design for following control of hard disk drive. Matlab
simulation results shown that CRA design is fairly stable and robust
whilst giving the convenience in controller-s parameters adjustment.
Abstract: The subcellular organelles called oil bodies (OBs) are lipid-filled quasi-spherical droplets produced from the endoplasmic reticulum (ER) and then released into the cytoplasm during seed development. It is believed that an OB grows by coalescence with other OBs and that its stability depends on the composition of oleosins, major proteins inserted in the hemi membrane that covers OBs. In this study, we measured the OB-volume distribution from different genotypes of A. thaliana after 7, 8, 9, 10 and 11 days of seed development. In order to test the hypothesis of OBs dynamics, we developed a simple mathematical model using non-linear differential equations inspired from the theory of coagulation. The model describes the evolution of OB-volume distribution during the first steps of seed development by taking into consideration the production of OBs, the increase of triacylglycerol volume to be stored, and the growth by coalescence of OBs. Fitted parameters values show an increase in the OB production and coalescence rates in A. thaliana oleosin mutants compared to wild type.
Abstract: The rapid urbanization of cities has a bane in the form
road accidents that cause extensive damage to life and limbs. A
number of location based factors are enablers of road accidents in the
city. The speed of travel of vehicles is non-uniform among locations
within a city. In this study, the perception of vehicle users is captured
on a 10-point rating scale regarding the degree of variation in speed
of travel at chosen locations in the city. The average rating is used to
cluster locations using fuzzy c-means clustering and classify them as
low, moderate and high speed of travel locations. The high speed of
travel locations can be classified proactively to ensure that accidents
do not occur due to the speeding of vehicles at such locations. The
advantage of fuzzy c-means clustering is that a location may be a
part of more than one cluster to a varying degree and this gives a
better picture about the location with respect to the characteristic
(speed of travel) being studied.
Abstract: In this paper multivariable predictive PID controller has
been implemented on a multi-inputs multi-outputs control problem
i.e., quadruple tank system, in comparison with a simple multiloop
PI controller. One of the salient feature of this system is an
adjustable transmission zero which can be adjust to operate in both
minimum and non-minimum phase configuration, through the flow
distribution to upper and lower tanks in quadruple tank system.
Stability and performance analysis has also been carried out for this
highly interactive two input two output system, both in minimum
and non-minimum phases. Simulations of control system revealed
that better performance are obtained in predictive PID design.
Abstract: The segmentation of endovascular tools in fluoroscopy images can be accurately performed automatically or by minimum user intervention, using known modern techniques. It has been proven in literature, but no clinical implementation exists so far because the computational time requirements of such technology have not yet been met. A classical segmentation scheme is composed of edge enhancement filtering, line detection, and segmentation. A new method is presented that consists of a vector that propagates in the image to track an edge as it advances. The filtering is performed progressively in the projected path of the vector, whose orientation allows for oriented edge detection, and a minimal image area is globally filtered. Such an algorithm is rapidly computed and can be implemented in real-time applications. It was tested on medical fluoroscopy images from an endovascular cerebral intervention. Ex- periments showed that the 2D tracking was limited to guidewires without intersection crosspoints, while the 3D implementation was able to cope with such planar difficulties.
Abstract: Ren et al. presented an efficient carrier frequency offset
(CFO) estimation method for orthogonal frequency division multiplexing
(OFDM), which has an estimation range as large as the
bandwidth of the OFDM signal and achieves high accuracy without
any constraint on the structure of the training sequence. However,
its detection probability of the integer frequency offset (IFO) rapidly
varies according to the fractional frequency offset (FFO) change. In
this paper, we first analyze the Ren-s method and define two criteria
suitable for detection of IFO. Then, we propose a novel method for
the IFO estimation based on the maximum-likelihood (ML) principle
and the detection criteria defined in this paper. The simulation results
demonstrate that the proposed method outperforms the Ren-s method
in terms of the IFO detection probability irrespective of a value of
the FFO.
Abstract: Today with the rapid growth of telecommunications equipment, electronic and developing more and more networks of power, influence of electromagnetic waves on one another has become hot topic discussions. So in this article, this issue and appropriate mechanisms for EMC operations have been presented. First, impact of high voltage lines on the surrounding environment especially on the control room has been investigated, then to reduce electromagnetic radiation, various methods of shielding are provided and shielding effectiveness of them has been compared. It should be expressed that simulations have been done by the finite element method (FEM).
Abstract: Soil washing process with a surfactant solution is a potential technology for the rapid removal of hydrophobic organic compound (HOC) from soil. However, large amount of washed water would be produced during operation and this should be treated effectively by proper methods. The soil washed water for complex contaminated site with HOC and heavy metals might contain high amount of pollutants such as HOC and heavy metals as well as used surfactant. The heavy metals in the soil washed water have toxic effects on microbial activities thus these should be removed from the washed water before proceeding to a biological waste-water treatment system. Moreover, the used surfactant solutions are necessary to be recovered for reducing the soil washing operation cost. In order to simultaneously remove the heavy metals and HOC from soil-washed water, activated carbon (AC) was used in the present study. In an anionic-nonionic surfactant mixed solution, the Cd(II) and phenanthrene (PHE) were effectively removed by adsorption on activated carbon. The removal efficiency for Cd(II) was increased from 0.027 mmol-Cd/g-AC to 0.142 mmol-Cd/g-AC as the mole ratio of SDS increased in the presence of PHE. The adsorptive capacity of PHE was also increased according to the SDS mole ratio due to the decrement of molar solubilization ratios (MSR) for PHE in an anionic-nonionic surfactant mixture. The simultaneous adsorption of HOC and cationic heavy metals using activated carbon could be a useful method for surfactant recovery and the reduction of heavy metal toxicity in a surfactant-enhanced soil washing process.
Abstract: Since Cloud environment has appeared as the most powerful
keyword in the computing industry, the growth in VDI (Virtual Desktop
Infrastructure) became remarkable in domestic market. In recent years, with the trend
that mobile devices such as smartphones and pads spread so rapidly, the strengths of
VDI that allows people to access and perform business on the move along with
companies' office needs expedite more rapid spread of VDI.
In this paper, mobile OTP (One-Time Password) authentication method is proposed
to secure mobile device portability through rapid and secure authentication using
mobile devices such as mobile phones or pads, which does not require additional
purchase or possession of OTP tokens of users. To facilitate diverse and wide use of
Services in the future, service should be continuous and stable, and above all, security
should be considered the most important to meet advanced portability and user
accessibility, the strengths of VDI.
Abstract: Silver nano-particles have been used for antibacterial
purpose and it is also believed to have removal of odorous compounds,
oxidation capacity as a metal catalyst. In this study, silver
nano-particles in nano sizes (5-30 nm) were prepared on the surface of
NaHCO3, the supporting material, using a sputtering method that
provided high silver content and minimized conglomerating problems
observed in the common AgNO3 photo-deposition method. The silver
nano-particles were dispersed by dissolving Ag-NaHCO3 into water,
and the dispersed silver nano-particles in the aqueous phase were
applied to remove inorganic odor compounds, H2S, in a scrubbing
reactor. Hydrogen sulfide in the gas phase was rapidly removed by the
silver nano-particles, and the concentration of sulfate (SO4
2-) ion
increased with time due to the oxidation reaction by silver as a
catalyst. Consequently, the experimental results demonstrated that the
silver nano-particles in the aqueous solution can be successfully
applied to remove odorous compounds without adding additional
energy sources and producing any harmful byproducts
Abstract: Snake bite cases in Malaysia most often involve the
species Naja-naja and Calloselasma rhodostoma. In keeping with the
need for a rapid snake venom detection kit in a clinical setting, plate
and dot-ELISA test for the venoms of Naja-naja sumatrana,
Calloselasma rhodostoma and the cobra venom fraction V antigen
was developed. Polyclonal antibodies were raised and further used to
prepare the reagents for the dot-ELISA test kit which was tested in
mice, rabbit and virtual human models. The newly developed dot-
ELISA kit was able to detect a minimum venom concentration of
244ng/ml with cross reactivity of one antibody type. The dot-ELISA
system was sensitive and specific for all three snake venom types in
all tested animal models. The lowest minimum venom concentration
detectable was in the rabbit model, 244ng/ml of the cobra venom
fraction V antigen. The highest minimum venom concentration was
in mice, 1953ng/ml against a multitude of venoms. The developed
dot-ELISA system for the detection of three snake venom types was
successful with a sensitivity of 95.8% and specificity of 97.9%.
Abstract: This paper suggests a rethinking of the existing
research about Genetically Modified (GM) food. Since the first batch
of GM food was commercialised in the UK market, GM food rapidly
received and lost media attention in the UK. Disagreement on GM
food policy between the US and the EU has also drawn scholarly
attention to this issue. Much research has been carried out intending to
understand people-s views about GM food and the shaping of these
views. This paper was based on the data collected in twenty-nine
semi-structured interviews, which were examined through Erving
Goffman-s idea of self-presentation in interactions to suggest that the
existing studies investigating “consumer attitudes" towards GM food
have only considered the “front stage" in the dramaturgic metaphor.
This paper suggests that the ways in which people choose to present
themselves when participating these studies should be taken into
account during the data analysis.