Abstract: The study of piezoelectric material in the past was in
T-Domain form; however, no one has studied piezoelectric material in the S-Domain form. This paper will present the piezoelectric material in the transfer function or S-Domain model. S-Domain is a
well known mathematical model, used for analyzing the stability of the material and determining the stability limits. By using S-Domain
in testing stability of piezoelectric material, it will provide a new tool for the scientific world to study this material in various forms.
Abstract: Organochlorine pesticides (OCPs) are known to be
persistent and bioaccumulative toxicants that may cause reproductive
impairments in wildlife as well as human. The current study uses the
snail-eating turtle Malayemys macrocephala, a long-lived animal
commonly distribute in rice field habitat in central part of Thailand,
as a sentinel to monitor OCP contamination in environment. The
nest soil, complete clutch of eggs, and blood of the turtle were
collected from agricultural areas in the Chao Phraya River Basin,
Thailand during the nesting season of 2007-2008. The novel
methods for tissue extraction by an accelerated solvent extractor
(ASE, for egg) and liquid-liquid extraction (for blood) have been
developed. The nineteen OCP residues were analyzed by gas
chromatography with micro-electron captured detector (GC-μECD).
The validated methods have met requirements of the AOAC
standard. The results indicated that significant amounts of OCPs are
still contaminated in nest soil and eggs of the turtle even though the
OCPs had been banned in this area for many years. This suggested
the potential risk to health of wildlife as well as human in the area.
Abstract: This paper deals with the problem of thermal and
mechanical shocks, which rising during operation, mostly at
interrupted cut. Here will be solved their impact on the cutting edge
tool life, the impact of coating technology on resistance to shocks
and experimental determination of tool life in heating flame.
Resistance of removable cutting edges against thermal and
mechanical shock is an important indicator of quality as well as its
abrasion resistance. Breach of the edge or its crumble may occur due
to cyclic loading. We can observe it not only during the interrupted
cutting (milling, turning areas abandoned hole or slot), but also in
continuous cutting. This is due to the volatility of cutting force on
cutting. Frequency of the volatility in this case depends on the type
of rising chips (chip size element). For difficult-to-machine materials
such as austenitic steel particularly happened at higher cutting speeds
for the localization of plastic deformation in the shear plane and for
the inception of separate elements substantially continuous chips.
This leads to variations of cutting forces substantially greater than for
other types of steel.
Abstract: A pilot project was carried out in 2007 by the senior
students of Cyprus International University, aiming to minimize the
total cost of waste collection in Northern Cyprus. Many developed
and developing countries have cut their transportation costs – which
lies between 30-40% – down at a rate of 40% percent, by
implementing network models for their route assignments.
Accordingly, a network model was implemented at Göçmenköy
district, to optimize and standardize waste collection works. The
work environment of the employees were also redesigned to provide
maximum ergonomy and to increase productivity, efficiency and
safety. Following the collection of the required data including waste
densities, lengths of roads and population, a model was constructed
to allocate the optimal route assignment for the waste collection
trucks at Göçmenköy district.
Abstract: Offset Double-Disk Opener (DDO) is a popular
furrow opener in conservation tillage. It has some limitations such as
negative suction to penetrate in the soil, hair pinning and mixing seed
and fertilizer in the slot. Because of importance of separation of seed
and fertilizer in the slot, by adding two horizontal mini disks to DDO
a modified opener was made (MDO) which placed the fertilizer
between and under two rows of seed. To consider performance of
novel opener an indoor comparison test between DDO and MDO was
performed at soil bin. The experiment was conducted with three
working speeds (3, 6 and 8 km h-1), two bulk densities of soil (1.1
and 1.4 Mg m-3) and two levels of residues (1 and 2 ton ha-1). The
experimental design consisted in a (3×2×2) complete randomized
factorial with three replicates for each test. Moisture of seed furrow,
separation of seed and fertilizer, hair pinning and resultant forces
acting on the openers were used as assessing indexes. There was no
significant difference between soil moisture content in slots created
by DDO and MDO at 0-4 cm depth, but at 4-8 cm the in the slot
created by MDO moisture content was higher about 9%. Horizontal
force for both openers increased with increasing speed and soil bulk
density. Vertical force for DDO was negative so it needed additional
weight for penetrating in the soil, but vertical force for MDO was
positive and, which can solve the challenge of penetration in the soil
in DDO. In soft soil with heavy residues some trash was pushed by
DDO into seed furrow (hair pinning) but at MDO seed were placed at
clean groove. Lateral and vertical separation of seed and fertilizer
was performed effectively by MDO (4.5 and 5 cm, respectively)
while DDO put seed and fertilizer close to each other. Overall, the
Modified Offset Double-disks (MDO) had better performance. So by
adapting this opener with no-tillage drillers it would possible to have
higher yield in conservation tillage where the most appropriate
opener is disk type.
Abstract: Domain-specific languages describe specific solutions to problems in the application domain. Traditionally they form a solution composing black-box abstractions together. This, usually, involves non-deep transformations over the target model. In this paper we argue that it is potentially powerful to operate with grey-box abstractions to build a domain-specific software system. We present parametric code templates as grey-box abstractions and conceptual tools to encapsulate and manipulate these templates. Manipulations introduce template-s merging routines and can be defined in a generic way. This involves reasoning mechanisms at the code templates level. We introduce the concept of Neurath Modelling Language (NML) that operates with parametric code templates and specifies a visualisation mapping mechanism for target models. Finally we provide an example of calculating a domain-specific software system with predefined NML elements.
Abstract: This paper introduces a framework that aims to
support the design and development of mobile services. The
traditional innovation process and its supporting instruments in form
of creativity tools, acceptance research and user-generated content
analysis are screened for potentials for improvement. The result is a
reshaped innovation process where acceptance research and usergenerated
content analysis are fully integrated within a creativity
tool. Advantages of this method are the enhancement of design
relevant information for developers and designers and the possibility
to forecast market success.
Abstract: The proper design of RF pulses in magnetic resonance imaging (MRI) has a direct impact on the quality of acquired images, and is needed for many applications. Several techniques have been proposed to obtain the RF pulse envelope given the desired slice profile. Unfortunately, these techniques do not take into account the limitations of practical implementation such as limited amplitude resolution. Moreover, implementing constraints for special RF pulses on most techniques is not possible. In this work, we propose to develop an approach for designing optimal RF pulses under theoretically any constraints. The new technique will pose the RF pulse design problem as a combinatorial optimization problem and uses efficient techniques from this area such as genetic algorithms (GA) to solve this problem. In particular, an objective function will be proposed as the norm of the difference between the desired profile and the one obtained from solving the Bloch equations for the current RF pulse design values. The proposed approach will be verified using analytical solution based RF simulations and compared to previous methods such as Shinnar-Le Roux (SLR) method, and analysis, selected, and tested the options and parameters that control the Genetic Algorithm (GA) can significantly affect its performance to get the best improved results and compared to previous works in this field. The results show a significant improvement over conventional design techniques, select the best options and parameters for GA to get most improvement over the previous works, and suggest the practicality of using of the new technique for most important applications as slice selection for large flip angles, in the area of unconventional spatial encoding, and another clinical use.
Abstract: Two-phase frictional pressure drop data were
obtained for condensation of carbon dioxide in single horizontal
micro tube of inner diameter ranged from 0.6 mm up to 1.6 mm over
mass flow rates from 2.5*10-5 to 17*10-5 kg/s and vapor qualities
from 0.0 to 1.0. The inlet condensing pressure is changed from 33.5
to 45 bars. The saturation temperature ranged from -1.5 oC up to 10
oC. These data have then been compared against three (two-phase)
frictional pressure drop prediction methods. The first method is by
Muller-Steinhagen and Heck (Muller-Steinhagen H, Heck K. A
simple friction pressure drop correlation for two-phase flow in pipes.
Chem. Eng. Process 1986;20:297–308) and that by Gronnerud R.
Investigation of liquid hold-up, flow-resistance and heat transfer in
circulation type evaporators, part IV: two-phase flow resistance in
boiling refrigerants, Annexe 1972. Then the method used by
FriedelL. Improved friction pressures drop in horizontal and vertical
two-phase pipe flow. European Two-Phase Flow Group Meeting,
Paper E2; 1979 June, Ispra, Italy. The methods are used by M.B Ould
Didi et al (2001) “Prediction of two-phase pressure gradients of
refrigerant in horizontal tubes". Int.J.of Refrigeration 25(2002) 935-
947. The best available method for annular flow was that of Muller-
Steinhagen and Heck. It was observed that the peak in the two-phase
frictional pressure gradient is at high vapor qualities.
Abstract: The rotation of starting pitchers is a strategic issue
which has a significant impact on the performance of a professional
team. Choosing an optimal starting pitcher from among many
alternatives is a multi-criteria decision-making (MCDM) problem. In
this study, a model using the Analytic Hierarchy Process (AHP) and
Technique for Order Performance by Similarity to the Ideal Solution
(TOPSIS) is proposed with which to arrange the starting pitcher
rotation for teams of the Chinese Professional Baseball League. The
AHP is used to analyze the structure of the starting pitcher selection
problem and to determine the weights of the criteria, while the
TOPSIS method is used to make the final ranking. An empirical
analysis is conducted to illustrate the utilization of the model for the
starting pitcher rotation problem. The results demonstrate the
effectiveness and feasibility of the proposed model.
Abstract: The current trend of increasing quality and demands
of the final product is affected by time analysis of the entire
manufacturing process. The primary requirement of manufacturing is
to produce as many products as soon as possible, at the lowest
possible cost, but of course with the highest quality. Such
requirements may be satisfied only if all the elements entering and
affecting the production cycle are in a fully functional condition.
These elements consist of sensory equipment and intelligent control
elements that are essential for building intelligent manufacturing
systems. The intelligent manufacturing paradigm includes a new
approach to production system structure design. Intelligent behaviors
are based on the monitoring of important parameters of system and
its environment. The flexible reaction to changes. The realization and
utilization of this design paradigm as an "intelligent manufacturing
system" enables the flexible system reaction to production
requirement as soon as environmental changes too. Results of these
flexible reactions are a smaller layout space, be decreasing of
production and investment costs and be increasing of productivity.
Intelligent manufacturing system itself should be a system that can
flexibly respond to changes in entering and exiting the process in
interaction with the surroundings.
Abstract: The Neuro-Fuzzy hybridization scheme has become
of research interest in pattern classification over the past decade. The
present paper proposes a novel Modified Adaptive Fuzzy Inference
Engine (MAFIE) for pattern classification. A modified Apriori
algorithm technique is utilized to reduce a minimal set of decision
rules based on input output data sets. A TSK type fuzzy inference
system is constructed by the automatic generation of membership
functions and rules by the fuzzy c-means clustering and Apriori
algorithm technique, respectively. The generated adaptive fuzzy
inference engine is adjusted by the least-squares fit and a conjugate
gradient descent algorithm towards better performance with a
minimal set of rules. The proposed MAFIE is able to reduce the
number of rules which increases exponentially when more input
variables are involved. The performance of the proposed MAFIE is
compared with other existing applications of pattern classification
schemes using Fisher-s Iris and Wisconsin breast cancer data sets and
shown to be very competitive.
Abstract: This study was aimed for investigating of
manufacturing high aluminum content Mg alloys using a horizontal
twin roll caster. Recently, weight saving has been key issues for lighter
transport equipments as well as electronic component parts. As
alternative materials to aluminum alloys, developing magnesium alloy
with higher strength has been expected. Normally high Aluminum
content Mg alloy has poor ductility and is difficult to be rolled because
of its high strength. However, twin roll casting process is suitable for
manufacturing wrought Mg alloys because materials can be cast
directly from molten metal. In this study, manufacturing of high
aluminum content magnesium alloy sheet using the roll casting
process has been carried out. Effects of manufacturing parameter, such
as roll velocity, pouring temperature and roll gap, on casting was
investigated. A microscopic observation of the crystals of cross section
of as cast strip as well as rolled strip was conducted.
Abstract: The aim of this paper is to present current and future
procedures in castings procurement. Differences in procurement are
highlighted. The supplier selection criteria used in practice is
compared to literature findings. Different trends related to supply
chains are presented and it is described how they are reflected in
reality to castings procurement. To fulfil the aim, interviews were
conducted in nine companies using castings. It was found that largest
casting users have the most subcontractor foundries and it is more
typical that they have multiple suppliers for the same parts. Currently
only two companies out of nine purchase castings outside Europe,
but the others are also progressing in the same direction. The main
reason is the need to lower purchasing costs. Another trend is that all
companies want to buy cast components or sub-assemblies instead of
raw castings from foundries. It was found that price is a main
supplier selection criterion. All companies use competitive bidding in
supplier selection.
Abstract: Ten percent of the population will develop plantar
fasciitis (PF) during their lifetime. Two million people are treated
yearly accounting for 11-15% of visits to medical professionals.
Treatment ranges from conservative to surgical intervention. The
purpose of this study was to assess the effects of extracorporeal
shockwave therapy (ECSWT) on heel pain, function, range of motion
(ROM), and strength in patients with PF. One hundred subjects were
treated with ECSWT and measures were taken before and three
months after treatment. There was significant differences in visual
analog scale scores for pain at rest (p=0.0001); after activity (p=
0.0001) and; overall improvement (p=0.0001). There was also
significant improvement in Lower Extremity Functional Scale scores
(p=0.0001); ankle plantarflexion (p=0.0001), dorsiflexion (p=0.001),
and eversion (p=0.017),and first metatarsophalangeal joint flexion
(p=0.002) and extension (p=0.003) ROM. ECSWT is an effective
treatment improving heel pain, function and ROM in patients with
PF.
Abstract: The shortest path routing problem is a multiobjective nonlinear optimization problem with constraints. This problem has been addressed by considering Quality of service parameters, delay and cost objectives separately or as a weighted sum of both objectives. Multiobjective evolutionary algorithms can find multiple pareto-optimal solutions in one single run and this ability makes them attractive for solving problems with multiple and conflicting objectives. This paper uses an elitist multiobjective evolutionary algorithm based on the Non-dominated Sorting Genetic Algorithm (NSGA), for solving the dynamic shortest path routing problem in computer networks. A priority-based encoding scheme is proposed for population initialization. Elitism ensures that the best solution does not deteriorate in the next generations. Results for a sample test network have been presented to demonstrate the capabilities of the proposed approach to generate well-distributed pareto-optimal solutions of dynamic routing problem in one single run. The results obtained by NSGA are compared with single objective weighting factor method for which Genetic Algorithm (GA) was applied.
Abstract: As an effort to promote wind power industry in Korea,
Korea South-East Power Corporation has been developing 22MW
YeungHeung wind farm consisting of nine 2 to 3MW wind turbines
supplied by three manufacturers. To maximize its availability and
reliability and to solve the difficulty of operating three kinds of
SCADA systems, Korea Electric Power Corporation has been
developing a condition monitoring system integrated with control
functions. This paper presents the developed condition monitoring
system and its application to YeungHeung wind test bed, and the
design of its control functions.
Abstract: Data warehousing success is not high enough. User
dissatisfaction and failure to adhere to time frames and budgets are
too common. Most traditional information systems practices are
rooted in hard systems thinking. Today, the great systems thinkers
are forgotten by information systems developers. A data warehouse
is still a system and it is worth investigating whether systems
thinkers such as Churchman can enhance our practices today. This
paper investigates data warehouse development practices from a
systems thinking perspective. An empirical investigation is done in
order to understand the everyday practices of data warehousing
professionals from a systems perspective. The paper presents a
model for the application of Churchman-s systems approach in data
warehouse development.
Abstract: Dynamic location referencing method is an important technology to shield map differences. These method references objects of the road network by utilizing condensed selection of its real-world geographic properties stored in a digital map database, which overcomes the defections existing in pre-coded location referencing methods. The high attributes completeness requirements and complicated reference point selection algorithm are the main problems of recent researches. Therefore, a dynamic location referencing algorithm combining intersection points selected at the extremities compulsively and road link points selected according to link partition principle was proposed. An experimental system based on this theory was implemented. The tests using Beijing digital map database showed satisfied results and thus verified the feasibility and practicability of this method.
Abstract: In this study, communities of ammonia-oxidizing
archaea (AOA) and ammonia-oxidizing bacteria (AOB) in nitrifying
activated sludge (NAS) prepared by enriching sludge from a
municipal wastewater treatment plant in three continuous-flow
reactors receiving an inorganic medium containing different
ammonium concentrations of 2, 10, and 30 mM NH4
+-N (NAS2,
NAS10, and NAS30, respectively) were investigated using molecular
analysis. Results suggested that almost all AOA clones from NAS2,
NAS10, and NAS30 fell into the same AOA cluster and AOA
communities in NAS2 and NAS10 were more diverse than those of
NAS30. In contrast to AOA, AOB communities obviously shifted
from the seed sludge to enriched NASs and in each enriched NAS,
communities of AOB varied particularly. The seed sludge contained
members of N. communis cluster and N. oligotropha cluster. After it
was enriched under various ammonium loads, members of N.
communis cluster disappeared from all enriched NASs. AOB with
high affinity to ammonia presented in NAS 2, AOB with low affinity
to ammonia presented in NAS 30, and both types of AOB survived in
NAS 10. These demonstrated that ammonium load significantly
influenced AOB communities, but not AOA communities in enriched
NASs.