Abstract: The common bean is the most important grain legume for direct human consumption in the world and BCMV is one of the world's most serious bean diseases that can reduce yield and quality of harvested product. To determine the best tolerance index to BCMV and recognize tolerant genotypes, 2 experiments were conducted in field conditions. Twenty five common bean genotypes were sown in 2 separate RCB design with 3 replications under contamination and non-contamination conditions. On the basis of the results of indices correlations GMP, MP and HARM were determined as the most suitable tolerance indices. The results of principle components analysis indicated 2 first components totally explained 98.52% of variations among data. The first and second components were named potential yield and stress susceptible respectively. Based on the results of BCMV tolerance indices assessment and biplot analysis WA8563-4, WA8563-2 and Cardinal were the genotypes that exhibited potential seed yield under contamination and noncontamination conditions.
Abstract: The paper presents the optimization problem for the
multi-element synthetic transmit aperture method (MSTA) in
ultrasound imaging applications. The optimal choice of the transmit
aperture size is performed as a trade-off between the lateral
resolution, penetration depth and the frame rate. Results of the
analysis obtained by a developed optimization algorithm are
presented. Maximum penetration depth and the best lateral resolution
at given depths are chosen as the optimization criteria. The
optimization algorithm was tested using synthetic aperture data of
point reflectors simulated by Filed II program for Matlab® for the
case of 5MHz 128-element linear transducer array with 0.48 mm
pitch are presented. The visualization of experimentally obtained
synthetic aperture data of a tissue mimicking phantom and in vitro
measurements of the beef liver are also shown. The data were
obtained using the SonixTOUCH Research systemequipped with a
linear 4MHz 128 element transducerwith 0.3 mm element pitch, 0.28
mm element width and 70% fractional bandwidth was excited by one
sine cycle pulse burst of transducer's center frequency.
Abstract: It-s known that incorporating prior knowledge into support
vector regression (SVR) can help to improve the approximation
performance. Most of researches are concerned with the incorporation
of knowledge in the form of numerical relationships. Little work,
however, has been done to incorporate the prior knowledge on the
structural relationships among the variables (referred as to Structural
Prior Knowledge, SPK). This paper explores the incorporation of SPK
in SVR by constructing appropriate admissible support vector kernel
(SV kernel) based on the properties of reproducing kernel (R.K).
Three-levels specifications of SPK are studied with the corresponding
sub-levels of prior knowledge that can be considered for the method.
These include Hierarchical SPK (HSPK), Interactional SPK (ISPK)
consisting of independence, global and local interaction, Functional
SPK (FSPK) composed of exterior-FSPK and interior-FSPK. A
convenient tool for describing the SPK, namely Description Matrix
of SPK is introduced. Subsequently, a new SVR, namely Motivated
Support Vector Regression (MSVR) whose structure is motivated
in part by SPK, is proposed. Synthetic examples show that it is
possible to incorporate a wide variety of SPK and helpful to improve
the approximation performance in complex cases. The benefits of
MSVR are finally shown on a real-life military application, Air-toground
battle simulation, which shows great potential for MSVR to
the complex military applications.
Abstract: The effects of down slope steepness on soil splash distribution under a water drop impact have been investigated in this study. The equipment used are the burette to simulate a water drop, a splash cup filled with sandy soil which forms the source area and a splash board to collect the ejected particles. The results found in this study have shown that the apparent mass increased with increasing downslope angle following a linear regression equation with high coefficient of determination. In the same way, the radial soil splash distribution over the distance has been analyzed statistically, and an exponential function was the best fit of the relationship for the different slope angles. The curves and the regressions equations validate the well known FSDF and extend the theory of Van Dijk.
Abstract: This paper suggests an improved integer frequency
offset (IFO) estimation scheme using P1 symbol for orthogonal
frequency division multiplexing (OFDM) based the second generation
terrestrial digital video broadcasting (DVB-T2) system. Proposed
IFO estimator is designed by a low-complexity blind IFO estimation
scheme, which is implemented with complex additions. Also, we
propose active carriers (ACs) selection scheme in order to prevent
performance degradation in blind IFO estimation. The simulation
results show that under the AWGN and TU6 channels, the proposed
method has low complexity than conventional method and almost
similar performance in comparison with the conventional method.
Abstract: PPX(Pretty Printer for XML) is a query language that offers a concise description method of formatting the XML data into HTML. In this paper, we propose a simple specification of formatting method that is a combination description of automatic layout operators and variables in the layout expression of the GENERATE clause of PPX. This method can automatically format irregular XML data included in a part of XML with layout decision rule that is referred to DTD. In the experiment, a quick comparison shows that PPX requires far less description compared to XSLT or XQuery programs doing same tasks.
Abstract: This paper proposes a fast code acquisition scheme for
optical code division multiple access (O-CDMA) systems. Unlike the
conventional scheme, the proposed scheme employs multiple thresholds
providing a shorter mean acquisition time (MAT) performance.
The simulation results show that the MAT of the proposed scheme
is shorter than that of the conventional scheme.
Abstract: This article outlines conceptualization and
implementation of an intelligent system capable of extracting
knowledge from databases. Use of hybridized features of both the
Rough and Fuzzy Set theory render the developed system flexibility
in dealing with discreet as well as continuous datasets. A raw data set
provided to the system, is initially transformed in a computer legible
format followed by pruning of the data set. The refined data set is
then processed through various Rough Set operators which enable
discovery of parameter relationships and interdependencies. The
discovered knowledge is automatically transformed into a rule base
expressed in Fuzzy terms. Two exemplary cancer repository datasets
(for Breast and Lung Cancer) have been used to test and implement
the proposed framework.
Abstract: Evolutionary Algorithms are population-based,
stochastic search techniques, widely used as efficient global
optimizers. However, many real life optimization problems often
require finding optimal solution to complex high dimensional,
multimodal problems involving computationally very expensive
fitness function evaluations. Use of evolutionary algorithms in such
problem domains is thus practically prohibitive. An attractive
alternative is to build meta models or use an approximation of the
actual fitness functions to be evaluated. These meta models are order
of magnitude cheaper to evaluate compared to the actual function
evaluation. Many regression and interpolation tools are available to
build such meta models. This paper briefly discusses the
architectures and use of such meta-modeling tools in an evolutionary
optimization context. We further present two evolutionary algorithm
frameworks which involve use of meta models for fitness function
evaluation. The first framework, namely the Dynamic Approximate
Fitness based Hybrid EA (DAFHEA) model [14] reduces
computation time by controlled use of meta-models (in this case
approximate model generated by Support Vector Machine
regression) to partially replace the actual function evaluation by
approximate function evaluation. However, the underlying
assumption in DAFHEA is that the training samples for the metamodel
are generated from a single uniform model. This does not take
into account uncertain scenarios involving noisy fitness functions.
The second model, DAFHEA-II, an enhanced version of the original
DAFHEA framework, incorporates a multiple-model based learning
approach for the support vector machine approximator to handle
noisy functions [15]. Empirical results obtained by evaluating the
frameworks using several benchmark functions demonstrate their
efficiency
Abstract: The aim of this paper is to present a new method
which can be used for progressive transmission of electrocardiogram
(ECG). The idea consists in transforming any ECG signal to an
image, containing one beat in each row. In the first step, the beats are
synchronized in order to reduce the high frequencies due to inter-beat
transitions. The obtained image is then transformed using a discrete
version of Radon Transform (DRT). Hence, transmitting the ECG,
leads to transmit the most significant energy of the transformed
image in Radon domain. For decoding purpose, the receptor needs to
use the inverse Radon Transform as well as the two synchronization
frames.
The presented protocol can be adapted for lossy to lossless
compression systems. In lossy mode we show that the compression
ratio can be multiplied by an average factor of 2 for an acceptable
quality of reconstructed signal. These results have been obtained on
real signals from MIT database.
Abstract: In present work, drying characteristics of fresh papaya (Carica papaya L.) was studied to understand the dehydration process and its behavior. Drying experiments were carried out by a laboratory scaled microwave-vacuum oven. The parameters affecting drying characteristics including operating modes (continuous, pulsed), microwave power (400 and 800 W), and vacuum pressure (20, 30, and 40 cmHg) were investigated. For pulsed mode, two levels of power-off time (60 and 120 s) were used while the power-on time was fixed at 60 s and the vacuum pressure was fixed at 40 cmHg. For both operating modes, the effects of drying conditions on drying time, drying rate, and effective diffusivity were investigated. The results showed high microwave power, high vacuum, and pulsed mode of 60 s-on/60 s-off favored drying rate as shown by the shorten drying time and increased effective diffusivity. The drying characteristics were then described by Page-s model, which showed a good agreement with experimental data.
Abstract: This research sought to discover the forms of
promotion and dissemination of traditional local wisdom that are
used to create occupations among the elderly at Noanmueng
Community, Muang Sub-District, Baan Doong District, Udornthani
Province. The criteria used to select the research sample group were:
having a role involved in the promotion and dissemination of
traditional local wisdom to create occupations among the elderly;
being an experienced person who the residents of Noanmueng
Community find trustworthy; and having lived in Noanmueng
Community for a long time so as to be able to see the development
and change that occurs. A total of 16 persons were thus selected. Data
was gathered through a qualitative study, using semi-structured indepth
interviews. The collected data was then summarized and
discussed according to the research objectives. Finally, the data was
presented in narrative format. Results found that the identifying
traditional local wisdom of the community (which grew from the
residents’ experience and beneficial usage in daily life, passed down
from generation to generation) was the weaving of cloth and
basketry. As for the manner of promotion and dissemination of
traditional local wisdom, these skills were passed down through
teaching by example to family members, relatives and others in the
community. This was largely the initiative of the elders or elderly
members of the community. In order for the promotion and
dissemination of traditional local wisdom to create occupations
among the elderly, the traditional local wisdom should be supported
in every way through participation of the community members. For
example, establish a museum of traditional local wisdom for the
collection of traditional local wisdom in various fields, both from the
past and present innovations. This would be a source of pride for the
community, simultaneously helping traditional local wisdom to
become widely known and to create income for the community’s
elderly. Additional ways include organizing exhibitions of products
made by traditional local wisdom, finding both domestic and
international markets, as well as building both domestic and
international networks aiming to find opportunities to market
products made by traditional local wisdom.
Abstract: All practical real-time scheduling algorithms in multiprocessor systems present a trade-off between their computational complexity and performance. In real-time systems, tasks have to be performed correctly and timely. Finding minimal schedule in multiprocessor systems with real-time constraints is shown to be NP-hard. Although some optimal algorithms have been employed in uni-processor systems, they fail when they are applied in multiprocessor systems. The practical scheduling algorithms in real-time systems have not deterministic response time. Deterministic timing behavior is an important parameter for system robustness analysis. The intrinsic uncertainty in dynamic real-time systems increases the difficulties of scheduling problem. To alleviate these difficulties, we have proposed a fuzzy scheduling approach to arrange real-time periodic and non-periodic tasks in multiprocessor systems. Static and dynamic optimal scheduling algorithms fail with non-critical overload. In contrast, our approach balances task loads of the processors successfully while consider starvation prevention and fairness which cause higher priority tasks have higher running probability. A simulation is conducted to evaluate the performance of the proposed approach. Experimental results have shown that the proposed fuzzy scheduler creates feasible schedules for homogeneous and heterogeneous tasks. It also and considers tasks priorities which cause higher system utilization and lowers deadline miss time. According to the results, it performs very close to optimal schedule of uni-processor systems.
Abstract: Today we tend to go back to the past to our root
relation to nature. Therefore in search of friendly spaces there are
elements of natural environment introduced as elements of spatial
composition. Though reinvented through the use of the new
substance such as greenery, water etc. made possible by state of the
art technologies, still, in principal, they remain the same. As a result,
sustainable design, based upon the recognized means of composition
in addition to the relation of architecture and urbanism vs. nature
introduces a new aesthetical values into architectural and urban
space.
Abstract: This paper proposed a stiffness analysis method for a
3-PRS mechanism for welding thick aluminum plate using FSW
technology. In the molding process, elastic deformation of lead-screws
and links are taken into account. This method is based on the virtual
work principle. Through a survey of the commonly used stiffness
performance indices, the minimum and maximum eigenvalues of the
stiffness matrix are used to evaluate the stiffness of the 3-PRS
mechanism. Furthermore, A FEA model has been constructed to verify
the method. Finally, we redefined the workspace using the stiffness
analysis method.
Abstract: This paper introduces new algorithms (Fuzzy relative
of the CLARANS algorithm FCLARANS and Fuzzy c Medoids
based on randomized search FCMRANS) for fuzzy clustering of
relational data. Unlike existing fuzzy c-medoids algorithm (FCMdd)
in which the within cluster dissimilarity of each cluster is minimized
in each iteration by recomputing new medoids given current
memberships, FCLARANS minimizes the same objective function
minimized by FCMdd by changing current medoids in such away
that that the sum of the within cluster dissimilarities is minimized.
Computing new medoids may be effected by noise because outliers
may join the computation of medoids while the choice of medoids in
FCLARANS is dictated by the location of a predominant fraction of
points inside a cluster and, therefore, it is less sensitive to the
presence of outliers. In FCMRANS the step of computing new
medoids in FCMdd is modified to be based on randomized search.
Furthermore, a new initialization procedure is developed that add
randomness to the initialization procedure used with FCMdd. Both
FCLARANS and FCMRANS are compared with the robust and
linearized version of fuzzy c-medoids (RFCMdd). Experimental
results with different samples of the Reuter-21578, Newsgroups
(20NG) and generated datasets with noise show that FCLARANS is
more robust than both RFCMdd and FCMRANS. Finally, both
FCMRANS and FCLARANS are more efficient and their outputs
are almost the same as that of RFCMdd in terms of classification
rate.
Abstract: Versatile dual-mode class-AB CMOS four-quadrant
analog multiplier circuit is presented. The dual translinear loops and
current mirrors are the basic building blocks in realization scheme.
This technique provides; wide dynamic range, wide-bandwidth response
and low power consumption. The major advantages of this
approach are; its has single ended inputs; since its input is dual translinear
loop operate in class-AB mode which make this multiplier
configuration interesting for low-power applications; current multiplying,
voltage multiplying, or current and voltage multiplying can
be obtainable with balanced input. The simulation results of versatile
analog multiplier demonstrate a linearity error of 1.2 %, a -3dB bandwidth
of about 19MHz, a maximum power consumption of 0.46mW,
and temperature compensated. Operation of versatile analog multiplier
was also confirmed through an experiment using CMOS transistor
array.
Abstract: Concerning the inpatient care the present situation is
characterized by intense charges of medical technology into the
clinical daily routine and an ever stronger integration of special
techniques into the clinical workflow. Medical technology is by now
an integral part of health care according to consisting general
accepted standards. Purchase and operation thereby represent an
important economic position and both are subject of everyday
optimisation attempts. For this purpose by now exists a huge number
of tools which conduce more likely to a complexness of the problem
by a comprehensive implementation. In this paper the advantages of
an integrative information-workflow on the life-cycle-management in
the region of medical technology are shown.
Abstract: The purpose of this study was to evaluate and
compare new indices based on the discrete wavelet transform
with another spectral parameters proposed in the literature as
mean average voltage, median frequency and ratios between
spectral moments applied to estimate acute exercise-induced
changes in power output, i.e., to assess peripheral muscle
fatigue during a dynamic fatiguing protocol. 15 trained
subjects performed 5 sets consisting of 10 leg press, with 2
minutes rest between sets. Surface electromyography was
recorded from vastus medialis (VM) muscle. Several surface
electromyographic parameters were compared to detect
peripheral muscle fatigue. These were: mean average voltage
(MAV), median spectral frequency (Fmed), Dimitrov spectral
index of muscle fatigue (FInsm5), as well as other five
parameters obtained from the discrete wavelet transform
(DWT) as ratios between different scales. The new wavelet
indices achieved the best results in Pearson correlation
coefficients with power output changes during acute dynamic
contractions. Their regressions were significantly different
from MAV and Fmed. On the other hand, they showed the
highest robustness in presence of additive white gaussian
noise for different signal to noise ratios (SNRs). Therefore,
peripheral impairments assessed by sEMG wavelet indices
may be a relevant factor involved in the loss of power output
after dynamic high-loading fatiguing task.
Abstract: In this work, we improve a previously developed
segmentation scheme aimed at extracting edge information from
speckled images using a maximum likelihood edge detector. The
scheme was based on finding a threshold for the probability density
function of a new kernel defined as the arithmetic mean-to-geometric
mean ratio field over a circular neighborhood set and, in a general
context, is founded on a likelihood random field model (LRFM). The
segmentation algorithm was applied to discriminated speckle areas
obtained using simple elliptic discriminant functions based on
measures of the signal-to-noise ratio with fractional order moments.
A rigorous stochastic analysis was used to derive an exact expression
for the cumulative density function of the probability density
function of the random field. Based on this, an accurate probability
of error was derived and the performance of the scheme was
analysed. The improved segmentation scheme performed well for
both simulated and real images and showed superior results to those
previously obtained using the original LRFM scheme and standard
edge detection methods. In particular, the false alarm probability was
markedly lower than that of the original LRFM method with
oversegmentation artifacts virtually eliminated. The importance of
this work lies in the development of a stochastic-based segmentation,
allowing an accurate quantification of the probability of false
detection. Non visual quantification and misclassification in medical
ultrasound speckled images is relatively new and is of interest to
clinicians.