Abstract: The research study evaluated the performance of
irrigation system by using special scientific tools like Remote
Sensing and GIS technology, so that proper measurements could be
taken for the sustainable agriculture and water management.
Different performance evaluation parameters had been calculated for
the purposed data was gathered from field investigation and different
government and private organizations. According to the calculations,
organic matter ranges from 0.19% (low value) to 0.76% (high value).
In flat irrigation system for wheat yield ranges from 3347.16 to
5260.39 kg/ha, while the total water applied to wheat crop ranges
from 252.94 to 279.19 mm and WUE ranges from 13.07 to 18.37
kg/ha/mm. For rice yield ranges from 3347.47 to 5433.07 kg/ha with
total water supplied to rice crop ranges from 764.71 to 978.15 mm
and WUE ranges from 3.49 to 5.71 kg/ha/mm. Similarly, in raised
bed system wheat yield ranges from 4569.13 to 6008.60 kg/ha, total
water supplied ranges from 158.87 to 185.09 mm and WUE ranges
from 27.20 to 33.54 kg/ha/mm while in rice crop, yield ranges from
5285.04 to 6716.69 kg/ha, total water supplied ranges from 600.72 to
755.06 mm and WUE ranges from 6.41 to 10.05 kg/ha/mm. Almost
51.3% water saving is observed in bed irrigation system as compared
to flat system. Less water supplied to beds is more affective as its
WUE value is higher than flat system where more water is supplied
in both the seasons. Similarly, RWS values show that maximum
water deficit while minimum area is getting adequate water supply.
Greater yield is recorded in bed system as plant per square meter is
more in bed system in comparison of flat system Thus, the integration
of GIS tools to regularly compute performance indices could provide
irrigation managers with the means for managing efficiently the
irrigation system.
Abstract: β-Glucosidase is an important enzyme for production
of ethanol from lignocellulose. With hydrolytic activity on
cellooligosaccharides, especially cellobiose, β-glucosidase removes
product inhibitory effect on cellulases and forms fermentable sugars.
In this study, β-glucosidase encoding gene (BGL1) from traditional
starter yeast Saccharomycosis fibuligera BMQ908 was cloned and
expressed in Pichia pastoris. BGL1 of S. fibuligera BMQ 908 shared
98% nucleotide homology with the closest GenBank sequence
(M22475) but identity in amino-acid sequences of catalytic domains.
Recombinant plasmid pPICZαA/BGL1 containing the sequence
encoding BGL1 mature protein and α-factor secretion signal was
constructed and transformed into methylotrophic yeast P. pastoris by
electroporation. The recombinant strain produced single extracellular
protein with molecular weight of 120 kDa and cellobiase activity of
60 IU/ml. The optimum pH of the recombinant β-glucosidase was 5.0
and the optimum temperature was 50°C.
Abstract: This paper presents a complete procedure for tool path
planning and blade machining in 5-axis manufacturing. The actual
cutting contact and cutter locations can be determined by lead and tilt
angles. The tool path generation is implemented by piecewise curved
approximation and chordal deviation detection. An application about
drive surface method promotes flexibility of tool control and stability
of machine motion. A real manufacturing process is proposed to
separate the operation into three regions with five stages and to modify
the local tool orientation with an interactive algorithm.
Abstract: Generally speaking, the mobile robot is capable of
sensing its surrounding environment, interpreting the sensed
information to obtain the knowledge of its location and the
environment, planning a real-time trajectory to reach the object. In
this process, the issue of obstacle avoidance is a fundamental topic to
be challenged. Thus, an adaptive path-planning control scheme is
designed without detailed environmental information, large memory
size and heavy computation burden in this study for the obstacle
avoidance of a mobile robot. In this scheme, the robot can gradually
approach its object according to the motion tracking mode, obstacle
avoidance mode, self-rotation mode, and robot state selection. The
effectiveness of the proposed adaptive path-planning control scheme
is verified by numerical simulations of a differential-driving mobile
robot under the possible occurrence of obstacle shapes.
Abstract: The purpose of this article is to identify the practical strategies of R&D (research and development) entities for developing converging technology in organizational context. Based on the multi-assignation technological domains of patents derived from entire government-supported R&D projects for 13 years, we find that technology convergence is likely to occur when a university solely develops technology or when university develops technology as one of the collaborators. These results reflect the important role of universities in developing converging technology
Abstract: The transformation of vocal characteristics aims at
modifying voice such that the intelligibility of aphonic voice is
increased or the voice characteristics of a speaker (source speaker) to
be perceived as if another speaker (target speaker) had uttered it. In
this paper, the current state-of-the-art voice characteristics
transformation methodology is reviewed. Special emphasis is placed
on voice transformation methodology and issues for improving the
transformed speech quality in intelligibility and naturalness are
discussed. In particular, it is suggested to use the modulation theory
of speech as a base for research on high quality voice transformation.
This approach allows one to separate linguistic, expressive, organic
and perspective information of speech, based on an analysis of how
they are fused when speech is produced. Therefore, this theory
provides the fundamentals not only for manipulating non-linguistic,
extra-/paralinguistic and intra-linguistic variables for voice
transformation, but also for paving the way for easily transposing the
existing voice transformation methods to emotion-related voice
quality transformation and speaking style transformation. From the
perspectives of human speech production and perception, the popular
voice transformation techniques are described and classified them
based on the underlying principles either from the speech production
or perception mechanisms or from both. In addition, the advantages
and limitations of voice transformation techniques and the
experimental manipulation of vocal cues are discussed through
examples from past and present research. Finally, a conclusion and
road map are pointed out for more natural voice transformation
algorithms in the future.
Abstract: This paper explores gender related barriers to interagency collaboration in statutory children safeguard partnerships against a theoretical framework that considers individuals, professions and organisations interacting as part of a complex adaptive system. We argue that gender-framed obstacles to effective communication between culturally discrepant agencies can ultimately impact on the effectiveness of policy delivery,. We focused our research on three partnership structures in Sefton Metropolitan Borough in order to observe how interactions occur, whether the agencies involved perceive their occupational environment as being gender affected and whether they believe this can hinder effective collaboration with other biased organisations. Our principal empirical findings indicate that there is a general awareness amongst professionals of the role that gender plays in each of the agencies reviewed, that gender may well constitute a barrier to effective communication, but there is a sense in which there is little scope for change in the short term. We aim to signal here, however, the need to change against the risk of service failure.
Abstract: The main goal of microarray experiments is to quantify the expression of every object on a slide as precisely as possible, with a further goal of clustering the objects. Recently, many studies have discussed clustering issues involving similar patterns of gene expression. This paper presents an application of fuzzy-type methods for clustering DNA microarray data that can be applied to typical comparisons. Clustering and analyses were performed on microarray and simulated data. The results show that fuzzy-possibility c-means clustering substantially improves the findings obtained by others.
Abstract: This study deals with Computational Fluid Dynamics
(CFD) studies of the interactions between the air flow and louvered
fins which equipped the automotive heat exchangers. 3D numerical
simulation results are obtained by using the ANSYS Fluent 13.0 code
and compared to experimental data. The paper studies the effect of
louver angle and louver pitch geometrical parameters, on overall
thermal hydraulic performances of louvered fins.
The comparison between CFD simulations and experimental data
show that established 3-D CFD model gives a good agreement. The
validation agrees, with about 7% of deviation respectively of friction
and Colburn factors to experimental results. As first, it is found that
the louver angle has a strong influence on the heat transfer rate. Then,
louver angle and louver pitch variation of the louvers and their effects
on thermal hydraulic performances are studied. In addition to this
study, it is shown that the second half of the fin takes has a
significant contribution on pressure drop increase without any
increase in heat transfer.
Abstract: Many experimental results suggest that more precise
spike timing is significant in neural information processing. We
construct a self-organization model using the spatiotemporal patterns,
where Spike-Timing Dependent Plasticity (STDP) tunes the
conduction delays between neurons. We show that the fluctuation of
conduction delays causes globally continuous and locally distributed
firing patterns through the self-organization.
Abstract: Games can be classified as games of skill, games of chance or otherwise be classified as mixed. This paper deals with the topic of scientifically classifying mixed games as more reliant on elements of chance or elements of skill and ways to scientifically measure the amount of skill involved. This is predominantly useful for classification of games as legal or illegal in deferent jurisdictions based on the local gaming laws. We propose a novel measure of skill to chance ratio called the Game Skill Measure (GSM) and utilize it to calculate the skill component of a popular variant of Poker.
Abstract: This paper aims to present the main instruments used
in the economic literature for measuring the price risk, pointing out
on the advantages brought by the conditional variance in this respect.
The theoretical approach will be exemplified by elaborating an
EGARCH model for the price returns of wheat, both on Romanian
and on international market. To our knowledge, no previous
empirical research, either on price risk measurement for the
Romanian markets or studies that use the ARIMA-EGARCH
methodology, have been conducted. After estimating the
corresponding models, the paper will compare the estimated
conditional variance on the two markets.
Abstract: The production of ethyl tert-butyl ether (ETBE) was
simulated through Aspen Plus. The objective of this work was to use
the simulation results to be an alternative platform for ETBE
production from naphtha cracking wastes for the industry to develop.
ETBE is produced from isobutylene which is one of the wastes in
naphtha cracking process. The content of isobutylene in the waste is
less than 30% weight. The main part of this work was to propose a
process to save the environment and to increase the product value by
converting a great majority of the wastes into ETBE. Various
processes were considered to determine the optimal production of
ETBE. The proposed process increased ETBE production yield by
100% from conventional process with the purity of 96% weight. The
results showed a great promise for developing this proposed process
in an industrial scale.
Abstract: This paper addresses the problem of building a unified
structure to describe a peer-to-peer system. Our approach uses the
well-known notations in the P2P area, and provides a global
architecture that puts a separation between the platform specific
characteristics and the logical ones. In order to enable the navigation
of the peer across platforms, a roaming layer is added. The latter
provides a capability to define a unique identification of peer and
assures the mapping between this identification and those used in
each platform. The mapping task is assured by special wrapper. In
addition, ontology is proposed to give a clear presentation of the
structure of the P2P system without interesting in the content and the
resource managed by the peer. The ontology is created according to
the web semantic paradigm and using OWL language; so, the
structure of the system is considered as a web resource.
Abstract: Our study proposes an alternative method in building
Fuzzy Rule-Based System (FRB) from Support Vector Machine
(SVM). The first set of fuzzy IF-THEN rules is obtained through
an equivalence of the SVM decision network and the zero-ordered
Sugeno FRB type of the Adaptive Network Fuzzy Inference System
(ANFIS). The second set of rules is generated by combining the
first set based on strength of firing signals of support vectors using
Gaussian kernel. The final set of rules is then obtained from the
second set through input scatter partitioning. A distinctive advantage
of our method is the guarantee that the number of final fuzzy IFTHEN
rules is not more than the number of support vectors in the
trained SVM. The final FRB system obtained is capable of performing
classification with results comparable to its SVM counterpart, but it
has an advantage over the black-boxed SVM in that it may reveal
human comprehensible patterns.
Abstract: Ontology Matching is a task needed in various applica-tions, for example for comparison or merging purposes. In literature,many algorithms solving the matching problem can be found, butmost of them do not consider instances at all. Mappings are deter-mined by calculating the string-similarity of labels, by recognizinglinguistic word relations (synonyms, subsumptions etc.) or by ana-lyzing the (graph) structure. Due to the facts that instances are oftenmodeled within the ontology and that the set of instances describesthe meaning of the concepts better than their meta information,instances should definitely be incorporated into the matching process.In this paper several novel instance-based matching algorithms arepresented which enhance the quality of matching results obtainedwith common concept-based methods. Different kinds of formalismsare use to classify concepts on account of their instances and finallyto compare the concepts directly.KeywordsInstances, Ontology Matching, Semantic Web
Abstract: This work presents a new phonetic transcription system based on a tree of hierarchical pronunciation rules expressed as context-specific grapheme-phoneme correspondences. The tree is automatically inferred from a phonetic dictionary by incrementally analyzing deeper context levels, eventually representing a minimum set of exhaustive rules that pronounce without errors all the words in the training dictionary and that can be applied to out-of-vocabulary words. The proposed approach improves upon existing rule-tree-based techniques in that it makes use of graphemes, rather than letters, as elementary orthographic units. A new linear algorithm for the segmentation of a word in graphemes is introduced to enable outof- vocabulary grapheme-based phonetic transcription. Exhaustive rule trees provide a canonical representation of the pronunciation rules of a language that can be used not only to pronounce out-of-vocabulary words, but also to analyze and compare the pronunciation rules inferred from different dictionaries. The proposed approach has been implemented in C and tested on Oxford British English and Basic English. Experimental results show that grapheme-based rule trees represent phonetically sound rules and provide better performance than letter-based rule trees.
Abstract: A transient finite element model has been developed
to study the heat transfer and fluid flow during spot Gas Tungsten
Arc Welding (GTAW) on stainless steel. Temperature field, fluid
velocity and electromagnetic fields are computed inside the cathode,
arc-plasma and anode using a unified MHD formulation. The
developed model is then used to study the influence of different
helium-argon gas mixtures on both the energy transferred to the
workpiece and the time evolution of the weld pool dimensions. It is
found that the addition of helium to argon increases the heat flux
density on the weld axis by a factor that can reach 6.5. This induces
an increase in the weld pool depth by a factor of 3. It is also found
that the addition of only 10% of argon to helium decreases
considerably the weld pool depth, which is due to the electrical
conductivity of the mixture that increases significantly when argon is
added to helium.
Abstract: Snake bite cases in Malaysia most often involve the
species Naja-naja and Calloselasma rhodostoma. In keeping with the
need for a rapid snake venom detection kit in a clinical setting, plate
and dot-ELISA test for the venoms of Naja-naja sumatrana,
Calloselasma rhodostoma and the cobra venom fraction V antigen
was developed. Polyclonal antibodies were raised and further used to
prepare the reagents for the dot-ELISA test kit which was tested in
mice, rabbit and virtual human models. The newly developed dot-
ELISA kit was able to detect a minimum venom concentration of
244ng/ml with cross reactivity of one antibody type. The dot-ELISA
system was sensitive and specific for all three snake venom types in
all tested animal models. The lowest minimum venom concentration
detectable was in the rabbit model, 244ng/ml of the cobra venom
fraction V antigen. The highest minimum venom concentration was
in mice, 1953ng/ml against a multitude of venoms. The developed
dot-ELISA system for the detection of three snake venom types was
successful with a sensitivity of 95.8% and specificity of 97.9%.
Abstract: The prevalence of non organic constipation differs
from country to country and the reliability of the estimate rates is
uncertain. Moreover, the clinical relevance of subdividing the
heterogeneous functional constipation disorders into pre-defined
subgroups is largely unknown.. Aim: to estimate the prevalence of
constipation in a population-based sample and determine whether
clinical subgroups can be identified. An age and gender stratified
sample population from 5 Italian cities was evaluated using a
previously validated questionnaire. Data mining by cluster analysis
was used to determine constipation subgroups. Results: 1,500
complete interviews were obtained from 2,083 contacted households
(72%). Self-reported constipation correlated poorly with symptombased
constipation found in 496 subjects (33.1%). Cluster analysis
identified four constipation subgroups which correlated to subgroups
identified according to pre-defined symptom criteria. Significant
differences in socio-demographics and lifestyle were observed
among subgroups.