Abstract: Computer based geostatistical methods can offer effective data analysis possibilities for agricultural areas by using
vectorial data and their objective informations. These methods will help to detect the spatial changes on different locations of the large
agricultural lands, which will lead to effective fertilization for optimal yield with reduced environmental pollution. In this study, topsoil (0-20 cm) and subsoil (20-40 cm) samples were taken from a
sugar beet field by 20 x 20 m grids. Plant samples were also collected
from the same plots. Some physical and chemical analyses for these
samples were made by routine methods. According to derived variation coefficients, topsoil organic matter (OM) distribution was more than subsoil OM distribution. The highest C.V. value of
17.79% was found for topsoil OM. The data were analyzed
comparatively according to kriging methods which are also used
widely in geostatistic. Several interpolation methods (Ordinary,Simple and Universal) and semivariogram models (Spherical,
Exponential and Gaussian) were tested in order to choose the suitable
methods. Average standard deviations of values estimated by simple
kriging interpolation method were less than average standard
deviations (topsoil OM ± 0.48, N ± 0.37, subsoil OM ± 0.18) of measured values. The most suitable interpolation method was simple
kriging method and exponantial semivariogram model for topsoil,
whereas the best optimal interpolation method was simple kriging
method and spherical semivariogram model for subsoil. The results
also showed that these computer based geostatistical methods should
be tested and calibrated for different experimental conditions and semivariogram models.
Abstract: Channel junctions can be analyzed in two ways of
division (lateral intake) and combined flows (confluence). The
present paper investigates 3D flow pattern at lateral intake using
Navier-Stokes equation and κ -ε (RNG) turbulent model. The
equations are solved by Finite-Volume Method (FVM) and results
are compared with the experimental data of (Barkdoll, B.D., 1997)
to test the validity of the findings. Comparison of the results with
the experimental data indicated a close proximity between the two
sets of data which suggest a very close simulation. Results further
indicated an inverse relation between the effects of discharge ratio
( r Q ) on the length and width of the separation zone. In other words,
as the discharge ration increases, the length and width of separation
zone decreases.
Abstract: In this paper, the transformers over-load problem of Shiraz substation in Fars Regional Electric Company (FREC) is investigated for a period of three years plan. So the suggestions for using phase shifting transformer (PST) and unified power flow controller (UPFC) in order to solve this problem are examined in details and finally, some economical and practical designs will be given in order to solve the related problems. Practical consideration and using the basic and fundamental concept of powers in transmission lines in order to find the economical design are the main advantages of this research. The simulation results of the integrated overall system with different designs compare them base on economical and practical aspects to solve the over-load and loss-reduction.
Abstract: The rate of nitrate adsorption by a nitrate selective ion
exchange resin was investigated in a well-stirred batch experiments.
The kinetic experimental data were simulated with diffusion models including external mass transfer, particle diffusion and chemical
adsorption. Particle pore volume diffusion and particle surface diffusion were taken into consideration separately and simultaneously
in the modeling. The model equations were solved numerically using the Crank-Nicholson scheme. An optimization technique was
employed to optimize the model parameters. All nitrate concentration
decay data were well described with the all diffusion models. The
results indicated that the kinetic process is initially controlled by external mass transfer and then by particle diffusion. The external
mass transfer coefficient and the coefficients of pore volume diffusion and surface diffusion in all experiments were close to each
other with the average value of 8.3×10-3 cm/S for external mass
transfer coefficient. In addition, the models are more sensitive to the
mass transfer coefficient in comparison with particle diffusion. Moreover, it seems that surface diffusion is the dominant particle
diffusion in comparison with pore volume diffusion.
Abstract: Mobile payments have been deployed by businesses for more than a decade. Customers use mobile payments if they trust in this relatively new payment method, have a belief and confidence in, as well as reliance on its services and applications. Despite its potential, the current literature shows that there is lack of customer trust in B2C mobile payments, and a lack of studies that determine the factors that influence their trust in these payments; which make these factors yet to be understood, especially in the Middle East region. Thus, this study aims to explore the factors that influence customer trust in mobile payments. The empirical data for this explorative study was collected by establishing four focus group sessions in the UAE. The results indicate that the explored significant factors can be classified into five main groups: customer characteristics, environmental (social and cultural) influences, provider characteristics, mobile-device characteristics, and perceived risks.
Abstract: In synchronized games players make their moves simultaneously
rather than alternately. Synchronized Quadromineering is
the synchronized version of Quadromineering, a variants of a classical
two-player combinatorial game called Domineering. Experimental
results for small m × n boards (with m + n < 15) and some
theoretical results for general k × n boards (with k = 4, 5, 6) are
presented. Moreover, some Synchronized Quadromineering variants
are also investigated.
Abstract: Wireless sensor networks is an emerging technology
that serves as environment monitors in many applications. Yet
these miniatures suffer from constrained resources in terms of
computation capabilities and energy resources. Limited energy
resource in these nodes demands an efficient consumption of that
resource either by developing the modules itself or by providing
an efficient communication protocols. This paper presents a
comprehensive summarization and a comparative study of the
available MAC protocols proposed for Wireless Sensor Networks
showing their capabilities and efficiency in terms of energy
consumption and delay guarantee.
Abstract: The study aimed to investigate the effect of rice types on chewing behaviours (chewing time, number of chews, and portion size) and bolus properties (bolus moisture content, solid loss, and particle size distribution (PSD)) in human subjects. Five cooked rice types including brown rice (BR), white rice (WR), parboiled white rice (PR), high amylose white rice (HR) and waxy white rice (WXR) were chewed by six subjects. The chewing behaviours were recorded and the food boluses were collected during mastication. Rice typeswere found to significantly influence all chewing parameters evaluated. The WXR and BR showed the most pronounced differences compared with other rice types. The initial moisture content of un-chewed WXR was lowest (43.39%) whereas those of other rice types were ranged from 66.86 to 70.33%. The bolus obtained from chewing the WXR contained lowest moisture content (56.43%) whilst its solid loss (22.03%) was not significant different from those of all rice types. In PSD evaluation using Mastersizer S, the diameter of particles measured was ranged between 4 to 3500 μm. The particle size of food bolus from BR, HR, and WXR contained much finer particles than those of WR and PR.
Abstract: The environmental impact caused by industries is an issue that, in the last 20 years, has become very important in terms of society, economics and politics in Colombia. Particularly, the tannery process is extremely polluting because of uneffective treatments and regulations given to the dumping process and atmospheric emissions. Considering that, this investigation is intended to propose a management model based on the integration of Lean Supply Chain, Green Supply Chain, Cleaner Production and ISO 14001-2004, that prioritizes the strategic components of the organizations. As a result, a management model will be obtained and it will provide a strategic perspective through a systemic approach to the tanning process. This will be achieved through the use of Multicriteria Decision tools, along with Quality Function Deployment and Fuzzy Logic. The strategic approach that embraces the management model using the alignment of Lean Supply Chain, Green Supply Chain, Cleaner Production and ISO 14001-2004, is an integrated perspective that allows a gradual frame of the tactical and operative elements through the correct setting of the information flow, improving the decision making process. In that way, Small Medium Enterprises (SMEs) could improve their productivity, competitiveness and as an added value, the minimization of the environmental impact. This improvement is expected to be controlled through a Dashboard that helps the Organization measure its performance along the implementation of the model in its productive process.
Abstract: The value of emission factor was calculated in the
older type of Diesel engine operating on an engine testing bench and
then compared with the parameters monitored under similar
conditions when the EnviroxTM additive was applied. It has been
found out that the additive based on CeO2 nanoparticles reduces
emission of NOx. The dependencies of NOx emissions on reduced
torque, engine power and revolutions have been observed as well.
Abstract: This paper proposes fractal patterns for power quality
(PQ) detection using color relational analysis (CRA) based classifier.
Iterated function system (IFS) uses the non-linear interpolation in the
map and uses similarity maps to construct various fractal patterns of
power quality disturbances, including harmonics, voltage sag, voltage
swell, voltage sag involving harmonics, voltage swell involving
harmonics, and voltage interruption. The non-linear interpolation
functions (NIFs) with fractal dimension (FD) make fractal patterns
more distinguishing between normal and abnormal voltage signals.
The classifier based on CRA discriminates the disturbance events in a
power system. Compared with the wavelet neural networks, the test
results will show accurate discrimination, good robustness, and faster
processing time for detecting disturbing events.
Abstract: Environmental responsibility includes improvement of environmental performance in order to reduce environmental impact. This paper gives a short review of some important environmental objectives, targets and actions that modern shipping company should follow.
Abstract: In this paper is to evaluate audio and speech quality
with the help of Digital Audio Watermarking Technique under the
different types of attacks (signal impairments) like Gaussian Noise,
Compression Error and Jittering Effect. Further attacks are
considered as Hostile Environment. Audio and Speech Quality
Evaluation is an important research topic. The traditional way for
speech quality evaluation is using subjective tests. They are reliable,
but very expensive, time consuming, and cannot be used in certain
applications such as online monitoring. Objective models, based on
human perception, were developed to predict the results of subjective
tests. The existing objective methods require either the original
speech or complicated computation model, which makes some
applications of quality evaluation impossible.
Abstract: While computers are known to facilitate lower levels of learning, such as rote memorization of facts, measurable through electronically administered and graded multiple-choice questions, yes/no, and true/false answers, the imparting and measurement of higher-level cognitive skills is more vexing. These require more open-ended delivery and answers, and may be more problematic in an entirely virtual environment, notwithstanding the advances in technologies such as wikis, blogs, discussion boards, etc. As with the integration of all technology, merit is based more on the instructional design of the course than on the technology employed in, and of, itself. With this in mind, this study examined the perceptions of online students in an introductory Computer Information Systems course regarding the fostering of various higher-order thinking and team-building skills as a result of the activities, resources and technologies (ART) used in the course.
Abstract: Elastic and inelastic scattering of α-particles by 9Be nuclei at different incident energies have been analyzed. Optical model parameters (OMPs) of α-particles elastic scattering by 9Be at different energies have been obtained. Coupled Reaction Channel (CRC) of elastic scattering, inelastic scattering and transfer reaction has been calculated using Fresco Code. The effect of involving CRC calculations on the analysis of differential cross section has been studied. The transfer reaction of (5He) in the reaction 9Be(α,9Be)α has been studied. The spectroscopic factor of 9Be≡α+5He has been extracted.
Abstract: In this paper, we consider the problem of Popular Matching of strictly ordered preference lists. A Popular Matching is not guaranteed to exist in any network. We propose an IDbased, constant space, self-stabilizing algorithm that converges to a Maximum Popular Matching an optimum solution, if one exist. We show that the algorithm stabilizes in O(n5) moves under any scheduler (daemon).
Abstract: This paper examines the students’ self-concept among 16- and 17- year- old adolescents in Malaysian secondary schools. Previous studies have shown that positive self-concept played an important role in student adjustment and academic performance during schooling. This study attempts to investigate the factors influencing students’ perceptions toward their own self-concept. A total of 1168 students participated in the survey. This study utilized the CoPs (UM) instrument to measure self-concept. Principal Component Analysis (PCA) revealed three factors: academic selfconcept, physical self-concept and social self-concept. This study confirmed that students perceived certain internal context factors, and revealed that external context factor also have an impact on their self-concept.
Abstract: This paper presents a novel method for prediction of
the mechanical behavior of proximal femur using the general
framework of the quantitative computed tomography (QCT)-based
finite element Analysis (FEA). A systematic imaging and modeling
procedure was developed for reliable correspondence between the
QCT-based FEA and the in-vitro mechanical testing. A speciallydesigned
holding frame was used to define and maintain a unique
geometrical reference system during the analysis and testing. The
QCT images were directly converted into voxel-based 3D finite
element models for linear and nonlinear analyses. The equivalent
plastic strain and the strain energy density measures were used to
identify the critical elements and predict the failure patterns. The
samples were destructively tested using a specially-designed gripping
fixture (with five degrees of freedom) mounted within a universal
mechanical testing machine. Very good agreements were found
between the experimental and the predicted failure patterns and the
associated load levels.
Abstract: Cogeneration may be defined as a system which
contains electricity production and regain of the thermo value of
exhaust gases simultaneously. The examination is based on the data-s
of an active cogeneration plant. This study, it is aimed to determine
which component of the system should be revised first to raise the
efficiency and decrease the loss of exergy. For this purpose, second
law analysis of thermodynamics is applied to each component due to
consider the effects of environmental conditions and take the quality
of energy into consideration as well as the quantity of it. The exergy
balance equations are produced and exergy loss is calculated for each
component. 44,44 % loss of exergy in heat exchanger, 29,59 % in
combustion chamber, 18,68 % in steam boiler, 5,25 % in gas turbine
and 2,03 % in compressor is calculated.
Abstract: Gilaburu (Viburnum opulus L.) grown naturally in
Anatolia. In this study, some physico-chemical (sugar, acid, protein,
crude fat, crude fiber, ash etc.) characteristics and mineral
composition of Gilaburu fruit have been investigated. The length,
width, thickness, weight, total soluble solid, protein, crude ash, crude
fiber and crude oil of fruit were found to be 1.12 cm, 1.58 cm, 1.87
cm, 0.87 g, 14.73 %, 0.2 %, 0.11 %, 6.56 % and 0.4 %, respectively.
The seed of fruit mean weight, length, width and thickness were
determinated as 0.08 g, 7.76 cm, 7.67 cm and 1.66, respectively. In
addition 27 mineral elements (Al, Mg, Na, Ba, Ca, Ni, Cd, P, Cr, Pb,
S, Cu, Se, Fe, K, Sr, Li, Z, V, Ag, Bi, Co, Mn, B, Ga, In, Ti) were
analyzed. Gilaburu (Viburnum opulus L.) fruit was richest in
potassium (10764.764 ppm), Mg (1289.088 ppm) and P (1304.169
ppm).