Abstract: Robotics provides answers to amputees. The most
expensive solutions surgically connect the prosthesis to nerve endings.
There are also several types of non-invasive technologies that recover
nerve messages passing through the muscles. After analyzing these
messages, myoelectric prostheses perform the desired movement.
The main goal is to avoid all surgeries, which can be heavy and offer
cheaper alternatives. For an amputee, we use valid muscles to recover
the electrical signal involved in a muscle movement. EMG sensors
placed on the muscle allows us to measure a potential difference,
which our program transforms into control for a robotic arm with two
degrees of freedom. We have shown the feasibility of non-invasive
prostheses with two degrees of freedom. Signal analysis and an
increase in degrees of freedom is still being improved.
Abstract: This paper presents reliability indices evaluation of the
rotor core magnetization of the induction motor operated as a self
excited induction generator by using probability distribution approach
and Monte Carlo simulation. Parallel capacitors with calculated
minimum capacitive value across the terminals of the induction motor
operated as a SEIG with unregulated shaft speed have been connected
during the experimental study. A three phase, 4 poles, 50Hz, 5.5 hp,
12.3A, 230V induction motor coupled with DC Shunt Motor was
tested in the electrical machine laboratory with variable reactive loads.
Based on this experimental study, it is possible to choose a reliable
induction machines operated as a SEIG for unregulated renewable
energy application in remote area or where grid is not available.
Failure density function, cumulative failure distribution function,
survivor function, hazard model, probability of success and
probability of failure for reliability evaluation of the three phase
induction motor operating as a SEIG have been presented graphically
in this paper.
Abstract: Cement-based grouts has been used successfully to
repair cracks in many concrete structures such as bridges, tunnels,
buildings and to consolidate soils or rock foundations. In the present
study the rheological characterization of cement grout with
water/binder ratio (W/B) is fixed at 0.5. The effect of the replacement
of cement by bentonite (2 to 10% wt) in presence of superplasticizer
(0.5% wt) was investigated. Several rheological tests were carried out
by using controlled-stress rheometer equipped with vane geometry in
temperature of 20°C. To highlight the influence of bentonite and
superplasticizer on the rheological behavior of grout cement, various
flow tests in a range of shear rate from 0 to 200 s-1 were observed.
Cement grout showed a non-Newtonian viscosity behavior at all
concentrations of bentonite. Three parameter model Herschel-
Bulkley was chosen for fitting of experimental data. Based on the
values of correlation coefficients of the estimated parameters, The
Herschel-Bulkley law model well described the rheological behavior
of the grouts. Test results showed that the dosage of bentonite
increases the viscosity and yield stress of the system and introduces
more thixotropy. While the addition of both bentonite and
superplasticizer with cement grout improve significantly the fluidity
and reduced the yield stress due to the action of dispersion of SP.
Abstract: Nations are still finding it quite difficult to win mega
sport competitions despite the major contribution of sport to society
in terms of social and economic development, personal health, and in
education. Even though the world of sports has been transformed into
a huge global economy, it is important to note that the first step of
sport is usually its introduction to children at school through physical
education or PE. In other words, nations who do not win mega sport
competitions also suffer from a weak and neglected PE system. This
problem of the neglect of PE systems is the main motivation of this
research aimed at examining the factors affecting the perceived
awareness of physical education teachers on the ICTs that are
adoptable for the teaching and learning of physical education. Two
types of research objectives will materialize this aim: relevant
theories will be identified in relation to the analysis of the perceived
ICT awareness of PE teachers and subsequent models will be
compiled and designed from existing literature; the empirical testing
of such theories and models will also be achieved through the survey
of PE teachers from the Camperdown magisterial district of the
KwaZulu-Natal province of South Africa. The main hypothesis at the
heart of this study is the relationship between the demographics of PE
teachers, their behavior both as individuals and as social entities, and
their perceived awareness of the ICTs that are adoptable for PE, as
postulated by existing literature; except that this study categorizes
human behavior under performance expectancy, computer attitude,
and social influence. This hypothesis was partially confirmed by the
survey conducted by this research in the sense that performance
expectancy and teachers’ age, gender, computer usage, and class size
were found to be the only factors affecting their awareness of ICTs
for physical education.
Abstract: In order to study the effect of drought stress on grain
yield, yield components and associated traits of durum wheat
cultivars, an experiment was done as split plot arrangement using
randomized complete block design with three replications in Ilam
province, Iran in 2009-2010 cropping season. Different levels of
irrigation (Full irrigation, drought stress at stem elongation,
Flowering and grain formation stages) were considered as a main plot
and three durum wheat cultivars (Yavaros, Seimareh and Karkheh)
were assigned as a sub plot. The results showed that drought stress
was significant on grain yield, spike.m-2, grain. Spike-1, 1000-grain
weight, biological yield, harvest index and protein content. Drought
stress at all stages caused a loss in grain yield and its components.
Full irrigation had the highest grain yield and yield components.
Drought stress at stem elongation, flowering and grain formation
stages caused a reduction in spike.m-2, grain.spike-1 and 1000-grain
weight, respectively. Protein content was significantly affected by
drought stress. The highest protein content was obtained from
drought stress at grain formation stage. Cultivars had an influence on
grain yield and yield components. Yavaros and Seimareh cultivars
had the highest and lowest grain yield, respectively. Interaction effect
between drought stress and cultivar had a significant effect on grain
and yield components. Full irrigation and Yavaros cultivar had the
highest grain yield and drought stress at grain formation stage and
Seimareh cultivar had the lowest grain yield, respectively.
Abstract: The development of the agricultural sector in Ghana
has been reliant on the use of irrigation systems to ensure food
security. However, the manual operation of these systems has not
facilitated their maximum efficiency due to human limitations.
This paper seeks to address this problem by designing and
implementing an efficient, cost effective automated system which
monitors and controls the water flow of irrigation through
communication with an authorized operator via text messages. The
automatic control component of the system is timer based with an
Atmega32 microcontroller and a real time clock from the SM5100B
cellular module. For monitoring purposes, the system sends periodic
notification of the system on the performance of duty via SMS to the
authorized person(s). Moreover, the GSM based Irrigation
Monitoring and Control System saves time and labour and reduces
cost of operating irrigation systems by saving electricity usage and
conserving water.
Field tests conducted have proven its operational efficiency and
ease of assessment of farm irrigation equipment due to its costeffectiveness
and data logging capabilities.
Abstract: Different services based on different switching
techniques in wireless networks leads to drastic changes in the
properties of network traffic. Because of these diversities in services,
network traffic is expected to undergo qualitative and quantitative
variations. Hence, assumption of traffic characteristics and the
prediction of network events become more complex for the wireless
networks. In this paper, the traffic characteristics have been studied
by collecting traces from the mobile switching centre (MSC). The
traces include initiation and termination time, originating node, home
station id, foreign station id. Traffic parameters namely, call interarrival
and holding times were estimated statistically. The results
show that call inter-arrival and distribution time in this wireless
network is heavy-tailed and follow gamma distributions. They are
asymptotically long-range dependent. It is also found that the call
holding times are best fitted with lognormal distribution. Based on
these observations, an analytical model for performance estimation is
also proposed.
Abstract: Renewable energy is derived from natural processes
that are replenished constantly. Included in the definition is
electricity and heat generated from solar, wind, ocean, hydropower,
biomass, geothermal resources, and bio-fuels and hydrogen derived
from renewable resources. Each of these sources has unique
characteristics which influence how and where they are used. This
paper presents the modeling the simulation of solar and hydro hybrid
energy sources in MATLAB/SIMULINK environment. It simulates
all quantities of Hybrid Electrical Power system (HEPS) such as AC
output current of the inverter that injected to the load/grid, load
current, grid current. It also simulates power output from PV and
Hydraulic Turbine Generator (HTG), power delivered to or from grid
and finally power factor of the inverter for PV, HTG and grid. The
proposed circuit uses instantaneous p-q (real-imaginary) power
theory.
Abstract: With advances in solid-state power electronic devices
and microprocessors, various pulse-width-modulation (PWM)
techniques have been developed for industrial applications. This
paper presents the comparison of two different PWM techniques, the
sinusoidal PWM (SPWM) technique and the space-vector PWM
(SVPWM) technique applied to two level VSI for micro grid
applications. These two methods are compared by discussing their
ease of implementation and by analyzing the output harmonic spectra
of various output voltages (line-to-neutral voltages, and line-to-line
voltages) and their total harmonic distortion (THD). The SVPWM
technique in the under-modulation region can increase the
fundamental output voltage by 15.5% over the SPWM technique.
Abstract: The current study explored the effect of economic
development, financial development and institutional quality on
environmental destruction in upper-middle income countries during
the time period of 1999-2011. The dependent variable is logarithm of
carbon dioxide emissions that can be considered as an index for
destruction or quality of the environment given to its effects on the
environment. Financial development and institutional development
variables as well as some control variables were considered. In order
to study cross-sectional correlation among the countries under study,
Pesaran and Friz test was used. Since the results of both tests show
cross-sectional correlation in the countries under study, seemingly
unrelated regression method was utilized for model estimation. The
results disclosed that Kuznets’ environmental curve hypothesis is
confirmed in upper-middle income countries and also, financial
development and institutional quality have a significant effect on
environmental quality. The results of this study can be considered by
policy makers in countries with different income groups to have
access to a growth accompanied by improved environmental quality.
Abstract: Microarray technology is universally used in the study
of disease diagnosis using gene expression levels. The main
shortcoming of gene expression data is that it includes thousands of
genes and a small number of samples. Abundant methods and
techniques have been proposed for tumor classification using
microarray gene expression data. Feature or gene selection methods
can be used to mine the genes that directly involve in the
classification and to eliminate irrelevant genes. In this paper
statistical measures like T-Statistics, Signal-to-Noise Ratio (SNR)
and F-Statistics are used to rank the genes. The ranked genes are used
for further classification. Particle Swarm Optimization (PSO)
algorithm and Shuffled Frog Leaping (SFL) algorithm are used to
find the significant genes from the top-m ranked genes. The Naïve
Bayes Classifier (NBC) is used to classify the samples based on the
significant genes. The proposed work is applied on Lung and Ovarian
datasets. The experimental results show that the proposed method
achieves 100% accuracy in all the three datasets and the results are
compared with previous works.
Abstract: Since, today in most countries around the world much
attention is paid to planning the smallest unit in the city i.e. the
residential neighborhoods to achieve sustainable urban development
goals, a variety of assessment tools have been developed to assess
and monitor the sustainability of new developments. One of the most
reliable and widely used assessment tools is LEED-ND rating system.
This paper whit the aim of assessing sustainability level of Roshdieh
neighborhood in Tabriz, has introduced this rating system and applied
it in the study area. The results indicate that Roshdieh has the
potential of achieving the standards of sustainable neighborhoods, but
the present situation is far from the ideal point.
Abstract: Since the emergence of e-Commerce, the world of
business has witnessed a radical shift in the way business activities
are conducted. However, the emergence of m-Commerce has further
pushed the boundaries of virtual commerce revolution. As a result,
there seems to be a growing blur in the distinction between e-
Commerce and m-Commerce. In addition, existing definitions for
both forms of commerce highlight characteristics (e.g. type of device
and activity conducted) that may be applicable to both concepts. The
aim of this paper is to identify the characteristics that help define and
delineate between e- and m- Commerce. The paper concludes that
characteristics of mobility, ubiquity and immediacy provide a clearer
and simpler template to distinguish between e-Commerce and m-
Commerce.
Abstract: It’s an era of high competition, dynamism and
complexities which have forced organizations to change dramatically
due to rising customer expectations. Marketers are under constant
pressure to deliver finest to their customers. With the advent of
technology, marketers have identified latest advertising media
options to reach out to target audience. But the conventional ways of
print advertisements still holds a deeper penetration and coverage.
Various researchers and practitioners have studied the area of print
media advertising and have tried to identify and implement
advertisement effectiveness enablers. The purpose of this paper is to
suggest select enablers for print media in Indian context using an
integrated approach of review of literature and investigative
interviews with academicians and experts from the area of
advertising.
Abstract: Due to the advancement of Internet technology, online
learning is widely used in higher education institutions. Online
learning offers several means of communication, including online
forum. Through online forum, students and instructors are able to
discuss and share their knowledge and expertise without having a
need to attend the face-to-face, ordinary classroom session. The
purposes of this study are to analyze the students’ levels of
participation and critical thinking, types of action and factors
influencing their participation in online forum. A total of 41
postgraduate students undertaking a course in educational technology
from a public university in Malaysia were involved in this study. In
this course, the students participated in a weekly online forum as part
of the course requirement. Based on the log data file extracted from
the online forum, the students’ type of actions (view, add, update,
delete posts) and their levels of participation (passive, moderate or
active) were identified. In addition, the messages posted in the forum
were analyzed to gauge their level of critical thinking. Meanwhile,
the factors that might influence their online forum participation were
measured using a 24-items questionnaire. Based on the log data, a
total of 105 posts were sent by the participants. In addition, the
findings show that (i) majority of the students are moderate
participants, with an average of two to three posts per person, (ii)
viewing posts are the most frequent type of action (85.1%), and
followed by adding post (9.7%). Furthermore, based on the posts
they made, the most frequent type of critical thinking observed was
justification (50 input or 19.0%), followed by linking ideas and
interpretation (47 input or 18%), and novelty (38 input or 14.4%).
The findings indicate that online forum allows for social interaction
and can be used to measure the students’ critical thinking skills. In
order to achieve this, monitoring students’ activities in the online
forum is recommended.
Abstract: Students’ achievement and motivation in learning
English in Malaysia is a worrying trend as it is lagging behind several
other countries in Asia. Thus, necessary actions have to be taken by
the parties concerned to overcome this problem. The purpose of this
research was to study the effects of drill and practice courseware on
students’ achievement and motivation in learning English language.
A multimedia courseware was developed for this purpose. The
independent variable was the drill and practice courseware while the
dependent variables were the students’ achievement and motivation.
Their achievement was measured using pre-test and post-test scores,
while motivation was measured using a questionnaire. A total of 60
students from three vernacular primary schools in a northern state in
Malaysia were randomly selected in this study. The findings indicate:
(1) a significant difference between the students’ pre-test and posttest
scores after using the courseware, (2) no significant difference in
the achievement score between male and female students after using
the courseware, (3) a significant difference in motivation score
between the female and the male students, and (4) while the female
students scored significantly higher than the male students in the
aspects of relevance, confidence and satisfaction, no significant
difference in terms of attention was observed between them. Overall,
the findings clearly indicate that although the female students are
significantly more motivated than their male students, they are
equally good in terms of achievement after learning from the
courseware. Through this study, the drill and practice courseware is
proven to influence the students’ learning and motivation.
Abstract: The asynchronous discussion forum is one of the most
widely used activities in learning management system environment.
Online forum allows participants to interact, construct knowledge,
and can be used to complement face to face sessions in blended
learning courses. However, to what extent do the students perceive
the benefits or advantages of forum remain to be seen. Through
content and social network analyses, instructors will be able to gauge
the students’ engagement and knowledge construction level. Thus,
this study aims to analyze the students’ level of knowledge
construction and their participation level that occur through online
discussion. It also attempts to investigate the relationship between the
level of knowledge construction and their social interaction patterns.
The sample involves 23 students undertaking a master course in one
public university in Malaysia. The asynchronous discussion forum
was conducted for three weeks as part of the course requirement. The
finding indicates that the level of knowledge construction is quite
low. Also, the density value of 0.11 indicating the overall
communication among the participants in the forum is low. This
study reveals that strong and significant correlations between SNA
measures (in-degree centrality, out-degree centrality) and level of
knowledge construction. Thus, allocating these active students in
different group aids the interactive discussion takes place. Finally,
based upon the findings, some recommendations to increase students’
level of knowledge construction and also for further research are
proposed.
Abstract: Lately, asynchronous discussion forum is integrated in
higher educational institutions as it may increase learning process,
learners’ understanding, achievement and knowledge construction.
The asynchronous discussion forum is used to complement the
traditional, face-to-face learning session in hybrid learning courses.
However, studies have proven that students’ engagement in online
forums is still unconvincing. Thus, the aim of this study is to
investigate the motivating factors and obstacles that affect the
learners’ engagement in asynchronous discussion forum. This study
is carried out in one of the public higher educational institutions in
Malaysia with 18 postgraduate students as samples. The authors have
developed a 40-items questionnaire based on literature review. The
results indicate several factors that have encouraged or limited
students’ engagement in asynchronous discussion forum: (a) the
practices or behaviors of peers, or instructors, (b) the needs for the
discussions, (c) the learners’ personalities, (d) constraints in
continuing the discussion forum, (e) lack of ideas, (f) the level of
thoughts, (g) the level of knowledge construction, (h) technical
problems, (i) time constraints and (j) misunderstanding. This study
suggests some recommendations to increase the students’
engagement in online forums. Finally, based upon the findings, some
implications are proposed for further research.
Abstract: The sub-task pattern in terms of deviations and defects
should be identified and understood in order to improve the quality of
practices in construction projects. Therefore, sub-task susceptibility
to exposure to deviations and defects has been evaluated and
classified via six classifications proposed in this study. Thirty-four
case studies of specific sub-tasks (from compression members in
constructed concrete structures) were collected from seven
construction projects in order to examine the study’s proposed
classifications. The study revealed that the sub-task has a high
sensitivity to deviation, where 91% of the cases were recorded as
deviations; however, only 19% of cases were recorded as defects.
Other findings were that the actual work during the execution process
is a high source of deviation for this sub-task (74%), while only 26%
of the source of deviation was due to both design documentation and
the actual work. These findings significantly imply that the study’s
proposed classifications could be used to determine the pattern of
each sub-task and develop proactive actions to overcome issues of
sub-task deviations and defects.
Abstract: Off-site construction methods have played an
important role in the construction sector in the past few decades. It is
increasingly becoming a major alternative technique and strategic
direction compared to traditional in-situ method. It produces a
significant amount of value for the construction industry and the
economy more generally. To date, an impressive number of studies
have been lunched on the perceived perception of off-site
construction. However, it seems that a quantifying benefit on the
offsite construction area is lacking. Therefore, this paper examines
the recent research literature on the benefits of off- site construction
and provides future direction. In the beginning, this paper provides a
brief history and current value of the off-site construction followed
by a detailed discussion on the benefit of off-site construction. These
benefits include but not limited to time saving, quality improvement,
relieving skills shortages, cost reduction and productivity
improvement. Toward this end, off-site construction should learn
from other productive industry similar to services or manufacturing
industry by applying operational management tools and techniques
with extensive focus on employee empowerment will shed the light
on future uptake of Off-site construction. This study is of value in
providing scholars have a clear picture of perceived benefit of off-site
construction research and give an opportunities for future uptake of
off-site method.