Abstract: Applied a mouse-s roller with a gripper to increase the
efficiency for a gripper can learn to a material handling without
slipping. To apply a gripper, we use the optimize principle to develop
material handling by use a signal for checking a roller mouse that
rotate or not. In case of the roller rotates means that the material slips.
A gripper will slide to material handling until the roller will not
rotate. As this experiment has test material handling for comparing a
grip force that uses to material handling of the 10-human with the
applied gripper. We can summarize that human exert the material
handling more than the applied gripper. Because of the gripper can
exert more befit to material handling than human and may be a
minimum force to lift a material without slipping.
Abstract: The eco-efficient use of “waste" makes sense from
economic, social, and environmental perspectives. By efficiency diverting “waste" products back into useful and/or profitable inputs,
industries and entire societies can reap the benefits of improved financial profit, decreased environmental degradation, and overall
well-being of humanity.
In this project, several material flows at
Company Limited were investigated. Principles of "industrial ecology" were applied to improve the management of waste rubbers that are used in the jewelry manufacturing process. complete this project, a brief engineering analysis stream, and investigated eco-efficient principles for more efficient
handling of the materials and wastes were conducted, and the result were used to propose implementation strategies.
Abstract: Describes the current situation of educational Robotics
"the State of the art" its concept, its evolution their niches of
opportunity, academic and business and the importance of education
and academic outreach. It shows that the development of high-tech
automated educational materials influence the teaching-learning
process and that communication between machines and humans is a
reality.
Abstract: Although face recognition seems as an easy task for
human, automatic face recognition is a much more challenging task
due to variations in time, illumination and pose. In this paper, the
influence of time-lapse on visible and thermal images is examined.
Orthogonal moment invariants are used as a feature extractor to
analyze the effect of time-lapse on thermal and visible images and the
results are compared with conventional Principal Component
Analysis (PCA). A new triangle square ratio criterion is employed
instead of Euclidean distance to enhance the performance of nearest
neighbor classifier. The results of this study indicate that the ideal
feature vectors can be represented with high discrimination power
due to the global characteristic of orthogonal moment invariants.
Moreover, the effect of time-lapse has been decreasing and enhancing
the accuracy of face recognition considerably in comparison with
PCA. Furthermore, our experimental results based on moment
invariant and triangle square ratio criterion show that the proposed
approach achieves on average 13.6% higher in recognition rate than
PCA.
Abstract: The introduction of sowing technologies into minimum- or no-tillage soil has a number of economical and environmental virtues, such as improving soil properties, decreasing soil erosion and degradation, and saving working time and fuel. However, the main disadvantage of these technologies is that plant residues on the soil surface reduce the quality of the planted crop seeds, thus requiring plant residues to be removed or cut. This paper presents a analysis of disc coulter parameters and an experimental investigation of cutting spring barley straw containing various amounts of moisture with different disc coulters (smooth and notched).
Abstract: The impact of noise upon live quality has become an
important aspect to make both urban and environmental policythroughout
Europe and in Turkey. Concern over the quality of urban
environments, including noise levels and declining quality of green
space, is over the past decade with increasing emphasis on designing
livable and sustainable communities. According to the World Health
Organization, noise pollution is the third most hazardous
environmental type of pollution which proceeded by only air (gas
emission) and water pollution. The research carried out in two
phases, the first stage of the research noise and plant types providing
the suction of noise was evaluated through literature study and at the
second stage, definite types (Juniperus horizontalis L., Spirea
vanhouetti Briot., Cotoneaster dammerii C.K., Berberis thunbergii
D.C., Pyracantha coccinea M. etc.) were selected for the city of
Konya. Trials were conducted on the highway of Konya. The biggest
value of noise reduction was 6.3 dB(A), 4.9 dB(A), 6.2 dB(A) value
with compared to the control which includes the group that formed
by the bushes at the distance of 7m, 11m, 20m from the source and
5m, 9m, 20m of plant width, respectively. In this paper, definitions
regarding to noise and its sources were made and the precautions
were taken against to noise that mentioned earlier with the adverse
effects of noise. Plantation design approaches and suggestions
concerning to the diversity to be used, which are peculiar to roadside,
were developed to discuss the role and the function of plant material
to reduce the noise of the traffic.
Abstract: With increasing complexity in electronic systems
there is a need for system level anomaly detection and fault isolation.
Anomaly detection based on vector similarity to a training set is used
in this paper through two approaches, one the preserves the original
information, Mahalanobis Distance (MD), and the other that
compresses the data into its principal components, Projection Pursuit
Analysis. These methods have been used to detect deviations in
system performance from normal operation and for critical parameter
isolation in multivariate environments. The study evaluates the
detection capability of each approach on a set of test data with known
faults against a baseline set of data representative of such “healthy"
systems.
Abstract: Electro Chemical Discharge Machining (ECDM) is an
emerging hybrid machining process used in precision machining of hard and brittle non-conducting materials. The present paper gives a
critical review on materials machined by ECDM under the prevailing machining conditions; capability indicators of the process are
reported. Some results obtained while performing experiments in micro-channeling on soda lime glass using ECDM are also presented. In these experiments, Tool Wear (TW) and Material Removal (MR)
were studied using design of experiments and L–4 orthogonal array. Experimental results showed that the applied voltage was the most influencing parameter in both MR and TW studies. Field
emission scanning electron microscopy (FESEM) results obtained on the microchannels confirmed the presence of micro-cracks, primarily responsible for MR. Chemical etching was also seen along the edges.
The Energy dispersive spectroscopy (EDS) results were used to detect the elements present in the debris and specimens.
Abstract: Dengue fever is prevalent in Malaysia with numerous
cases including mortality recorded over the years. Public education
on the prevention of the desease through various means has been
carried out besides the enforcement of legal means to eradicate
Aedes mosquitoes, the dengue vector breeding ground. Hence, other
means need to be explored, such as predicting the seasonal peak
period of the dengue outbreak and identifying related climate factors
contributing to the increase in the number of mosquitoes. Simulation
model can be employed for this purpose. In this study, we created a
simulation of system dynamic to predict the spread of dengue
outbreak in Hulu Langat, Selangor Malaysia. The prototype was
developed using STELLA 9.1.2 software. The main data input are
rainfall, temperature and denggue cases. Data analysis from the graph
showed that denggue cases can be predicted accurately using these
two main variables- rainfall and temperature. However, the model
will be further tested over a longer time period to ensure its
accuracy, reliability and efficiency as a prediction tool for dengue
outbreak.
Abstract: The two-phase flow field and the motion of the free
surface in an oscillating channel are simulated numerically to assess
the methodology for simulating nuclear reacotr thermal hydraulics
under seismic conditions. Two numerical methods are compared: one
is to model the oscillating channel directly using the moving grid of
the Arbitrary Lagrangian-Eulerian method, and the other is to simulate
the effect of channel motion using the oscillating acceleration acting
on the fluid in the stationary channel. The two-phase flow field in the
oscillating channel is simulated using the level set method in both
cases. The calculated results using the oscillating acceleration are
found to coinside with those using the moving grid, and the theoretical
back ground and the limitation of oscillating acceleration are discussed.
It is shown that the change in the interfacial area between liquid and
gas phases under seismic conditions is important for nuclear reactor
thermal hydraulics.
Abstract: In this paper we use exponential particle swarm
optimization (EPSO) to cluster data. Then we compare between
(EPSO) clustering algorithm which depends on exponential variation
for the inertia weight and particle swarm optimization (PSO)
clustering algorithm which depends on linear inertia weight. This
comparison is evaluated on five data sets. The experimental results
show that EPSO clustering algorithm increases the possibility to find
the optimal positions as it decrease the number of failure. Also show
that (EPSO) clustering algorithm has a smaller quantization error
than (PSO) clustering algorithm, i.e. (EPSO) clustering algorithm
more accurate than (PSO) clustering algorithm.
Abstract: An automatic speech recognition system for the
formal Arabic language is needed. The Quran is the most formal
spoken book in Arabic, it is spoken all over the world. In this
research, an automatic speech recognizer for Quranic based speakerindependent
was developed and tested. The system was developed
based on the tri-phone Hidden Markov Model and Maximum
Likelihood Linear Regression (MLLR). The MLLR computes a set
of transformations which reduces the mismatch between an initial
model set and the adaptation data. It uses the regression class tree, as
well as, estimates a set of linear transformations for the mean and
variance parameters of a Gaussian mixture HMM system. The 30th
Chapter of the Quran, with five of the most famous readers of the
Quran, was used for the training and testing of the data. The chapter
includes about 2000 distinct words. The advantages of using the
Quranic verses as the database in this developed recognizer are the
uniqueness of the words and the high level of orderliness between
verses. The level of accuracy from the tested data ranged 68 to 85%.
Abstract: Much time series data is generally from continuous dynamic system. Firstly, this paper studies the detection of the nonlinearity of time series from continuous dynamics systems by applying the Phase-randomized surrogate algorithm. Then, the Delay Vector Variance (DVV) method is introduced into nonlinearity test. The results show that under the different sampling conditions, the opposite detection of nonlinearity is obtained via using traditional test statistics methods, which include the third-order autocovariance and the asymmetry due to time reversal. Whereas the DVV method can perform well on determining nonlinear of Lorenz signal. It indicates that the proposed method can describe the continuous dynamics signal effectively.
Abstract: The aerodynamic noise radiation from a side view mirror (SVM) in the high-speed airflow is calculated by the combination of unsteady incompressible fluid flow analysis and acoustic analysis. The transient flow past the generic SVM is simulated with variable turbulence model, namely DES Detached Eddy Simulation and LES (Large Eddy Simulation). Detailed velocity vectors and contour plots of the time-varying velocity and pressure fields are presented along cut planes in the flow-field. Mean and transient pressure are also monitored at several points in the flow field and compared to corresponding experimentally data published in literature. The acoustic predictions made using the Ffowcs-Williams-Hawkins acoustic analogy (FW-H) and the boundary element (BEM).
Abstract: This paper considers the development of a two-point
predictor-corrector block method for solving delay differential
equations. The formulae are represented in divided difference form
and the algorithm is implemented in variable stepsize variable order
technique. The block method produces two new values at a single
integration step. Numerical results are compared with existing
methods and it is evident that the block method performs very well.
Stability regions of the block method are also investigated.
Abstract: This study examined the effects of eight weeks of
whole-body vibration training (WBVT) on vertical and decuple jump
performance in handball athletes. Sixteen collegiate Level I handball
athletes volunteered for this study. They were divided equally as
control group and experimental group (EG). During the period of the
study, all athletes underwent the same handball specific training, but
the EG received additional WBVT (amplitude: 2 mm, frequency: 20 -
40 Hz) three time per week for eight consecutive weeks. The vertical
jump performance was evaluated according to the maximum height of
squat jump (SJ) and countermovement jump (CMJ). Single factor
ANCOVA was used to examine the differences in each parameter
between the groups after training with the pretest values as a covariate.
The statistic significance was set at p < .05. After 8 weeks WBVT, the
EG had significantly improved the maximal height of SJ (40.92 ± 2.96
cm vs. 48.40 ± 4.70 cm, F = 5.14, p < .05) and the maximal height
CMJ (47.25 ± 7.48 cm vs. 52.20 ± 6.25 cm, F = 5.31, p < .05). 8 weeks
of additional WBVT could improve the vertical and decuple jump
performance in handball athletes. Enhanced motor unit
synchronization and firing rates, facilitated muscular contraction
stretch-shortening cycle, and improved lower extremity
neuromuscular coordination could account for these enhancements.
Abstract: A concern that researchers usually face in different
applications of Artificial Neural Network (ANN) is determination of
the size of effective domain in time series. In this paper, trial and
error method was used on groundwater depth time series to determine
the size of effective domain in the series in an observation well in
Union County, New Jersey, U.S. different domains of 20, 40, 60, 80,
100, and 120 preceding day were examined and the 80 days was
considered as effective length of the domain. Data sets in different
domains were fed to a Feed Forward Back Propagation ANN with
one hidden layer and the groundwater depths were forecasted. Root
Mean Square Error (RMSE) and the correlation factor (R2) of
estimated and observed groundwater depths for all domains were
determined. In general, groundwater depth forecast improved, as
evidenced by lower RMSEs and higher R2s, when the domain length
increased from 20 to 120. However, 80 days was selected as the
effective domain because the improvement was less than 1% beyond
that. Forecasted ground water depths utilizing measured daily data
(set #1) and data averaged over the effective domain (set #2) were
compared. It was postulated that more accurate nature of measured
daily data was the reason for a better forecast with lower RMSE
(0.1027 m compared to 0.255 m) in set #1. However, the size of input
data in this set was 80 times the size of input data in set #2; a factor
that may increase the computational effort unpredictably. It was
concluded that 80 daily data may be successfully utilized to lower the
size of input data sets considerably, while maintaining the effective
information in the data set.
Abstract: Recently, a model multi-agent e-commerce system based on mobile buyer agents and transfer of strategy modules was proposed. In this paper a different approach to code mobility is introduced, where agent mobility is replaced by local agent creation supplemented by similar code mobility as in the original proposal. UML diagrams of agents involved in the new approach to mobility and the augmented system activity diagram are presented and discussed.
Abstract: This was the first document revealing the
investigation of protein hydrolysate production optimization from J.
curcas cake. Proximate analysis of raw material showed 18.98%
protein, 5.31% ash, 8.52% moisture and 12.18% lipid. The
appropriate protein hydrolysate production process began with
grinding the J. curcas cake into small pieces. Then it was suspended
in 2.5% sodium hydroxide solution with ratio between solution/ J.
curcas cake at 80:1 (v/w). The hydrolysis reaction was controlled at
temperature 50 °C in water bath for 45 minutes. After that, the
supernatant (protein hydrolysate) was separated using centrifuge at
8000g for 30 minutes. The maximum yield of resulting protein
hydrolysate was 73.27 % with 7.34% moisture, 71.69% total protein,
7.12% lipid, 2.49% ash. The product was also capable of well
dissolving in water.
Abstract: This study examines perception of environmental
approach in small and medium-sized enterprises (SMEs) – the
process by which firms integrate environmental concern into
business. Based on a review of the literature, the paper synthesizes
focus on environmental issues with the reflection in a case study in
the Czech Republic. Two themes of corporate environmentalism are
discussed – corporate environmental orientation and corporate
stances toward environmental concerns. It provides theoretical
material on greening organizational culture that is helpful in
understanding the response of contemporary business to
environmental problems. We integrate theoretical predictions with
empirical findings confronted with reality. Scales to measure these
themes are tested in a survey of managers in 229 Czech firms. We
used the process of in-depth questioning. The research question was
derived and answered in the context of the corresponding literature
and conducted research. A case study showed us that environmental
approach is variety different (depending on the size of the firm) in
SMEs sector. The results of the empirical mapping demonstrate
Czech company’s approach to environment and define the problem
areas and pinpoint the main limitation in the expansion of
environmental aspects. We contribute to the debate for recognition of
the particular role of environmental issues in business reality.