Abstract: In this study, the precision heading process of
spur gears has been investigated by means of numerical
analysis. The effect of some parameters such as teeth number
and module on the forming force and material flow were
presented. The simulation works were performed rigid-plastic
finite element method using DEFORM 3D software. In order
to validate the estimated numerical results, they were
compared with those obtained experimentally during heading
of spur gear using lead as a model material. Results showed
that the optimum number of gear teeth is between 10 to 20,
that is because of being the specific pressure in its minimum
value.
Abstract: An actual power plant, which is the power plant of Iron and Steel Factory at Misurata city in Libya , has been modeled using Matlab in order to compare its results to the actual results of the actual cycle. This paper concentrates on two factors:
a- The comparison between exergy losses in the actual cycle and the modeled cycle.
b- The effect of extracting pressure on temperature water at boiler inlet.
Closed heat exchangers used in this plant have been substituted by open heat exchangers in the current study of the modeled power plant and the required changes in the pressure have been considered. In the following investigation the two points mentioned above are taken in consideration.
Abstract: The Informational Infrastructures of small and medium-sized manufacturing enterprises are relatively poor, there are serious shortages of capitals which can be invested in informatization construction, computer hardware and software resources, and human resources. To address the informatization issue in small and medium-sized manufacturing enterprises, and enable them to the application of advanced management thinking and enhance their competitiveness, the paper establish a manufacturing-oriented small and medium-sized enterprises informatization platform based on the ASP business intelligence technology, which effectively improves the scientificity of enterprises decision and management informatization.
Abstract: A novel concept to balance and tradeoff between
make-to-stock and make-to-order has been hybrid MTS/MTO production context. One of the most important decisions involved in
the hybrid MTS/MTO environment is determining whether a product
is manufactured to stock, to order, or hybrid MTS/MTO strategy. In this paper, a model based on analytic network process is developed to tackle the addressed decision. Since the regarded decision deals with
the uncertainty and ambiguity of data as well as experts- and
managers- linguistic judgments, the proposed model is equipped with
fuzzy sets theory. An important attribute of the model is its generality due to diverse decision factors which are elicited from the
literature and developed by the authors. Finally, the model is validated by applying to a real case study to reveal how the proposed
model can actually be implemented.
Abstract: Hypernetworks are a generalized graph structure
representing higher-order interactions between variables. We present a
method for self-organizing hypernetworks to learn an associative
memory of sentences and to recall the sentences from this memory.
This learning method is inspired by the “mental chemistry" model of
cognition and the “molecular self-assembly" technology in
biochemistry. Simulation experiments are performed on a corpus of
natural-language dialogues of approximately 300K sentences
collected from TV drama captions. We report on the sentence
completion performance as a function of the order of word-interaction
and the size of the learning corpus, and discuss the plausibility of this
architecture as a cognitive model of language learning and memory.
Abstract: Among all geo-hydrological relationships, rainfallrunoff
relationship is of utmost importance in any hydrological
investigation and water resource planning. Spatial variation, lag time
involved in obtaining areal estimates for the basin as a whole can
affect the parameterization in design stage as well as in planning
stage. In conventional hydrological processing of data, spatial aspect
is either ignored or interpolated at sub-basin level. Temporal
variation when analysed for different stages can provide clues for its
spatial effectiveness. The interplay of space-time variation at pixel
level can provide better understanding of basin parameters.
Sustenance of design structures for different return periods and their
spatial auto-correlations should be studied at different geographical
scales for better management and planning of water resources.
In order to understand the relative effect of spatio-temporal
variation in hydrological data network, a detailed geo-hydrological
analysis of Betwa river catchment falling in Lower Yamuna Basin is
presented in this paper. Moreover, the exact estimates about the
availability of water in the Betwa river catchment, especially in the
wake of recent Betwa-Ken linkage project, need thorough scientific
investigation for better planning. Therefore, an attempt in this
direction is made here to analyse the existing hydrological and
meteorological data with the help of SPSS, GIS and MS-EXCEL
software. A comparison of spatial and temporal correlations at subcatchment
level in case of upper Betwa reaches has been made to
demonstrate the representativeness of rain gauges. First, flows at
different locations are used to derive correlation and regression
coefficients. Then, long-term normal water yield estimates based on
pixel-wise regression coefficients of rainfall-runoff relationship have
been mapped. The areal values obtained from these maps can
definitely improve upon estimates based on point-based
extrapolations or areal interpolations.
Abstract: The biological activity of A. pullulans isolates against
species of the genus Fusarium, bacteria of the genus Azotobacter and
pseudomonads colonizing wheat kernels was evaluated. A field
experiment was carried out in 2009-2011, in north-eastern Poland.
Winter wheat (cv. Bogatka) plants were sprayed with a cell
suspension of A. pullulans at a density of 106 - 108 per cm3 water at
the stem elongation stage and the heading stage. Untreated plants
served as control. The abundance of epiphytic yeasts, bacteria of the
genus Azotobacter, pseudomonads and Fusarium pathogens on wheat
grain was estimated at harvest and after six months’ storage. The
average size of yeast communities was significantly greater on wheat
kernels treated with a cell suspension of A. pullulans, compared with
control samples. In 2010-2011, biological control reduced the
abundance of some species of the genus Fusarium.
Abstract: The higher compounded growth rates coupled with
favourable demographics in emerging markets portend abundant
opportunities for multinational organizations. With many
organizations competing for talent in these growing markets, their
ability to succeed will depend on their understanding of local
workforce needs and aspirations. Using data from the Towers Watson
2010 Global Workforce Study, this paper highlights differences in
employee engagement, turnover risks, and attraction and retention
drivers between the two markets. Apart from looking at the
traditional drivers of employee engagement, the study also explores
the value placed by employees on elements like a strong senior
leadership, managerial capabilities and career advancement
opportunities. Results reveal that emerging markets employees seem
to be more engaged and value the non-traditional elements more
highly than the developed markets employees.
Abstract: Heavy rainfall greatly affects the aerodynamic performance of the aircraft. There are many accidents of aircraft caused by aerodynamic efficiency degradation by heavy rain.
In this Paper we have studied the heavy rain effects on the aerodynamic efficiency of cambered NACA 64-210 and symmetric
NACA 0012 airfoils. Our results show significant increase in drag and decrease in lift. We used preprocessing software gridgen for creation of geometry and mesh, used fluent as solver and techplot as postprocessor. Discrete phase modeling called DPM is used to model the rain particles using two phase flow approach. The rain particles are assumed to be inert.
Both airfoils showed significant decrease in lift and increase in drag in simulated rain environment. The most significant difference between these two airfoils was the NACA 64-210 more sensitivity than NACA 0012 to liquid water content (LWC). We believe that the results showed in this paper will be useful for the designer of the commercial aircrafts and UAVs, and will be helpful for training of the pilots to control the airplanes in heavy rain.
Abstract: In aerospace applications, interactions of airflow with
aircraft structures can result in undesirable structural deformations.
This structural deformation in turn, can be predicted if the natural
modes of the structure are known. This can be achieved through
conventional modal testing that requires a known excitation force in
order to extract these dynamic properties. This technique can be
experimentally complex because of the need for artificial excitation
and it is also does not represent actual operational condition. The
current work presents part of research work that address the practical
implementation of operational modal analysis (OMA) applied to a
cantilevered hybrid composite plate employing single contactless
sensing system via laser vibrometer. OMA technique extracts the
modal parameters based only on the measurements of the dynamic
response. The OMA results were verified with impact hammer modal
testing and good agreement was obtained.
Abstract: In this paper we present modeling and simulation for
physical vapor deposition for metallic bipolar plates. In the models
we discuss the application of different models to simulate the
transport of chemical reactions of the gas species in the gas chamber.
The so called sputter process is an extremely sensitive process to
deposit thin layers to metallic plates. We have taken into account
lower order models to obtain first results with respect to the gas
fluxes and the kinetics in the chamber.
The model equations can be treated analytically in some
circumstances and complicated multi-dimensional models are solved
numerically with a software-package (UG unstructed grids, see [1]).
Because of multi-scaling and multi-physical behavior of the models,
we discuss adapted schemes to solve more accurate in the different
domains and scales. The results are discussed with physical
experiments to give a valid model for the assumed growth of thin
layers.
Abstract: Low temperature (LT) is one of the most abiotic
stresses causing loss of yield in wheat (T. aestivum). Four major
genes in wheat (Triticum aestivum L.) with the dominant alleles
designated Vrn–A1,Vrn–B1,Vrn–D1 and Vrn4, are known to have
large effects on the vernalization response, but the effects on cold
hardiness are ambiguous. Poor cold tolerance has restricted winter
wheat production in regions of high winter stress [9]. It was known
that nearly all wheat chromosomes [5] or at least 10 chromosomes of
21 chromosome pairs are important in winter hardiness [15]. The
objective of present study was to clarify the role of each chromosome
in cold tolerance. With this purpose we used 20 isogenic lines of
wheat. In each one of these isogenic lines only a chromosome from
‘Bezostaya’ variety (a winter habit cultivar) was substituted to
‘Capple desprez’ variety. The plant materials were planted in
controlled conditions with 20º C and 16 h day length in moderately
cold areas of Iran at Karaj Agricultural Research Station in 2006-07
and the acclimation period was completed for about 4 weeks in a
cold room with 4º C. The cold hardiness of these isogenic lines was
measured by LT50 (the temperature in which 50% of the plants are
killed by freezing stress).The experimental design was completely
randomized block design (RCBD)with three replicates. The results
showed that chromosome 5A had a major effect on freezing
tolerance, and then chromosomes 1A and 4A had less effect on this
trait. Further studies are essential to understanding the importance of
each chromosome in controlling cold hardiness in wheat.
Abstract: Rapid progress in process automation and tightening
quality standards result in a growing demand being placed on fault
detection and diagnostics methods to provide both speed and
reliability of motor quality testing. Doubly fed induction generators
are used mainly for wind energy conversion in MW power plants.
This paper presents a detection of an inter turn stator and an open
phase faults, in a doubly fed induction machine whose stator and
rotor are supplied by two pulse width modulation (PWM) inverters.
The method used in this article to detect these faults, is based on
Park-s Vector Approach, using a neural network.
Abstract: Defining strategic position of the organizations within
the industry environment is one of the basic and most important
phases of strategic planning to which extent that one of the
fundamental schools of strategic planning is the strategic positioning
school. In today-s knowledge-based economy and dynamic
environment, it is essential for universities as the centers of
education, knowledge creation and knowledge worker evolvement.
Till now, variant models with different approaches to strategic
positioning are deployed in defining the strategic position within the
various industries. Balanced Scorecard as one of the powerful models
for strategic positioning, analyzes all aspects of the organization
evenly. In this paper with the consideration of BSC strength in
strategic evaluation, it is used for analyzing the environmental
position of the best-s Iranian Business Schools. The results could be
used in developing strategic plans for these schools as well as other
Iranian Management and Business Schools.
Abstract: In this study is presented a general methodology to
predict the performance of a continuous near-critical fluid extraction
process to remove compounds from aqueous solutions using hollow
fiber membrane contactors. A comprehensive 2D mathematical
model was developed to study Porocritical extraction process. The
system studied in this work is a membrane based extractor of ethanol
and acetone from aqueous solutions using near-critical CO2.
Predictions of extraction percentages obtained by simulations have
been compared to the experimental values reported by Bothun et al.
[5]. Simulations of extraction percentage of ethanol and acetone
show an average difference of 9.3% and 6.5% with the experimental
data, respectively. More accurate predictions of the extraction of
acetone could be explained by a better estimation of the transport
properties in the aqueous phase that controls the extraction of this
solute.
Abstract: Modern civilization has come in recent decades into a new phase in its development, called the information society. The concept of "information society" has become one of the most common. Therefore, the attempt to understand what exactly the society we live in, what are its essential features, and possible future scenarios, is important to the social and philosophical analysis. At the heart of all these deep transformations is more increasing, almost defining role knowledge and information as play substrata of «information society». The mankind opened for itself and actively exploits a new resource – information. Information society puts forward on the arena new type of the power, at the heart of which activity – mastering by a new resource: information and knowledge. The password of the new power – intelligence as synthesis of knowledge, information and communications, the strength of mind, fundamental sociocultural values. In a postindustrial society, the power of knowledge and information is crucial in the management of the company, pushing into the background the influence of money and state coercion.
Abstract: In this paper, we first show a relationship between two
stabilizing controllers, which presents an extended feedback system
using two stabilizing controllers. Then, we apply this relationship to
the two-stage compensator design. In this paper, we consider singleinput
single-output plants. On the other hand, we do not assume the
coprime factorizability of the model. Thus, the results of this paper
are based on the factorization approach only, so that they can be
applied to numerous linear systems.
Abstract: Food mileage is one of the important issues concerning environmental sustainability. In this research we have utilized a prototype platform with iterative user-centered testing. With these findings we successfully demonstrate the use of the context of persuasive methods to influence users- attitudes towards the sustainable concept.
Abstract: In the present research, a finite element model is
presented to study the geometrical and material nonlinear behavior of
reinforced concrete plane frames considering soil-structure
interaction. The nonlinear behaviors of concrete and reinforcing steel
are considered both in compression and tension up to failure. The
model takes account also for the number, diameter, and distribution
of rebar along every cross section. Soil behavior is taken into
consideration using four different models; namely: linear-, nonlinear
Winkler's model, and linear-, nonlinear continuum model. A
computer program (NARC) is specially developed in order to
perform the analysis. The results achieved by the present model show
good agreement with both theoretical and experimental published
literature. The nonlinear behavior of a rectangular frame resting on
soft soil up to failure using the proposed model is introduced for
demonstration.
Abstract: Automatic Vehicle Identification (AVI) has many
applications in traffic systems (highway electronic toll collection, red
light violation enforcement, border and customs checkpoints, etc.).
License Plate Recognition is an effective form of AVI systems. In
this study, a smart and simple algorithm is presented for vehicle-s
license plate recognition system. The proposed algorithm consists of
three major parts: Extraction of plate region, segmentation of
characters and recognition of plate characters. For extracting the
plate region, edge detection algorithms and smearing algorithms are
used. In segmentation part, smearing algorithms, filtering and some
morphological algorithms are used. And finally statistical based
template matching is used for recognition of plate characters. The
performance of the proposed algorithm has been tested on real
images. Based on the experimental results, we noted that our
algorithm shows superior performance in car license plate
recognition.