Abstract: Key management represents a major and the most
sensitive part of cryptographic systems. It includes key generation,
key distribution, key storage, and key deletion. It is also considered
the hardest part of cryptography. Designing secure cryptographic
algorithms is hard, and keeping the keys secret is much harder.
Cryptanalysts usually attack both symmetric and public key
cryptosystems through their key management. We introduce a
protocol to exchange cipher keys over insecure communication
channel. This protocol is based on public key cryptosystem,
especially elliptic curve cryptosystem. Meanwhile, it tests the cipher
keys and selects only the good keys and rejects the weak one.
Abstract: This paper describes the implementation and testing
of a multichannel active noise control system (ANCS) based on the
filtered-inverse LMS (FILMS) algorithm. The FILMS algorithm is
derived from the well-known filtered-x LMS (FXLMS) algorithm
with the aim to improve the rate of convergence of the multichannel
FXLMS algorithm and to reduce its computational load. Laboratory
setup and techniques used to implement this system efficiently are
described in this paper. Experiments performed in order to test the
performance of the FILMS algorithm are discussed and the obtained
results presented.
Abstract: A new distance-adjusted approach is proposed in
which static square contours are defined around an estimated
symbol in a QAM constellation, which create regions that
correspond to fixed step sizes and weighting factors. As a
result, the equalizer tap adjustment consists of a linearly
weighted sum of adaptation criteria that is scaled by a variable
step size. This approach is the basis of two new algorithms: the
Variable step size Square Contour Algorithm (VSCA) and the
Variable step size Square Contour Decision-Directed
Algorithm (VSDA). The proposed schemes are compared with
existing blind equalization algorithms in the SCA family in
terms of convergence speed, constellation eye opening and
residual ISI suppression. Simulation results for 64-QAM
signaling over empirically derived microwave radio channels
confirm the efficacy of the proposed algorithms. An RTL
implementation of the blind adaptive equalizer based on the
proposed schemes is presented and the system is configured to
operate in VSCA error signal mode, for square QAM signals
up to 64-QAM.
Abstract: In the paper, the performance of quasi-synchronous
CDMA (QS-CDMA) system, which can allow an increased timing
error in synchronized access, is discussed. Average BER performance
of the system is analyzed in the condition of different access timing
error and different asynchronous users by simulation in AWGN
channel. The results show that QS-CDMA system is shown to have
great performance gain over the asynchronous system when access
timing error is within a few chips and asynchronous users is tolerable.
However, with access timing error increasing and asynchronous users
increasing, the performance of QS-CDMA will degrade. Also, we can
determine the number of tolerable asynchronous users for different
access timing error by simulation figures.
Abstract: The special constraints of sensor networks impose a
number of technical challenges for employing them. In this review,
we study the issues and existing protocols in three areas: coverage
and routing. We present two types of coverage problems: to
determine the minimum number of sensor nodes that need to perform
active sensing in order to monitor a certain area; and to decide the
quality of service that can be provided by a given sensor network.
While most routing protocols in sensor networks are data-centric,
there are other types of routing protocols as well, such as
hierarchical, location-based, and QoS-aware. We describe and
compare several protocols in each group. We present several multipath
routing protocols and single-path with local repair routing
protocols, which are proposed for recovering from sensor node
crashes. We also discuss some transport layer schemes for reliable
data transmission in lossy wireless channels.
Abstract: Inter-symbol interference if not taken care off may cause severe error at the receiver and the detection of signal becomes difficult. An adaptive equalizer employing Recursive Least Squares algorithm can be a good compensation for the ISI problem. In this paper performance of communication link in presence of Least Mean Square and Recursive Least Squares equalizer algorithm is analyzed. A Model of communication system having Quadrature amplitude modulation and Rician fading channel is implemented using MATLAB communication block set. Bit error rate and number of errors is evaluated for RLS and LMS equalizer algorithm, due to change in Signal to Noise Ratio (SNR) and fading component gain in Rician fading Channel.
Abstract: In recent years asymmetric cross section aluminum
alloy stock has been finding increasing use in various industrial manufacturing areas such as general structures and automotive
components. In these areas, components are generally required to have
complex curved configuration and, as such, a bending process is required during manufacture. Undesirable deformation in bending
processes such as flattening or wrinkling can easily occur when thin-walled sections are bent. Hence, a thorough understanding of the
bending behavior of such sections is needed to prevent these undesirable deformations. In this study, the bending behavior of
asymmetric channel section was examined using finite element analysis (FEA). Typical methods of preventing undesirable
deformation, such as asymmetric laminated elastic mandrels were included in FEA model of draw bending. Additionally, axial tension
was applied to prevent wrinkling. By utilizing the FE simulations effect of restriction dies and axial tension on undesirable deformation during the process was clarified.
Abstract: Cyclic delay diversity (CDD) is a simple technique to
intentionally increase frequency selectivity of channels for orthogonal
frequency division multiplexing (OFDM).This paper proposes a residual
carrier frequency offset (RFO) estimation scheme for OFDMbased
broadcasting system using CDD. In order to improve the RFO
estimation, this paper addresses a decision scheme of the amount of
cyclic delay and pilot pattern used to estimate the RFO. By computer
simulation, the proposed estimator is shown to benefit form propoerly
chosen delay parameter and perform robustly.
Abstract: The importance of nurturing, accumulating, and efficiently deploying knowledge resources through formal structures and organisational mechanisms is well understood. Recent trends in knowledge management (KM) highlight that the effective creation and transfer of knowledge can also rely upon extra-organisational channels, such as, informal networks. The perception exists that the role of informal networks in knowledge creation and performance has been underestimated in the organisational context. Literature indicates that many managers fail to comprehend and successfully exploit the potential role of informal networks to create value for their organisations. This paper investigates: 1) whether managers share work-specific knowledge with informal contacts within and outside organisational boundaries; and 2) what do they think is the importance of this knowledge collaboration in their learning and work outcomes.
Abstract: The threshold voltage and capacitance voltage characteristics of ultra-thin Silicon-on-Insulator MOSFET are greatly influenced by the thickness and doping concentration of the silicon film. In this work, the capacitance voltage characteristics and threshold voltage of the device have been analyzed with quantum mechanical effects using the Self-Consistent model. Reduction of channel thickness and adding doping impurities cause an increase in the threshold voltage. Moreover, the temperature effects cause a significant amount of threshold voltage shift. The temperature dependence of threshold voltage has also been observed with Self- Consistent approach which are well supported from experimental performance of practical devices.
Abstract: Support Vector Machine (SVM) is a recent class of statistical classification and regression techniques playing an increasing role in applications to detection problems in various engineering problems, notably in statistical signal processing, pattern recognition, image analysis, and communication systems. In this paper, SVM is applied to an infrared (IR) binary communication system with different types of channel models including Ricean multipath fading and partially developed scattering channel with additive white Gaussian noise (AWGN) at the receiver. The structure and performance of SVM in terms of the bit error rate (BER) metric is derived and simulated for these channel stochastic models and the computational complexity of the implementation, in terms of average computational time per bit, is also presented. The performance of SVM is then compared to classical binary signal maximum likelihood detection using a matched filter driven by On-Off keying (OOK) modulation. We found that the performance of SVM is superior to that of the traditional optimal detection schemes used in statistical communication, especially for very low signal-to-noise ratio (SNR) ranges. For large SNR, the performance of the SVM is similar to that of the classical detectors. The implication of these results is that SVM can prove very beneficial to IR communication systems that notoriously suffer from low SNR at the cost of increased computational complexity.
Abstract: In the context of sensor networks, where every few
dB saving counts, the novel node cooperation schemes are reviewed
where MIMO techniques play a leading role. These methods could be
treated as joint approach for designing physical layer of their
communication scenarios. Then we analyzed the BER performance
of transmission diversity schemes under a general fading channel
model and proposed a power allocation strategy to the transmitting
sensor nodes. This approach is then compared to an equal-power
assignment method and its performance enhancement is verified by
the simulation. Another key point of the contribution lies in the
combination of optimal power allocation and sensor nodes-
cooperation in a transmission diversity regime (MISO). Numerical
results are given through figures to demonstrate the optimality and
efficiency of proposed combined approach.
Abstract: The turbulent mixing of coolant streams of different
temperature and density can cause severe temperature fluctuations in
piping systems in nuclear reactors. In certain periodic contraction
cycles these conditions lead to thermal fatigue. The resulting aging
effect prompts investigation in how the mixing of flows over a sharp
temperature/density interface evolves. To study the fundamental
turbulent mixing phenomena in the presence of density gradients,
isokinetic (shear-free) mixing experiments are performed in a square
channel with Reynolds numbers ranging from 2-500 to 60-000.
Sucrose is used to create the density difference. A Wire Mesh Sensor
(WMS) is used to determine the concentration map of the flow in the
cross section. The mean interface width as a function of velocity,
density difference and distance from the mixing point are analyzed
based on traditional methods chosen for the purposes of
atmospheric/oceanic stratification analyses. A definition of the
mixing layer thickness more appropriate to thermal fatigue and based
on mixedness is devised. This definition shows that the thermal
fatigue risk assessed using simple mixing layer growth can be
misleading and why an approach that separates the effects of large
scale (turbulent) and small scale (molecular) mixing is necessary.
Abstract: In-core memory requirement is a bottleneck in solving
large three dimensional Navier-Stokes finite element problem
formulations using sparse direct solvers. Out-of-core solution
strategy is a viable alternative to reduce the in-core memory
requirements while solving large scale problems. This study
evaluates the performance of various out-of-core sequential solvers
based on multifrontal or supernodal techniques in the context of
finite element formulations for three dimensional problems on a
Windows platform. Here three different solvers, HSL_MA78,
MUMPS and PARDISO are compared. The performance of these
solvers is evaluated on a 64-bit machine with 16GB RAM for finite
element formulation of flow through a rectangular channel. It is
observed that using out-of-core PARDISO solver, relatively large
problems can be solved. The implementation of Newton and
modified Newton's iteration is also discussed.
Abstract: The bit error rate (BER) performance for ultra-wide
band (UWB) indoor communication with impact of metallic furniture
is investigated. The impulse responses of different indoor
environments for any transmitter and receiver location are computed
by shooting and bouncing ray/image and inverse Fourier transform
techniques. By using the impulse responses of these multipath
channels, the BER performance for binary pulse amplitude
modulation (BPAM) impulse radio UWB communication system are
calculated. Numerical results have shown that the multi-path effect
by the metallic cabinets is an important factor for BER performance.
Also the outage probability for the UWB multipath environment with
metallic cabinets is more serious (about 18%) than with wooden
cabinets. Finally, it is worth noting that in these cases the present
work provides not only comparative information but also quantitative
information on the performance reduction.
Abstract: Proper orthogonal decomposition (POD) is used to reconstruct spatio-temporal data of a fully developed turbulent channel flow with density variation at Reynolds number of 150, based on the friction velocity and the channel half-width, and Prandtl number of 0.71. To apply POD to the fully developed turbulent channel flow with density variation, the flow field (velocities, density, and temperature) is scaled by the corresponding root mean square values (rms) so that the flow field becomes dimensionless. A five-vector POD problem is solved numerically. The reconstructed second-order moments of velocity, temperature, and density from POD eigenfunctions compare favorably to the original Direct Numerical Simulation (DNS) data.
Abstract: This paper mainly about the study on one of the
widely used error correcting codes that is Low parity check Codes
(LDPC). In this paper, the Regular LDPC code has been discussed
The LDPC codes explained in this paper is about the Regular Binary
LDPC codes or the Gallager.
Abstract: Whereas cellular wireless communication systems are
subject to short-and long-term fading. The effect of wireless channel
has largely been ignored in most of the teletraffic assessment
researches. In this paper, a mathematical teletraffic model is proposed
to estimate blocking and forced termination probabilities of cellular
wireless networks as a result of teletraffic behavior as well as the
outage of the propagation channel. To evaluate the proposed
teletraffic model, gamma inter-arrival and general service time
distributions have been considered based on wireless channel fading
effect. The performance is evaluated and compared with the classical
model. The proposed model is dedicated and investigated in different
operational conditions. These conditions will consider not only the
arrival rate process, but also, the different faded channels models.
Abstract: Sharing motivations of viral advertisements by
consumers and the impacts of these advertisements on the
perceptions for brand will be questioned in this study. Three
fundamental questions are answered in the study. These are
advertisement watching and sharing motivations of individuals,
criteria of liking viral advertisement and the impact of individual
attitudes for viral advertisement on brand perception respectively.
This study will be carried out via a viral advertisement which was
practiced in Turkey. The data will be collected by survey method and
the sample of the study consists of individuals who experienced the
practice of sample advertisement. Data will be collected by online
survey method and will be analyzed by using SPSS statistical
package program.
Recently traditional advertisement mind have been changing. New
advertising approaches which have significant impacts on consumers
have been argued. Viral advertising is a modernist advertisement
mind which offers significant advantages to brands apart from
traditional advertising channels such as television, radio and
magazines. Viral advertising also known as Electronic Word-of-
Mouth (eWOM) consists of free spread of convincing messages sent
by brands among interpersonal communication. When compared to
the traditional advertising, a more provocative thematic approach is
argued.
The foundation of this approach is to create advertisements that
are worth sharing with others by consumers. When that fact is taken
into consideration, in a manner of speaking it can also be stated that
viral advertising is media engineering.
The content worth sharing makes people being a volunteer
spokesman of a brand and strengthens the emotional bonds among
brand and consumer. Especially for some sectors in countries which
are having traditional advertising channel limitations, viral
advertising creates vital advantages.
Abstract: TUSAT is a prospective Turkish
Communication Satellite designed for providing mainly data
communication and broadcasting services through Ku-Band
and C-Band channels. Thermal control is a vital issue in
satellite design process. Therefore, all satellite subsystems and
equipments should be maintained in the desired temperature
range from launch to end of maneuvering life. The main
function of the thermal control is to keep the equipments and
the satellite structures in a given temperature range for various
phases and operating modes of spacecraft during its lifetime.
This paper describes the thermal control design which uses
passive and active thermal control concepts. The active
thermal control is based on heaters regulated by software via
thermistors. Alternatively passive thermal control composes of
heat pipes, multilayer insulation (MLI) blankets, radiators,
paints and surface finishes maintaining temperature level of
the overall carrier components within an acceptable value.
Thermal control design is supported by thermal analysis using
thermal mathematical models (TMM).