Abstract: In our paper we describe the security capabilities of
data collection. Data are collected with probes located in the near and
distant surroundings of the company. Considering the numerous
obstacles e.g. forests, hills, urban areas, the data collection is realized
in several ways. The collection of data uses connection via wireless
communication, LAN network, GSM network and in certain areas
data are collected by using vehicles. In order to ensure the connection
to the server most of the probes have ability to communicate in
several ways. Collected data are archived and subsequently used in
supervisory applications.
To ensure the collection of the required data, it is necessary to
propose algorithms that will allow the probes to select suitable
communication channel.
Abstract: The paper deals with communication standards for
control and production system. The authors formulate the
requirements for communication security protection. The paper is
focused on application protocols of the industrial networks and their
basic classification. The typical attacks are analysed and the safety
protection, based on requirements for specific industrial network is
suggested and defined in this paper.
Abstract: In the present study, we have synthesized Cr and Fe
doped zinc oxide (ZnO) nanostructures (Zn1-δCraFebO; where δ = a +
b = 20%, a = 5, 6, 8 & 10% and b = 15, 14, 12 & 10%) via sol-gel
method at different doping concentrations. The synthesized samples
were characterized for structural properties by X-ray diffractrometer
and field emission scanning electron microscope and the optical
properties were carried out through photoluminescence and UVvisible
spectroscopy. The particle size calculated through field
emission scanning electron microscope varies from 41 to 96 nm for
the samples synthesized at different doping concentrations. The
optical band gaps calculated through UV-visible spectroscopy are
found to be decreasing from 3.27 to 3.02 eV as the doping
concentration of Cr increases and Fe decreases.
Abstract: This study discovers a novel framework of individual
level technology adoption known as I-P (Individual- Privacy) towards
health information application in Smart National Identity Card. Many
countries introduced smart national identity card (SNIC) with various
applications such as health information application embedded inside
it. However, the degree to which citizens accept and use some of the
embedded applications in smart national identity remains unknown to
many governments and application providers as well. Moreover, the
factors of trust, perceived risk, Privacy concern and perceived
credibility need to be incorporated into more comprehensive models
such as extended Unified Theory of Acceptance and Use of
Technology known as UTAUT2. UTAUT2 is a mainly widespread
and leading theory up to now. This research identifies factors
affecting the citizens’ behavioural intention to use health information
application embedded in SNIC and extends better understanding on
the relevant factors that the government and the application providers
would need to consider in predicting citizens’ new technology
acceptance in the future. We propose a conceptual framework by
combining the UTAUT2 and Privacy Calculus Model constructs and
also adding perceived credibility as a new variable. The proposed
framework may provide assistance to any government planning,
decision, and policy makers involving e-government projects.
Empirical study may be conducted in the future to provide proof and
empirically validate this I-P framework.
Abstract: The aim of this paper is to trace the historical
development of the accounting profession in Libya, in order to
identify challenges facing the profession as the country moves from a
closed to emerging economy. The study is based on a literature
review and archival research. Accounting information has a vital role
to play in the achievement of economic goals in developing and
emerging economies, but a well qualified accounting profession is
required. In the context of institutional instability and unique cultural
factors, the accounting profession in Libya faces educational and
legal challenges if it is to achieve its potential in assisting the country
to reach its economic goals. This study focuses on one country,
which does limit its generalisability. However, it also suggests
fruitful research areas in considering the impact and challenge of
historic factors on the accounting profession in emerging economies.
Centrally planned economies require a body of well trained
professional accountants if they are to emerge onto the global
economic arena. Studies on the accounting profession have focused
primarily on those in developed economies, where the need for
meaningful accounting information for decision making is taken for
granted and there is a well trained, professional workforce. This study
of the profession in an emerging economy highlights the efforts that
will be needed to ensure the contribution of the profession to the
economic wellbeing of other emerging economies.
Abstract: Fuzzy systems have been successfully used for
exchange rate forecasting. However, fuzzy system is very confusing
and complex to be designed by an expert, as there is a large set of
parameters (fuzzy knowledge base) that must be selected, it is not a
simple task to select the appropriate fuzzy knowledge base for an
exchange rate forecasting. The researchers often look the effect of
fuzzy knowledge base on the performances of fuzzy system
forecasting. This paper proposes a genetic fuzzy predictor to forecast
the future value of daily US Dollar/Euro exchange rate time’s series.
A range of methodologies based on a set of fuzzy predictor’s which
allow the forecasting of the same time series, but with a different
fuzzy partition. Each fuzzy predictor is built from two stages, where
each stage is performed by a real genetic algorithm.
Abstract: Fritillaria oranensis (Liliaceae) was described in 1874
by pomel from Algeria. Plant samples have been collected from the
mount of Tessala (Sidi-Bel-Abbes). The morphological features of
various organs of the plant are described in detail. In the
morphological part of the study, features of various organs of the
plants such as stem and leaf were determined and illustrated.
Ecological studies provide information about the physical and
chemical structure of soil types in Tessala Mountain. The aim of this
original investigation is to put forth ecological and anatomical
features of these species for the first time, but at the same time given
detailed account of the morphological characteristics of the stem and
leaf of Fritillaria oranensis.
Abstract: Natural gas, as one of the most important sources of
energy for many of the industrial and domestic users all over the
world, has a complex, huge supply chain which is in need of heavy
investments in all the phases of exploration, extraction, production,
transportation, storage and distribution. The main purpose of supply
chain is to meet customers’ need efficiently and with minimum cost.
In this study, with the aim of minimizing economic costs, different
levels of natural gas supply chain in the form of a multi-echelon,
multi-period fuzzy linear programming have been modeled. In this
model, different constraints including constraints on demand
satisfaction, capacity, input/output balance and presence/absence of a
path have been defined. The obtained results suggest efficiency of the
recommended model in optimal allocation and reduction of supply
chain costs.
Abstract: The purpose of this project is to carry out an analysis
and determine the profile of actual lean manufacturing processes in
the Metropolitan Area of Bucaramanga. Through the analysis of
qualitative and quantitative variables it was possible to establish how
these manufacturers develop production practices that ensure their
competitiveness and productivity in the market.
In this study, a random sample of metallurgic and wrought iron
companies was applied, following which a quantitative focus and
analysis was used to formulate a qualitative methodology for
measuring the level of lean manufacturing procedures in the industry.
A qualitative evaluation was also carried out through a multivariate
analysis using the Numerical Taxonomy System (NTSYS) program
which should allow for the determination of Lean Manufacturing
profiles.
Through the results it was possible to observe how the companies
in the sector are doing with respect to Lean Manufacturing Practices,
as well as identify the level of management that these companies
practice with respect to this topic. In addition, it was possible to
ascertain that there is no one dominant profile in the sector when it
comes to Lean Manufacturing.
It was established that the companies in the metallurgic and
wrought iron industry show low levels of Lean Manufacturing
implementation. Each one carries out diverse actions that are
insufficient to consolidate a sectoral strategy for developing a
competitive advantage which enables them to tie together a
production strategy.
Abstract: The aim of present study was to monitor the presence
of Trichodina sp. in Rainbow trout, Oncorhynchus mykiss collected
from various fish farms in the western provinces of Iran during
January, 2013- January, 2014. Out of 675 sampled fish 335, (49.16%)
were infested with Trichodina. The highest prevalence was observed
in the spring and winter followed by autumn and summer. In general,
the intensity of infection was low except in cases where outbreaks of
Trichodiniasis endangered the survival of fish in some ponds. In light
infestation Trichodina is usually present on gills, fins and skin of
apparently healthy fish. Clinical signs of Trichodiniasis only appear
on fish with heavy infections and cases of moderate ones that are
usually exposed to one or more stress factors including, rough
handling during transportation from ponds, overcrowdness,
malnutrition, high of free ammonia and low of oxygen concentration.
Clinical signs of Trichodiniasis in sampled fish were sluggish
movement, loss of appetite, black coloration, necrosis and ulcer on
different parts of the body, detached scales and excessive
accumulation of mucous in gill pouches. The most obvious
histopathological changes in diseased fish were sloughing of the
epidermal layer, aggregation of leucocytes and melanine-carrying
cells (between the dermis and hypodermis) and proliferative changes
including hyperplasia and hypertrophy of the epithelial lining cells of
gill filaments which resulted in fusion of secondary lamellae. Control
of Trichodiniasis, has been achieved by formalin bath treatment at a
concentration of 250 ppm for one hour.
Abstract: Multispectral screening systems are becoming more
popular because of their very interesting properties and applications.
One of the most significant applications of multispectral screening
systems is prevention of terrorist attacks. There are many kinds of
threats and many methods of detection. Visual detection of objects
hidden under clothing of a person is one of the most challenging
problems of threats detection. There are various solutions of the
problem; however, the most effective utilize multispectral
surveillance imagers. The development of imaging devices and
exploration of new spectral bands is a chance to introduce new
equipment for assuring public safety. We investigate the possibility
of long lasting detection of potentially dangerous objects covered
with various types of clothing. In the article we present the results of
comparative studies of passive imaging in three spectrums – visible,
infrared and terahertz.
Abstract: Kuosheng nuclear power plant (NPP) is a BWR/6 type
NPP and located on the northern coast of Taiwan. First, Kuosheng
NPP TRACE model were developed in this research. In order to assess
the system response of Kuosheng NPP TRACE model, startup tests
data were used to evaluate Kuosheng NPP TRACE model. Second, the
overpressurization transient analysis of Kuosheng NPP TRACE model
was performed. Besides, in order to confirm the mechanical property
and integrity of fuel rods, FRAPTRAN analysis was also performed in
this study.
Abstract: Recently, an increasing number of researchers have
been focusing on working out realistic solutions to sustainability
problems. As sustainability issues gain higher importance for
organisations, the management of such decisions becomes critical.
Knowledge representation is a fundamental issue of complex
knowledge based systems. Many types of sustainability problems
would benefit from models based on experts’ knowledge. Cognitive
maps have been used for analyzing and aiding decision making. A
cognitive map can be made of almost any system or problem. A
fuzzy cognitive map (FCM) can successfully represent knowledge
and human experience, introducing concepts to represent the essential
elements and the cause and effect relationships among the concepts to
model the behaviour of any system. Integrated waste management
systems (IWMS) are complex systems that can be decomposed to
non-related and related subsystems and elements, where many factors
have to be taken into consideration that may be complementary,
contradictory, and competitive; these factors influence each other and
determine the overall decision process of the system. The goal of the
present paper is to construct an efficient IWMS which considers
various factors. The authors’ intention is to propose an expert based
system design approach for implementing expert decision support in
the area of IWMSs and introduces an appropriate methodology for
the development and analysis of group FCM. A framework for such a
methodology consisting of the development and application phases is
presented.
Abstract: This paper presents a real-time visualization technique
and filtering of classified LiDAR point clouds. The visualization is
capable of displaying filtered information organized in layers by the
classification attribute saved within LiDAR datasets. We explain the
used data structure and data management, which enables real-time
presentation of layered LiDAR data. Real-time visualization is
achieved with LOD optimization based on the distance from the
observer without loss of quality. The filtering process is done in two
steps and is entirely executed on the GPU and implemented using
programmable shaders.
Abstract: 3D part library is an ideal approach to reuse the
existing design and thus facilitates the modeling process, which will
enhance the efficiency. In this paper, we implemented the thought on
the SolidWorks platform. The system supports the functions of type
and parameter selection, 3D template driving and part assembly.
Finally, BOM is exported in Excel format. Experiment shows that our
method can satisfy the requirement of die and mold designers.
Abstract: The North-eastern part of India, which receives
heavier rainfall than other parts of the subcontinent, is of great
concern now-a-days with regard to climate change. High intensity
rainfall for short duration and longer dry spell, occurring due to
impact of climate change, affects river morphology too. In the present
study, an attempt is made to delineate the North-eastern region of
India into some homogeneous clusters based on the Fuzzy Clustering
concept and to compare the resulting clusters obtained by using
conventional methods and nonconventional methods of clustering.
The concept of clustering is adapted in view of the fact that, impact
of climate change can be studied in a homogeneous region without
much variation, which can be helpful in studies related to water
resources planning and management. 10 IMD (Indian Meteorological
Department) stations, situated in various regions of the North-east,
have been selected for making the clusters. The results of the Fuzzy
C-Means (FCM) analysis show different clustering patterns for
different conditions. From the analysis and comparison it can be
concluded that nonconventional method of using GCM data is
somehow giving better results than the others. However, further
analysis can be done by taking daily data instead of monthly means to
reduce the effect of standardization.
Abstract: In this paper, snow samples containing dust particles
from several sampling points around the city of Ostrava were
analyzed. The pH values of sampled snow were measured and solid
particles analyzed. Particle size, zeta potential and content of selected
heavy metals were determined in solid particles. The pH values of
most samples lay in the slightly acid region. Mean values of particle
size ranged from 290.5 to 620.5 nm. Zeta potential values varied
between -5 and -26.5 mV. The following heavy metal concentration
ranges were found: copper 0.08-0.75 mg/g, lead 0.05-0.9 mg/g,
manganese 0.45-5.9 mg/g and iron 25.7-280.46 mg/g. The highest
values of copper and lead were found in the vicinity of busy
crossroads, and on the contrary, the highest levels of manganese and
iron were detected close to a large steelworks. The proportion
between pH values, zeta potentials, particle sizes and heavy metal
contents was established. Zeta potential decreased with rising pH
values and, simultaneously, heavy metal content in solid particles
increased. At the same time, higher metal content corresponded to
lower particle size.
Abstract: The Port of Townsville conducts regular annual
maintenance dredging to maintain depths of its harbor basin and
approach channels for the navigational safety of the vessels against
the natural accumulation of marine sediments. In addition to the
regular maintenance dredging, the port undertakes emergency
dredging in cases where large quantities of sediments are mobilized
and deposited in port waters by cyclone or major flood events. The
maintenance dredging material derived from the port may be
disposed at sea or on land in accordance with relevant state and
commonwealth regulations. For the land disposal, the dredged mud
slurry is hydraulically placed into containment ponds and left to
undergo sedimentation and self-weight consolidation to form fill
material for land reclamation. This paper provides an overview of the
maintenance dredging at the Port of Townsville and emphasis on
maintenance dredging requirements, sediment quality, bathymetry,
dredging methods used, and dredged material disposal options.
Abstract: Metallic foams have good potential for lightweight
structures for impact and blast mitigation. Therefore it is important to
find out the optimized foam structure (i.e. cell size, shape, relative
density, and distribution) to maximise energy absorption. In this
paper, quasistatic compression and microstructural characterization
of closed-cell aluminium foams of different pore size and cell
distributions have been carried out. We present results for two
different aluminium metal foams of density 0.49-0.51 g/cc and 0.31-
0.34 g/cc respectively that have been tested in quasi-static
compression. The influence of cell geometry and cell topology on
quasistatic compression behaviour has been investigated using optical
microscope and computed tomography (micro-CT) analysis. It is
shown that the deformation is not uniform in the structure and
collapse begins at the weakest point.
Abstract: Medical imaging technology has experienced a
dramatic change in the last few years. Medical imaging refers to the
techniques and processes used to create images of the human body
(or parts thereof) for various clinical purposes such as medical
procedures and diagnosis or medical science including the study of
normal anatomy and function. With the growth of computers and
image technology, medical imaging has greatly influenced the
medical field. The diagnosis of a health problem is now highly
dependent on the quality and the credibility of the image analysis.
This paper deals with the various aspects and types of medical
imaging.