Abstract: Rutting is one of the major load-related distresses in airport flexible pavements. Rutting in paving materials develop gradually with an increasing number of load applications, usually appearing as longitudinal depressions in the wheel paths and it may be accompanied by small upheavals to the sides. Significant research has been conducted to determine the factors which affect rutting and how they can be controlled. Using the experimental design concepts, a series of tests can be conducted while varying levels of different parameters, which could be the cause for rutting in airport flexible pavements. If proper experimental design is done, the results obtained from these tests can give a better insight into the causes of rutting and the presence of interactions and synergisms among the system variables which have influence on rutting. Although traditionally, laboratory experiments are conducted in a controlled fashion to understand the statistical interaction of variables in such situations, this study is an attempt to identify the critical system variables influencing airport flexible pavement rut depth from a statistical DoE perspective using real field data from a full-scale test facility. The test results do strongly indicate that the response (rut depth) has too much noise in it and it would not allow determination of a good model. From a statistical DoE perspective, two major changes proposed for this experiment are: (1) actual replication of the tests is definitely required, (2) nuisance variables need to be identified and blocked properly. Further investigation is necessary to determine possible sources of noise in the experiment.
Abstract: A multi fingered dexterous anthropomorphic hand is
being developed by the authors. The focus of the hand is the
replacement of human operators in hazardous environments and also
in environments where zero tolerance is observed for the human
errors. The robotic hand will comprise of five fingers (four fingers
and one thumb) each having four degrees of freedom (DOF) which
can perform flexion, extension, abduction, adduction and also
circumduction. For the actuation purpose pneumatic muscles and
springs will be used. The paper exemplifies the mechanical design for
the robotic hand. It also describes different mechanical designs that
have been developed before date.
Abstract: A new approach to determine the machine layout in flexible manufacturing cell, and to find the feasible robot configuration of the robot to achieve minimum cycle time is presented in this paper. The location of the input/output location and the optimal robot configuration is obtained for all sequences of work tasks of the robot within a specified period of time. A more realistic approach has been presented to model the problem using the robot joint space. The problem is formulated as a nonlinear optimization problem and solved using Sequential Quadratic Programming algorithm.
Abstract: The objective of the paper is to develop the forecast
model for the HW flows. The methodology of the research included
6 modules: historical data, assumptions, choose of indicators, data
processing, and data analysis with STATGRAPHICS, and forecast
models. The proposed methodology was validated for the case study
for Latvia. Hypothesis on the changes in HW for time period of
2010-2020 have been developed and mathematically described with
confidence level of 95.0% and 50.0%. Sensitivity analysis for the
analyzed scenarios was done. The results show that the growth of
GDP affects the total amount of HW in the country. The total amount
of the HW is projected to be within the corridor of – 27.7% in the
optimistic scenario up to +87.8% in the pessimistic scenario with
confidence level of 50.0% for period of 2010-2020. The optimistic
scenario has shown to be the least flexible to the changes in the GDP
growth.
Abstract: Cloud computing is becoming more and more matured over the last few years and consequently the demands for better cloud services is increasing rapidly. One of the research topics to improve cloud services is the desktop computing in virtualized environment. This paper aims at the development of an adaptive virtual desktop service in cloud computing platform based on our previous research on the virtualization technology. We implement cloud virtual desktop and application software streaming technology that make it possible for providing Virtual Desktop as a Service (VDaaS). Given the development of remote desktop virtualization, it allows shifting the user’s desktop from the traditional PC environment to the cloud-enabled environment, which is stored on a remote virtual machine rather than locally. This proposed effort has the potential to positively provide an efficient, resilience and elastic environment for online cloud service. Users no longer need to burden the platform maintenances and drastically reduces the overall cost of hardware and software licenses. Moreover, this flexible remote desktop service represents the next significant step to the mobile workplace, and it lets users access their desktop environments from virtually anywhere.
Abstract: This paper describes a practical approach to design
and develop a hybrid learning with acceleration feedback control
(HLC) scheme for input tracking and end-point vibration suppression
of flexible manipulator systems. Initially, a collocated proportionalderivative
(PD) control scheme using hub-angle and hub-velocity
feedback is developed for control of rigid-body motion of the system.
This is then extended to incorporate a further hybrid control scheme
of the collocated PD control and iterative learning control with
acceleration feedback using genetic algorithms (GAs) to optimize the
learning parameters. Experimental results of the response of the
manipulator with the control schemes are presented in the time and
frequency domains. The performance of the HLC is assessed in terms
of input tracking, level of vibration reduction at resonance modes and
robustness with various payloads.
Abstract: The psychological and physical trauma associated with the loss of a human limb can severely impact on the quality of life of an amputee rendering even the most basic of tasks very difficult. A prosthetic device can be of great benefit to the amputee in the performance of everyday human tasks. This paper outlines a proposed mechanical design of a 12 degree-of-freedom SMA actuated artificial hand. It is proposed that the SMA wires be embedded intrinsically within the hand structure which will allow for significant flexibility for use either as a prosthetic hand solution, or as part of a complete lower arm prosthetic solution. A modular approach is taken in the design facilitating ease of manufacture and assembly, and more importantly, also allows the end user to easily replace SMA wires in the event of failure. A biomimetric approach has been taken during the design process meaning that the artificial hand should replicate that of a human hand as far as is possible with due regard to functional requirements. The proposed design has been exposed to appropriate loading through the use of finite element analysis (FEA) to ensure that it is structurally sound. Theoretical analysis of the mechanical framework was also carried out to establish the limits of the angular displacement and velocity of the finger tip as well finger tip force generation. A combination of various polymers and Titanium, which are suitably lightweight, are proposed for the manufacture of the design.
Abstract: An information procuring and processing emerging technology wireless sensor network (WSN) Consists of autonomous nodes with versatile devices underpinned by applications. Nodes are equipped with different capabilities such as sensing, computing, actuation and wireless communications etc. based on application requirements. A WSN application ranges from military implementation in the battlefield, environmental monitoring, health sector as well as emergency response of surveillance. The nodes are deployed independently to cooperatively monitor the physical and environmental conditions. The architecture of WSN differs based on the application requirements and focus on low cost, flexibility, fault tolerance capability, deployment process as well as conserve energy. In this paper we have present the characteristics, architecture design objective and architecture of WSN
Abstract: A method to predict the column size for displacement based design of reinforced concrete frame buildings with higher target inter storey drift is reported here. The column depth derived from empirical relation as a function of given beam section, target inter-story drift, building plan features and common displacement based design parameters is used. Regarding the high drift requirement, a minimum column-beam moment capacity ratio is maintained during capacity design. The method is used in designing four, eight and twelve story frame buildings with displacement based design for three percent target inter storey drift. Non linear time history analysis of the designed buildings are performed under five artificial ground motions to show that the columns are found elastic enough to avoid column sway mechanism assuring that for the design the column size can be used with or without minor changes.
Abstract: Since supply chains highly impact the financial
performance of companies, it is important to optimize and analyze
their Key Performance Indicators (KPI). The synergistic combination
of Particle Swarm Optimization (PSO) and Monte Carlo simulation is
applied to determine the optimal reorder point of warehouses in
supply chains. The goal of the optimization is the minimization of the
objective function calculated as the linear combination of holding and
order costs. The required values of service levels of the warehouses
represent non-linear constraints in the PSO. The results illustrate that
the developed stochastic simulator and optimization tool is flexible
enough to handle complex situations.
Abstract: This article provides partial evaluation index and its
standard of sports aerobics, including the following 12 indexes: health
vitality, coordination, flexibility, accuracy, pace, endurance, elasticity,
self-confidence, form, control, uniformity and musicality. The
three-layer BP artificial neural network model including input layer,
hidden layer and output layer is established. The result shows that the
model can well reflect the non-linear relationship between the
performance of 12 indexes and the overall performance. The predicted
value of each sample is very close to the true value, with a relative
error fluctuating around of 5%, and the network training is successful.
It shows that BP network has high prediction accuracy and good
generalization capacity if being applied in sports aerobics performance
evaluation after effective training.
Abstract: Hand gesture is one of the typical methods used in
sign language for non-verbal communication. It is most commonly
used by people who have hearing or speech problems to
communicate among themselves or with normal people. Various sign
language systems have been developed by manufacturers around the
globe but they are neither flexible nor cost-effective for the end
users. This paper presents a system prototype that is able to
automatically recognize sign language to help normal people to
communicate more effectively with the hearing or speech impaired
people. The Sign to Voice system prototype, S2V, was developed
using Feed Forward Neural Network for two-sequence signs
detection. Different sets of universal hand gestures were captured
from video camera and utilized to train the neural network for
classification purpose. The experimental results have shown that
neural network has achieved satisfactory result for sign-to-voice
translation.
Abstract: Business Process Modeling (BPM) is the first and
most important step in business process management lifecycle. Graph
based formalism and rule based formalism are the two most
predominant formalisms on which process modeling languages are
developed. BPM technology continues to face challenges in coping
with dynamic business environments where requirements and goals
are constantly changing at the execution time. Graph based
formalisms incur problems to react to dynamic changes in Business
Process (BP) at the runtime instances. In this research, an adaptive
and flexible framework based on the integration between Object
Oriented diagramming technique and Petri Net modeling language is
proposed in order to support change management techniques for
BPM and increase the representation capability for Object Oriented
modeling for the dynamic changes in the runtime instances. The
proposed framework is applied in a higher education environment to
achieve flexible, updatable and dynamic BP.
Abstract: In this work, we present an automatic vehicle detection
system for airborne videos using combined features. We propose a
pixel-wise classification method for vehicle detection using Dynamic
Bayesian Networks. In spite of performing pixel-wise classification,
relations among neighboring pixels in a region are preserved in the
feature extraction process. The main novelty of the detection scheme is
that the extracted combined features comprise not only pixel-level
information but also region-level information. Afterwards, tracking is
performed on the detected vehicles. Tracking is performed using
efficient Kalman filter with dynamic particle sampling. Experiments
were conducted on a wide variety of airborne videos. We do not
assume prior information of camera heights, orientation, and target
object sizes in the proposed framework. The results demonstrate
flexibility and good generalization abilities of the proposed method on
a challenging dataset.
Abstract: As product life cycle becomes less and less every day,
having flexible manufacturing processes for any companies seems more demanding. In the assembling of closures, i.e. opening parts in
car body, hemming process is the one which needs more attention. This paper focused on the robot roller hemming process and how to
reduce its cycle time by introducing a fast roller hemming process. A
robot roller hemming process of a tailgate of Saab 93 SportCombi
model is investigated as a case study in this paper. By applying task
separation, robot coordination, and robot cell configuration principles in the roller hemming process, three alternatives are
proposed, developed, and remarkable reduction in cycle times achieved [1].
Abstract: To support user mobility for a wireless network new mechanisms are needed and are fundamental, such as paging, location updating, routing, and handover. Also an important key feature is mobile QoS offered by the WATM. Several ATM network protocols should be updated to implement mobility management and to maintain the already ATM QoS over wireless ATM networks. A survey of the various schemes and types of handover is provided. Handover procedure allows guarantee the terminal connection reestablishment when it moves between areas covered by different base stations. It is useful to satisfy user radio link transfer without interrupting a connection. However, failure to offer efficient solutions will result in handover important packet loss, severe delays and degradation of QoS offered to the applications. This paper reviews the requirements, characteristics and open issues of wireless ATM, particularly with regard to handover. It introduces key aspects of WATM and mobility extensions, which are added in the fixed ATM network. We propose a flexible approach for handover management that will minimize the QoS deterioration. Functional entities of this flexible approach are discussed in order to achieve minimum impact on the connection quality when a MT crosses the BS.
Abstract: Optical character recognition of cursive scripts
presents a number of challenging problems in both segmentation and
recognition processes in different languages, including Persian. In
order to overcome these problems, we use a newly developed Persian
word segmentation method and a recognition-based segmentation
technique to overcome its segmentation problems. This method is
robust as well as flexible. It also increases the system-s tolerances to
font variations. The implementation results of this method on a
comprehensive database show a high degree of accuracy which meets
the requirements for commercial use. Extended with a suitable pre
and post-processing, the method offers a simple and fast framework
to develop a full OCR system.
Abstract: In the last decade digital watermarking procedures have
become increasingly applied to implement the copyright protection
of multimedia digital contents distributed on the Internet. To this
end, it is worth noting that a lot of watermarking procedures
for images and videos proposed in literature are based on spread
spectrum techniques. However, some scepticism about the robustness
and security of such watermarking procedures has arisen because
of some documented attacks which claim to render the inserted
watermarks undetectable. On the other hand, web content providers
wish to exploit watermarking procedures characterized by flexible and
efficient implementations and which can be easily integrated in their
existing web services frameworks or platforms. This paper presents
how a simple spread spectrum watermarking procedure for MPEG-2
videos can be modified to be exploited in web contexts. To this end,
the proposed procedure has been made secure and robust against some
well-known and dangerous attacks. Furthermore, its basic scheme
has been optimized by making the insertion procedure adaptive with
respect to the terminals used to open the videos and the network transactions
carried out to deliver them to buyers. Finally, two different
implementations of the procedure have been developed: the former
is a high performance parallel implementation, whereas the latter is
a portable Java and XML based implementation. Thus, the paper
demonstrates that a simple spread spectrum watermarking procedure,
with limited and appropriate modifications to the embedding scheme,
can still represent a valid alternative to many other well-known and
more recent watermarking procedures proposed in literature.
Abstract: Organizations face challenges supporting knowledge
workers due to their particular requirements for an environment
supportive of their self-guided learning activities which are important
to increase their productivity and to develop creative solutions to
non-routine problems. Face-to-face knowledge sharing remains
crucial in spite of a large number of knowledge management
instruments that aim at supporting a more impersonal transfer of
knowledge. This paper first describes the main criteria for a
conceptual and technical solution targeted at flexible management of
office space that aims at assigning those knowledge workers to the
same room that are most likely to thrive when being brought together
thus enhancing their knowledge work productivity. The paper
reflects on lessons learned from the implementation and operation of
such a solution in a project-focused organization and derives several
implications for future extensions that target to foster problem
solving, informal learning and personal development.
Abstract: This paper features the proposed modeling and design
of a Robust Decentralized Periodic Output Feedback (RDPOF)
control technique for the active vibration control of smart flexible
multimodel Euler-Bernoulli cantilever beams for a multivariable
(MIMO) case by retaining the first 6 vibratory modes. The beam
structure is modeled in state space form using the concept of
piezoelectric theory, the Euler-Bernoulli beam theory and the Finite
Element Method (FEM) technique by dividing the beam into 4 finite
elements and placing the piezoelectric sensor / actuator at two finite
element locations (positions 2 and 4) as collocated pairs, i.e., as
surface mounted sensor / actuator, thus giving rise to a multivariable
model of the smart structure plant with two inputs and two outputs.
Five such multivariable models are obtained by varying the
dimensions (aspect ratios) of the aluminum beam, thus giving rise to
a multimodel of the smart structure system. Using model order
reduction technique, the reduced order model of the higher order
system is obtained based on dominant eigen value retention and the
method of Davison. RDPOF controllers are designed for the above 5
multivariable-multimodel plant. The closed loop responses with the
RDPOF feedback gain and the magnitudes of the control input are
observed and the performance of the proposed multimodel smart
structure system with the controller is evaluated for vibration control.