Abstract: One problem in evaluating recent computational models of human category learning is that there is no standardized method for systematically comparing the models' assumptions or hypotheses. In the present study, a flexible general model (called GECLE) is introduced that can be used as a framework to systematically manipulate and compare the effects and descriptive validities of a limited number of assumptions at a time. Two example simulation studies are presented to show how the GECLE framework can be useful in the field of human high-order cognition research.
Abstract: This paper presents a systematic approach for designing Unified Power Flow Controller (UPFC) based supplementary damping controllers for damping low frequency oscillations in a single-machine infinite-bus power system. Detailed investigations have been carried out considering the four alternatives UPFC based damping controller namely modulating index of series inverter (mB), modulating index of shunt inverter (mE), phase angle of series inverter (δB ) and phase angle of the shunt inverter (δE ). The design problem of the proposed controllers is formulated as an optimization problem and Real- Coded Genetic Algorithm (RCGA) is employed to optimize damping controller parameters. Simulation results are presented and compared with a conventional method of tuning the damping controller parameters to show the effectiveness and robustness of the proposed design approach.
Abstract: This paper presents an alternate approach that uses
artificial neural network to simulate the flood level dynamics in a
river basin. The algorithm was developed in a decision support
system environment in order to enable users to process the data. The
decision support system is found to be useful due to its interactive
nature, flexibility in approach and evolving graphical feature and can
be adopted for any similar situation to predict the flood level. The
main data processing includes the gauging station selection, input
generation, lead-time selection/generation, and length of prediction.
This program enables users to process the flood level data, to
train/test the model using various inputs and to visualize results. The
program code consists of a set of files, which can as well be modified
to match other purposes. This program may also serve as a tool for
real-time flood monitoring and process control. The running results
indicate that the decision support system applied to the flood level
seems to have reached encouraging results for the river basin under
examination. The comparison of the model predictions with the
observed data was satisfactory, where the model is able to forecast
the flood level up to 5 hours in advance with reasonable prediction
accuracy. Finally, this program may also serve as a tool for real-time
flood monitoring and process control.
Abstract: This paper deals with the problem of non-uniform
torsion in thin-walled elastic beams with asymmetric cross-section,
removing the basic concept of a fixed center of twist, necessary in the
Vlasov-s and Benscoter-s theories to obtain a warping stress field
equivalent to zero. In this new torsion/flexure theory, despite of the
classical ones, the warping function will punctually satisfy the first
indefinite equilibrium equation along the beam axis and it wont- be
necessary to introduce the classical congruence condition, to take into
account the effect of the beam restraints. The solution, based on the
Fourier development of the displacement field, is obtained assuming
that the applied external torque is constant along the beam axis and
on both beam ends the unit twist angle and the warping axial
displacement functions are totally restrained.
Finally, in order to verify the feasibility of the proposed method
and to compare it with the classical theories, two applications are
carried out. The first one, relative to an open profile, is necessary to
test the numerical method adopted to find the solution; the second
one, instead, is relative to a simplified containership section,
considered as full restrained in correspondence of two adjacent
transverse bulkheads.
Abstract: FlexRay, as a communication protocol for automotive
control systems, is developed to fulfill the increasing demand on the
electronic control units for implementing systems with higher safety
and more comfort. In this work, we study the impact of
radiation-induced soft errors on FlexRay-based steer-by-wire system.
We injected the soft errors into general purpose register set of FlexRay
nodes to identify the most critical registers, the failure modes of the
steer-by-wire system, and measure the probability distribution of
failure modes when an error occurs in the register file.
Abstract: In this paper, a mathematical model for data object replication in ad hoc networks is formulated. The derived model is general, flexible and adaptable to cater for various applications in ad hoc networks. We propose a game theoretical technique in which players (mobile hosts) continuously compete in a non-cooperative environment to improve data accessibility by replicating data objects. The technique incorporates the access frequency from mobile hosts to each data object, the status of the network connectivity, and communication costs. The proposed technique is extensively evaluated against four well-known ad hoc network replica allocation methods. The experimental results reveal that the proposed approach outperforms the four techniques in both the execution time and solution quality
Abstract: In most study fields, a phenomenon may not be
studied directly but it will be examined indirectly by phenomenon
model. Making an accurate model of system, there is attained new
information from modeled phenomenon without any charge, danger,
etc... there have been developed more solutions for describing and
analyzing the recent complicated systems but few of them have
analyzed the performance in the range of system description. Petri
nets are of limited solutions which may make such union. Petri nets
are being applied in problems related to modeling and designing the
systems. Theory of Petri nets allow a system to model
mathematically by a Petri net and analyzing the Petri net can then
determine main information of modeled system-s structure and
dynamic. This information can be used for assessing the performance
of systems and suggesting corrections in the system. In this paper,
beside the introduction of Petri nets, a real case study will be studied
in order to show the application of generalized stochastic Petri nets in
modeling a resource sharing production system and evaluating the
efficiency of its machines and robots. The modeling tool used here is
SHARP software which calculates specific indicators helping to
make decision.
Abstract: An effort to develop a unit commitment approach
capable of handling large power systems consisting of both thermal
and hydro generating units offers a large profitable return. In order to
be feasible, the method to be developed must be flexible, efficient
and reliable. In this paper, various proposed methods have been
described along with their strengths and weaknesses. As all of these
methods have some sort of weaknesses, a comprehensive algorithm
that combines the strengths of different methods and overcomes each
other-s weaknesses would be a suitable approach for solving
industry-grade unit commitment problem.
Abstract: Trust management is one of the drawbacks in Peer-to-Peer (P2P) system. Lack of centralized control makes it difficult to control the behavior of the peers. Reputation system is one approach to provide trust assessment in P2P system. In this paper, we use fuzzy logic to model trust in a P2P environment. Our trust model combines first-hand (direct experience) and second-hand (reputation)information to allow peers to represent and reason with uncertainty regarding other peers' trustworthiness. Fuzzy logic can help in handling the imprecise nature and uncertainty of trust. Linguistic labels are used to enable peers assign a trust level intuitively. Our fuzzy trust model is flexible such that inference rules are used to weight first-hand and second-hand accordingly.
Abstract: The relation between taxation states and foreign direct
investment has been studied for several perspectives and with states
of different levels of development. Usually it's only considered the
impact of tax level on the foreign direct investment volume. This
paper enhances this view by assuming that multinationals companies
(MNC) can use transfer prices systems and have got investment
timing flexibility. Thus, it evaluates the impact of the use of
international transfer pricing systems on the states- policy and on the
investment timing of the multinational companies. In uncertain
business environments (with periodical release of news), the
investment can increase if MNC detain investment delay options.
This paper shows how tax differentials can attract foreign direct
investments (FDI) and influence MNC behavior. The equilibrium is
set in a global environment where MNC can shift their profits
between states depending on the corporate tax rates. Assuming the
use of transfer pricing schemes, this paper confirms the relationship
between MNC behavior and the release of new business news.
Abstract: Medical compression bandages are widely used in the
treatment of chronic venous disorder. In order to design effective
compression bandages, researchers have attempted to describe the
interface pressure applied by multi-layer bandages using mathematical
models. This paper reports on the work carried out to
compare and validate the mathematical models used to describe the
interface pressure applied by multi-layer bandages. Both analytical
and experimental results showed that using simple multiplication
of a number of bandage layers with the pressure applied by one
layer of bandage or ignoring the increase in the limb radius due to
former layers of bandage will result in overestimating the pressure.
Experimental results showed that the mathematical models, which
take into consideration the increase in the limb radius due to former
bandage layers, are more accurate than the one which does not.
Abstract: In this paper, based on steady-state models of Flexible
AC Transmission System (FACTS) devices, the sizing of static
synchronous series compensator (SSSC) controllers in transmission
network is formed as an optimization problem. The objective of this
problem is to reduce the transmission losses in the network. The
optimization problem is solved using particle swarm optimization
(PSO) technique. The Newton-Raphson load flow algorithm is
modified to consider the insertion of the SSSC devices in the
network. A numerical example, illustrating the effectiveness of the
proposed algorithm, is introduced. In addition, a novel model of a 3-
phase voltage source converter (VSC) that is suitable for series
connected FACTS a controller is introduced. The model is verified
by simulation using Power System Blockset (PSB) and Simulink
software.
Abstract: Near-infrared (NIR) spectroscopy is a widely used
method for material identification for laboratory and industrial applications.
While standard spectrometers only allow measurements at
one sampling point at a time, NIR Spectral Imaging techniques can
measure, in real-time, both the size and shape of an object as well as
identify the material the object is made of. The online classification
and sorting of recovered paper with NIR Spectral Imaging (SI)
is used with success in the paper recycling industry throughout
Europe. Recently, the globalisation of the recycling material streams
caused that water-based flexographic-printed newspapers mainly from
UK and Italy appear also in central Europe. These flexo-printed
newspapers are not sufficiently de-inkable with the standard de-inking
process originally developed for offset-printed paper. This de-inking
process removes the ink from recovered paper and is the fundamental
processing step to produce high-quality paper from recovered paper.
Thus, the flexo-printed newspapers are a growing problem for the
recycling industry as they reduce the quality of the produced paper
if their amount exceeds a certain limit within the recovered paper
material.
This paper presents the results of a research project for the
development of an automated entry inspection system for recovered
paper that was jointly conducted by CTR AG (Austria) and PTS
Papiertechnische Stiftung (Germany). Within the project an NIR
SI prototype for the identification of flexo-printed newspaper has
been developed. The prototype can identify and sort out flexoprinted
newspapers in real-time and achieves a detection accuracy
for flexo-printed newspaper of over 95%. NIR SI, the technology the
prototype is based on, allows the development of inspection systems
for incoming goods in a paper production facility as well as industrial
sorting systems for recovered paper in the recycling industry in the
near future.
Abstract: The binary phase-only filter digital watermarking
embeds the phase information of the discrete Fourier transform of the
image into the corresponding magnitudes for better image authentication.
The paper proposed an approach of how to implement watermark
embedding by quantizing the magnitude, with discussing how to
regulate the quantization steps based on the frequencies of the magnitude
coefficients of the embedded watermark, and how to embed the
watermark at low frequency quantization. The theoretical analysis and
simulation results show that algorithm flexibility, security, watermark
imperceptibility and detection performance of the binary phase-only
filter digital watermarking can be effectively improved with quantization
based watermark embedding, and the robustness against JPEG
compression will also be increased to some extent.
Abstract: This paper addresses the problem of recognizing and
interpreting the behavior of human workers in industrial
environments for the purpose of integrating humans in software
controlled manufacturing environments. In this work we propose a
generic concept in order to derive solutions for task-related manual
production applications. Thus, we are able to use a versatile concept
providing flexible components and being less restricted to a specific
problem or application. We instantiate our concept in a spot welding
scenario in which the behavior of a human worker is interpreted
when performing a welding task with a hand welding gun. We
acquire signals from inertial sensors, video cameras and triggers and
recognize atomic actions by using pose data from a marker based
video tracking system and movement data from inertial sensors.
Recognized atomic actions are analyzed on a higher evaluation level
by a finite state machine.
Abstract: This paper presents data annotation models at
five levels of granularity (database, relation, column, tuple, and cell) of relational data to address the problem of unsuitability of most relational databases to express annotations. These models
do not require any structural and schematic changes to the
underlying database. These models are also flexible, extensible,
customizable, database-neutral, and platform-independent. This paper also presents an SQL-like query language, named Annotation Query Language (AnQL), to query annotation documents. AnQL is simple to understand and exploits the already-existent wide knowledge and skill set of SQL.
Abstract: This article explores the self-identity of the Kazakh
people by way of identifying the roots of self-understanding in
Kazakh culture. Unfortunately, Western methods of ethno
psychology cannot fully capture what is unique about identity in
Kazakh culture. Although Kazakhstan is the ninth largest country in
terms of geographical space, Kazakh cultural identity is not wellknown
in the West. In this article we offer an account of the national
psychological features of the Kazakh people, in order to reveal the
spiritual, mental, ethical dimensions of modern Kazakhs. These
factors play a central role in the revival of forms of identity that are
central to the Kazakh people.
Abstract: The development of distributed systems has been affected by the need to accommodate an increasing degree of flexibility, adaptability, and autonomy. The Mobile Agent technology is emerging as an alternative to build a smart generation of highly distributed systems. In this work, we investigate the performance aspect of agent-based technologies for information retrieval. We present a comparative performance evaluation model of Mobile Agents versus Remote Method Invocation by means of an analytical approach. We demonstrate the effectiveness of mobile agents for dynamic code deployment and remote data processing by reducing total latency and at the same time producing minimum network traffic. We argue that exploiting agent-based technologies significantly enhances the performance of distributed systems in the domain of information retrieval.
Abstract: New advancement of technology and never satisfying demands of the civilization are putting huge pressure on the natural fuel resources and these resources are at a constant threat to its sustainability. To get the best out of the automobile, the optimum balance between performance and fuel economy is important. In the present state of art, either of the above two aspects are taken into mind while designing and development process which puts the other in the loss as increase in fuel economy leads to decrement in performance and vice-versa. In-depth observation of the vehicle dynamics apparently shows that large amount of energy is lost during braking and likewise large amount of fuel is consumed to reclaim the initial state, this leads to lower fuel efficiency to gain the same performance. Current use of Kinetic Energy Recovery System is only limited to sports vehicles only because of the higher cost of this system. They are also temporary in nature as power can be squeezed only during a small time duration and use of superior parts leads to high cost, which results on concentration on performance only and neglecting the fuel economy. In this paper Kinetic Energy Recovery System for storing the power and then using the same while accelerating has been discussed. The major storing element in this system is a Flat Spiral Spring that will store energy by compression and torsion.
The use of spring ensure the permanent storage of energy until used by the driver unlike present mechanical regeneration system in which the energy stored decreases with time and is eventually lost. A combination of internal gears and spur gears will be used in order to make the energy release uniform which will lead to safe usage. The system can be used to improve the fuel efficiency by assisting in overcoming the vehicle’s inertia after braking or to provide instant acceleration whenever required by the driver. The performance characteristics of the system including response time, mechanical efficiency and overall increase in efficiency are demonstrated. This technology makes the KERS (Kinetic Energy Recovery System) more flexible and economical allowing specific application while at the same time increasing the time frame and ease of usage.
Abstract: The current paper presents the findings of a research
study on learners- barriers and motivators engaged into blended
programs in a workplace context. In this study, the participants were
randomly assigned to one of four parallel e-learning courses, each of
which was delivered using a different learning strategy. Data were
collected through web-based and telephone surveys developed by the
researchers. The results showed that vague instruction, time
management, and insufficient feedback were the top-most barriers to
blended learning. The major motivators for blended learning included
content relevance, flexibility in time, and the ability to work at own
pace.