Abstract: To create a solution for a specific problem in machine
learning, the solution is constructed from the data or by use a search
method. Genetic algorithms are a model of machine learning that can
be used to find nearest optimal solution. While the great advantage of
genetic algorithms is the fact that they find a solution through
evolution, this is also the biggest disadvantage. Evolution is inductive,
in nature life does not evolve towards a good solution but it evolves
away from bad circumstances. This can cause a species to evolve into
an evolutionary dead end. In order to reduce the effect of this
disadvantage we propose a new a learning tool (criteria) which can be
included into the genetic algorithms generations to compare the
previous population and the current population and then decide
whether is effective to continue with the previous population or the
current population, the proposed learning tool is called as Keeping
Efficient Population (KEP). We applied a GA based on KEP to the
production line layout problem, as a result KEP keep the evaluation
direction increases and stops any deviation in the evaluation.
Abstract: An attempt has been made to develop a
seminumerical model to study temperature variations in dermal
layers of human limbs. The model has been developed for two
dimensional steady state case. The human limb has been assumed to
have elliptical cross section. The dermal region has been divided
into three natural layers namely epidermis, dermis and subdermal
tissues. The model incorporates the effect of important physiological
parameters like blood mass flow rate, metabolic heat generation, and
thermal conductivity of the tissues. The outer surface of the limb is
exposed to the environment and it is assumed that heat loss takes
place at the outer surface by conduction, convection, radiation, and
evaporation. The temperature of inner core of the limb also varies at
the lower atmospheric temperature. Appropriate boundary conditions
have been framed based on the physical conditions of the problem.
Cubic splines approach has been employed along radial direction and
Fourier series along angular direction to obtain the solution. The
numerical results have been computed for different values of
eccentricity resembling with the elliptic cross section of the human
limbs. The numerical results have been used to obtain the
temperature profile and to study the relationships among the various
physiological parameters.
Abstract: Water samples were collected from river Pandu at six
stations where human and animal activities were high. Composite
samples were analyzed for dissolved oxygen (DO), biochemical
oxygen demand (BOD), chemical oxygen demand (COD) , pH values
during dry and wet seasons as well as the harmattan period. The total
data points were used to establish relationships between the
parameters and data were also subjected to statistical analysis and
expressed as mean ± standard error of mean (SEM) at a level of
significance of p
Abstract: IFP Group Technology “Sulfrex process" was used in
Iran-s South Pars Gas Complex Refineries for removing sulfur
compounds such as mercaptans, carbonyl sulfide and hydrogen
sulfide, which uses sulfonated cobalt phthalocyanine dispersed in
alkaline solution as catalyst. In this technology, catalyst and alkaline
solution were used circularly. However the stability of catalyst due to
effect of some parameters would reduce with the running of the unit
and therefore sweetening efficiency would be decreased. Hence, the
aim of this research is study the factors effecting on the stability of
catalyst.
Abstract: Precast concrete has been widely adopted in public
housing construction of Hong Kong since the mid-1980s. While
pre-casting is considered an environmental friendly solution, there is
lack of study to investigate the life cycle performance of precast
concrete units. This study aims to bridge the knowledge gap by
providing a comprehensive life cycle assessment (LCA) study for two
precast elements namely façade and bathroom. The results show that
raw material is the most significant contributor of environmental
impact accounting for about 90% to the total impact. Furthermore,
human health is more affected by the production of precast concrete
than the ecosystems.
Abstract: The problem of incompressible steady flow simulation around an airfoil is discussed. For some simplest airfoils (circular, elliptical, Zhukovsky airfoils) the exact solution is known from complex analysis. It allows to compute the intensity of vortex layer which simulates the airfoil. Some modifications of the vortex element method are proposed and test computations are carried out. It-s shown that the these approaches are much more effective in comparison with the classical numerical scheme.
Abstract: In the present analysis an unsteady laminar
forced convection water boundary layer flow is considered.
The fluid properties such as viscosity and Prandtl number are
taken as variables such that those are inversely proportional to
temperature. By using quasi-linearization technique the nonlinear
coupled partial differential equations are linearized and
the numerical solutions are obtained by using implicit finite
difference scheme with the appropriate selection of step sizes.
Non-similar solutions have been obtained from the starting
point of the stream-wise coordinate to the point where skin
friction value vanishes. The effect non-uniform mass transfer
along the surface of the cylinder through slot is studied on the
skin friction and heat transfer coefficients.
Abstract: The development incompatible with environment cannot be sustainable. Using renewable energy sources such as solar energy, geothermal energy and wind energy can make sustainable development in a region. Iran has a lot of renewable and nonrenewable energy resources. Since Iran has a special geographic position, it has lot of solar and wind energy resources. Both solar and wind energy are free, renewable and adaptable with environment. The study of 10 year wind data in Iranian South coastal and Islands synoptic stations shows that the production of wind power electricity and water pumping is possible in this region. In this research, we studied the local and temporal distribution of wind using three – hour statistics of windspeed in Iranian South coastal and Islands synoptic stations. This research shows that the production of wind power electricity is possible in this region all the year.
Abstract: The purpose of this paper is to analyze determinants of
information security affecting adoption of the Web-based integrated
information systems (IIS). We introduced Web-based information
systems which are designed to formulate strategic plans for Peruvian
government. Theoretical model is proposed to test impact of
organizational factors (deterrent efforts and severity; preventive
efforts) and individual factors (information security threat; security
awareness) on intentions to proactively use the Web-based IIS .Our
empirical study results highlight that deterrent efforts and deterrent
severity have no significant influence on the proactive use intentions
of IIS, whereas, preventive efforts play an important role in proactive
use intentions of IIS. Thus, we suggest that organizations need to do
preventive efforts by introducing various information security
solutions, and try to improve information security awareness while
reducing the perceived information security threats.
Abstract: One of the most attractive and important field of chaos theory is control of chaos. In this paper, we try to present a simple framework for chaotic motion control using the feedback linearization method. Using this approach, we derive a strategy, which can be easily applied to the other chaotic systems. This task presents two novel results: the desired periodic orbit need not be a solution of the original dynamics and the other is the robustness of response against parameter variations. The illustrated simulations show the ability of these. In addition, by a comparison between a conventional state feedback and our proposed method it is demonstrated that the introduced technique is more efficient.
Abstract: Com Poisson distribution is capable of modeling the count responses irrespective of their mean variance relation and the parameters of this distribution when fitted to a simple cross sectional data can be efficiently estimated using maximum likelihood (ML) method. In the regression setup, however, ML estimation of the parameters of the Com Poisson based generalized linear model is computationally intensive. In this paper, we propose to use quasilikelihood (QL) approach to estimate the effect of the covariates on the Com Poisson counts and investigate the performance of this method with respect to the ML method. QL estimates are consistent and almost as efficient as ML estimates. The simulation studies show that the efficiency loss in the estimation of all the parameters using QL approach as compared to ML approach is quite negligible, whereas QL approach is lesser involving than ML approach.
Abstract: In medical therapy, laser has been widely used to conduct cosmetic, tumor and other treatments. During the process of laser irradiation, there may be thermal damage caused by excessive laser exposure. Thus, the establishment of a complete thermal analysis model is clinically helpful to physicians in reference data. In this study, porcine liver in place of tissue was subjected to laser irradiation to set up the experimental data considering the explored impact on surface thermal field and thermal damage region under different conditions of power, laser irradiation time, and distance between laser and porcine liver. In the experimental process, the surface temperature distribution of the porcine lever was measured by the infrared thermal imager. In the part of simulation, the bio heat transfer Pennes-s equation was solved by software SYSWELD applying in welding process. The double ellipsoid function as a laser source term is firstly considered in the prediction for surface thermal field and internal tissue damage. The simulation results are compared with the experimental data to validate the mathematical model established here in.
Abstract: In this paper, we establish existence and uniqueness of
solutions for a class of inverse problems of degenerate differential
equations. The main tool is the perturbation theory for linear operators.
Abstract: The advent of modern technology shadows its impetus repercussions on successful Legacy systems making them obsolete with time. These systems have evolved the large organizations in major problems in terms of new business requirements, response time, financial depreciation and maintenance. Major difficulty is due to constant system evolution and incomplete, inconsistent and obsolete documents which a legacy system tends to have. The myriad dimensions of these systems can only be explored by incorporating reverse engineering, in this context, is the best method to extract useful artifacts and by exploring these artifacts for reengineering existing legacy systems to meet new requirements of organizations. A case study is conducted on six different type of software systems having source code in different programming languages using the architectural recovery framework.
Abstract: Program slicing is the task of finding all statements in a program that directly or indirectly influence the value of a variable occurrence. The set of statements that can affect the value of a variable at some point in a program is called a program slice. In several software engineering applications, such as program debugging and measuring program cohesion and parallelism, several slices are computed at different program points. In this paper, algorithms are introduced to compute all backward and forward static slices of a computer program by traversing the program representation graph once. The program representation graph used in this paper is called Program Dependence Graph (PDG). We have conducted an experimental comparison study using 25 software modules to show the effectiveness of the introduced algorithm for computing all backward static slices over single-point slicing approaches in computing the parallelism and functional cohesion of program modules. The effectiveness of the algorithm is measured in terms of time execution and number of traversed PDG edges. The comparison study results indicate that using the introduced algorithm considerably saves the slicing time and effort required to measure module parallelism and functional cohesion.
Abstract: Aggression is a behavior that cannot be approved by
the society. Vandalism which is aggression towards objects is an
action that tends to damage public or personal property. The
behaviors that are described as vandalism can often be observed in
the schools as well. According to Zwier and Vaughan (1)
previous research about the reasons of and precautionary measures
for vandalism in schools can be grouped in three tendency categories:
conservative, liberal and radical. In this context, the main aim of this
study is to discover which ideological tendency of the reasons of
school vandalism is adopted by the teachers and what are their
physical, environmental, school system and societal solutions for
vandalism. A total of 200 teachers participated in this study, and the
mean age was 34.20 years (SD = 6.54). The sample was made up of
109 females and 91 males. For the analysis of the data, SPSS 15.00,
frequency, percentage, and t-test were used. The research showed
that the teachers have tendencies in the order of conservative, liberal
and radical for the reasons of vandalism. The research also showed
that the teachers do not have any tendency for eliminating vandalism
physically and general solutions on the level of society; on the other
hand they mostly adopt a conservative tendency in terms of
precautions against vandalism in the school system. Second most,
they adopt the liberal tendency in terms of precautions against
vandalism in the school system. . It is observed that the findings of
this study are comparable to the existing literature on the subject.
Future studies should be conducted with multiple variants and
bigger sampling.
Abstract: Smoke discharging is a main reason of air pollution
problem from industrial plants. The obstacle of a building has an
affect with the air pollutant discharge. In this research, a mathematical
model of the smoke dispersion from two sources and one source with
a structural obstacle is considered. The governing equation of the
model is an isothermal mass transfer model in a viscous fluid. The
finite element method is used to approximate the solutions of the
model. The triangular linear elements have been used for discretising
the domain, and time integration has been carried out by semi-implicit
finite difference method. The simulations of smoke dispersion in
cases of one chimney and two chimneys are presented. The maximum
calculated smoke concentration of both cases are compared. It is then
used to make the decision for smoke discharging and air pollutant
control problems on industrial area.
Abstract: We present here the results for a comparative study of
some techniques, available in the literature, related to the relevance
feedback mechanism in the case of a short-term learning. Only one
method among those considered here is belonging to the data mining
field which is the K-nearest neighbors algorithm (KNN) while the
rest of the methods is related purely to the information retrieval field
and they fall under the purview of the following three major axes:
Shifting query, Feature Weighting and the optimization of the
parameters of similarity metric. As a contribution, and in addition to
the comparative purpose, we propose a new version of the KNN
algorithm referred to as an incremental KNN which is distinct from
the original version in the sense that besides the influence of the
seeds, the rate of the actual target image is influenced also by the
images already rated. The results presented here have been obtained
after experiments conducted on the Wang database for one iteration
and utilizing color moments on the RGB space. This compact
descriptor, Color Moments, is adequate for the efficiency purposes
needed in the case of interactive systems. The results obtained allow
us to claim that the proposed algorithm proves good results; it even
outperforms a wide range of techniques available in the literature.
Abstract: In this paper, a solution is presented for a robotic
manipulation problem in industrial settings. The problem is sensing
objects on a conveyor belt, identifying the target, planning and
tracking an interception trajectory between end effector and the
target. Such a problem could be formulated as combining object
recognition, tracking and interception. For this purpose, we integrated
a vision system to the manipulation system and employed tracking
algorithms. The control approach is implemented on a real industrial
manipulation setting, which consists of a conveyor belt, objects
moving on it, a robotic manipulator, and a visual sensor above the
conveyor. The trjectory for robotic interception at a rendezvous point
on the conveyor belt is analytically calculated. Test results show that
tracking the raget along this trajectory results in interception and
grabbing of the target object.
Abstract: In this contribution an innovative platform is being
presented that integrates intelligent agents in legacy e-learning environments. It introduces the design and development of a scalable
and interoperable integration platform supporting various assessment agents for e-learning environments. The agents are implemented in
order to provide intelligent assessment services to computational intelligent techniques such as Bayesian Networks and Genetic
Algorithms. The utilization of new and emerging technologies like web services allows integrating the provided services to any web
based legacy e-learning environment.