Abstract: Water pipe network is installed underground and once equipped, it is difficult to recognize the state of pipes when the leak or burst happens. Accordingly, post management is often delayed
after the fault occurs. Therefore, the systematic fault management system of water pipe network is required to prevent the accident and
minimize the loss. In this work, we develop online fault detection system of water pipe network using data of pipes such as flow rate
or pressure. The transient model describing water flow in pipelines
is presented and simulated using MATLAB. The fault situations such
as the leak or burst can be also simulated and flow rate or pressure data when the fault happens are collected. Faults are detected using
statistical methods of fast Fourier transform and discrete wavelet transform, and they are compared to find which method shows the
better fault detection performance.
Abstract: Cities denote instantaneously a challenge and an
opportunity for climate change policy. Cities are the place where
most energy services are needed because urbanization is closely
linked to high population densities and concentration of economic
activities and production (Urban energy demand). Consequently, it is
critical to explain about the role of cities within the world-s energy
systems and its correlation with the climate change issue. With more
than half of the world-s population already living in urban areas, and
that percentage expected to rise to 75 per cent by 2050, it is clear that
the path to sustainable development must pass through cities. Cities
expanding in size and population pose increased challenges to the
environment, of which energy is part as a natural resource, and to the
quality of life. Nowadays, most cities have already understood the
importance of sustainability, both at their local scale as in terms of
their contribution to sustainability at higher geographical scales. It
requires the perception of a city as a complex and dynamic
ecosystem, an open system, or cluster of systems, where the energy
as well as the other natural resources is transformed to satisfy the
needs of the different urban activities. In fact, buildings and
transportation generally represent most of cities direct energy
demand, i.e., between 60 per cent and 80 per cent of the overall
consumption. Buildings, both residential and services are usually
influenced by the local physical and social conditions. In terms of
transport, the energy demand is also strongly linked with the specific
characteristics of a city (urban mobility).The concept of a “smart
city" builds on statistics as seven key axes of a city-s success in
moving towards common platform (brain nerve)of sustainable urban
energy systems.
With the aforesaid knowledge, the authors have suggested a frame
work to role of cities, as energy actors for smart city management.
The authors have discusses the potential elements needed for energy
in smart cities and also identified potential energy actions and
relevant barriers. Furthermore, three levels of city smartness in cities
actions to overcome market /institutional failures with a local
approach are distinguished. The authors have made an attempt to
conceive and implement concepts of city smartness by adopting the
city or local government as nerve center through an integrated
planning approach. Finally, concluding with recommendations for
the organization of the Smart Sustainable Cities for positive changes
of urban India.
Abstract: Micro electromechanical sensors (MEMS) play a vital
role along with global positioning devices in navigation of
autonomous vehicles .These sensors are low cost ,easily available but
depict colored noises and unpredictable discontinuities .Conventional
filters like Kalman filters and Sigma point filters are not able to cope
with nonwhite noises. This research has utilized H∞ filter in nonlinear
frame work both with Kalman filter and Unscented filter for
navigation and self alignment of an airborne vehicle. The system is
simulated for colored noises and discontinuities and results are
compared with not robust nonlinear filters. The results are found
40%-70% more robust against colored noises and discontinuities.
Abstract: This paper discusses on the use of Spline Interpolation
and Mean Square Error (MSE) as tools to process data acquired from
the developed simulator that shall replicate sea bed logging environment.
Sea bed logging (SBL) is a new technique that uses marine
controlled source electromagnetic (CSEM) sounding technique and is
proven to be very successful in detecting and characterizing hydrocarbon
reservoirs in deep water area by using resistivity contrasts. It uses
very low frequency of 0.1Hz to 10 Hz to obtain greater wavelength.
In this work the in house built simulator was used and was provided
with predefined parameters and the transmitted frequency was varied
for sediment thickness of 1000m to 4000m for environment with and
without hydrocarbon. From series of simulations, synthetics data were
generated. These data were interpolated using Spline interpolation
technique (degree of three) and mean square error (MSE) were
calculated between original data and interpolated data. Comparisons
were made by studying the trends and relationship between frequency
and sediment thickness based on the MSE calculated. It was found
that the MSE was on increasing trends in the set up that has the
presence of hydrocarbon in the setting than the one without. The MSE
was also on decreasing trends as sediment thickness was increased
and with higher transmitted frequency.
Abstract: Optical 1x12 fused-taper-twisted polymer optical fiber (POF) couplers has been fabricated by a perform technique. Characterization of the coupler which proposed to be used in passive night vision application to tracking a blind sport area was reported. During the development process of fused-taper-twisted POF couplers was carried out, red LED fully utilized to be injected into the couplers to test the quality of fabricated couplers. Some characterization parameters, such as optical output power, POFs attenuation characteristics and power losses on the network were observed. The maximum output power efficiency of the coupler is about 40%, but it can be improved gradually through experience and practice.
Abstract: With the turn of this century, many researchers
started showing interest in Embedded Firewall (EF) implementations.
These are not the usual firewalls that are used as checkpoints at network gateways. They are, rather, applied near those hosts that need protection. Hence by using them, individual or grouped network
components can be protected from the inside as well as from external attacks.
This paper presents a study of EF-s, looking at their architecture and problems. A comparative study assesses how practical each kind is. It particularly focuses on the architecture, weak points, and
portability of each kind. A look at their use by different categories of users is also presented.
Abstract: The mitigation of crop loss due to damaging freezes
requires accurate air temperature prediction models. Previous work
established that the Ward-style artificial neural network (ANN) is a
suitable tool for developing such models. The current research
focused on developing ANN models with reduced average prediction
error by increasing the number of distinct observations used in
training, adding additional input terms that describe the date of an
observation, increasing the duration of prior weather data included in
each observation, and reexamining the number of hidden nodes used
in the network. Models were created to predict air temperature at
hourly intervals from one to 12 hours ahead. Each ANN model,
consisting of a network architecture and set of associated parameters,
was evaluated by instantiating and training 30 networks and
calculating the mean absolute error (MAE) of the resulting networks
for some set of input patterns. The inclusion of seasonal input terms,
up to 24 hours of prior weather information, and a larger number of
processing nodes were some of the improvements that reduced
average prediction error compared to previous research across all
horizons. For example, the four-hour MAE of 1.40°C was 0.20°C, or
12.5%, less than the previous model. Prediction MAEs eight and 12
hours ahead improved by 0.17°C and 0.16°C, respectively,
improvements of 7.4% and 5.9% over the existing model at these
horizons. Networks instantiating the same model but with different
initial random weights often led to different prediction errors. These
results strongly suggest that ANN model developers should consider
instantiating and training multiple networks with different initial
weights to establish preferred model parameters.
Abstract: The Brazilian Agricultural Products Wholesale Market fits well as example of residues generating system, reaching 750 metric tons per month of total residues, from which 600 metric tons are organic material and 150 metric tons are recyclable materials. Organic material is basically composed of fruit, vegetables and flowers leftovers from the products commercialization. The recyclable compounds are generate from packing material employed in the commercialization process. This research work devoted efforts in carrying quantitative analysis of the residues generated in the agricultural enterprise at its final destination. Data survey followed the directions implemented by the Residues Management Program issued by the agricultural enterprise. It was noticed from that analysis the necessity of changing the logistics applied to the recyclable material collecting process. However, composting process was elected as the organic compounds destination which is considered adequate for a material composed of significant percentage of organic matter far higher than wood, cardboard and plastics contents.
Abstract: There is a growing interest in the food industry and in preventive health care for the development and evaluation of natural antioxidants from medicinal plant materials. In the present work, extracts of three medicinal plants (Tilia argentea, Crataegi folium leaves and Polygonum bistorta roots) used in Turkish phytotheraphy were screened for their phenolic profiles and antioxidant properties. Crude extracts were obtained from different parts of plants, by solidliquid extraction with pure water, 70% acetone and 70% methanol aqueous solvents. The antioxidant activity of the extracts was determined by ABTS.+ radical cation scavenging activity. The Folin Ciocalteu procedure was used to assess the total phenolic concentrations of the extracts as gallic acid equivalents. A modified liquid chromatography-electro spray ionization-mass spectrometry (LC-ESI-MS) was used to obtain chromatographic profiles of the phenolic compounds in the medicinal plants. The predominant phenolic compounds detected in different extracts of the plants were catechin, protocatechuic and chlorogenic acids. The highest phenolic contents were obtained by using 70% acetone as aqueous solvent, whereas the lowest phenolic contents were obtained by water extraction due to Folin Ciocalteu results. The results indicate that acetone extracts of Tilia argentea had the highest antioxidant capacity as free ABTS radical scavengers. The lowest phenolic contents and antioxidant capacities were obtained from Polygonum bistorta root extracts.
Abstract: One of the methods for detecting the target position
error in the laser tracking systems is using Four Quadrant (4Q)
detectors. If the coordinates of the target center is yielded through the
usual relations of the detector outputs, the results will be nonlinear,
dependent on the shape, target size and its position on the detector
screen. In this paper we have designed an algorithm with using
neural network that coordinates of the target center in laser tracking
systems is calculated by using detector outputs obtained from visual
modeling. With this method, the results except from the part related
to the detector intrinsic limitation, are linear and dependent from the
shape and target size.
Abstract: More and more natural disasters are happening every
year: floods, earthquakes, volcanic eruptions, etc. In order to reduce
the risk of possible damages, governments all around the world are
investing into development of Early Warning Systems (EWS) for
environmental applications. The most important task of the EWS is
identification of the onset of critical situations affecting environment
and population, early enough to inform the authorities and general
public. This paper describes an approach for monitoring of flood
protections systems based on machine learning methods. An
Artificial Intelligence (AI) component has been developed for
detection of abnormal dike behaviour. The AI module has been
integrated into an EWS platform of the UrbanFlood project (EU
Seventh Framework Programme) and validated on real-time
measurements from the sensors installed in a dike.
Abstract: Insider abuse has recently been reported as one of
the more frequently occurring security incidents, suggesting that
more security is required for detecting and preventing unauthorised
financial transactions entered by authorised users. To address the
problem, and based on the observation that all authorised interbanking
financial transactions trigger or are triggered by other
transactions in a workflow, we have developed a security solution
based on a redefined understanding of an audit workflow. One audit
workflow where there is a log file containing the complete workflow
activity of financial transactions directly related to one financial
transaction (an electronic deal recorded at an e-trading system). The
new security solution contemplates any two parties interacting on
the basis of financial transactions recorded by their users in related
but distinct automated financial systems. In the new definition interorganizational
and intra-organization interactions can be described
in one unique audit trail. This concept expands the current ideas of
audit trails by adapting them to actual e-trading workflow activity, i.e.
intra-organizational and inter-organizational activity. With the above,
a security auditing service is designed to detect integrity drifts with
and between organizations in order to detect unauthorised financial
transactions entered by authorised users.
Abstract: In the various working field, vibration may cause injurious to human body. Especially, in case of the vibration which is constantly and repeatedly transferred to the human. That gives serious physical problem, so called, Reynaud phenomenon. In this paper, we propose a vibration transmissibility reduction module with flexure mechanism for personal tools. At first, we select a target personal tool, grass cutter, and measure the level of vibration transmissibility on the hand. And then, we develop the concept design of the module that has stiffness for reduction the vibration transmissibility more than 20%, where the vibration transmissibility is measured with an accelerometer. In addition, the vibration reduction can be enhanced when the interior gap between inner and outer body is filled with silicone gel. This will be verified by the further experiment.
Abstract: There are many views on how human decision makers behave. In this work, the Justices of the United States Supreme Court will be viewed in terms of constrained maximization and cognitivecybernetic theory. This paper will integrate research in such fields as law, political science, psychology, economics and decision making theory. It will be argued that due to its heavy workload, the Supreme Court is forced to make decisions in a boundedly rational manner. The ideas and theory put forward here will be tested in the area of the Court’s decisions involving religion. Therefore, the cases involving the U.S. Constitution’s Free Exercise Clause and Establishment Clause will be analyzed. Also, variables such as the U.S. government’s involvement in these cases will be considered. The years to be studied will be 1987-2011.
Abstract: Equal Channel Angular Pressing (ECAP) is currently
being widely investigated because of its potential to produce ultrafine
grained microstructures in metals and alloys. A sound
knowledge of the plastic deformation and strain distribution is
necessary for understanding the relationships between strain
inhomogeneity and die geometry. Considerable research has been
reported on finite element analysis of this process, assuming threedimensional
plane strain condition. However, the two-dimensional
models are not suitable due to the geometry of the dies, especially in
cylindrical ones. In the present work, three-dimensional simulation of
ECAP process was carried out for six outer corner radii (sharp to 10
mm in steps of 2 mm), with channel angle 105¶Çü▒, for strain hardening
aluminium alloy (AA 6101) using ABAQUS/Standard software.
Strain inhomogeneity is presented and discussed for all cases. Pattern
of strain variation along selected radial lines in the body of the workpiece
is presented. It is found from the results that the outer corner
has a significant influence on the strain distribution in the body of
work-piece. Based on inhomogeneity and average strain criteria,
there is an optimum outer corner radius.
Abstract: This study discusses the stumbling blocks stifling the
adoption of GPS technology in the public sector of Pakistan. This
study has been carried out in order to describe the value of GPS
technology and its adoption at various public sector organisations in
Pakistan. Sample size for the research conducted was 200; personnel
working in public sector having age above 29 years were surveyed.
Data collected for this research has been quantitatively analysed with
the help of SPSS. Regression analysis, correlation and cross
tabulation were the techniques used to determine the strength of
relationship between key variables. Findings of this research indicate
that main hurdles in GPS adoption in the public sector of Pakistan are
lack of awareness about GPS among masses in general and the
stakeholders in particular, lack of initiative on part of government in
promoting new technologies, unavailability of GPS infrastructure in
Pakistan and prohibitions on map availability because of security
reasons.
Abstract: Architecture education was based on apprenticeship
models and its nature has not changed much during long period but
the Source of changes was its evaluation process and system. It is
undeniable that art and architecture education is completely based on
transmitting knowledge from instructor to students. In contrast to
other majors this transmitting is by iteration and practice and studio
masters try to control the design process and improving skills in the
form of supervision and criticizing. Also the evaluation will end by
giving marks to students- achievements. Therefore the importance of
the evaluation and assessment role is obvious and it is not irrelevant
to say that if we want to know about the architecture education
system, we must first study its assessment procedures. The evolution
of these changes in western countries has literate and documented
well. However it seems that this procedure has unregarded in
Malaysia and there is a severe lack of research and documentation in
this area. Malaysia as an under developing and multicultural country
which is involved different races and cultures is a proper origin for
scrutinizing and understanding the evaluation systems and
acceptability amount of current implemented models to keep the
evaluation and assessment procedure abreast with needs of different
generations, cultures and even genders. This paper attempts to
answer the questions of how evaluation and assessments are
performed and how students perceive this evaluation system in the
context Malaysia. The main advantage of this work is that it
contributes in international debate on evaluation model.
Abstract: During last decades, worldwide researchers dedicated
efforts to develop machine-based seismic Early Warning systems,
aiming at reducing the huge human losses and economic damages.
The elaboration time of seismic waveforms is to be reduced in order
to increase the time interval available for the activation of safety
measures. This paper suggests a Data Mining model able to correctly
and quickly estimate dangerousness of the running seismic event.
Several thousand seismic recordings of Japanese and Italian
earthquakes were analyzed and a model was obtained by means of a
Bayesian Network (BN), which was tested just over the first
recordings of seismic events in order to reduce the decision time and
the test results were very satisfactory.
The model was integrated within an Early Warning System
prototype able to collect and elaborate data from a seismic sensor
network, estimate the dangerousness of the running earthquake and
take the decision of activating the warning promptly.
Abstract: Super resolution (SR) technologies are now being
applied to video to improve resolution. Some TV sets are now
equipped with SR functions. However, it is not known if super
resolution image reconstruction (SRR) for TV really works or not.
Super resolution with non-linear signal processing (SRNL) has
recently been proposed. SRR and SRNL are the only methods for
processing video signals in real time. The results from subjective
assessments of SSR and SRNL are described in this paper. SRR video
was produced in simulations with quarter precision motion vectors and
100 iterations. These are ideal conditions for SRR. We found that the
image quality of SRNL is better than that of SRR even though SRR
was processed under ideal conditions.
Abstract: As the latest advancement and trend in IT field, Green
& Smart IT has attracted more and more attentions from researchers.
This study focuses on the development of assessing tools which can be
used for evaluating Green & Smart IT level within an organization. In
order to achieve meaningful results, a comprehensive review of
relevant literature was performed in advance, then, Delphi survey and
other processes were also employed to develop the assessment tools
for Green & Smart IT level. Two rounds of Delphi questionnaire
survey were conducted with 20 IT experts in public sector. The results
reveal that the top five weighted KPIs to evaluate maturity of Green &
Smart IT were: (1) electronic execution of business process; (2)
shutdown of unused IT devices; (3) virtualization of severs; (4)
automation of constant temperature and humidity; and (5) introduction
of smart-work system. Finally, these tools were applied to case study
of a public research institute in Korea. The findings presented in this
study provide organizations with useful implications for the
introduction and promotion of Green & Smart IT in the future