Abstract: Paints are the most widely used methods of protection
against atmospheric corrosion of metals. The aim of this work was to
determine the protective performance of epoxy coating against sea
water before and after damage.
Investigations are conducted using stationary and non-stationary
electrochemical tools such as electrochemical impedance
spectroscopy has allowed us to characterize the protective qualities of
these films. The application of the EIS on our damaged in-situ
painting shows the existence of several capacitive loops which is an
indicator of the failure of our tested paint. Microscopic analysis
(micrograph) helped bring essential elements in understanding the
degradation of our paint condition and immersion training corrosion
products.
Abstract: This paper presents two techniques, local feature
extraction using image spectrum and low frequency spectrum
modelling using GMM to capture the underlying statistical
information to improve the performance of face recognition
system. Local spectrum features are extracted using overlap sub
block window that are mapped on the face image. For each of this
block, spatial domain is transformed to frequency domain using
DFT. A low frequency coefficient is preserved by discarding high
frequency coefficients by applying rectangular mask on the
spectrum of the facial image. Low frequency information is non-
Gaussian in the feature space and by using combination of several
Gaussian functions that has different statistical properties, the best
feature representation can be modelled using probability density
function. The recognition process is performed using maximum
likelihood value computed using pre-calculated GMM components.
The method is tested using FERET datasets and is able to achieved
92% recognition rates.
Abstract: Pedagogy has always been open to other disciplines
that reflect about the educational process (philosophy, sociology,
psychology, anthropology, technology, etc.). Its interdisciplinary
openness puts education, as the subject of pedagogy within a broader
context of the community, enabling the knowledge of other
disciplines to contribute to a better understanding of the fundamental
pedagogical notion of education. The purpose of pedagogy as a
science serves humans, strives towards humans, must be for humans,
and this is its ultimate goal. Humans are essentially dependent on
education, which is also considered as a category of humans’ being,
because through education an entire world develops in humans.
Anthropological assumptions of humans as "deficient beings" see the
solution in education, but they also indicate a wealth of shortcomings,
because they provide an opportunity for enrichment and formation of
culture, living and the self. In that context, this paper illustrates the
determination of pedagogy through an anthropological conception of
humans and the phenomenon of education. It presents a review of
anthropological ideas about education, by providing an analysis of
relevant literature dealing with the anthropological notion of humans,
which provides fruitful conditions for a pedagogical reconsideration
of education.
Abstract: Presently, it is necessary to ensure the sustainable
development of passenger and freight transport. Increasing
performance of road freight has had a negative impact to environment
and society. It is therefore necessary to increase the competitiveness
of intermodal transport, which is more environmentally friendly. The
study describes the effectiveness of logistical centers realization for
companies and society and research how the partial internalization of
external costs reflected in the efficient use of these centers and
increase the competitiveness of intermodal transport to road freight.
In our research, we use the method of comparative analysis and
market research to describe the advantages of logistic centers for their
users as well as for society as a whole. Method normal costing is used
for calculation infrastructure and total costs, method of conversion
costing for determine the external costs. We modelled total society
costs for road freight transport and inter modal transport chain (we
assumed that most of the traffic is carried by rail) with different
loading schemes for condition in the Slovak Republic. Our research
has shown that higher utilization of inter modal transport chain do
good not only for society, but for companies providing freight
services too. Increase in use of inter modal transport chain can bring
many benefits to society that do not bring direct immediate financial
return. They often bring the multiplier effects, such as greater use of
environmentally friendly transport mode and reduce the total society
costs.
Abstract: This paper describes the problem of building secure
computational services for encrypted information in the Cloud
Computing without decrypting the encrypted data; therefore, it meets
the yearning of computational encryption algorithmic aspiration
model that could enhance the security of big data for privacy,
confidentiality, availability of the users. The cryptographic model
applied for the computational process of the encrypted data is the
Fully Homomorphic Encryption Scheme. We contribute a theoretical
presentations in a high-level computational processes that are based
on number theory and algebra that can easily be integrated and
leveraged in the Cloud computing with detail theoretic mathematical
concepts to the fully homomorphic encryption models. This
contribution enhances the full implementation of big data analytics
based cryptographic security algorithm.
Abstract: The traditional Turkish houses becoming unusable are
a result of the deterioration of the balanced interaction between users
and house (human and house) continuing during the history.
Especially depending upon the change in social structure, the houses
becoming neglected do not meet the desires of the users and do not
have the meaning but the shelter are becoming unusable and are
being destroyed.
A conservation policy should be developed and renovations should
be made in order to pass the traditional houses carrying the quality of
a cultural and historical document presenting the social structure, the
lifestyle and the traditions of its own age to the next generations and
to keep them alive.
Abstract: The characteristics of temperature distribution and
electric field in a natural rubber glove (NRG) using microwave
energy during microwave heating process are investigated
numerically and experimentally. A three-dimensional model of NRG
and microwave oven are considered in this work. The influences of
position, heating time and rotation angle of NRG on temperature
distribution and electric field are presented in details. The coupled
equations of electromagnetic wave propagation and heat transfer are
solved using the finite element method (FEM). The numerical model
is validated with an experimental study at a frequency of 2.45 GHz.
The results show that the numerical results closely match the
experimental results. Furthermore, it is found that the temperature
distribution and electric field increases with increasing heating time.
The hot spot zone appears in NRG at the tip of middle finger while
the maximum temperature occurs in case of rotation angle of NRG =
60 degree. This investigation provides the essential aspects for a
fundamental understanding of heat transport of NRG using
microwave energy in industry.
Abstract: Co metal supported on SiO2 and Al2O3 catalysts with
a metal loading varied from 30 of 70 wt.% were evaluated for
decomposition of methane to COx free hydrogen and carbon
nanomaterials. The catalytic runs were carried out from 550-800oC
under atmospheric pressure using fixed bed vertical flow reactor. The
fresh and spent catalysts were characterized by BET surface area
analyzer, XRD, SEM, TEM and TG analysis. The data showed that
50% Co/Al2O3 catalyst exhibited remarkable higher activity at 800oC
with respect to H2 production compared to rest of the catalysts.
However, the catalytic activity and durability was greatly declined at
higher temperature. The main reason for the catalytic inhibition of Co
containing SiO2 catalysts is the higher reduction temperature of
Co2SiO4. TEM images illustrate that the carbon materials with
various morphologies, carbon nanofibers (CNFs), helical-shaped
CNFs and branched CNFs depending on the catalyst composition and
reaction temperature were obtained.
Abstract: Lipases constitute one of the most important groups of
industrial enzymes that catalyze the hydrolysis of triacylglycerol to
glycerol and fatty acids. Muscarinic antagonist relieves smooth
muscle spasm of the gastrointestinal tract and effect on the
cardiovascular system. In this research the effect of a muscarinic
antagonist on the lipase activity of Pseudomonas aeruginosa was
studied. Lineweaver–Burk plot showed that the drug inhibited the
enzyme by competitive inhibition. The IC50 value (0.16 mM) and Ki
(0.03 mM) of the drug revealed the drug bound to enzyme with high
affinity. Determination of enzyme activity in various pH and
temperature showed that the maximum activity of lipase was at pH 8
and 60oC both in presence and absence of the drug.
Abstract: In this study, several crossplots of the P-impedance
with the lithology logs (gamma ray, neutron porosity, deep resistivity,
water saturation and Vp/Vs curves) were made in three available
wells, which were drilled in central part of the Blue Nile basin in
depths varies from 1460m to 1600m. These crossplots were
successful to discriminate between sand and shale when using PImpedance
values, and between the wet sand and the pay sand when
using both P-impedance and Vp/Vs together. Also some impedance
sections were converted to porosity sections using linear formula to
characterize the reservoir in terms of porosity. The used crossplots
were created on log resolution, while the seismic resolution can
identify only the reservoir, unless a 3D seismic angle stacks were
available; then it would be easier to identify the pay sand with great
confidence; through high resolution seismic inversion and
geostatistical approach when using P-impedance and Vp/Vs volumes.
Abstract: The objective of this study was to evaluate the
physical and chemical characteristics of Serra da Estrela cheese and
compare these results with those of the sensory analysis. For the
study were taken six samples of Serra da Estrela cheese produced
with 6 different ecotypes of thistle in a dairy situated in Penalva do
Castelo. The chemical properties evaluated were moisture content,
protein, fat, ash, chloride and pH; the physical properties studied
were color and texture; and finally a sensory evaluation was
undertaken. The results showed moisture varying in the range 40-
48%, protein in the range 15-20%, fat between 41-45%, ash between
3.9-5.0% and chlorides varying from 1.2 to 3.0%. The pH varied
from 4.8 to 5.4. The textural properties revealed that the crust
hardness is relatively low (maximum 7.3 N), although greater than
flesh firmness (maximum 1.7 N), and also that these cheeses are in
fact soft paste type, with measurable stickiness and intense
adhesiveness. The color analysis showed that the crust is relatively
light (L* over 50), and with a predominant yellow coloration (b*
around 20 or over) although with a slight greenish tone (a* negative).
The results of the sensory analysis did not show great variability for
most of the attributes measured, although some differences were
found in attributes such as crust thickness, crust uniformity, and
creamy flesh.
Abstract: Flours of wheat, chestnut, acorn and lupin were
evaluated in relation to phenolic compounds, antioxidant activity, and
oxalate content. At the chemical level the results show some
variability between samples by type of flour, and the sample of
chestnut flour presented the higher value of oxalate (0.00348
mg/100g) when compared to the other samples in the study.
Considering the content of phenolic compounds, the sample that
stood out was the acorn flour, having a high value of 0.812 g
AGE/100 g. All the samples presented intermediate content of
antioxidant activity and the sample that showed a slightly higher
value was the wheat flour with a value of 0.746 mM TRE/g sample.
Abstract: Emissions of atmospheric pollutants from ships and
harbour activities are a growing concern at international level given
their potential impacts on air quality and climate. These close-to-land
emissions have potential impact on local communities in terms of air
quality and health. Recent studies show that the impact of maritime
traffic to atmospheric particulate matter concentrations in several
coastal urban areas is comparable with the impact of road traffic of a
medium size town. However, several different approaches have been
used for these estimates making difficult a direct comparison of
results. In this work, an integrated approach based on emission
inventories and dedicated measurement campaigns has been applied
to give a comparable estimate of the impact of maritime traffic to
PM2.5 and particle number concentrations in three major harbours of
the Adriatic/Ionian Seas. The influences of local meteorology and of
the logistic layout of the harbours are discussed.
Abstract: This article deals with geographical conditions in
terrain and their effect on the movement of vehicles, their effect on
speed and safety of movement of people and vehicles. Finding of the
optimal routes outside the communication is studied in the Army
environment, but it occur in civilian as well, primarily in crisis
situation, or by the provision of assistance when natural disasters
such as floods, fires, storms etc., have happened. These movements
require the optimization of routes when effects of geographical
factors should be included. The most important factor is the surface
of a terrain. It is based on several geographical factors as are slopes,
soil conditions, micro-relief, a type of surface and meteorological
conditions. Their mutual impact has been given by coefficient of
deceleration. This coefficient can be used for the commander`s
decision. New approaches and methods of terrain testing,
mathematical computing, mathematical statistics or cartometric
investigation are necessary parts of this evaluation.
Abstract: Epidermal Growth Factor (EGF, Mw=6,045) has been
reported to have high efficiency of wound repair and anti-wrinkle
effect. However, the half-life of EGF in the body is too short to exert
the biological activity effectively when applied in free form. Growth
Factors can be stabilized by immobilization with carbohydrates from
thermal and proteolytic degradation. Low molecular weight chitosan
(LMCS) and its derivate prepared by hydrogen peroxide has high
solubility. LM6A6DC was successfully prepared as a reactive
carbohydrate for the stabilization of EGF by the reactions of LMCS
with alkalization, tosylation, azidation and reduction. The structure of
LM6A6DC was confirmed by FT-IR, 1H NMR and elementary
analysis. For enhancing the stability of free EGF, EGF was attached
with LM6A6DC by using water-soluble carbodiimide.
EGF-LM6A6DC conjugates did not show any cytotoxicity on the
Normal Human Dermal Fibroblast (NHDF) 3T3 proliferation at least
under 100 μg/ml. In the result, it was considered that LM6A6DC is
suitable to immobilize of growth factor.
Abstract: In this study, we compare the profiles of transitory
hybrid entrepreneurs and persistent hybrid entrepreneurs to determine
how they differ. Hybrid entrepreneurs (HEs) represent a significant
share of entrepreneurial activity yet little is known about them. We
define HEs as individuals who are active as entrepreneurs but do no
support themselves primarily by their enterprise. Persistent HEs
(PHEs) are not planning to transition to fulltime entrepreneurship
whereas transitory HEs (THEs) consider it probable. Our results
show that THEs and PHEs are quite similar in background. THEs are
more interested in increasing their turnover than PHEs, as expected,
but also emphasize self-fulfillment as a motive for entrepreneurship
more than PHEs. The clearest differences between THEs and PHEs
are found in their views on how well their immediate circle supports
full-time entrepreneurship, and their views of their own
entrepreneurial abilities and the market potential of their firm. Our
results support earlier arguments that hybrids should be considered
separately in research on entrepreneurial entry and self-employment.
Abstract: Surface modification and functionalization has been
an important tool for scientists in order to open new frontiers in
nanoscience and nanotechnology. Desired surface characteristics for
the intended applications can be achieved with surface
functionalization.
In this work, the effect of water soluble ligands on the adsorption
capabilities of silver nanoparticles onto AC which was synthesized
from German beech wood was investigated. Sodium borohydride
(NaBH4) and polyvinyl alcohol (PVA) were used as the ligands.
Silver nanoparticles with different surface coatings have average
sizes range from 10 to 13 nm. They were synthesized in aqueous
media by reducing Ag (I) ion in the presence of ligands. These
particles displayed adsorption tendencies towards AC when they
were mixed together and shaken in distilled water.
Silver nanoparticles (NaBH4-AgNPs) reduced and stabilized by
NaBH4 adsorbed onto AC with a homogenous dispersion of
aggregates with sizes in the range of 100-400 nm. Beside, silver
nanoparticles, which were prepared in the presence of both NaBH4
and PVA (NaBH4/PVA-Ag NPs), demonstrated that NaBH4/PVA-Ag
NPs adsorbed and dispersed homogenously but, they aggregated with
larger sizes on the AC surface (range from 300 to 600 nm). In
addition, desorption resistance of Ag nanoparticles were investigated
in distilled water. According to the results AgNPs were not desorbed
on the AC surface in distilled water.
Abstract: Over the past few years, the online multimedia
collection has grown at a fast pace. Several companies showed
interest to study the different ways to organise the amount of audio
information without the need of human intervention to generate
metadata. In the past few years, many applications have emerged on
the market which are capable of identifying a piece of music in a
short time. Different audio effects and degradation make it much
harder to identify the unknown piece. In this paper, an audio
fingerprinting system which makes use of a non-parametric based
algorithm is presented. Parametric analysis is also performed using
Gaussian Mixture Models (GMMs). The feature extraction methods
employed are the Mel Spectrum Coefficients and the MPEG-7 basic
descriptors. Bin numbers replaced the extracted feature coefficients
during the non-parametric modelling. The results show that nonparametric
analysis offer potential results as the ones mentioned in
the literature.
Abstract: Natural hydrocarbon seepage has helped petroleum
exploration as a direct indicator of gas and/or oil subsurface
accumulations. Surface macro-seeps are generally an indication of a
fault in an active Petroleum Seepage System belonging to a Total
Petroleum System. This paper describes a case study in which
multiple analytical techniques were used to identify and characterize
trace petroleum-related hydrocarbons and other volatile organic
compounds in groundwater samples collected from Sousse aquifer
(Central Tunisia). The analytical techniques used for analyses of
water samples included gas chromatography-mass spectrometry (GCMS),
capillary GC with flame-ionization detection, Compound
Specific Isotope Analysis, Rock Eval Pyrolysis. The objective of the
study was to confirm the presence of gasoline and other petroleum
products or other volatile organic pollutants in those samples in order
to assess the respective implication of each of the potentially
responsible parties to the contamination of the aquifer. In addition,
the degree of contamination at different depths in the aquifer was also
of interest. The oil and gas seeps have been investigated using
biomarker and stable carbon isotope analyses to perform oil-oil and
oil-source rock correlations. The seepage gases are characterized by
high CH4 content, very low δ13CCH4 values (-71,9 ‰) and high
C1/C1–5 ratios (0.95–1.0), light deuterium–hydrogen isotope ratios (-
198 ‰) and light δ13CC2 and δ13CCO2 values (-23,8‰ and-23,8‰
respectively) indicating a thermogenic origin with the contribution of
the biogenic gas. An organic geochemistry study was carried out on
the more ten oil seep samples. This study includes light hydrocarbon
and biomarkers analyses (hopanes, steranes, n-alkanes, acyclic
isoprenoids, and aromatic steroids) using GC and GC-MS. The
studied samples show at least two distinct families, suggesting two
different types of crude oil origins: the first oil seeps appears to be
highly mature, showing evidence of chemical and/or biological
degradation and was derived from a clay-rich source rock deposited
in suboxic conditions. It has been sourced mainly by the lower
Fahdene (Albian) source rocks. The second oil seeps was derived
from a carbonate-rich source rock deposited in anoxic conditions,
well correlated with the Bahloul (Cenomanian-Turonian) source rock.
Abstract: Today, the pollution due to non-degradable material
such as plastics, has led to studies about the development of
environmental-friendly material. Because of biodegradability
obtained from natural sources, polylactid acid (PLA) and ijuk fiber
are interesting to modify into a composite. This material is also
expected to reduce the impact of environmental pollution. Surface
modification of ijuk fiber through alkalinization with 0.25 M NaOH
solution for 30 minutes was aimed to enhance its compatibility to
PLA, in order to improve properties of the composite such as the
mechanical properties. Alkalinization of the ijuk fibers annihilates
some surface components such as lignin, wax and hemicelloluse, so
the pore on the surface clearly appeared, decreasing of the density
and diameter of the ijuk fibers. The change of the ijuk fiber properties
leads to increase the mechanical properties of PLA composites
reinforced the ijuk fibers through strengthening of the mechanical
interlocking with the PLA matrix. An addition to enhance the
distribution of the fibers in the PLA matrix, the stirring during DCM
solvent evaporation from the mixture of the ijuk fibers and the
dissolved-PLA can reduce amount of the trapped-voids and fibers
pull-out phenomena, which can decrease the mechanical properties of
the composite.