Abstract: The effect of different combinations of response
feedback on the performance of active control system on nonlinear
frames has been studied in this paper. To this end different feedback
combinations including displacement, velocity, acceleration and full
response feedback have been utilized in controlling the response of
an eight story bilinear hysteretic frame which has been subjected to a
white noise excitation and controlled by eight actuators which could
fully control the frame. For active control of nonlinear frame
Newmark nonlinear instantaneous optimal control algorithm has been
used which a diagonal matrix has been selected for weighting
matrices in performance index. For optimal design of active control
system while the objective has been to reduce the maximum drift to
below the yielding level, Distributed Genetic Algorithm (DGA) has
been used to determine the proper set of weighting matrices. The
criteria to assess the effect of each combination of response feedback
have been the minimum required control force to reduce the
maximum drift to below the yielding drift. The results of numerical
simulation show that the performance of active control system is
dependent on the type of response feedback where the velocity
feedback is more effective in designing optimal control system in
comparison with displacement and acceleration feedback. Also using
full feedback of response in controller design leads to minimum
control force amongst other combinations. Also the distributed
genetic algorithm shows acceptable convergence speed in solving the
optimization problem of designing active control systems.
Abstract: Within the last years, several technologies have been developed to help building e-learning portals. Most of them follow approaches that deliver a vast amount of functionalities, suitable for class-like learning. The SuGI project, as part of the D-Grid (funded by the BMBF), targets on delivering a highly scalable and sustainable learning solution to provide materials (e.g. learning modules, training systems, webcasts, tutorials, etc.) containing knowledge about Grid computing to the D-Grid community. In this article, the process of the development of an e-learning portal focused on the requirements of this special user group is described. Furthermore, it deals with the conceptual and technical design of an e-learning portal, addressing the special needs of heterogeneous target groups. The main focus lies on the quality management of the software development process, Web templates for uploading new contents, the rich search and filter functionalities which will be described from a conceptual as well as a technical point of view. Specifically, it points out best practices as well as concepts to provide a sustainable solution to a relatively unknown and highly heterogeneous community.
Abstract: The indoor airflow with a mixed natural/forced convection
was numerically calculated using the laminar and turbulent
approach. The Boussinesq approximation was considered for a simplification
of the mathematical model and calculations. The results
obtained, such as mean velocity fields, were successfully compared
with experimental PIV flow visualizations. The effect of the distance
between the cooled wall and the heat exchanger on the temperature
and velocity distributions was calculated. In a room with a simple
shape, the computational code OpenFOAM demonstrated an ability to
numerically predict flow patterns. Furthermore, numerical techniques,
boundary type conditions and the computational grid quality were
examined. Calculations using the turbulence model k-omega had a
significant effect on the results influencing temperature and velocity
distributions.
Abstract: This paper presents a simple approach for load
flow analysis of a radial distribution network. The proposed
approach utilizes forward and backward sweep algorithm
based on Kirchoff-s current law (KCL) and Kirchoff-s voltage
law (KVL) for evaluating the node voltages iteratively. In this
approach, computation of branch current depends only on the
current injected at the neighbouring node and the current in
the adjacent branch. This approach starts from the end nodes
of sub lateral line, lateral line and main line and moves
towards the root node during branch current computation. The
node voltage evaluation begins from the root node and moves
towards the nodes located at the far end of the main, lateral
and sub lateral lines. The proposed approach has been tested
using four radial distribution systems of different size and
configuration and found to be computationally efficient.
Abstract: An effective approach for unbalanced three-phase
distribution power flow solutions is proposed in this paper. The
special topological characteristics of distribution networks have been
fully utilized to make the direct solution possible. Two matrices–the
bus-injection to branch-current matrix and the branch-current to busvoltage
matrix– and a simple matrix multiplication are used to
obtain power flow solutions. Due to the distinctive solution
techniques of the proposed method, the time-consuming LU
decomposition and forward/backward substitution of the Jacobian
matrix or admittance matrix required in the traditional power flow
methods are no longer necessary. Therefore, the proposed method is
robust and time-efficient. Test results demonstrate the validity of the
proposed method. The proposed method shows great potential to be
used in distribution automation applications.
Abstract: Frequently a group of people jointly decide and authorize
a specific person as a representative in some business/poitical
occasions, e.g., the board of a company authorizes the chief executive
officer to close a multi-billion acquisition deal. In this paper, an
integrated proxy multi-signature scheme that allows anonymously
vetoable delegation is proposed. This protocol integrates mechanisms
of private veto, distributed proxy key generation, secure transmission
of proxy key, and existentially unforgeable proxy multi-signature
scheme. First, a provably secure Guillou-Quisquater proxy signature
scheme is presented, then the “zero-sharing" protocol is extended
over a composite modulus multiplicative group, and finally the above
two are combined to realize the GQ proxy multi-signature with
anonymously vetoable delegation. As a proxy signature scheme, this
protocol protects both the original signers and the proxy signer.
The modular design allows simplified implementation with less
communication overheads and better computation performance than
a general secure multi-party protocol.
Abstract: This paper describes the application of a model
predictive controller to the problem of batch reactor temperature
control. Although a great deal of work has been done to improve
reactor throughput using batch sequence control, the control of the
actual reactor temperature remains a difficult problem for many
operators of these processes. Temperature control is important as
many chemical reactions are sensitive to temperature for formation of
desired products. This controller consist of two part (1) a nonlinear
control method GLC (Global Linearizing Control) to create a linear
model of system and (2) a Model predictive controller used to obtain
optimal input control sequence. The temperature of reactor is tuned
to track a predetermined temperature trajectory that applied to the
batch reactor. To do so two input signals, electrical powers and the
flow of coolant in the coil are used. Simulation results show that the
proposed controller has a remarkable performance for tracking
reference trajectory while at the same time it is robust against noise
imposed to system output.
Abstract: Constant upgrading of Enterprise Resource Planning
(ERP) systems is necessary, but can cause new defects. This paper
attempts to model the likelihood of defects after completed upgrades
with Weibull defect probability density function (PDF). A case study
is presented analyzing data of recorded defects obtained for one ERP
subsystem. The trends are observed for the value of the parameters
relevant to the proposed statistical Weibull distribution for a given
one year period. As a result, the ability to predict the appearance of
defects after the next upgrade is described.
Abstract: This research aims to study value-creation process of
producing monk-s bowls, Thai traditional handicrafts, which is facing problems in adapting to the changing society. It also aims to identify
problems and obstacles to value creation. This research is based on a case study of monk-s bowl manufactures from Ban-Baat Village,
Bangkok. The conceptual framework is based on the model of value
chain to analyze the process.
The research methodology is qualitative. This research found that the value-creation process of monk-s bowls consists of eight
activities contributing to adding value to the products and increasing
profits to the producers in return. Five major problems and obstacles
are found.
The research suggests that these problems and obstacles limit the manufacturers- potential for creating more valued product and lead to business stagnation. These problems should be addressed and solved with collaboration among the government, the private sector and the
manufacturers.
Abstract: The paper attempts to contribute to the largely
neglected social and anthropological discussion of technology development on the one hand, and to redirecting the emphasis in
anthropology from primitive and exotic societies to problems of high
relevance in contemporary era and how technology is used in
everyday life. It draws upon multidimensional models of intelligence
and ideal type formation. It is argued that the predominance of
computational and cognitive cosmovisions have led to technology alienation. Injection of communicative competence in artificially
intelligent systems and identity technologies in the coming
information society are analyzed
Abstract: In this paper, an automatic guided mobile robot using a new magnetic position meter is described. In order to measure the lateral position of a mobile robot, a new magnetic position meter is developed. The magnetic position meter can detect the position of a magnetic wire on the center of road. A mobile robot in designed with a sensing system, a steering system and a driving system. The designed mobile robot is tested to verify the performance of automatic guidance.
Abstract: The present work is a numerical simulation of
nanofluids flow in a double pipe heat exchanger provided with
porous baffles. The hot nanofluid flows in the inner cylinder, whereas
the cold nanofluid circulates in the annular gap. The Darcy-
Brinkman-Forchheimer model is adopted to describe the flow in the
porous regions, and the governing equations with the appropriate
boundary conditions are solved by the finite volume method. The
results reveal that the addition of metallic nanoparticles enhances the
rate of heat transfer in comparison to conventional fluids but this
augmentation is accompanied by an increase in pressure drop. The
highest heat exchanger performances are obtained when
nanoparticles are added only to the cold fluid.
Abstract: The aim of this study was to investigate the influence
of reaction temperature and wheat straw moisture content on the
pyrolysis product yields, in the temperature range of 475-575 °C.
Samples of straw with moisture contents from 1.5 wt % to 15.0 wt %
were fed to a bench scale Pyrolysis Centrifuge Reactor (PCR). The
experimental results show that the changes in straw moisture content
have no significant effect on the distribution of pyrolysis product
yields. The maximum bio-oil yields approximately 60 (wt %, on dry
ash free feedstock basis) was observed around 525 °C - 550 °C for all
straw moisture levels. The water content in the wet straw bio-oil was
the highest. The heating value of bio-oil and solid char were
measured and the percentages of its energy distribution were
calculated. The energy distributions of bio-oil, char and gas were 56-
69 % 24-33 %, and 2-19 %, respectively.
Abstract: This paper presents the investigation results of UV
measurement at different level of altitudes and the development of a
new portable instrument for measuring UV. The rapid growth of
industrial sectors in developing countries including Malaysia, brings
not only income to the nation, but also causes pollution in various
forms. Air pollution is one of the significant contributors to global
warming by depleting the Ozone layer, which would reduce the
filtration of UV rays. Long duration of exposure to high to UV rays
has many devastating health effects to mankind directly or indirectly
through destruction of the natural resources. This study aimed to
show correlation between UV and altitudes which indirectly can help
predict Ozone depletion. An instrument had been designed to
measure and monitors the level of UV. The instrument comprises of
two main blocks namely data logger and Graphic User Interface
(GUI). Three sensors were used in the data logger to detect changes
in the temperature, humidity and ultraviolet. The system has
undergone experimental measurement to capture data at two different
conditions; industrial area and high attitude area. The performance of
the instrument showed consistency in the data captured and the
results of the experiment drew a significantly high reading of UV at
high altitudes.
Abstract: Acoustical properties of speech have been shown to
be related to mental states of speaker with symptoms: depression
and remission. This paper describes way to address the issue of
distinguishing depressed patients from remitted subjects based on
measureable acoustics change of their spoken sound. The vocal-tract
related frequency characteristics of speech samples from female
remitted and depressed patients were analyzed via speech
processing techniques and consequently, evaluated statistically by
cross-validation with Support Vector Machine. Our results
comparatively show the classifier's performance with effectively
correct separation of 93% determined from testing with the subjectbased
feature model and 88% from the frame-based model based on
the same speech samples collected from hospital visiting interview
sessions between patients and psychiatrists.
Abstract: In this study, a mathematical model was proposed and
the accuracy of this model was assessed to predict the growth of
Pseudomonas aeruginosa and rhamnolipid production under nitrogen
limiting (sodium nitrate) fed-batch fermentation. All of the
parameters used in this model were achieved individually without
using any data from the literature.
The overall growth kinetic of the strain was evaluated using a
dual-parallel substrate Monod equation which was described by
several batch experimental data. Fed-batch data under different
glycerol (as the sole carbon source, C/N=10) concentrations and feed
flow rates were used to describe the proposed fed-batch model and
other parameters. In order to verify the accuracy of the proposed
model several verification experiments were performed in a vast
range of initial glycerol concentrations. While the results showed an
acceptable prediction for rhamnolipid production (less than 10%
error), in case of biomass prediction the errors were less than 23%. It
was also found that the rhamnolipid production by P. aeruginosa was
more sensitive at low glycerol concentrations.
Based on the findings of this work, it was concluded that the
proposed model could effectively be employed for rhamnolipid
production by this strain under fed-batch fermentation on up to 80 g l-
1 glycerol.
Abstract: In the present work, the performance of the particle
swarm optimization and the genetic algorithm compared as a typical
geometry design problem. The design maximizes the heat transfer
rate from a given fin volume. The analysis presumes that a linear
temperature distribution along the fin. The fin profile generated using
the B-spline curves and controlled by the change of control point
coordinates. An inverse method applied to find the appropriate fin
geometry yield the linear temperature distribution along the fin
corresponds to optimum design. The numbers of the populations, the
count of iterations and time to convergence measure efficiency.
Results show that the particle swarm optimization is most efficient
for geometry optimization.
Abstract: Mitochondria are dynamic organelles, capable to
interact with each other. While the number of mitochondria in a cell
varies, their quality and functionality depends on the operation of
fusion, fission, motility and mitophagy. Nowadays, several
researches declare as an important factor in neurogenerative diseases
the disruptions in the regulation of mitochondrial dynamics. In this
paper a stochastic model in BioAmbients calculus is presented,
concerning mitochondrial fusion and its distribution in the renewal of
mitochondrial population in a cell. This model describes the
successive and dependent stages of protein synthesis, protein-s
activation and merging of two independent mitochondria.
Abstract: Vitamin A deficiency is a public health problem in
Zimbabwe. Addressing vitamin A deficiency has the potential of
enhancing resistance to disease and reducing mortality especially in
children less than 5 years. We implemented and adapted vitamin A
outreach supplementation strategy within the National Immunization
Days and Extended Programme of Immunization in a rural district in
Zimbabwe. Despite usual operational challenges faced this approach
enabled the district to increase delivery of supplementation coverage.
This paper describes the outreach strategy that was implemented in
the remote rural district. The strategy covered 63 outreach sites with
2 sites being covered per day and visited once per month for the
whole year. Coverage reached 71% in an area of previous coverage
rates of around less than 50%. We recommend further exploration of
this strategy by others working in similar circumstances. This
strategy can be a potential way for use by Scaling-Up-Nutrition
member states.
Abstract: An automated wood recognition system is designed to
classify tropical wood species.The wood features are extracted based
on two feature extractors: Basic Grey Level Aura Matrix (BGLAM)
technique and statistical properties of pores distribution (SPPD)
technique. Due to the nonlinearity of the tropical wood species
separation boundaries, a pre classification stage is proposed which
consists ofKmeans clusteringand kernel discriminant analysis (KDA).
Finally, Linear Discriminant Analysis (LDA) classifier and KNearest
Neighbour (KNN) are implemented for comparison purposes.
The study involves comparison of the system with and without pre
classification using KNN classifier and LDA classifier.The results
show that the inclusion of the pre classification stage has improved
the accuracy of both the LDA and KNN classifiers by more than
12%.