Abstract: In this paper, a thermal model of cast- resin dry type
transformer is proposed. The proposed thermal model is solved by
finite element technique to get the temperature at any location of the
transformer. The basic modes of heat transfer such as conduction;
convection and radiation are used to get the steady state temperature
distribution of the transformer. The predicted temperatures are
compared with experimental results reported in this paper and it is
found a good agreement between them. The effects of various
parameters such as width of air duct, ambient temperature and
emissivity of the outer surface were also studied.
Abstract: Separation of propylene-propane mixture using
immobilized liquid membrane was investigated. The effect of transmembrane
pressure and carrier concentration on membrane
separation performance was studied. It was observed that for 30:70
(vol. %) propylene-propane mixture, at pressure of 120kPa and
carrier concentration of 20wt. %, a separation factor of 474 was
obtained.
Abstract: Packing problems arise in a wide variety of application
areas. The basic problem is that of determining an efficient arrangement
of different objects in a region without any overlap and
with minimal wasted gap between shapes. This paper presents a
novel population based approach for optimizing arrangement of irregular
shapes. In this approach, each shape is coded as an agent and
the agents' reproductions and grouping policies results in arrangements
of the objects in positions with least wasted area between
them. The approach is implemented in an application for cutting
sheets and test results on several problems from literature are presented.
Abstract: This experiment was conducted to investigate the
effect of different levels of dietary chromium yeast (Cr-yeast) on
thigh meat quality of broiler chicks reared under heat stress
condition. Two hundred and forty Ross male chickens in heat stress
condition (33±3°C) were allocated to five treatments in a completely
randomized design. Treatments were supplemented with 0 (control),
200, 400, 800 and 1200 μg kg-1 Cr in the form of Cr yeast. Twelve
chicks from each treatment were slaughtered at 42 d, to evaluate
moisture, protein, lipid, pH and lipid oxidation of thigh meat.
Protein, moisture, lipid and pH of thigh meat were not affected by
supplemental Cr. Thigh meat lipid tended to decrease in broilers
received 1200 μg kg-1. Storage time increased lipid oxidation of
meat (P
Abstract: Transdermal delivery of ondansetron hydrochloride (OdHCl) can prevent the problems encountered with oral ondansetron. In previously conducted studies, effect of amount of polyvinyl pyrrolidone, permeation enhancer and casting solvent on the physicochemical properties on OdHCl were investigated. It is feasible to develop ondansetron transdermal patch by using ethyl cellulose and polyvinyl pyrrolidone with dibutyl pthalate as plasticizer, however, the desired flux is not achieved. The primary aim of this study is to use dimethyl succinate (DMS) and propylene glycol that are not incorporated in previous studies to determine their effect on the physicochemical properties of an OdHCl transdermal patch using ethyl cellulose and polyvinyl pyrrolidone. This study also investigates the effect of permeation enhancer (eugenol and phosphatidylcholine) on the release of OdHCl. The results showed that propylene glycol is a more suitable plasticizer compared to DMS in the fabrication of OdHCl transdermal patch using ethyl cellulose and polyvinyl pyrrolidone as polymers. Propylene glycol containing patch has optimum drug content, thickness, moisture content and water absorption, tensile strength, and a better release profile than DMS. Eugenol and phosphatidylcholine can increase release of OdHCl from the patches. From the physicochemical result and permeation profile, a combination of 350mg of ethyl cellulose, 150mg polyvinyl pyrrolidone, 3% of total polymer weight of eugenol, and 40% of total polymer weight of propylene glycol is the most suitable formulation to develop an OdHCl patch. OdHCl release did not increase with increasing the percentage of plasticiser. DMS 4, PG 4, DMS 9, PG 9, DMS 14, and PG 14 gave better release profiles where using 300mg: 0mg, 300mg: 100mg, and 350mg: 150mg of EC: PVP. Thus, 40% of PG or DMS appeared to be the optimum amount of plasticiser when the above combination where EC: PVP was used. It was concluded from the study that a patch formulation containing 350mg EC, 150mg PVP, 40% PG and 3% eugenol is the best transdermal matrix patch compositions for the uniform and continuous release/permeation of OdHCl over an extended period. This patch design can be used for further pharmacokinetic and pharmacodynamic studies in suitable animal models.
Abstract: This research studied the hypoglycemic effect of
water soluble polysaccharide (WSP) extracted from yam (Dioscorea
hispida) tuber by three different methods: aqueous extraction, papain
assisted extraction, and tempeh inoculums assisted extraction. The
two later extraction methods were aimed to remove WSP binding
protein to have more pure WSP. The hypoglycemic activities were
evaluated by means in vivo test on alloxan induced hyperglycemic
rats, glucose response test (GRT), in situ glucose absorption test
using everted sac, and short chain fatty acids (SCFAs) analysis. All
yam WSP extracts exhibited ability to decrease blood glucose level in
hyperglycemia condition as well as inhibited glucose absorption and
SCFA formation. The order of hypoglycemic activity was tempeh
inoculums assisted- >papain assisted- >aqueous WSP extracts. GRT
and in situ glucose absorption test showed that order of inhibition
was papain assisted- >tempeh inoculums assisted- >aqueous WSP
extracts. Digesta of caecum of yam WSP extracts oral fed rats had
more SCFA than control. Tempeh inoculums assisted WSP extract
exhibited the most significant hypoglycemic activity.
Abstract: The critical period for weed control (CPWC) is the period in the crop growth cycle during which weeds must be controlled to prevent unacceptable yield losses. Field studies were conducted in 2005 and 2006 in the University of Birjand at the south east of Iran to determine CPWC of corn using a randomized complete block design with 14 treatments and four replications. The treatments consisted of two different periods of weed interference, a critical weed-free period and a critical time of weed removal, were imposed at V3, V6, V9, V12, V15, and R1 (based on phonological stages of corn development) with a weedy check and a weed-free check. The CPWC was determined with the use of 2.5, 5, 10, 15 and 20% acceptable yield loss levels by non-linear Regression method and fitting Logistic and Gompertz nonlinear equations to relative yield data. The CPWC of corn was from 5- to 15-leaf stage (19-55 DAE) to prevent yield losses of 5%. This period to prevent yield losses of 2.5, 10 and 20% was 4- to 17-leaf stage (14-59 DAE), 6- to 12-leaf stage (25-47 DAE) and 8- to 9-leaf stage (31-36 DAE) respectively. The height and leaf area index of corn were significantly decreased by weed competition in both weed free and weed infested treatments (P
Abstract: We propose photo-BJMOSFET (Bipolar Junction Metal-Oxide-Semiconductor Field Effect Transistor) fabricated on SOI film. ITO film is adopted in the device as gate electrode to reduce light absorption. I-V characteristics of photo-BJMOSFET obtained in dark (dark current) and under 570nm illumination (photo current) are studied furthermore to achieve high photo-to-dark-current contrast ratio. Two variables in the calculation were the channel length and the thickness of the film which were set equal to six different values, i.e., L=2, 4, 6, 8, 10, and 12μm and three different values, i.e., dsi =100, 200 and 300nm, respectively. The results indicate that the greatest photo-to-dark-current contrast ratio is achieved with L=10μm and dsi=200 nm at VGK=0.6V.
Abstract: Spray chilling using air-mist nozzles has received
much attention in the food processing industry because of the
benefits it has shown over forced air convection. These benefits
include an increase in the heat transfer coefficient and a reduction in
the water loss by the product during cooling. However, few studies
have simulated the heat transfer and aerodynamics phenomena of the
air-mist chilling process for optimal operating conditions. The study
provides insight into the optimal conditions for spray impaction, heat
transfer efficiency and control of surface flooding. A computational
fluid dynamics model using a two-phase flow composed of water
droplets injected with air is developed to simulate the air-mist
chilling of food products. The model takes into consideration
droplet-to-surface interaction, water-film accumulation and surface
runoff. The results of this study lead to a better understanding of the
heat transfer enhancement, water conservation, and to a clear
direction for the optimal design of air-mist chilling systems that can
be used in commercial applications in the food and meat processing
industries.
Abstract: Enzymatic hydrolysis of starch from natural sources
finds potential application in commercial production of alcoholic
beverage and bioethanol. In this study the effect of starch
concentration, temperature, time and enzyme concentration were
studied and optimized for hydrolysis of Potato starch powder (of
mesh 80/120) into glucose syrup by immobilized (using Sodium
arginate) α-amylase using central composite design. The
experimental result on enzymatic hydrolysis of Potato starch was
subjected to multiple linear regression analysis using MINITAB 14
software. Positive linear effect of starch concentration, enzyme
concentration and time was observed on hydrolysis of Potato starch
by α-amylase. The statistical significance of the model was validated
by F-test for analysis of variance (p ≤ 0.01). The optimum value of
starch concentration, enzyme concentration, temperature, time and
were found to be 6% (w/v), 2% (w/v), 40°C and 80min respectively.
The maximum glucose yield at optimum condition was 2.34 mg/mL.
Abstract: In this study four Holstein steers with rumen fistula
fed 7 kg of dry matter (DM) of diets differing in concentrate to
alfalfa hay ratios as 60:40, 70:30, 80:20, and 90:10 in a 4 × 4 latin
square design. The pH of the ruminal fluid was measured before
the morning feeding (0.0 h) to 8 h post feeding. In this study, a
two-layered feed-forward neural network trained by the
Levenberg-Marquardt algorithm was used for modelling of ruminal
pH. The input variables of the network were time, concentrate to
alfalfa hay ratios (C/F), non fiber carbohydrate (NFC) and neutral
detergent fiber (NDF). The output variable was the ruminal pH.
The modeling results showed that there was excellent agreement
between the experimental data and predicted values, with a high
determination coefficient (R2 >0.96). Therefore, we suggest using
these model-derived biological values to summarize continuously
recorded pH data.
Abstract: Silver/polylactide nanocomposites (Ag/PLA-NCs) were
synthesized via chemical reduction method in diphase solvent. Silver
nitrate and sodium borohydride were used as a silver precursor
and reducing agent in the polylactide (PLA). The properties of
Ag/PLA-NCs were studied as a function of the weight percentages
of silver nanoparticles (8, 16 and 32 wt% of Ag-NPs) relative to
the weight of PLA. The Ag/PLA-NCs were characterized by Xray
diffraction (XRD), transmission electron microscopy (TEM),
electro-optical microscopy (EOM), UV-visible spectroscopy (UV-vis)
and Fourier transform infrared spectroscopy (FT-IR). XRD patterns
confirmed that Ag-NPs crystallographic planes were face centered
cubic (fcc) type. TEM images showed that mean diameters of Ag-NPs
were 3.30, 3.80 and 4.80 nm. Electro-optical microscopy revealed
excellent dispersion and interaction between Ag-NPs and PLA films.
The generation of silver nanoparticles was confirmed from the UVvisible
spectra. FT-IR spectra showed that there were no significant
differences between PLA and Ag/PLA-NCs films. The synthesized
Ag/PLA-NCs were stable in organic solution over a long period of
time without sign of precipitation.
Abstract: Many artificial intelligence (AI) techniques are inspired
by problem-solving strategies found in nature. Robustness is a key
feature in many natural systems. This paper studies robustness in
artificial neural networks (ANNs) and proposes several novel, nature
inspired ANN architectures. The paper includes encouraging results
from experimental studies on these networks showing increased
robustness.
Abstract: Phytases are enzymes used as an important component
in monogastric animals feeds in order to improve phosphorous
availability, since it is not readily assimilated by these animals in the
form of the phytate presented in plants and grains. As these enzymes
are used in industrial activities, they must retain its catalytic activities
during a certain storage period. This study presents information about
the stability of 4 different phytases, produced by four macromycetes
fungi through solid-state fermentation (SSF). There is a lack of data
in literature concerning phytase from macromycetes shelf-life in
storage conditions at room, cooling and freezing temperatures. The 4
phytases from macromycetes still had enzymatic activities around
100 days of storage at room temperature. At cooling temperature in
146 days of studies, the phytase from G. stipitatum was the most
stable with 44% of the initial activity, in U.gds (units per gram of
dried fermented substrate). The freezing temperature was the best
condition storage for phytases from G. stipitatum and T. versicolor.
Each condition provided a study for each mushroom phytase,
totalizing 12 studies. The phytases showed to be stable for a long
period without the addition of additives.
Abstract: The aim of this study is to identify the conditions of
implementation for reconfigurability in summarizing past flexible
manufacturing systems (FMS) research by drawing overall
conclusions from many separate High Performance Manufacturing
(HPM) studies. Meta-analysis will be applied to links between HPM
programs and their practices related to FMS and manufacturing
performance with particular reference to responsiveness performance.
More specifically, an application of meta-analysis will be made with
reference to two of the main steps towards the development of an
empirically-tested theory: testing the adequacy of the measurement of
variables and testing the linkages between the variables.
Abstract: Bladder carcinoma is an important worldwide health problem. Both cystoscopy and urine cytology used in detecting bladder cancer suffer from drawbacks where cystoscopy is an invasive method and urine cytology shows low sensitivity in low grade tumors. This study validates easier and less time-consuming techniques to evaluate the value of combined use of angiogenin and clusterin in comparison and combination with voided urine cytology in the detection of bladder cancer patients. This study includes malignant (bladder cancer patients, n= 50), benign (n=20) and healthy (n=20) groups. The studied groups were subjected to cystoscopic examination, detection of bilharzial antibodies, urine cytology, and estimation of urinary angiogenin and clusterin by ELISA. The overall sensitivity and specificity were 66% and 75% for angiogenin, 70% and 82.5% for clusterin and 46% and 80% for voided urine cytology. Combined sensitivity of angiogenin and clusterin with urine cytology increased from 82 to 88%.
Abstract: Many of the compounds present in potato are important because of their beneficial effects on health, therefore, are highly desirable in the human diet. Potato tubers contain significant amounts of anthocyanins. The aim of this research was to determine the content of anthocyanins and its relationship with the colour of organically and conventionally cultivated potato varieties. In the research eight potato samples of three potato varieties were analyzed on anthocyanins, dry matter content and color. Obtained results show that there was no significant influence on amount of anthocyanins between different cultivation environments (p>0.05) while between varieties – significant difference (p
Abstract: Interaction of inorganic water-soluble salts and building stones is studied in the paper. Two types of sandstone and one type of spongillite as representatives of materials used in historical masonry are subjected to experimental testing. Within the performed experiments, measurement of moisture and chloride concentration profiles is done in order to get input data for computational inverse analysis. Using the inverse analysis, moisture diffusivity and chloride diffusion coefficient of investigated materials are accessed. Additionally, the effect of salt presence on water vapor storage is investigated using dynamic vapor sorption device. The obtained data represents valuable information for restoration of historical masonry and give evidence on the performance of studied stones in contact with water soluble salts.
Abstract: In this paper, a set of experimental data has been used to assess the influence of abrasive water jet (AWJ) process parameters in cutting 6063-T6 aluminum alloy. The process variables considered here include nozzle diameter, jet traverse rate, jet pressure and abrasive flow rate. The effects of these input parameters are studied on depth of cut (h); one of most important characteristics of AWJ. The Taguchi method and regression modeling are used in order to establish the relationships between input and output parameters. The adequacy of the model is evaluated using analysis of variance (ANOVA) technique. In the next stage, the proposed model is embedded into a Simulated Annealing (SA) algorithm to optimize the AWJ process parameters. The objective is to determine a suitable set of process parameters that can produce a desired depth of cut, considering the ranges of the process parameters. Computational results prove the effectiveness of the proposed model and optimization procedure.
Abstract: The predictability of masonry arch bridges and their
behaviour is widely considered doubtful due to the lack of knowledge
about the conditions of a given masonry arch bridge. The assessment
methods for masonry arch bridges are MEXE, ARCHIE, RING and
Frame Analysis Method. The material properties of the masonry and
fill material are extremely difficult to determine accurately.
Consequently, it is necessary to examine the effect of load dispersal
angle through the fill material, the effect of variations in the stiffness
of the masonry, the tensile strength of the masonry mortar continuum
and the compressive strength of the masonry mortar continuum. It is
also important to understand the effect of fill material on load
dispersal angle to determine their influence on ratings. In this paper a
series of parametric studies, to examine the sensitivity of assessment
ratings to the various sets of input data required by the frame analysis
method, are carried out.