Abstract: Fault detection determines faultexistence and detecting
time. This paper discusses two layered fault detection methods to
enhance the reliability and safety. Two layered fault detection methods
consist of fault detection methods of component level controllers and
system level controllers. Component level controllers detect faults by
using limit checking, model-based detection, and data-driven
detection and system level controllers execute detection by stability
analysis which can detect unknown changes. System level controllers
compare detection results via stability with fault signals from lower
level controllers. This paper addresses fault detection methods via
stability and suggests fault detection criteria in nonlinear systems. The
fault detection method applies tothe hybrid control unit of a military
hybrid electric vehicleso that the hybrid control unit can detect faults
of the traction motor.
Abstract: An adaptive Chinese hand-talking system is presented
in this paper. By analyzing the 3 data collecting strategies for new
users, the adaptation framework including supervised and unsupervised
adaptation methods is proposed. For supervised adaptation,
affinity propagation (AP) is used to extract exemplar subsets, and enhanced
maximum a posteriori / vector field smoothing (eMAP/VFS)
is proposed to pool the adaptation data among different models. For
unsupervised adaptation, polynomial segment models (PSMs) are
used to help hidden Markov models (HMMs) to accurately label
the unlabeled data, then the "labeled" data together with signerindependent
models are inputted to MAP algorithm to generate
signer-adapted models. Experimental results show that the proposed
framework can execute both supervised adaptation with small amount
of labeled data and unsupervised adaptation with large amount
of unlabeled data to tailor the original models, and both achieve
improvements on the performance of recognition rate.
Abstract: The current-voltage characteristics of a PtSi/p-Si
Schottky barrier diode was measured at the temperature of 85 K and
from the forward bias region of the I-V curve, the electrical
parameters of the diode were measured by three methods. The results
obtained from the two methods which considered the series resistance
were in close agreement with each other and from them barrier height
(), ideality factor (n) and series resistance () were found to be
0.2045 eV, 2.877 and 14.556 K respectively. By measuring the I-V
characteristics in the temperature range of 85-136 K the electrical
parameters were observed to have strong dependency on temperature.
The increase of barrier height and decrease of ideality factor with
increasing temperature is attributed to the existence of barrier height
inhomogeneities in the silicide-semiconductor structure.
Abstract: This paper proposes a stroke extraction method for use in off-line signature verification. After giving a brief overview of the current ongoing researches an algorithm is introduced for detecting and following strokes in static images of signatures. Problems like the handling of junctions and variations in line width and line intensity are discussed in detail. Results are validated by both using an existing on-line signature database and by employing image registration methods.
Abstract: In this paper, we investigated the characteristic of a
clinical dataseton the feature selection and classification
measurements which deal with missing values problem.And also
posed the appropriated techniques to achieve the aim of the activity;
in this research aims to find features that have high effect to mortality
and mortality time frame. We quantify the complexity of a clinical
dataset. According to the complexity of the dataset, we proposed the
data mining processto cope their complexity; missing values, high
dimensionality, and the prediction problem by using the methods of
missing value replacement, feature selection, and classification.The
experimental results will extend to develop the prediction model for
cardiology.
Abstract: Text categorization is the problem of classifying text
documents into a set of predefined classes. After a preprocessing
step, the documents are typically represented as large sparse vectors.
When training classifiers on large collections of documents, both the
time and memory restrictions can be quite prohibitive. This justifies
the application of feature selection methods to reduce the
dimensionality of the document-representation vector. In this paper,
we present three feature selection methods: Information Gain,
Support Vector Machine feature selection called (SVM_FS) and
Genetic Algorithm with SVM (called GA_SVM). We show that the
best results were obtained with GA_SVM method for a relatively
small dimension of the feature vector.
Abstract: Defect prevention is the most vital but habitually
neglected facet of software quality assurance in any project. If
functional at all stages of software development, it can condense the
time, overheads and wherewithal entailed to engineer a high quality
product. The key challenge of an IT industry is to engineer a
software product with minimum post deployment defects.
This effort is an analysis based on data obtained for five selected
projects from leading software companies of varying software
production competence. The main aim of this paper is to provide
information on various methods and practices supporting defect
detection and prevention leading to thriving software generation. The
defect prevention technique unearths 99% of defects. Inspection is
found to be an essential technique in generating ideal software
generation in factories through enhanced methodologies of abetted
and unaided inspection schedules. On an average 13 % to 15% of
inspection and 25% - 30% of testing out of whole project effort time
is required for 99% - 99.75% of defect elimination.
A comparison of the end results for the five selected projects
between the companies is also brought about throwing light on the
possibility of a particular company to position itself with an
appropriate complementary ratio of inspection testing.
Abstract: Spatial outliers in remotely sensed imageries represent
observed quantities showing unusual values compared to their
neighbor pixel values. There have been various methods to detect the
spatial outliers based on spatial autocorrelations in statistics and data
mining. These methods may be applied in detecting forest fire pixels
in the MODIS imageries from NASA-s AQUA satellite. This is
because the forest fire detection can be referred to as finding spatial
outliers using spatial variation of brightness temperature. This point is
what distinguishes our approach from the traditional fire detection
methods. In this paper, we propose a graph-based forest fire detection
algorithm which is based on spatial outlier detection methods, and test
the proposed algorithm to evaluate its applicability. For this the
ordinary scatter plot and Moran-s scatter plot were used. In order to
evaluate the proposed algorithm, the results were compared with the
MODIS fire product provided by the NASA MODIS Science Team,
which showed the possibility of the proposed algorithm in detecting
the fire pixels.
Abstract: Reliable water level forecasts are particularly
important for warning against dangerous flood and inundation. The
current study aims at investigating the suitability of the adaptive
network based fuzzy inference system for continuous water level
modeling. A hybrid learning algorithm, which combines the least
square method and the back propagation algorithm, is used to
identify the parameters of the network. For this study, water levels
data are available for a hydrological year of 2002 with a sampling
interval of 1-hour. The number of antecedent water level that should
be included in the input variables is determined by two statistical
methods, i.e. autocorrelation function and partial autocorrelation
function between the variables. Forecasting was done for 1-hour until
12-hour ahead in order to compare the models generalization at
higher horizons. The results demonstrate that the adaptive networkbased
fuzzy inference system model can be applied successfully and
provide high accuracy and reliability for river water level estimation.
In general, the adaptive network-based fuzzy inference system
provides accurate and reliable water level prediction for 1-hour ahead
where the MAPE=1.15% and correlation=0.98 was achieved. Up to
12-hour ahead prediction, the model still shows relatively good
performance where the error of prediction resulted was less than
9.65%. The information gathered from the preliminary results
provide a useful guidance or reference for flood early warning
system design in which the magnitude and the timing of a potential
extreme flood are indicated.
Abstract: Image Edge Detection is one of the most important
parts of image processing. In this paper, by fuzzy technique, a new
method is used to improve digital image edge detection. In this
method, a 3x3 mask is employed to process each pixel by means of
vicinity. Each pixel is considered a fuzzy input and by examining
fuzzy rules in its vicinity, the edge pixel is specified and by utilizing
calculation algorithms in image processing, edges are displayed more
clearly. This method shows significant improvement compared to
different edge detection methods (e.g. Sobel, Canny).
Abstract: MM-Path, an acronym for Method/Message Path, describes the dynamic interactions between methods in object-oriented systems. This paper discusses the classifications of MM-Path, based on the characteristics of object-oriented software. We categorize it according to the generation reasons, the effect scope and the composition of MM-Path. A formalized representation of MM-Path is also proposed, which has considered the influence of state on response method sequences of messages. .Moreover, an automatic MM-Path generation approach based on UML Statechart diagram has been presented, and the difficulties in identifying and generating MM-Path can be solved. . As a result, it provides a solid foundation for further research on test cases generation based on MM-Path.
Abstract: The Genetic Algorithm (GA) is one of the most important methods used to solve many combinatorial optimization problems. Therefore, many researchers have tried to improve the GA by using different methods and operations in order to find the optimal solution within reasonable time. This paper proposes an improved GA (IGA), where the new crossover operation, population reformulates operation, multi mutation operation, partial local optimal mutation operation, and rearrangement operation are used to solve the Traveling Salesman Problem. The proposed IGA was then compared with three GAs, which use different crossover operations and mutations. The results of this comparison show that the IGA can achieve better results for the solutions in a faster time.
Abstract: In the 1980s, companies began to feel the effect of three major influences on their product development: newer and innovative technologies, increasing product complexity and larger organizations. And therefore companies were forced to look for new product development methods. This paper tries to focus on the two of new product development methods (DFM and CE). The aim of this paper is to see and analyze different product development methods specifically on Design for Manufacturability and Concurrent Engineering. Companies can achieve and be benefited by minimizing product life cycle, cost and meeting delivery schedule. This paper also presents simplified models that can be modified and used by different companies based on the companies- objective and requirements. Methodologies that are followed to do this research are case studies. Two companies were taken and analysed on the product development process. Historical data, interview were conducted on these companies in addition to that, Survey of literatures and previous research works on similar topics has been done during this research. This paper also tries to show the implementation cost benefit analysis and tries to calculate the implementation time. From this research, it has been found that the two companies did not achieve the delivery time to the customer. Some of most frequently coming products are analyzed and 50% to 80 % of their products are not delivered on time to the customers. The companies are following the traditional way of product development that is sequentially design and production method, which highly affect time to market. In the case study it is found that by implementing these new methods and by forming multi disciplinary team in designing and quality inspection; the company can reduce the workflow steps from 40 to 30.
Abstract: Contact stress is an important problem in industry.
This is a problem that in the first attention may be don-t appears, but
disregard of these stresses cause a lot of damages in machines. These
stresses occur at locations such as gear teeth, bearings, cams and
between a locomotive wheel and the railroad rail. These stresses
cause failure by excessive elastic deformation, yielding and fracture.
In this paper we intend show the effective parameters in contact
stress and ponder effect of curvature. In this paper we study contact
stresses on the surface of gear teeth and compare these stresses for
four popular profiles of gear teeth (involute, cycloid, epicycloids, and
hypocycloid). We study this problem with mathematical and finite
element methods and compare these two methods on different profile
surfaces.
Abstract: This paper proposes a novel improvement of forecasting approach based on using time-invariant fuzzy time series. In contrast to traditional forecasting methods, fuzzy time series can be also applied to problems, in which historical data are linguistic values. It is shown that proposed time-invariant method improves the performance of forecasting process. Further, the effect of using different number of fuzzy sets is tested as well. As with the most of cited papers, historical enrollment of the University of Alabama is used in this study to illustrate the forecasting process. Subsequently, the performance of the proposed method is compared with existing fuzzy time series time-invariant models based on forecasting accuracy. It reveals a certain performance superiority of the proposed method over methods described in the literature.
Abstract: The most important subtype of non-Hodgkin-s
lymphoma is the Diffuse Large B-Cell Lymphoma. Approximately
40% of the patients suffering from it respond well to therapy,
whereas the remainder needs a more aggressive treatment, in order to
better their chances of survival. Data Mining techniques have helped
to identify the class of the lymphoma in an efficient manner. Despite
that, thousands of genes should be processed to obtain the results.
This paper presents a comparison of the use of various attribute
selection methods aiming to reduce the number of genes to be
searched, looking for a more effective procedure as a whole.
Abstract: This paper discusses the implementation of a fuzzy logic based coordinated voltage control for a distribution system connected with distributed generations (DGs). The connection of DGs has created a challenge for the distribution network operators to keep the voltage in the system within its acceptable limits. Intelligent centralized or coordinated voltage control schemes have proven to be more reliable due to its ability to provide more control and coordination with the communication with other network devices. In this work, voltage control using fuzzy logic by coordinating three methods of control, power factor control, on load tap changer and generation curtailment is implemented on a distribution network test system. The results show that the fuzzy logic based coordination is able to keep the voltage within its allowable limits.
Abstract: Safe drinking water is one of the biggest issues facing
the planet this century. The primary aim of this paper is to present our
research focused on theoretical and experimental analysis of potable
water and in-building water distribution systems from the point of
view of microbiological risk on the basis of confrontation between
the theoretical analysis and synthesis of gathered information in
conditions of the Slovak Republic. The presence of the bacteria
Legionella in water systems, especially in hot water distribution
system, represents in terms of health protection of inhabitants the
crucial problem which cannot be overlooked. Legionella
pneumophila discovery, its classification and its influence on
installations inside buildings are relatively new. There are a lot of
guidelines and regulations developed in many individual countries for
the design, operation and maintenance for tap water systems to avoid
the growth of bacteria Legionella pneumophila, but in Slovakia we
don-t have any. The goal of this paper is to show the necessity of
prevention and regulations for installations inside buildings verified
by simulation methods.
Abstract: This study aims to assess the potential of solar energy technology for improving access to water and hence the livelihood strategies of rural communities in Baja California Sur, Mexico. It focuses on livestock ranches and photovoltaic water-pumptechnology as well as other water extraction methods. The methodology used are the Sustainable Livelihoods and the Appropriate Technology approaches. A household survey was applied in June of 2006 to 32 ranches in the municipality, of which 22 used PV pumps; and semi-structured interviews were conducted. Findings indicate that solar pumps have in fact helped people improve their quality of life by allowing them to pursue a different livelihood strategy and that improved access to water -not necessarily as more water but as less effort to extract and collect it- does not automatically imply overexploitation of the resource; consumption is based on basic needs as well as on storage and pumping capacity. Justification for such systems lies in the avoidance of logistical problems associated to fossil fuels, PV pumps proved to be the most beneficial when substituting gasoline or diesel equipment but of dubious advantage if intended to replace wind or gravity systems. Solar water pumping technology-s main obstacle to dissemination are high investment and repairs costs and it is therefore not suitable for all cases even when insolation rates and water availability are adequate. In cases where affordability is not an obstacle it has become an important asset that contributes –by means of reduced expenses, less effort and saved time- to the improvement of livestock, the main livelihood provider for these ranches.
Abstract: In all industries which are related to heat, suitable
thermal ranges are defined for each device to operate well.
Consideration of these limits requires a thermal control unit beside
the main system. The Satellite Thermal Control Unit exploits from
different methods and facilities individually or mixed. For enhancing
heat transfer between primary surface and the environment,
utilization of radiating extended surfaces are common. Especially for
large temperature differences; variable thermal conductivity has a
strong effect on performance of such a surface .In most literatures,
thermo-physical properties, such as thermal conductivity, are
assumed as constant. However, in some recent researches the
variation of these parameters is considered. This may be helpful for
the evaluation of fin-s temperature distribution in relatively large
temperature differences. A new method is introduced to evaluate
temperature-dependent thermal conductivity values. The finite
volume method is employed to simulate numerically the temperature
distribution in a space radiating fin. The present modeling is carried
out for Aluminum as fin material and compared with previous
method. The present results are also compared with those of two
other analytical methods and good agreement is shown.