Abstract: A spanning tree of a connected graph is a tree which
consists the set of vertices and some or perhaps all of the edges from
the connected graph. In this paper, a model for spanning tree
transformation of connected graphs into single-row networks, namely
Spanning Tree of Connected Graph Modeling (STCGM) will be
introduced. Path-Growing Tree-Forming algorithm applied with
Vertex-Prioritized is contained in the model to produce the spanning
tree from the connected graph. Paths are produced by Path-Growing
and they are combined into a spanning tree by Tree-Forming. The
spanning tree that is produced from the connected graph is then
transformed into single-row network using Tree Sequence Modeling
(TSM). Finally, the single-row routing problem is solved using a
method called Enhanced Simulated Annealing for Single-Row
Routing (ESSR).
Abstract: Among all geo-hydrological relationships, rainfallrunoff
relationship is of utmost importance in any hydrological
investigation and water resource planning. Spatial variation, lag time
involved in obtaining areal estimates for the basin as a whole can
affect the parameterization in design stage as well as in planning
stage. In conventional hydrological processing of data, spatial aspect
is either ignored or interpolated at sub-basin level. Temporal
variation when analysed for different stages can provide clues for its
spatial effectiveness. The interplay of space-time variation at pixel
level can provide better understanding of basin parameters.
Sustenance of design structures for different return periods and their
spatial auto-correlations should be studied at different geographical
scales for better management and planning of water resources.
In order to understand the relative effect of spatio-temporal
variation in hydrological data network, a detailed geo-hydrological
analysis of Betwa river catchment falling in Lower Yamuna Basin is
presented in this paper. Moreover, the exact estimates about the
availability of water in the Betwa river catchment, especially in the
wake of recent Betwa-Ken linkage project, need thorough scientific
investigation for better planning. Therefore, an attempt in this
direction is made here to analyse the existing hydrological and
meteorological data with the help of SPSS, GIS and MS-EXCEL
software. A comparison of spatial and temporal correlations at subcatchment
level in case of upper Betwa reaches has been made to
demonstrate the representativeness of rain gauges. First, flows at
different locations are used to derive correlation and regression
coefficients. Then, long-term normal water yield estimates based on
pixel-wise regression coefficients of rainfall-runoff relationship have
been mapped. The areal values obtained from these maps can
definitely improve upon estimates based on point-based
extrapolations or areal interpolations.
Abstract: Location-based services (LBS) exploit the known
location of a user to provide services dependent on their geographic
context and personalized needs [1].
The development and arrival of broadband mobile data networks
supported with mobile terminals equipped with new location
technologies like GPS have finally created opportunities for
implementation of LBS applications. But, from the other side,
collecting location information data in general raises privacy
concerns.
This paper presents results from two surveys of LBS acceptance in
Croatia. The first survey was administered on 181 students, and the
second extended survey involved pattern of 180 Croatian citizens.
We developed questionnaire which consists of descriptions of 15
different applications with scale which measures perceptions and
attitudes of users towards these applications.
We report the results to identify potential commercial applications
for LBS in B2C segment. Our findings suggest that some types of
applications like emergency&safety services and navigation have
significantly higher rate of acceptance than other types.
Abstract: The biological activity of A. pullulans isolates against
species of the genus Fusarium, bacteria of the genus Azotobacter and
pseudomonads colonizing wheat kernels was evaluated. A field
experiment was carried out in 2009-2011, in north-eastern Poland.
Winter wheat (cv. Bogatka) plants were sprayed with a cell
suspension of A. pullulans at a density of 106 - 108 per cm3 water at
the stem elongation stage and the heading stage. Untreated plants
served as control. The abundance of epiphytic yeasts, bacteria of the
genus Azotobacter, pseudomonads and Fusarium pathogens on wheat
grain was estimated at harvest and after six months’ storage. The
average size of yeast communities was significantly greater on wheat
kernels treated with a cell suspension of A. pullulans, compared with
control samples. In 2010-2011, biological control reduced the
abundance of some species of the genus Fusarium.
Abstract: Heavy rainfall greatly affects the aerodynamic performance of the aircraft. There are many accidents of aircraft caused by aerodynamic efficiency degradation by heavy rain.
In this Paper we have studied the heavy rain effects on the aerodynamic efficiency of cambered NACA 64-210 and symmetric
NACA 0012 airfoils. Our results show significant increase in drag and decrease in lift. We used preprocessing software gridgen for creation of geometry and mesh, used fluent as solver and techplot as postprocessor. Discrete phase modeling called DPM is used to model the rain particles using two phase flow approach. The rain particles are assumed to be inert.
Both airfoils showed significant decrease in lift and increase in drag in simulated rain environment. The most significant difference between these two airfoils was the NACA 64-210 more sensitivity than NACA 0012 to liquid water content (LWC). We believe that the results showed in this paper will be useful for the designer of the commercial aircrafts and UAVs, and will be helpful for training of the pilots to control the airplanes in heavy rain.
Abstract: The article examines an opportunity of corruption
restriction exercised by international business community in Russia.
Integration of Russian economy into the international business does
not reduce corruption inside the country. Foreign actors investing in
Russia under the condition of obtaining their required rates of returns
will be reluctant to harm their investments by involving into anticorruption
activities. Furthermore, many Russian firms- competitive
advantage could be directly related to their corruption connections. In
this case, foreign investments would only accentuate corrupt
companies- success by supporting them financially
Abstract: Nano MgO has been synthesized by hydration and
dehydration method by modifies the commercial MgO. The prepared
MgO had been investigated as a heterogeneous base catalyst for
transesterification process for biodiesel production using palm oil.
TGA, FT-IR and XRD results obtained from this study lie each other
and proved in the formation of nano MgO from decomposition of
Mg(OH)2. This study proved that the prepared nano MgO was a
better base transesterification catalyst compared to commercial MgO.
The nano MgO calcined at 600ºC had gives the highest conversion of
51.3% of palm oil to biodiesel.
Abstract: In a state-of-the-art industrial production line of
photovoltaic products the handling and automation processes are of
particular importance and implication. While processing a fully
functional crystalline solar cell an as-cut photovoltaic wafer is subject
to numerous repeated handling steps. With respect to stronger
requirements in productivity and decreasing rejections due to defects
the mechanical stress on the thin wafers has to be reduced to a
minimum as the fragility increases by decreasing wafer thicknesses.
In relation to the increasing wafer fragility, researches at the
Fraunhofer Institutes IPA and CSP showed a negative correlation
between multiple handling processes and the wafer integrity. Recent
work therefore focused on the analysis and optimization of the dry
wafer stack separation process with compressed air. The achievement
of a wafer sensitive process capability and a high production
throughput rate is the basic motivation in this research.
Abstract: Methanol-to-olefins (MTO) coupled with
transformation of coal or natural gas to methanol gives an interesting
and promising way to produce ethylene and propylene. To investigate
solid concentration in gas-solid fluidized bed for methanol-to-olefins
process catalyzed by SAPO-34, a cold model experiment system is
established in this paper. The system comprises a gas distributor in a
300mm internal diameter and 5000mm height acrylic column, the
fiber optic probe system and series of cyclones. The experiments are
carried out at ambient conditions and under different superficial gas
velocity ranging from 0.3930m/s to 0.7860m/s and different initial bed
height ranging from 600mm to 1200mm. The effects of radial
distance, axial distance, superficial gas velocity, initial bed height on
solid concentration in the bed are discussed. The effects of distributor
shape and porosity on solid concentration are also discussed. The
time-averaged solid concentration profiles under different conditions
are obtained.
Abstract: In aerospace applications, interactions of airflow with
aircraft structures can result in undesirable structural deformations.
This structural deformation in turn, can be predicted if the natural
modes of the structure are known. This can be achieved through
conventional modal testing that requires a known excitation force in
order to extract these dynamic properties. This technique can be
experimentally complex because of the need for artificial excitation
and it is also does not represent actual operational condition. The
current work presents part of research work that address the practical
implementation of operational modal analysis (OMA) applied to a
cantilevered hybrid composite plate employing single contactless
sensing system via laser vibrometer. OMA technique extracts the
modal parameters based only on the measurements of the dynamic
response. The OMA results were verified with impact hammer modal
testing and good agreement was obtained.
Abstract: Ants are fascinating creatures that demonstrate the
ability to find food and bring it back to their nest. Their ability as a
colony, to find paths to food sources has inspired the development of
algorithms known as Ant Colony Systems (ACS). The principle of
cooperation forms the backbone of such algorithms, commonly used
to find solutions to problems such as the Traveling Salesman
Problem (TSP). Ants communicate to each other through chemical
substances called pheromones. Modeling individual ants- ability to
manipulate this substance can help an ACS find the best solution.
This paper introduces a Dynamic Ant Colony System with threelevel
updates (DACS3) that enhance an existing ACS. Experiments
were conducted to observe single ant behavior in a colony of
Malaysian House Red Ants. Such behavior was incorporated into the
DACS3 algorithm. We benchmark the performance of DACS3 versus
DACS on TSP instances ranging from 14 to 100 cities. The result
shows that the DACS3 algorithm can achieve shorter distance in
most cases and also performs considerably faster than DACS.
Abstract: Equations with differentials relating to the inverse of an unknown function rather than to the unknown function itself are solved exactly for some special cases and numerically for the general case. Invertibility combined with differentiability over connected domains forces solutions always to be monotone. Numerical function inversion is key to all solution algorithms which either are of a forward type or a fixed point type considering whole approximate solution functions in each iteration. The given considerations are restricted to ordinary differential equations with inverted functions (ODEIs) of first order. Forward type computations, if applicable, admit consistency of order one and, under an additional accuracy condition, convergence of order one.
Abstract: The objective of this study is to investigate fire
behaviors, experimentally and numerically, in a scaled version of an
underground station. The effect of ventilation velocity on the fire is
examined. Fire experiments are simulated by burning 10 ml
isopropyl alcohol fuel in a fire pool with dimensions 5cm x 10cm x 4
mm at the center of 1/100 scaled underground station model. A
commercial CFD program FLUENT was used in numerical
simulations. For air flow simulations, k-ω SST turbulence model and
for combustion simulation, non-premixed combustion model are
used. This study showed that, the ventilation velocity is increased
from 1 m/s to 3 m/s the maximum temperature in the station is found
to be less for ventilation velocity of 1 m/s. The reason for these
experimental result lies on the relative dominance of oxygen supply
effect on cooling effect. Without piston effect, maximum temperature
occurs above the fuel pool. However, when the ventilation velocity
increased the flame was tilted in the direction of ventilation and the
location of maximum temperature moves along the flow direction.
The velocities measured experimentally in the station at different
locations are well matched by the CFD simulation results. The
prediction of general flow pattern is satisfactory with the smoke
visualization tests. The backlayering in velocity is well predicted by
CFD simulation. However, all over the station, the CFD simulations
predicted higher temperatures compared to experimental
measurements.
Abstract: In this paper we present modeling and simulation for
physical vapor deposition for metallic bipolar plates. In the models
we discuss the application of different models to simulate the
transport of chemical reactions of the gas species in the gas chamber.
The so called sputter process is an extremely sensitive process to
deposit thin layers to metallic plates. We have taken into account
lower order models to obtain first results with respect to the gas
fluxes and the kinetics in the chamber.
The model equations can be treated analytically in some
circumstances and complicated multi-dimensional models are solved
numerically with a software-package (UG unstructed grids, see [1]).
Because of multi-scaling and multi-physical behavior of the models,
we discuss adapted schemes to solve more accurate in the different
domains and scales. The results are discussed with physical
experiments to give a valid model for the assumed growth of thin
layers.
Abstract: Low temperature (LT) is one of the most abiotic
stresses causing loss of yield in wheat (T. aestivum). Four major
genes in wheat (Triticum aestivum L.) with the dominant alleles
designated Vrn–A1,Vrn–B1,Vrn–D1 and Vrn4, are known to have
large effects on the vernalization response, but the effects on cold
hardiness are ambiguous. Poor cold tolerance has restricted winter
wheat production in regions of high winter stress [9]. It was known
that nearly all wheat chromosomes [5] or at least 10 chromosomes of
21 chromosome pairs are important in winter hardiness [15]. The
objective of present study was to clarify the role of each chromosome
in cold tolerance. With this purpose we used 20 isogenic lines of
wheat. In each one of these isogenic lines only a chromosome from
‘Bezostaya’ variety (a winter habit cultivar) was substituted to
‘Capple desprez’ variety. The plant materials were planted in
controlled conditions with 20º C and 16 h day length in moderately
cold areas of Iran at Karaj Agricultural Research Station in 2006-07
and the acclimation period was completed for about 4 weeks in a
cold room with 4º C. The cold hardiness of these isogenic lines was
measured by LT50 (the temperature in which 50% of the plants are
killed by freezing stress).The experimental design was completely
randomized block design (RCBD)with three replicates. The results
showed that chromosome 5A had a major effect on freezing
tolerance, and then chromosomes 1A and 4A had less effect on this
trait. Further studies are essential to understanding the importance of
each chromosome in controlling cold hardiness in wheat.
Abstract: Rapid progress in process automation and tightening
quality standards result in a growing demand being placed on fault
detection and diagnostics methods to provide both speed and
reliability of motor quality testing. Doubly fed induction generators
are used mainly for wind energy conversion in MW power plants.
This paper presents a detection of an inter turn stator and an open
phase faults, in a doubly fed induction machine whose stator and
rotor are supplied by two pulse width modulation (PWM) inverters.
The method used in this article to detect these faults, is based on
Park-s Vector Approach, using a neural network.
Abstract: This research aimed to study correlation between
work satisfaction and organization core value of officers in
Waterworks Authority, Bangkean Branch. Sample group of the study
was 112 officers who worked in the Waterworks Authority,
Bangkean Branch. Questionnaires were employed as a research tools,
while, Percentage, Mean, Standard Deviation, T-test, One-way
ANOVA, and Pearson Product Moment Correlation were claimed as
statistics used in this study. Researcher found that overall and
individual aspects of work satisfaction namely, work characteristic,
work progress, and colleagues significantly correlated with
organization core value in aspect of perception in choice of work at
0.5, 0.01, and 0.01 respectively. Also, such aspects were compatible
with income at .05 which indicated the low level of correlation, mid
low correlation respectively at the same direction, same direction,
opposite direction, and same direction, correspondingly.
Abstract: The aims of this study were to compare the
differences of being good membership behavior among faculties and
staffs of Suan Sunandha Rajabhat University with different sex, age,
income, education, marital status, and working period, and
investigate the relationships between organizational commitment and
being good membership behavior. The research methodology
employed a questionnaire as a quantitative method. The respondents
were 305 faculties and staffs of Suan Sunandha Rajabhat University.
This research used Percentage, Mean, Standard Deviation, t-test,
One-Way ANOVA Analysis of Variance, and Pearson’s Product
Moment Correlation Coefficient in data analysis. The results showed
that organizational commitment among faculties and staffs of Suan
Sunandha Rajabhat University was at a high level. In addition,
differences in sex, age, income, education, marital status, and
working period revealed differences in being good membership
behavior. The results also indicated that organizational commitment
was significantly related to being good membership behavior.
Abstract: In this research, the authors analyze network stability
using agent-based simulation. Firstly, the authors focus on analyzing
large networks (eight agents) by connecting different two stable small
social networks (A small stable network is consisted on four agents.).
Secondly, the authors analyze the network (eight agents) shape which
is added one agent to a stable network (seven agents). Thirdly, the
authors analyze interpersonal comparison of utility. The “star-network
"was not found on the result of interaction among stable two small
networks. On the other hand, “decentralized network" was formed
from several combination. In case of added one agent to a stable
network (seven agents), if the value of “c"(maintenance cost of per
a link) was larger, the number of patterns of stable network was
also larger. In this case, the authors identified the characteristics of a
large stable network. The authors discovered the cases of decreasing
personal utility under condition increasing total utility.
Abstract: In the normal operation conditions of a pico satellite,
conventional Unscented Kalman Filter (UKF) gives sufficiently good
estimation results. However, if the measurements are not reliable
because of any kind of malfunction in the estimation system, UKF
gives inaccurate results and diverges by time. This study, introduces
Robust Unscented Kalman Filter (RUKF) algorithms with the filter
gain correction for the case of measurement malfunctions. By the use
of defined variables named as measurement noise scale factor, the
faulty measurements are taken into the consideration with a small
weight and the estimations are corrected without affecting the
characteristic of the accurate ones. Two different RUKF algorithms,
one with single scale factor and one with multiple scale factors, are
proposed and applied for the attitude estimation process of a pico
satellite. The results of these algorithms are compared for different
types of measurement faults in different estimation scenarios and
recommendations about their applications are given.