Abstract: The stem cells have ability to differentiated
themselves through mitotic cell division and various range of
specialized cell types. Cellular differentiation is a way by which few
specialized cell develops into more specialized.This paper studies the
fundamental problem of computational schema for an artificial neural
network based on chemical, physical and biological variables of
state. By doing this type of study system could be model for a viable
propagation of various economically important stem cells
differentiation. This paper proposes various differentiation outcomes
of artificial neural network into variety of potential specialized cells
on implementing MATLAB version 2009. A feed-forward back
propagation kind of network was created to input vector (five input
elements) with single hidden layer and one output unit in output
layer. The efficiency of neural network was done by the assessment
of results achieved from this study with that of experimental data
input and chosen target data. The propose solution for the efficiency
of artificial neural network assessed by the comparatative analysis of
“Mean Square Error" at zero epochs. There are different variables of
data in order to test the targeted results.
Abstract: The influence of extrusion parameters on surface
quality and properties of AA6061+x% vol. SiC (x = 0; 2,5; 5; 7,5;10)
composites was discussed in this paper. The averages size of
AA6061 and SiC particles were 10.6 μm and 0.42 μm, respectively.
Two series of composites (I - compacts were preheated at extrusion
temperature through 0.5 h and cooled by water directly after process;
II - compacts were preheated through 3 hours and were not cooled)
were consolidated via powder metallurgy processing and extruded by
KoBo method. High values of density for both series of composites
were achieved. Better surface quality was observed for II series of
composites. Moreover, for these composites lower (compared to I
series) but more uniform strength properties over the cross-section of
the bar were noticed. Microstructure and Young-s modulus
investigations were made.
Abstract: Historic preservation areas are extremely vulnerable to disasters because they are home to many vulnerable people and contain many closely spaced wooden houses. However, the narrow streets in these regions have historic meaning, which means that they cannot be widened and can become blocked easily during large disasters. Here, we describe our efforts to establish a methodology for the planning of evacuation route sin such historic preservation areas. In particular, this study aims to clarify the effectiveness of measures intended to secure two-way evacuation routes for vulnerable people during large disasters in a historic area preserved under the Cultural Properties Protection Law, Japan.
Abstract: The dispersion of heavy particles line in an isotropic
and incompressible three-dimensional turbulent flow has been
studied using the Kinematic Simulation techniques to find out the
evolution of the line fractal dimension. In this study, the fractal
dimension of the line is found for different cases of heavy particles
inertia (different Stokes numbers) in the absence of the particle
gravity with a comparison with the fractal dimension obtained in the
diffusion case of material line at the same Reynolds number. It can
be concluded for the dispersion of heavy particles line in turbulent
flow that the particle inertia affect the fractal dimension of a line
released in a turbulent flow for Stokes numbers 0.02 < St < 2. At the
beginning for small times, most of the different cases are not affected
by the inertia until a certain time, the particle response time τa, with
larger time as the particles inertia increases, the fractal dimension of
the line increases owing to the particles becoming more sensitive to
the small scales which cause the change in the line shape during its
journey.
Abstract: Different agricultural waste peels were assessed for
their suitability to be used as primary substrates for the
bioremediation of free cyanide (CN-) by a cyanide-degrading fungus
Aspergillus awamori isolated from cyanide containing wastewater.
The bioremediated CN- concentration were in the range of 36 to 110
mg CN-/L, with Orange (C. sinensis) > Carrot (D. carota) > Onion
(A. cepa) > Apple (M. pumila), being chosen as suitable substrates
for large scale CN- degradation processes due to: 1) the high
concentration of bioremediated CN-, 2) total reduced sugars released
into solution to sustain the biocatalyst, and 3) minimal residual NH4-
N concentration after fermentation. The bioremediation rate constants
(k) were 0.017h-1 (0h < t < 24h), with improved bioremediation rates
(0.02189h-1) observed after 24h. The averaged nitrilase activity was
~10 U/L.
Abstract: This paper intends to identify the ethnic Kazakhstani
Koreans- political process of identity formation by exploring their
narrative and practice about the state language represented in the
course of their becoming the new citizens of a new independent state.
The Russophone Kazakhstani Koreans- inability to speak the official
language of their affiliated state is considered there as dissatisfying the
basic requirement of citizens of the independent state, so that they are
becoming marginalized from the public sphere. Their contradictory
attitude that at once demonstrates nominal reception and practical
rejection of the obligatory state language unveils a high barrier inside
between their self-language and other-language. In this paper, the
ethnic Korean group-s conflicting linguistic identity is not seen as a
free and simple choice, but as a dynamic struggle and political process
in which the subject-s past experiences and memories intersect with
the external elements of pressure.
Abstract: This study has investigated a vehicle Lumped
Parameter Model (LPM) in frontal crash. There are several ways for
determining spring and damper characteristics and type of problem
shall be considered as system identification. This study use Genetic
Algorithm (GA) procedure, being an effective procedure in case of
optimization issues, for optimizing errors, between target data
(experimental data) and calculated results (being obtained by
analytical solving). In this study analyzed model in 5-DOF then
compared our results with 5-DOF serial model. Finally, the response
of model due to external excitement is investigated.
Abstract: This paper proposes improved delay-dependent stability conditions of the linear time-delay systems of neutral type. The proposed methods employ a suitable Lyapunov-Krasovskii’s functional and a new form of the augmented system. New delay-dependent stability criteria for the systems are established in terms of Linear matrix inequalities (LMIs) which can be easily solved by various effective optimization algorithms. Numerical examples showed that the proposed method is effective and can provide less conservative results.
Abstract: Reverse engineering of full-genomic interaction networks based on compendia of expression data has been successfully applied for a number of model organisms. This study adapts these approaches for an important non-model organism: The major human fungal pathogen Candida albicans. During the infection process, the pathogen can adapt to a wide range of environmental niches and reversibly changes its growth form. Given the importance of these processes, it is important to know how they are regulated. This study presents a reverse engineering strategy able to infer fullgenomic interaction networks for C. albicans based on a linear regression, utilizing the sparseness criterion (LASSO). To overcome the limited amount of expression data and small number of known interactions, we utilize different prior-knowledge sources guiding the network inference to a knowledge driven solution. Since, no database of known interactions for C. albicans exists, we use a textmining system which utilizes full-text research papers to identify known regulatory interactions. By comparing with these known regulatory interactions, we find an optimal value for global modelling parameters weighting the influence of the sparseness criterion and the prior-knowledge. Furthermore, we show that soft integration of prior-knowledge additionally improves the performance. Finally, we compare the performance of our approach to state of the art network inference approaches.
Abstract: The response of growth and yield of rainfed-chickpea
to population density should be evaluated based on long-term
experiments to include the climate variability. This is achievable just
by simulation. In this simulation study, this evaluation was done by
running the CYRUS model for long-term daily weather data of five
locations in Iran. The tested population densities were 7 to 59 (with
interval of 2) stands per square meter. Various functions, including
quadratic, segmented, beta, broken linear, and dent-like functions,
were tested. Considering root mean square of deviations and linear
regression statistics [intercept (a), slope (b), and correlation
coefficient (r)] for predicted versus observed variables, the quadratic
and broken linear functions appeared to be appropriate for describing
the changes in biomass and grain yield, and in harvest index,
respectively. Results indicated that in all locations, grain yield tends
to show increasing trend with crowding the population, but
subsequently decreases. This was also true for biomass in five
locations. The harvest index appeared to have plateau state across
low population densities, but decreasing trend with more increasing
density. The turning point (optimum population density) for grain
yield was 30.68 stands per square meter in Isfahan, 30.54 in Shiraz,
31.47 in Kermanshah, 34.85 in Tabriz, and 32.00 in Mashhad. The
optimum population density for biomass ranged from 24.6 (in
Tabriz) to 35.3 stands per square meter (Mashhad). For harvest index
it varied between 35.87 and 40.12 stands per square meter.
Abstract: One of the determinants of a firm-s prosperity is the
customers- perceived service quality and satisfaction. While service
quality is wide in scope, and consists of various dimensions, there
may be differences in the relative importance of these dimensions in
affecting customers- overall satisfaction of service quality.
Identifying the relative rank of different dimensions of service quality
is very important in that it can help managers to find out which
service dimensions have a greater effect on customers- overall
satisfaction. Such an insight will consequently lead to more effective
resource allocation which will finally end in higher levels of
customer satisfaction. This issue – despite its criticality- has not
received enough attention so far. Therefore, using a sample of 240
bank customers in Iran, an artificial neural network is developed to
address this gap in the literature. As customers- evaluation of service
quality is a subjective process, artificial neural networks –as a brain
metaphor- may appear to have a potentiality to model such a
complicated process. Proposing a neural network which is able to
predict the customers- overall satisfaction of service quality with a
promising level of accuracy is the first contribution of this study. In
addition, prioritizing the service quality dimensions in affecting
customers- overall satisfaction –by using sensitivity analysis of
neural network- is the second important finding of this paper.
Abstract: Marketing is an essential issue to the survival of any
real estate company in Turkey. There are some factors which are
constraining the achievements of the marketing and sales strategies in
the Turkey real estate industry. This study aims to identify and
prioritise the most significant constraints to marketing in real estate
sector and new strategies based on those constraints. This study is
based on survey method, where the respondents such as credit
counsellors, real estate investors, consultants, academicians and
marketing representatives in Turkey were asked to rank forty seven
sub-factors according to their levels of impact. The results of Multiattribute
analytical technique indicated that the main subcomponents
having impact on marketing in real estate sector are interest rates, real
estate credit availability, accessibility, company image and consumer
real income, respectively. The identified constraints are expected to
guide the marketing team in a sales-effective way.
Abstract: Manganese steel (Hadfield) is one of the important
alloys in industry due to its special properties. High work hardening
ability with appropriate toughness and ductility are the properties that
caused this alloy to be used in wear resistance parts and in high
strength condition. Heat treatment is the main process through which
the desired mechanical properties and microstructures are obtained in
Hadfield steel. In this study various heat treatment cycles, differing in
austenising temperature, time and quenching solution are applied. For
this purpose, the same samples of manganese steel was heat treated in
9 different cycles, and then the mechanical properties and
microstructures were investigated. Based on the results of the study,
the optimum heat treatment cycle was obtained.
Abstract: A multi-agent system is developed here to predict
monthly details of the upcoming peak of the 24th solar magnetic
cycle. While studies typically predict the timing and magnitude of
cycle peaks using annual data, this one utilizes the unsmoothed
monthly sunspot number instead. Monthly numbers display more
pronounced fluctuations during periods of strong solar magnetic
activity than the annual sunspot numbers. Because strong magnetic
activities may cause significant economic damages, predicting
monthly variations should provide different and perhaps helpful
information for decision-making purposes. The multi-agent system
developed here operates in two stages. In the first, it produces twelve
predictions of the monthly numbers. In the second, it uses those
predictions to deliver a final forecast. Acting as expert agents, genetic
programming and neural networks produce the twelve fits and
forecasts as well as the final forecast. According to the results
obtained, the next peak is predicted to be 156 and is expected to
occur in October 2011- with an average of 136 for that year.
Abstract: Polyurethane foams (PUF) were formed by a chemical
reaction of polyol and isocyanate. The polyol was manufactured by
ring-opening hydrolysis of epoxidized soybean oil in the presence of
phosphoric acid under varying experimental conditions. Other
factors in the foam formulation such as water content and surfactant
were kept constant. The effect of the amount of solvents, phosphoric
acid, and their derivates in the foam formulation on the properties of
polyurethane foams were studied. The properties of the material were
measured via a number of parameters, which are water content of
prepared polyol, polymer density and cellular structures.
Abstract: The Brazilian legislation has only established
diagnostic reference levels (DRLs) in terms of Multiple Scan
Average Dose (MSAD) as a quality control parameter for computed
tomography (CT) scanners. Compliance with DRLs can be verified
by measuring the Computed Tomography Kerma Index (Ca,100) with
a pencil ionization chamber or by obtaining the kerma distribution in
CT scans with radiochromic films or rod shape lithium fluoride
termoluminescent dosimeters (TLD-100). TL dosimeters were used
to record kerma profiles and to determine MSAD values of a Bright
Speed model GE CT scanner. Measurements were done with
radiochromic films and TL dosimeters distributed in cylinders
positioned in the center and in four peripheral bores of a standard
polymethylmethacrylate (PMMA) body CT dosimetry phantom.
Irradiations were done using a protocol for adult chest. The
maximum values were found at the midpoint of the longitudinal axis.
The MSAD values obtained with three dosimetric techniques were
compared.
Abstract: In the current economy of increasing global
competition, many organizations are attempting to use knowledge as
one of the means to gain sustainable competitive advantage. Besides
large organizations, the success of SMEs can be linked to how well
they manage their knowledge. Despite the profusion of research
about knowledge management within large organizations, fewer
studies tried to analyze KM in SMEs.
This research proposes a new framework showing the determinant
role of organizational dimensions onto KM approaches. The paper
and its propositions are based on a literature review and analysis.
In this research, personalization versus codification,
individualization versus institutionalization and IT-based versus non
IT-based are highlighted as three distinct dimensions of knowledge
management approaches.
The study contributes to research by providing a more nuanced
classification of KM approaches and provides guidance to managers
about the types of KM approaches that should be adopted based on
the size, geographical dispersion and task nature of SMEs.
To the author-s knowledge, the paper is the first of its kind to
examine if there are suitable configurations of KM approaches for
SMEs with different dimensions. It gives valuable information, which
hopefully will help SME sector to accomplish KM.
Abstract: Interventional cardiologists are at greater risk from
radiation exposure as a result of the procedures they undertake than
most other medical specialists. A study was performed to evaluate
operator dose during interventional cardiology procedures and to
establish methods of operator dose reduction with a radiation
protective device. Different procedure technique and use of
protective tools can explain big difference in the annual equivalent
dose received by the professionals. Strategies to prevent and
monitor radiation exposure, advanced protective shielding and
effective radiation monitoring methods should be applied.
Abstract: This work presents a low-cost and eco-friendly
building material named Agrostone panel. Africa-s urban population
is growing at an annual rate of 2.8% and 62% of its population will
live in urban areas by 2050. As a consequence, many of the least
urbanized and least developed African countries- will face serious
challenges in providing affordable housing to the urban dwellers.
Since the cost of building materials accounts for the largest
proportion of the overall construction cost, innovating low-cost
building material is vital. Agrostone panel is used in housing projects
in Ethiopia. It uses raw materials of agricultural/industrial wastes
and/or natural minerals as a filler, magnesium-based chemicals as a
binder and fiberglass as reinforcement. Agrostone panel reduces the
cost of wall construction by 50% compared with the conventional
building materials. The pros and cons of Agrostone panel as well as
the use of other waste materials as a raw material to make the panel
more sustainable, low-cost and better properties are discussed.
Abstract: An autonomous environmental monitoring system
(Smart Landfill) has been constructed for the quantitative
measurement of the components of landfill gas found at borehole
wells at the perimeter of landfill sites. The main components of
landfill gas are the greenhouse gases, methane and carbon dioxide
and have been monitored in the range 0-5 % volume. This monitoring
system has not only been tested in the laboratory but has been
deployed in multiple field trials and the data collected successfully
compared with on-site monitors. This success shows the potential of
this system for application in environments where reliable gas
monitoring is crucial.