Abstract: Drought is one of the most damaging climate-related
hazards, it is generally considered as a prolonged absence of
precipitation. This normal and recurring climate phenomenon had
plagued civilization throughout history because of the negative
impacts on economical, environmental and social sectors. Drought
characteristics are thus recognized as important factors in water
resources planning and management. The purpose of this study is to
detect the changes in drought frequency, persistence and severity
in the Ruhr river basin. The frequency of drought events was
calculated using the Standardized Precipitation Index (SPI). Used
data are daily precipitation records from seven meteorological
stations covering the period 1961-2007. The main benefit of the
application of this index is its versatility, only rainfall data is required
to deliver five major dimensions of a drought : duration, intensity,
severity, magnitude, and frequency. Furthermore, drought can be
calculated in different time steps. In this study SPI was calculated for
1, 3, 6, 9, 12, and 24 months. Several drought events were detected
in the covered period, these events contain mild, moderate and severe
droughts. Also positive and negative trends in the SPI values were
observed.
Abstract: In order to characterize the soy protein hydrolysate obtained in this study, gel chromatography on Sephadex G-25 was used to perform the separation of the peptide mixture and electrophoresis in SDS-polyacrylamide gel has been employed. Protein hydrolysate gave high antioxidant activities, but didn't give any antimicrobial activities. The antioxidant activities of protein hydrolysate was in the same trend of peptide content which gave high antioxidant activities and high peptide content between fractions 15 to 50. With increasing peptide concentrations, the scavenging effect on DPPH radical increased until about 70%, thereafter reaching a plateau. In compare to different concentrations of BHA, which exhibited higher activity (90%), soybean protein hydrolysate exhibited high antioxidant activities (70%) at a concentration of 1.45 mg/ml at fraction 25. Electrophoresis analysis indicated that, low- MW hydrolysate fractions (F1) appeared, on average, to have higher DPPH scavenging activities than high-MW fractions. These results revealed that soybean peptides probably contain substances that were proton donors and could react with free radicals to convert them to stable diamagnetic molecules.
Abstract: The potential of entomopathogenic nematodes in suppressing T. squalida population on cauliflower from transplanting to harvest was evaluated. Significant reductions in plant infestation percentage and population density (/m2) were recorded throughout the plantation seasons, 2011 and 2012 before and after spraying the plants. The percent reduction in numbers/m2 was the highest in March for the treatments with Heterorhabditis indica Behera and Heterorhabditis bacteriophora Giza during the plantation season 2011, while at the plantation season 2012, the reduction in population density was the highest in January for Heterorhabditis Indica Behera and in February for H . bacteriophora Giza treatments. In a comparison test with conventional insecticides Hostathion and Lannate, there were no significant differences in control measures resulting from treatments with H. indica Behera, H. bacteriophora Giza and Lannate. At the plantation season is 2012. Also, the treatments reduced the economic threshold of T. squalida on cauliflower in this experiment as compared with before and after spraying with both the two entomopathogenic nematodes at both seasons 2011 and 2012. This means an increase in the marketability of heads harvested as a consequence of monthly treatments.
Abstract: Over the past several years, there has been a
considerable amount of research within the field of Quality of
Service (QoS) support for distributed multimedia systems. One of the
key issues in providing end-to-end QoS guarantees in packet
networks is determining a feasible path that satisfies a number of
QoS constraints. The problem of finding a feasible path is NPComplete
if number of constraints is more than two and cannot be
exactly solved in polynomial time. We proposed Feasible Path
Selection Algorithm (FPSA) that addresses issues with pertain to
finding a feasible path subject to delay and cost constraints and it
offers higher success rate in finding feasible paths.
Abstract: This paper presents an on-going research work on the
implementation of feature-based machining via macro programming.
Repetitive machining features such as holes, slots, pockets etc can
readily be encapsulated in macros. Each macro consists of methods
on how to machine the shape as defined by the feature. The macro
programming technique comprises of a main program and
subprograms. The main program allows user to select several
subprograms that contain features and define their important
parameters. With macros, complex machining routines can be
implemented easily and no post processor is required. A case study
on machining of a part that comprised of planar face, hole and pocket
features using the macro programming technique was carried out. It
is envisaged that the macro programming technique can be extended
to other feature-based machining fields such as the newly developed
STEP-NC domain.
Abstract: Data clustering is an important data exploration
technique with many applications in data mining. The k-means
algorithm is well known for its efficiency in clustering large data
sets. However, this algorithm is suitable for spherical shaped clusters
of similar sizes and densities. The quality of the resulting clusters
decreases when the data set contains spherical shaped with large
variance in sizes. In this paper, we introduce a competent procedure
to overcome this problem. The proposed method is based on shifting
the center of the large cluster toward the small cluster, and recomputing
the membership of small cluster points, the experimental
results reveal that the proposed algorithm produces satisfactory
results.
Abstract: Generation of electricity from coal has increased over
the years in the United States and around the world. Burning of coal
results in annual production of upwards of 100 millions tons (United
States only) of coal combustion products (CCPs). Only about a third
of these products are being used to create new products while the
remainder goes to landfills. Application of CCPs mixed with
composted organic materials onto soil can improve the soil-s
physico-chemical conditions and provide essential plant nutritients.
Our objective was to create plant growth media utilizing CCPs and
compost in way which maximizes the use of these products and, at
the same time, maintain good plant growth. Media were formulated
by adding composted organic matter (COM) to CCPs at ratios
ranging from 2:8 to 8:2 (v/v). The quality of these media was
evaluated by measuring their physical and chemical properties and
their effect on plant growth. We tested the media by 1) measuring
their physical and chemical properties and 2) the growth of three
plant species in the experimental media: wheat (Triticum sativum),
tomato (Lycopersicum esculentum) and marigold (Tagetes patula).
We achieved significantly (p < 0.001) higher growth (7-130%) in the
experimental media containing CCPs compared to a commercial mix.
The experimental media supplied adequate plant nutrition as no
fertilization was provided during the experiment. Based on the
results, we recommend the use of CCPs and composts for the
creation of plant growth media.
Abstract: We develop a new interface for Bus-Net which is
optimized for a smartphone. We are continuing to develop the shortest
path planning system of public transportation called "Bus-Net" in
Tottori prefecture as web application to improve the usability of
public transportation. Recent trend of computing platform, however
has shifted to an advanced mobile device called a smartphone such as
iPhone and Android in Japan. A smartphone has different characters
with existing feature phone in terms of OS, large touche panel, and
several other features. We derive a guideline to design the new interface
for a smartphone to full use of the functionality. The guideline is
about simplicity of user-s operation, location awareness and usability.
We developed the new interface for “Bus-Net" on iPhone referring
to the guideline. Due to the evaluation, the application interface we
developed is better than the existing web-based interface in terms of
the usability.
Abstract: This paper aims to propose a novel, robust, and simple method for obtaining a human 3D face model and camera pose (position and orientation) from a video sequence. Given a video sequence of a face recorded from an off-the-shelf digital camera, feature points used to define facial parts are tracked using the Active- Appearance Model (AAM). Then, the face-s 3D structure and camera pose of each video frame can be simultaneously calculated from the obtained point correspondences. This proposed method is primarily based on the combined approaches of Gradient Descent and Powell-s Multidimensional Minimization. Using this proposed method, temporarily occluded point including the case of self-occlusion does not pose a problem. As long as the point correspondences displayed in the video sequence have enough parallax, these missing points can still be reconstructed.
Abstract: This paper presents the analysis of similarity between local decisions, in the process of alphanumeric hand-prints classification. From the analysis of local characteristics of handprinted numerals and characters, extracted by a zoning method, the set of classification decisions is obtained and the similarity among them is investigated. For this purpose the Similarity Index is used, which is an estimator of similarity between classifiers, based on the analysis of agreements between their decisions. The experimental tests, carried out using numerals and characters from the CEDAR and ETL database, respectively, show to what extent different parts of the patterns provide similar classification decisions.
Abstract: This paper discusses the issue of tribal development,
displacement, rehabilitation and resettlement policies, and
implementation in the agency (scheduled / tribal) areas of the West
Godavari District, Andhra Pradesh State, India. This study is based
on action anthropological approach, conducted among the displaced
tribal communities i.e. Konda Reddis and Nayakapods of this region,
under the 'Kovvada Reservoir' Project. These groups are
traditionally shifting cultivators and popularly known as the
Primitive Tribal Groups (PTGs) in the government records. This
paper also focuses on the issues of tribal displacement and land
alienation due to construction of the Kovvada reservoir, without
proper rehabilitation and resettlement, although there are well
defined guidelines, procedures and norms for the rehabilitation of
Project Affected Persons (PAPs). It is necessary to begin with, to
provide an overview of the issues in tribal development and policies
related to displacement and rehabilitation in the Indian context as a
background to the Kovvada Reservoir Project, the subject of this
study.
Abstract: The rapid development of the BlackBerry games industry and its development goals were not just for entertainment, but also used for educational of students interactively. Unfortunately the development of adaptive educational games on BlackBerry in Indonesian language that interesting and entertaining for learning process is very limited. This paper shows the research of development of novel adaptive educational games for students who can adjust the difficulty level of games based on the ability of the user, so that it can motivate students to continue to play these games. We propose a method where these games can adjust the level of difficulty, based on the assessment of the results of previous problems using neural networks with three inputs in the form of percentage correct, the speed of answer and interest mode of games (animation / lessons) and 1 output. The experimental results are presented and show the adaptive games are running well on mobile devices based on BlackBerry platform
Abstract: This paper reports the findings of a research
conducted to evaluate the ownership and usage of technology devices
within Distance Education students- according to their age. This
research involved 45 Distance Education students from USM
Universiti Sains Malaysia (DEUSM) as its respondents. Data was
collected through questionnaire that had been developed by the
researchers based on some literature review. The data was analyzed
to find out the frequencies of respondents agreements towards
ownership of technology devices and the use of technology devices.
The findings shows that all respondents own mobile phone and
majority of them reveal that they use mobile on regular basis. The
student in the age 30-39 has the heist ownership of the technology
devices.
Abstract: The automatic construction of large, high-resolution
image vistas (mosaics) is an active area of research in the fields of
photogrammetry [1,2], computer vision [1,4], medical image
processing [4], computer graphics [3] and biometrics [8]. Image
stitching is one of the possible options to get image mosaics. Vista
Creation in image processing is used to construct an image with a
large field of view than that could be obtained with a single
photograph. It refers to transforming and stitching multiple images
into a new aggregate image without any visible seam or distortion in
the overlapping areas. Vista creation process aligns two partial
images over each other and blends them together. Image mosaics
allow one to compensate for differences in viewing geometry. Thus
they can be used to simplify tasks by simulating the condition in
which the scene is viewed from a fixed position with single camera.
While obtaining partial images the geometric anomalies like rotation,
scaling are bound to happen. To nullify effect of rotation of partial
images on process of vista creation, we are proposing rotation
invariant vista creation algorithm in this paper. Rotation of partial
image parts in the proposed method of vista creation may introduce
some missing region in the vista. To correct this error, that is to fill
the missing region further we have used image inpainting method on
the created vista. This missing view regeneration method also
overcomes the problem of missing view [31] in vista due to cropping,
irregular boundaries of partial image parts and errors in digitization
[35]. The method of missing view regeneration generates the missing
view of vista using the information present in vista itself.
Abstract: The theatre-auditorium under investigation following
the highly reflective characteristics of materials used in it (marble,
painted wood, smooth plaster, etc), architectural and structural
features of the Protocol and its intended use (very multifunctional:
Auditorium, theatre, cinema, musicals, conference room) from the
analysis of the statement of fact made by the acoustic simulation
software Ramsete and supported by data obtained through a
campaign of acoustic measurements of the state of fact made on the
spot by a Fonomet Svantek model SVAN 957, appears to be
acoustically inadequate. After the completion of the 3D model
according to the specifications necessary software used forecast in
order to be recognized by him, have made three simulations, acoustic
simulation of the state of and acoustic simulation of two design
solutions.
Improved noise characteristics found in the first design solution,
compared to the state in fact consists therefore in lowering
Reverberation Time that you turn most desirable value, while the
Indicators of Clarity, the Baricentric Time, the Lateral Efficiency,
Ratio of Low Tmedia BR and defined the Speech Intelligibility
improved significantly. Improved noise characteristics found instead
in the second design solution, as compared to first design solution, is
finally mostly in a more uniform distribution of Leq and in lowering
Reverberation Time that you turn the optimum values. Indicators of
Clarity, and the Lateral Efficiency improve further but at the expense
of a value slightly worse than the BR. Slightly vary the remaining
indices.
Abstract: In the present study, a support vector machine (SVM) learning approach to character recognition is proposed. Simple
feature detectors, similar to those found in the human visual system, were used in the SVM classifier. Alphabetic characters were rotated
to 8 different angles and using the proposed cognitive model, all characters were recognized with 100% accuracy and specificity.
These same results were found in psychiatric studies of human character recognition.
Abstract: In order to answer the general question: “What does a simple agent with a limited life-time require for constructing a useful representation of the environment?" we propose a robot platform including the simplest probabilistic sensory and motor layers. Then we use the platform as a test-bed for evaluation of the navigational capabilities of the robot with different “brains". We claim that a protocognitive behavior is not a consequence of highly sophisticated sensory–motor organs but instead emerges through an increment of the internal complexity and reutilization of the minimal sensory information. We show that the most fundamental robot element, the short-time memory, is essential in obstacle avoidance. However, in the simplest conditions of no obstacles the straightforward memoryless robot is usually superior. We also demonstrate how a low level action planning, involving essentially nonlinear dynamics, provides a considerable gain to the robot performance dynamically changing the robot strategy. Still, however, for very short life time the brainless robot is superior. Accordingly we suggest that small organisms (or agents) with short life-time does not require complex brains and even can benefit from simple brain-like (reflex) structures. To some extend this may mean that controlling blocks of modern robots are too complicated comparative to their life-time and mechanical abilities.
Abstract: Performance of vehicle depends on driving patterns
and vehicle drive train configuration. Driving patterns depends on
traffic condition, road condition and driver behavior. HEV design is
carried out under certain constrain like vehicle operating range,
acceleration, decelerations, maximum speed and road grades which
are directly related to the driving patterns. Therefore the detailed
study on HEV performance over a different drive cycle is required
for selection and sizing of HEV components. A simple hardware is
design to measured velocity v/s time profile of the vehicle by
operating vehicle on Indian roads under real traffic conditions. To
size the HEV components, a detailed dynamic model of the vehicle is
developed considering the effect of inertia of rotating components
like wheels, drive chain, engine and electric motor. Using vehicle
model and different Indian drive cycles data, total tractive power
demanded by vehicle and power supplied by individual components
has been calculated.Using above information selection and estimation
of component sizing for HEV is carried out so that HEV performs
efficiently under hostile driving condition. Complete analysis is
carried out in LABVIEW.
Abstract: Rhizopus oligosporus was used in the present study
for the production of protease enzyme under SSF. Sunflower meal
was used as by-product of oil industry incorporated with organic salts
was employed for the production of protease enzyme. The main
purpose of the present was to study different parameters of protease
productivity, its yields and to optimize basal fermentation conditions.
The optimal conditions found for protease production using
sunflower meal as a substrate in the present study were inoculum size
(1%), substrate (Sunflower meal), substrate concentration (20 g), pH
(3), cultivation period (72 h), incubation temperature (35oC),
substrate to diluent-s ratio (1:2) and tween 81 (1 mL). The maximum
production of protease in the presence of cheaper substrate at low
concentration and stability at acidic pH, these characteristics make
the strain and its enzymes useful in different industry.
Abstract: With increasing data in medical databases, medical
data retrieval is growing in popularity. Some of this analysis
including inducing propositional rules from databases using many
soft techniques, and then using these rules in an expert system.
Diagnostic rules and information on features are extracted from
clinical databases on diseases of congenital anomaly. This paper
explain the latest soft computing techniques and some of the
adaptive techniques encompasses an extensive group of methods
that have been applied in the medical domain and that are used for
the discovery of data dependencies, importance of features,
patterns in sample data, and feature space dimensionality
reduction. These approaches pave the way for new and interesting
avenues of research in medical imaging and represent an important
challenge for researchers.