Abstract: Groundwater has become the most dependable source
of fresh water for agriculture, domestic and industrial uses in the past
few decades. This wide use of groundwater if left uncontrolled and
unseen will lead to overexploitation causing sea water intrusion in the
coastal areas and illegal water marketing. Several Policies and Acts
have been enacted to regulate and manage the use of this valuable
resource. In spite of this the over extraction of groundwater beyond
the recharging capacity of aquifers and depletion in the quality of
groundwater is continuing. The current study aims at reviewing the
Acts and Policies existing in the State of Tamil Nadu and in the
National level regarding groundwater regulation and management.
Further an analysis is made on the rights associated with the usage of
groundwater resources and the gaps in these policies have been
analyzed. Some suggestions are made to reform the existing
groundwater policies for better management and regulation of the
resource.
Abstract: Buildings and associated construction methods have a significant impact on the environment. As construction activity increases in Kuwait, there is a need to create design and construction strategies which will minimize the environmental impact of new buildings. Green construction is a design philosophy intended to improve the sustainability of construction by the minimization of resource depletion and CO2 emissions throughout the life cycle of buildings. This paper presents and discusses the results of a survey that was conducted in Kuwait, with the objective of investigating the awareness of developers and other stakeholders regarding their understanding and use of green construction strategies. The results of the survey demonstrate that whilst there seems to be a reasonable level of awareness amongst the stakeholders, this awareness is not currently well reflected in the design and construction practices actually being applied. It is therefore concluded is there is a pressing need for intervention from Government in order that the use of sustainable green design and construction strategies becomes the norm in Kuwait.
Abstract: In this paper, we propose a hardware and software
design method for automotive Electronic Control Units (ECU)
considering the functional safety. The proposed ECU is considered for
the application to Electro-Mechanical Actuator systems and the
validity of the design method is shown by the application to the
Electro-Mechanical Brake (EMB) control system which is used as a
brake actuator in Brake-By-Wire (BBW) systems. The importance of a
functional safety-based design approach to EMB ECU design has been
emphasized because of its safety-critical functions, which are executed
with the aid of many electric actuators, sensors, and application
software. Based on hazard analysis and risk assessment according to
ISO26262, the EMB system should be ASIL-D-compliant, the highest
ASIL level. To this end, an external signature watchdog and an
Infineon 32-bit microcontroller TriCore are used to reduce risks
considering common-cause hardware failure. Moreover, a software
design method is introduced for implementing functional
safety-oriented monitoring functions based on an asymmetric dual
core architecture considering redundancy and diversity. The validity
of the proposed ECU design approach is verified by using the EMB
Hardware-In-the-Loop (HILS) system, which consists of the EMB
assembly, actuator ECU, a host PC, and a few debugging devices.
Furthermore, it is shown that the existing sensor fault tolerant control
system can be used more effectively for mitigating the effects of
hardware and software faults by applying the proposed ECU design
method.
Abstract: Modular multiplication is the basic operation
in most public key cryptosystems, such as RSA, DSA, ECC,
and DH key exchange. Unfortunately, very large operands
(in order of 1024 or 2048 bits) must be used to provide
sufficient security strength. The use of such big numbers
dramatically slows down the whole cipher system, especially
when running on embedded processors.
So far, customized hardware accelerators - developed on
FPGAs or ASICs - were the best choice for accelerating
modular multiplication in embedded environments. On the
other hand, many algorithms have been developed to speed
up such operations. Examples are the Montgomery modular
multiplication and the interleaved modular multiplication
algorithms. Combining both customized hardware with
an efficient algorithm is expected to provide a much faster
cipher system.
This paper introduces an enhanced architecture for computing
the modular multiplication of two large numbers X
and Y modulo a given modulus M. The proposed design is
compared with three previous architectures depending on
carry save adders and look up tables. Look up tables should
be loaded with a set of pre-computed values. Our proposed
architecture uses the same carry save addition, but replaces
both look up tables and pre-computations with an enhanced
version of sign detection techniques. The proposed architecture
supports higher frequencies than other architectures.
It also has a better overall absolute time for a single operation.
Abstract: This paper discusses a curriculum approach that will
give emphasis on practical portions of teaching network security
subjects in information and communication technology courses. As
we are well aware, the need to use a practice and application oriented
approach in education is paramount. Research on active learning and
cooperative groups have shown that students grasps more and have
more tendency towards obtaining and realizing soft skills like
leadership, communication and team work as opposed to the more
traditional theory and exam based teaching and learning. While this
teaching and learning paradigm is relatively new in Malaysia, it has
been practiced widely in the West. This paper examines a certain
approach whereby students learning wireless security are divided into
and work in small and manageable groups where there will be 2
teams which consist of black hat and white hat teams. The former
will try to find and expose vulnerabilities in a wireless network while
the latter will try their best to prevent such attacks on their wireless
networks using hardware, software, design and enforcement of
security policy and etc. This paper will try to show that the approach
taken plus the use of relevant and up to date software and hardware
and with suitable environment setting will hopefully expose students
to a more fruitful outcome in terms of understanding of concepts,
theories and their motivation to learn.
Abstract: An experiment was conducted using two aeration
methods (water-into-air and air-into-water) and followed by filtration
processes using manganese greensand material. The properties of
groundwater such as pH, dissolved oxygen, turbidity and heavy metal
concentration (iron and manganese) will be assessed. The objectives
of this study are i) to determine the effective aeration method and ii)
to assess the effectiveness of manganese greensand as filter media in
removing iron and manganese concentration in groundwater. Results
showed that final pH for all samples after treatment are in range from
7.40 and 8.40. Both aeration methods increased the dissolved oxygen
content. Final turbidity for groundwater samples are between 3 NTU
to 29 NTU. Only three out of eight samples achieved iron
concentration of 0.3mg/L and less and all samples reach manganese
concentration of 0.1mg/L and less. Air-into-water aeration method
gives higher percentage of iron and manganese removal compare to
water-into-air method.
Abstract: The Economic factors are leading to the rise of
infrastructures provides software and computing facilities as a
service, known as cloud services or cloud computing. Cloud services
can provide efficiencies for application providers, both by limiting
up-front capital expenses, and by reducing the cost of ownership over
time. Such services are made available in a data center, using shared
commodity hardware for computation and storage. There is a varied
set of cloud services available today, including application services
(salesforce.com), storage services (Amazon S3), compute services
(Google App Engine, Amazon EC2) and data services (Amazon
SimpleDB, Microsoft SQL Server Data Services, Google-s Data
store). These services represent a variety of reformations of data
management architectures, and more are on the horizon.
Abstract: The bromination of five selected pharmaceuticals
(metoprolol, naproxen, amoxicillin, hydrochlorotiazide and
phenacetin) in ultrapure water and in three water matrices (a
groundwater, a surface water from a public reservoir and a secondary
effluent from a WWTP) was investigated. The apparent rate
constants for the bromination reaction were determined as a function
of the pH, and the sequence obtained for the reaction rate was
amoxicillin > naproxen >> hydrochlorotiazide ≈ phenacetin ≈
metoprolol. The proposal of a kinetic mechanism, which specifies the
dissociation of bromine and each pharmaceutical according to their
pKa values and the pH allowed the determination of the intrinsic rate
constants for every elementary reaction. The influence of the main
operating conditions (pH, initial bromine dose, and the water matrix)
on the degradation of pharmaceuticals was established. In addition,
the presence of bromide in chlorination experiments was
investigated. The presence of bromide in wastewaters and drinking
waters in the range of 10 to several hundred μg L-1 accelerated
slightly the oxidation of the selected pharmaceuticals during chorine
disinfection.
Abstract: Abstraction of water from the dry river sand-beds is
well-known as an alternative source of water during dry seasons.
Internally, because of the form of sand particles, voids are created
which can store water in the riverbeds. Large rivers are rare in South
Africa. Many rivers are sand river types and without water during the
prolonged dry periods. South Africa has not taken full advantage of
water storage in sand as a solution to the growing water scarcity both
in urban and rural areas. The paper reviews the benefits of run-off
storage in sand reservoirs gained from other arid areas and need for
adoption in rural areas of South Africa as an alternative water supply
where it is probable.
Abstract: In this paper, a recursive algorithm for the
computation of 2-D DCT using Ramanujan Numbers is proposed.
With this algorithm, the floating-point multiplication is completely
eliminated and hence the multiplierless algorithm can be
implemented using shifts and additions only. The orthogonality of
the recursive kernel is well maintained through matrix factorization
to reduce the computational complexity. The inherent parallel
structure yields simpler programming and hardware implementation
and provides
log 1
2
3
2 N N-N+
additions and
N N
2 log
2 shifts which is
very much less complex when compared to other recent multiplierless
algorithms.
Abstract: Eco-driving allows the driver to optimize his/her behaviour in order to achieve several types of benefits: reducing pollution emissions, increasing road safety, and fuel saving. One of the main rules for adopting eco-driving is to anticipate the traffic events by avoiding strong acceleration or braking and maintaining a steady speed when possible. Therefore, drivers have to comply with speed limits and time headway. The present study explored the role of three types of motivation and social norms in predicting French drivers- intentions to comply with speed limits and time headway as eco-driving practices as well as examine the variations according to gender and age. 1234 drivers with ages between 18 and 75 years old filled in a questionnaire which was presented as part of an online survey aiming to better understand the drivers- road habits. It included items assessing: a) behavioural intentions to comply with speed limits and time headway according to three types of motivation: reducing pollution emissions, increasing road safety, and fuel saving, b) subjective and descriptive social norms regarding the intention to comply with speed limits and time headway, and c) sociodemographical variables. Drivers expressed their intention to frequently comply with speed limits and time headway in the following 6 months; however, they showed more intention to comply with speed limits as compared to time headway regardless of the type of motivation. The subjective injunctive norms were significantly more important in predicting drivers- intentions to comply with speed limits and time headway as compared to the descriptive norms. In addition, the most frequently reported type of motivation for complying with speed limits and time headway was increasing road safety followed by fuel saving and reducing pollution emissions, hence underlining a low motivation to practice eco-driving. Practical implications of the results are discussed.
Abstract: Local Linear Neuro-Fuzzy Models (LLNFM) like other neuro- fuzzy systems are adaptive networks and provide robust learning capabilities and are widely utilized in various applications such as pattern recognition, system identification, image processing and prediction. Local linear model tree (LOLIMOT) is a type of Takagi-Sugeno-Kang neuro fuzzy algorithm which has proven its efficiency compared with other neuro fuzzy networks in learning the nonlinear systems and pattern recognition. In this paper, a dedicated reconfigurable and parallel processing hardware for LOLIMOT algorithm and its applications are presented. This hardware realizes on-chip learning which gives it the capability to work as a standalone device in a system. The synthesis results on FPGA platforms show its potential to improve the speed at least 250 of times faster than software implemented algorithms.
Abstract: The aim of research project is to evaluate quantity and
quality for conjunctive use of groundwater and surface water in lower
in the Lower Nam Kam area, Thailand, even though there have been
hints of saline soil and water. The mathematical model named
WUSMO and MIKE Basin were applied for the calculation of crop
water utilization. Results of the study showed that, in irrigation
command area, water consumption rely on various sources; rain water
21.56%, irrigation water 78.29%, groundwater and some small surface
storage 0.15%. Meanwhile, for non-irrigation command area, water
consumption depends on the Nam Kam and Nambang stream 42%,
rain water 36.75% and groundwater and some small surface storage
19.18%. Samples of surface water and groundwater were collected for
2 seasons. The criterion was determined for the assessment of suitable
water for irrigation. It was found that this area has very limited sources
of suitable water for irrigation.
Abstract: The tray/multi-tray distillation process is a topic that
has been investigated to great detail over the last decade by many
teams such as Jubran et al. [1], Adhikari et al. [2], Mowla et al. [3],
Shatat et al. [4] and Fath [5] to name a few. A significant amount of
work and effort was spent focusing on modeling and/simulation of
specific distillation hardware designs. In this work, we have focused
our efforts on investigating and gathering experimental data on
several engineering and design variables to quantify their influence
on the yield of the multi-tray distillation process. Our goals are to
generate experimental performance data to bridge some existing gaps
in the design, engineering, optimization and theoretical modeling
aspects of the multi-tray distillation process.
Abstract: Modern applications realized onto FPGAs exhibit high connectivity demands. Throughout this paper we study the routing constraints of Virtex devices and we propose a systematic methodology for designing a novel general-purpose interconnection network targeting to reconfigurable architectures. This network consists of multiple segment wires and SB patterns, appropriately selected and assigned across the device. The goal of our proposed methodology is to maximize the hardware utilization of fabricated routing resources. The derived interconnection scheme is integrated on a Virtex style FPGA. This device is characterized both for its high-performance, as well as for its low-energy requirements. Due to this, the design criterion that guides our architecture selections was the minimal Energy×Delay Product (EDP). The methodology is fully-supported by three new software tools, which belong to MEANDER Design Framework. Using a typical set of MCNC benchmarks, extensive comparison study in terms of several critical parameters proves the effectiveness of the derived interconnection network. More specifically, we achieve average Energy×Delay Product reduction by 63%, performance increase by 26%, reduction in leakage power by 21%, reduction in total energy consumption by 11%, at the expense of increase of channel width by 20%.
Abstract: In this paper, low end Digital Signal Processors (DSPs)
are applied to accelerate integer neural networks. The use of DSPs
to accelerate neural networks has been a topic of study for some
time, and has demonstrated significant performance improvements.
Recently, work has been done on integer only neural networks, which
greatly reduces hardware requirements, and thus allows for cheaper
hardware implementation. DSPs with Arithmetic Logic Units (ALUs)
that support floating or fixed point arithmetic are generally more
expensive than their integer only counterparts due to increased circuit
complexity. However if the need for floating or fixed point math
operation can be removed, then simpler, lower cost DSPs can be
used. To achieve this, an integer only neural network is created in
this paper, which is then accelerated by using DSP instructions to
improve performance.
Abstract: The proper assessment of interaxial distance and
convergence control are important factors in stereoscopic imaging
technology to make an efficient 3D image. To control interaxial
distance and convergence for efficient 3D shooting, horizontal 3D
camera rig is designed using some hardware components like 'LM
Guide', 'Goniometer' and 'Rotation Stage'. The horizontal 3D camera
rig system can be properly aligned by moving the two cameras
horizontally in same or opposite directions, by adjusting the camera
angle and finally considering horizontal swing as well as vertical
swing. In this paper, the relationship between interaxial distance and
convergence angle control are discussed and intensive experiments are
performed in order to demonstrate an easy and effective 3D shooting.
Abstract: Groundwater is one of the most important water
resources in Fars province. Based on this study, 95 percent of the
total annual water consumption in Fars is used for agriculture,
whereas the percentages for domestic and industrial uses are 4 and 1
percent, respectively. Population growth, urban and industrial
growth, and agricultural development in Fars have created a
condition of water stress. In this province, farmers and other users are
pumping groundwater faster than its natural replenishment rate,
causing a continuous drop in groundwater tables and depletion of this
resource. In this research variation of groundwater level, their effects
and ways to help control groundwater levels in aquifer of the Niriz
plains in Fars plain were evaluated .Excessive exploitation of
groundwater in this aquifer caused the groundwater levels fall too
fast or to unacceptable levels. The average drawdown of the
groundwater level in this plain were 9.1 meters during 1997 to
2004. The purpose of this study is to evaluate water level changes in
the Niriz Aquifer in the Fars province in order to determine the areas
of greatest depletion, the cause of depletion, and predict the
remaining life of the aquifer.
Abstract: Knowledge is indispensable but voluminous knowledge becomes a bottleneck for efficient processing. A great challenge for data mining activity is the generation of large number of potential rules as a result of mining process. In fact sometimes result size is comparable to the original data. Traditional data mining pruning activities such as support do not sufficiently reduce the huge rule space. Moreover, many practical applications are characterized by continual change of data and knowledge, thereby making knowledge voluminous with each change. The most predominant representation of the discovered knowledge is the standard Production Rules (PRs) in the form If P Then D. Michalski & Winston proposed Censored Production Rules (CPRs), as an extension of production rules, that exhibit variable precision and supports an efficient mechanism for handling exceptions. A CPR is an augmented production rule of the form: If P Then D Unless C, where C (Censor) is an exception to the rule. Such rules are employed in situations in which the conditional statement 'If P Then D' holds frequently and the assertion C holds rarely. By using a rule of this type we are free to ignore the exception conditions, when the resources needed to establish its presence, are tight or there is simply no information available as to whether it holds or not. Thus the 'If P Then D' part of the CPR expresses important information while the Unless C part acts only as a switch changes the polarity of D to ~D. In this paper a scheme based on Dempster-Shafer Theory (DST) interpretation of a CPR is suggested for discovering CPRs from the discovered flat PRs. The discovery of CPRs from flat rules would result in considerable reduction of the already discovered rules. The proposed scheme incrementally incorporates new knowledge and also reduces the size of knowledge base considerably with each episode. Examples are given to demonstrate the behaviour of the proposed scheme. The suggested cumulative learning scheme would be useful in mining data streams.
Abstract: Tablet computers and Multifunctional Hardcopy Devices (MHDs) are common devices in daily life. Though, many scientific studies have not been published. The tablet computers are straightforward to use whereas the MHDs are comparatively difficult to use. Thus, to assist different levels of users, we propose combining these two devices to achieve straightforward intelligent user interface (UI) and versatile What You See Is What You Get (WYSIWYG) document management and production. Our approach to this issue is to design an intelligent user dependent UI for a MHD applying a tablet computer. Furthermore, we propose hardware interconnection and versatile intelligent software between these two devices. In this study, we first provide a state-of-the-art survey on MHDs and tablet computers, and their interconnections. Secondly we provide a comparative UI survey on two state-of-the-art MHDs with a proposal of a novel UI for the MHDs using Jakob Nielsen-s Ten Usability Heuristics Evaluation.