Abstract: The postharvest quality management of tomatoes is
important to limit the amount of losses that occur due to deterioration
between harvest and consumption. This study was undertaken to
investigate the effects of pre- and postharvest integrated agrotechnologies,
involving greenhouse microclimate and postharvest
storage conditions, on the postharvest quality attributes of four
tomato cultivars. Tomato fruit firmness, colour (hue angle (h°) and
L* value), pH and total soluble solids for the cultivars Bona,
Star 9037, Star 9009 and Zeal, grown in a fan-pad evaporativelycooled
and an open-ended naturally-ventilated tunnel, were harvested
at the mature-green stage. The tomatoes were stored for 28 days
under cold storage conditions, with a temperature of 13°C and RH of
85%, and under ambient air conditions, with a temperature of 23±
2°C and RH of 52± 4%. This study has provided information on the
effect of integrated pre-harvest and postharvest agro-technologies,
involving greenhouse microclimate and postharvest storage
environment on the postharvest quality attributes of four of the
tomato cultivars in South Africa. NVT-grown tomatoes retained
better textural qualities, but ripened faster by changing from green to
red faster, although these were reduced under cold storage conditions.
FPVT-grown tomatoes had lower firmness, but ripened slowly with
higher colour attributes. With cold storage conditions, the firmness of
FPVT-grown tomatoes was maintained. Cultivar Bona firmness and
colour qualities depreciated the fastest, but it had higher TSS content
and lower pH values. Star 9009 and Star 9037 presented better
quality, by retaining higher firmness and ripening slowly, but they
had the lowest TSS contents and high pH values, especially
Star 9037. Cold storage improved the firmness of tomato cultivars
with poor textural quality and faster colour changes.
Abstract: In this study, we aim to demonstrate a microgrid
system experimental simulation for an easy understanding of a
large-scale microgrid system. This model is required for industrial
training and learning environments. However, in order to create an
exact representation of a microgrid system, the laboratory-scale
system must fulfill the requirements of a grid-connected inverter, in
which power values are assigned to the system to cope with the
intermittent output from renewable energy sources. Aside from that,
during fluctuations in load capacity, the grid-connected system must
be able to supply power from the utility grid side and microgrid side in
a balanced manner. Therefore, droop control is installed in the
inverter’s control board to maintain a balanced power sharing in both
sides. This power control in a stand-alone condition and droop control
in a grid-connected condition must be implemented in order to
maintain a stabilized system. Based on the experimental results, power
control and droop control can both be applied in the system by
comparing the experimental and reference values.
Abstract: This study is purposed to develop an efficient fault
detection method for Global Navigation Satellite Systems (GNSS)
applications based on adaptive noise covariance estimation. Due to the
dependence on radio frequency signals, GNSS measurements are
dominated by systematic errors in receiver’s operating environment.
In the proposed method, the pseudorange and carrier-phase
measurement noise covariances are obtained at time propagations and
measurement updates in process of Carrier-Smoothed Code (CSC)
filtering, respectively. The test statistics for fault detection are
generated by the estimated measurement noise covariances. To
evaluate the fault detection capability, intentional faults were added to
the filed-collected measurements. The experiment result shows that
the proposed method is efficient in detecting unhealthy measurements
and improves GNSS positioning accuracy against fault occurrences.
Abstract: Supermarkets are the most electricity-intensive type of
commercial buildings. The unsuitable indoor environment of a
supermarket provided by abnormal HVAC operations incurs waste
energy consumption in refrigeration systems. This current study
briefly describes significantly solid backgrounds and proposes easyto-
use analysis terminology for investigating the impact of HVAC
operations on refrigeration power consumption using the field-test
data obtained from building automation system (BAS). With solid
backgrounds and prior knowledge, expected energy interactions
between HVAC and refrigeration systems are proposed through
Pearson’s correlation analysis (R value) by considering correlations
between equipment power consumption and dominantly independent
variables (driving force conditions).The R value can be conveniently
utilized to evaluate how strong relations between equipment
operations and driving force parameters are. The calculated R values
obtained from field data are compared to expected ranges of R values
computed by energy interaction methodology. The comparisons can
separate the operational conditions of equipment into faulty and
normal conditions. This analysis can simply investigate the condition
of equipment operations or building sensors because equipment could
be abnormal conditions due to routine operations or faulty
commissioning processes in field tests. With systematically solid and
easy-to-use backgrounds of interactions provided in the present
article, the procedures can be utilized as a tool to evaluate the proper
commissioning and routine operations of HVAC and refrigeration
systems to detect simple faults (e.g. sensors and driving force
environment of refrigeration systems and equipment set-point) and
optimize power consumption in supermarket buildings. Moreover,
the analysis will be used to further study the FDD research for
supermarkets in future.
Abstract: Apps are today the most important possibility to adapt
mobile phones and computers to fulfill the special needs of their
users. Location- and context-sensitive programs are hereby the key to
support the interaction of the user with his/her environment and also
to avoid an overload with a plenty of dispensable information. The
contribution shows, how a trusted, secure and really bi-directional
communication and interaction among users and their environment
can be established and used, e.g. in the field of home automation.
Abstract: Renewable energy is derived from natural processes
that are replenished constantly. Included in the definition is
electricity and heat generated from solar, wind, ocean, hydropower,
biomass, geothermal resources, and bio-fuels and hydrogen derived
from renewable resources. Each of these sources has unique
characteristics which influence how and where they are used. This
paper presents the modeling the simulation of solar and hydro hybrid
energy sources in MATLAB/SIMULINK environment. It simulates
all quantities of Hybrid Electrical Power system (HEPS) such as AC
output current of the inverter that injected to the load/grid, load
current, grid current. It also simulates power output from PV and
Hydraulic Turbine Generator (HTG), power delivered to or from grid
and finally power factor of the inverter for PV, HTG and grid. The
proposed circuit uses instantaneous p-q (real-imaginary) power
theory.
Abstract: The current study explored the effect of economic
development, financial development and institutional quality on
environmental destruction in upper-middle income countries during
the time period of 1999-2011. The dependent variable is logarithm of
carbon dioxide emissions that can be considered as an index for
destruction or quality of the environment given to its effects on the
environment. Financial development and institutional development
variables as well as some control variables were considered. In order
to study cross-sectional correlation among the countries under study,
Pesaran and Friz test was used. Since the results of both tests show
cross-sectional correlation in the countries under study, seemingly
unrelated regression method was utilized for model estimation. The
results disclosed that Kuznets’ environmental curve hypothesis is
confirmed in upper-middle income countries and also, financial
development and institutional quality have a significant effect on
environmental quality. The results of this study can be considered by
policy makers in countries with different income groups to have
access to a growth accompanied by improved environmental quality.
Abstract: Due to the advancement of Internet technology, online
learning is widely used in higher education institutions. Online
learning offers several means of communication, including online
forum. Through online forum, students and instructors are able to
discuss and share their knowledge and expertise without having a
need to attend the face-to-face, ordinary classroom session. The
purposes of this study are to analyze the students’ levels of
participation and critical thinking, types of action and factors
influencing their participation in online forum. A total of 41
postgraduate students undertaking a course in educational technology
from a public university in Malaysia were involved in this study. In
this course, the students participated in a weekly online forum as part
of the course requirement. Based on the log data file extracted from
the online forum, the students’ type of actions (view, add, update,
delete posts) and their levels of participation (passive, moderate or
active) were identified. In addition, the messages posted in the forum
were analyzed to gauge their level of critical thinking. Meanwhile,
the factors that might influence their online forum participation were
measured using a 24-items questionnaire. Based on the log data, a
total of 105 posts were sent by the participants. In addition, the
findings show that (i) majority of the students are moderate
participants, with an average of two to three posts per person, (ii)
viewing posts are the most frequent type of action (85.1%), and
followed by adding post (9.7%). Furthermore, based on the posts
they made, the most frequent type of critical thinking observed was
justification (50 input or 19.0%), followed by linking ideas and
interpretation (47 input or 18%), and novelty (38 input or 14.4%).
The findings indicate that online forum allows for social interaction
and can be used to measure the students’ critical thinking skills. In
order to achieve this, monitoring students’ activities in the online
forum is recommended.
Abstract: The asynchronous discussion forum is one of the most
widely used activities in learning management system environment.
Online forum allows participants to interact, construct knowledge,
and can be used to complement face to face sessions in blended
learning courses. However, to what extent do the students perceive
the benefits or advantages of forum remain to be seen. Through
content and social network analyses, instructors will be able to gauge
the students’ engagement and knowledge construction level. Thus,
this study aims to analyze the students’ level of knowledge
construction and their participation level that occur through online
discussion. It also attempts to investigate the relationship between the
level of knowledge construction and their social interaction patterns.
The sample involves 23 students undertaking a master course in one
public university in Malaysia. The asynchronous discussion forum
was conducted for three weeks as part of the course requirement. The
finding indicates that the level of knowledge construction is quite
low. Also, the density value of 0.11 indicating the overall
communication among the participants in the forum is low. This
study reveals that strong and significant correlations between SNA
measures (in-degree centrality, out-degree centrality) and level of
knowledge construction. Thus, allocating these active students in
different group aids the interactive discussion takes place. Finally,
based upon the findings, some recommendations to increase students’
level of knowledge construction and also for further research are
proposed.
Abstract: Cloud service brokering is a new service paradigm that
provides interoperability and portability of application across multiple
Cloud providers. In this paper, we designed Cloud service brokerage
system, anyBroker, supporting integrated service provisioning and
SLA based service lifecycle management. For the system design, we
introduce the system concept and whole architecture, details of main
components and use cases of primary operations in the system. These
features ease the Cloud service provider and customer’s concern and
support new Cloud service open market to increase Cloud service
profit and prompt Cloud service echo system in Cloud computing
related area.
Abstract: This article describes the information system for
measuring and evaluating the dose rate in the environment of nuclear
power plants Mochovce and Bohunice in Slovakia.
The article presents the results achieved in the implementation of
the EU project – Research of monitoring and evaluation of nonstandard
conditions in the area of nuclear power plants. The
objectives included improving the system of acquisition, measuring
and evaluating data with mobile and autonomous units applying new
knowledge from research.
The article provides basic and specific features of the system and
compared to the previous version of the system, also new functions.
Abstract: The aim of this paper is to propose a novel technique
to guarantee Quality of Service (QoS) in a highly dynamic
environment. The MANET changes its topology dynamically as the
nodes are moved frequently. This will cause link failure between
mobile nodes. MANET cannot ensure reliability without delay. The
relay node is selected based on achieving QoS in previous
transmission. It considers one more factor Connection Existence
Period (CEP) to ensure reliability. CEP is to find out the period
during that connection exists between the nodes. The node with
highest CEP becomes a next relay node. The relay node is selected
dynamically to avoid frequent failure. The bandwidth of each link
changed dynamically based on service rate and request rate. This
paper proposes Active bandwidth setting up algorithm to guarantee
the QoS. The series of results obtained by using the Network
Simulator (NS-2) demonstrate the viability of our proposed
techniques.
Abstract: The purpose of this project is to carry out an analysis
and determine the profile of actual lean manufacturing processes in
the Metropolitan Area of Bucaramanga. Through the analysis of
qualitative and quantitative variables it was possible to establish how
these manufacturers develop production practices that ensure their
competitiveness and productivity in the market.
In this study, a random sample of metallurgic and wrought iron
companies was applied, following which a quantitative focus and
analysis was used to formulate a qualitative methodology for
measuring the level of lean manufacturing procedures in the industry.
A qualitative evaluation was also carried out through a multivariate
analysis using the Numerical Taxonomy System (NTSYS) program
which should allow for the determination of Lean Manufacturing
profiles.
Through the results it was possible to observe how the companies
in the sector are doing with respect to Lean Manufacturing Practices,
as well as identify the level of management that these companies
practice with respect to this topic. In addition, it was possible to
ascertain that there is no one dominant profile in the sector when it
comes to Lean Manufacturing.
It was established that the companies in the metallurgic and
wrought iron industry show low levels of Lean Manufacturing
implementation. Each one carries out diverse actions that are
insufficient to consolidate a sectoral strategy for developing a
competitive advantage which enables them to tie together a
production strategy.
Abstract: FengShui, an old Chinese discipline, dates back to
more than 5000 years, is one of the design principles that aim at
creating habitable and sustainable spaces in harmony with nature by
systematizing data within its own structure. Having emerged from
Chinese mysticism and embodying elements of faith in its principles,
FengShui argues that the positive energy in the environment channels
human behavior and psychology. This argument is supported with the
thesis of quantum physics that ‘everything is made up of energy’ and
gains an important place.
In spaces where living and working take place with several
principles and systematized rules, FengShui promises a happier, more
peaceful and comfortable life by influencing human psychology, acts,
and soul as well as the professional and social life of the individual.
Observing these design properties in houses, workplaces, offices, the
environment, and daily life as a design paradigm is significant. In this
study, how FengShui, a Central Asian culture emanated from Chinese
mysticism, shapes design and how it is used as an element of
sustainable design will be explained.
Abstract: Stress Corrosion Crack (SCC) in pipeline is a type of
environmentally assisted cracking (EAC), since its discovery in 1965
as a possible cause of failure in pipeline, SCC has caused, on
average, one of two failures per year in the U.S, According to the
NACE SCC DA a pipe line segment is considered susceptible to SCC
if all of the following factors are met: The operating stress exceeds
60% of specified minimum yield strength (SMYS), the operating
temperature exceeds 38°C, the segment is less than 32 km
downstream from a compressor station, the age of the pipeline is
greater than 10 years and the coating type is other than Fusion
Bonded Epoxy(FBE). In this paper as a practical experience in
NISOC, Direct Assessment (DA) Method is used for identification
SCC defect in unpiggable pipeline located downstream of
compressor station.
Abstract: In this paper, snow samples containing dust particles
from several sampling points around the city of Ostrava were
analyzed. The pH values of sampled snow were measured and solid
particles analyzed. Particle size, zeta potential and content of selected
heavy metals were determined in solid particles. The pH values of
most samples lay in the slightly acid region. Mean values of particle
size ranged from 290.5 to 620.5 nm. Zeta potential values varied
between -5 and -26.5 mV. The following heavy metal concentration
ranges were found: copper 0.08-0.75 mg/g, lead 0.05-0.9 mg/g,
manganese 0.45-5.9 mg/g and iron 25.7-280.46 mg/g. The highest
values of copper and lead were found in the vicinity of busy
crossroads, and on the contrary, the highest levels of manganese and
iron were detected close to a large steelworks. The proportion
between pH values, zeta potentials, particle sizes and heavy metal
contents was established. Zeta potential decreased with rising pH
values and, simultaneously, heavy metal content in solid particles
increased. At the same time, higher metal content corresponded to
lower particle size.
Abstract: Human movement in the real world provides
important information for developing human behaviour models and
simulations. However, it is difficult to assess ‘real’ human behaviour
since there is no established method available. As part of the AUNTSUE
(Accessibility and User Needs in Transport – Sustainable Urban
Environments) project, this research aimed to propose a method to
assess human movement and behaviour in crowded areas. The
method is based on the three major steps of video recording,
conceptual behavior modelling and video analysis. The focus is on
individual human movement and behaviour in normal situations
(panic situations are not considered) and the interactions between
individuals in localized areas. Emphasis is placed on gaining
knowledge of characteristics of human movement and behaviour in
the real world that can be modelled in the virtual environment.
Abstract: Online forum is part of a Learning Management
System (LMS) environment in which students share their opinions.
This study attempts to investigate the perceptions of students towards
online forum and their patterns of listening behavior during the forum
interaction. The students’ perceptions were measured using a
questionnaire, in which seven dimensions were used involving online
experience, benefits of forum participation, cost of participation,
perceived ease of use, usefulness, attitude, and intention. Meanwhile,
their patterns of listening behaviors were obtained using the log file
extracted from the LMS. A total of 25 postgraduate students
undertaking a course were involved in this study, and their activities
in the forum session were recorded by the LMS and used as a log file.
The results from the questionnaire analysis indicated that the students
perceived that the forum is easy to use, useful, and bring benefits to
them. Also, they showed positive attitude towards online forum, and
they have the intention to use it in future. Based on the log data, the
participants were also divided into six clusters of listening behavior,
in which they are different in terms of temporality, breadth, depth and
speaking level. The findings were compared to previous clusters
grouping and future recommendations are also discussed.
Abstract: Hot aqueous and methanol extracts of the two selected
herbal medicines such are Vellarugu chooranam (V.C) and
Amukkirai Chooranam (A.C) were examined for total phenolic and
flavonoid contents and in vitro antioxidant activity using four
different methods. The total phenolic and flavonoid contents in
methanol extract of V.C were found to be higher (44.41±1.26mg
GAE/g; 174.44±9.32mg QE/g) than in the methanol extract of A.C
(20.56±0.67mg GAE/g; 7.21±0.85mg QE/g). Hot methanol and
aqueous extracts of both medicines showed low antioxidant activity
in DPPH, ABTS, and FRAP methods and Iron chelating activity not
found at highest possible concentration. V.C contains higher
concentrations of total phenolic and flavonoid contents than A.C and
can also exert greater antioxidant activity than A.C, although the
activities demonstrated were lower than the positive control Trolox.
The in vitro antioxidant activity was not related with the total
phenolic and flavonoid contents of the methanol and aqueous extracts
of both herbal medicines (A.C and V.C).
Abstract: This paper presents a method for the efficient
implementation of a unidirectional or bidirectional DC/DC converter.
The DC/DC converter is used essentially for energy exchange
between the low voltage service battery and a high voltage battery
commonly found in Electric Vehicle applications. In these
applications, apart from cost, efficiency of design is an important
characteristic. A useful way to reduce the size of electronic
equipment in the electric vehicles is proposed in this paper. The
technique simplifies the mechanical complexity and maximizes the
energy usage using the latest converter control techniques. Moreover
a bidirectional battery charger for hybrid electric vehicles is also
implemented in this paper. Several simulations on the test system
have been carried out in Matlab/Simulink environment. The results
exemplify the robustness of the proposed design methodology in case
of a 1.5 KW DC-DC converter.