Abstract: The extraction of meaningful information from image
could be an alternative method for time series analysis. In this paper,
we propose a graphical analysis of time series grouped into table
with adjusted colour scale for numerical values. The advantages of
this method are also discussed. The proposed method is easy to
understand and is flexible to implement the standard methods of
pattern recognition and verification, especially for noisy
environmental data.
Abstract: This work is an attempt to use the standard Smoothed
Particle Hydrodynamics methodology for the simulation of the
complex unsteady, free-surface flow in a rotating Turgo impulse
water turbine. A comparison of two different geometries was
conducted. The SPH method due to its mesh-less nature is capable of
capturing the flow features appearing in the turbine, without
diffusion at the water/air interface. Furthermore results are compared
with a commercial CFD package (Fluent®) and the SPH algorithm
proves to be capable of providing similar results, in much less time
than the mesh based CFD program. A parametric study was also
performed regarding the turbine inlet angle.
Abstract: The contamination of 15 ground water resources
of a selected region earmarked for the emergency supply
of population has been monitored. The resources have been selected
on the basis of previous assessment of natural conditions
and the exploitation of territory in their surroundings and infiltration
area. Two resources out of 15 have been excluded from further
exploitation, because they have not met some of the 72 assessed
hygienic indicators of extended analysis. The remaining 13 resources
have been the subject of health risk analysis in relation
to the contamination by arsenic, lead, cadmium, mercury, nickel and
manganese. The risk analysis proved that all 13 resources meet
health standards with regard to the above mentioned purposefully
selected elements and may thus be included into crisis plans. Water
quality of ground resources may be assessed in the same way
with regard to other contaminants.
Abstract: The non-destructive testing of launch tube weld with
radiography was investigated and evaluated with AWS D1.1
standard. The paper started with preparation of launch tube and
radiographic inspection. X-Ray inspection then was done and gotten
the result. The judgment of inspection results were concluded by
certified person and finally, the evaluation with AWS D1.1 standard
was conducted as well.
The result shown that weld position P1 was not conformed to
AWS D1.1 which allowed size of incomplete penetration did not
exceed 4 mm. The other welds were corresponded to as mentioned
standard. Additionally, the corrective actions for incomplete
penetration either provided for future actions.
Abstract: This paper is aimed to study the roles of leadership and innovation in the development of local people based ecotourism
services. The survey is conducted in Candirejo village, Borobudur District, Magelang Regency. The study of a descriptive approach is employed to identify people's behavior in ecotourism services. The results showed that ecotourism services have developed and provided benefits to the people. The roles of leadership and innovation interact positively with a cooperative to organize an ecotourism services management. The leadership is able to identify substances, to do the vision and missions of environmental and cultural conservation. The innovation provides alternative development efforts and increases the added value of ecotourism. The cooperative management was able to support a process to realize the goals of ecotourism, to build participation and communication, and to perform organizational learning. The phenomenon of the leadership in the Candirejo ecotourism enriches the studies of the ecotourism management. During this time, the ecotourism management is always associated
with the standard management of national park. The ecotourism management of Candirejo is considered successful even outside the national park management.
Abstract: This study aims at providing empirical evidence on a
comparison of two equity valuation models: (1) the dividend discount
model (DDM) and (2) the residual income model (RIM), in
estimating equity values of Thai firms during 1995-2004. Results
suggest that DDM and RIM underestimate equity values of Thai
firms and that RIM outperforms DDM in predicting cross-sectional
stock prices. Results on regression of cross-sectional stock prices on
the decomposed DDM and RIM equity values indicate that book
value of equity provides the greatest incremental explanatory power,
relative to other components in DDM and RIM terminal values,
suggesting that book value distortions resulting from accounting
procedures and choices are less severe than forecast and
measurement errors in discount rates and growth rates.
We also document that the incremental explanatory power of book
value of equity during 1998-2004, representing the information
environment under Thai Accounting Standards reformed after the
1997 economic crisis to conform to International Accounting
Standards, is significantly greater than that during 1995-1996,
representing the information environment under the pre-reformed
Thai Accounting Standards. This implies that the book value
distortions are less severe under the 1997 Reformed Thai Accounting
Standards than the pre-reformed Thai Accounting Standards.
Abstract: Response surface methodology (RSM) is a very
efficient tool to provide a good practical insight into developing new
process and optimizing them. This methodology could help
engineers to raise a mathematical model to represent the behavior of
system as a convincing function of process parameters.
Through this paper the sequential nature of the RSM surveyed for process
engineers and its relationship to design of experiments (DOE), regression
analysis and robust design reviewed. The proposed four-step procedure in
two different phases could help system analyst to resolve the parameter
design problem involving responses. In order to check accuracy of the
designed model, residual analysis and prediction error sum of squares
(PRESS) described.
It is believed that the proposed procedure in this study can resolve a
complex parameter design problem with one or more responses. It can be
applied to those areas where there are large data sets and a number of
responses are to be optimized simultaneously. In addition, the proposed
procedure is relatively simple and can be implemented easily by using
ready-made standard statistical packages.
Abstract: A new approach for the improvement of coding gain
in channel coding using Advanced Encryption Standard (AES) and
Maximum A Posteriori (MAP) algorithm is proposed. This new
approach uses the avalanche effect of block cipher algorithm AES
and soft output values of MAP decoding algorithm. The performance
of proposed approach is evaluated in the presence of Additive White
Gaussian Noise (AWGN). For the verification of proposed approach,
computer simulation results are included.
Abstract: This paper presents the application of an enhanced
Particle Swarm Optimization (EPSO) combined with Gaussian
Mutation (GM) for solving the Dynamic Economic Dispatch (DED)
problem considering the operating constraints of generators. The
EPSO consists of the standard PSO and a modified heuristic search
approaches. Namely, the ability of the traditional PSO is enhanced
by applying the modified heuristic search approach to prevent the
solutions from violating the constraints. In addition, Gaussian
Mutation is aimed at increasing the diversity of global search, whilst
it also prevents being trapped in suboptimal points during search. To
illustrate its efficiency and effectiveness, the developed EPSO-GM
approach is tested on the 3-unit and 10-unit 24-hour systems
considering valve-point effect. From the experimental results, it can
be concluded that the proposed EPSO-GM provides, the accurate
solution, the efficiency, and the feature of robust computation
compared with other algorithms under consideration.
Abstract: This paper introduces a technique of distortion
estimation in image watermarking using Genetic Programming (GP).
The distortion is estimated by considering the problem of obtaining a
distorted watermarked signal from the original watermarked signal as
a function regression problem. This function regression problem is
solved using GP, where the original watermarked signal is
considered as an independent variable. GP-based distortion
estimation scheme is checked for Gaussian attack and Jpeg
compression attack. We have used Gaussian attacks of different
strengths by changing the standard deviation. JPEG compression
attack is also varied by adding various distortions. Experimental
results demonstrate that the proposed technique is able to detect the
watermark even in the case of strong distortions and is more robust
against attacks.
Abstract: BER analysis of Impulse Radio Ultra Wideband (IRUWB) pulse modulations over S-V channel model is proposed in this paper. The UWB pulse is Gaussian monocycle pulse modulated using Pulse Amplitude Modulation (PAM) and Pulse Position Modulation (PPM). The channel model is generated from a modified S-V model. Bit-error rate (BER) is measured over several of bit rates. The result shows that all modulation are appropriate for both LOS and NLOS channel, but PAM gives better performance in bit rates and SNR. Moreover, as standard of speed has been given for UWB, the communication is appropriate with high bit rates in LOS channel.
Abstract: EPA (Ethernet for Plant Automation) resolves the nondeterministic problem of standard Ethernet and accomplishes real-time communication by means of micro-segment topology and deterministic scheduling mechanism. This paper studies the real-time performance of EPA periodic data transmission from theoretical and experimental perspective. By analyzing information transmission characteristics and EPA deterministic scheduling mechanism, 5 indicators including delivery time, time synchronization accuracy, data-sending time offset accuracy, utilization percentage of configured timeslice and non-RTE bandwidth that can be used to specify the real-time performance of EPA periodic data transmission are presented and investigated. On this basis, the test principles and test methods of the indicators are respectively studied and some formulas for real-time performance of EPA system are derived. Furthermore, an experiment platform is developed to test the indicators of EPA periodic data transmission in a micro-segment. According to the analysis and the experiment, the methods to improve the real-time performance of EPA periodic data transmission including optimizing network structure, studying self-adaptive adjustment method of timeslice and providing data-sending time offset accuracy for configuration are proposed.
Abstract: Autism spectrum disorder is characterized by
abnormalities in social communication, language abilities and
repetitive behaviors. The present study focused on some grammatical
deficits in autistic children. We evaluated the impairment of correct
use of different Persian verb tenses in autistic children-s speech. Two
standardized Language Test were administered then gathered data
were analyzed. The main result of this study was significant
difference between the mean scores of correct responses to present
tense in comparison with past tense in Persian language. This study
demonstrated that tense is severely impaired in autistic children-s
speech. Our findings indicated those autistic children-s production of
simple present/ past tense opposition to be better than production of
future and past periphrastic forms (past perfect, present perfect, past
progressive).
Abstract: According to the masonry standard the compressive
strength is basically dependent on factors such as the mortar strength
and the relative values of unit and mortar strength. However
interlocking brick has none or less use of mortar. Therefore there is a need to investigate the behavior of masonry walls using interlocking
bricks. In this study a series of tests have been conducted; physical
properties and compressive strength of brick units and masonry walls
were constructed from interlocking bricks and tested under constant
vertical load at different eccentricities. The purpose of the
experimental investigations is to obtain the force displacement curves, analyze the behavior of masonry walls. The results showed
that the brick is categorized as common brick (BS 3921:1985) and severe weathering grade (ASTM C62). The maximum compressive stress of interlocking brick wall is 3.6 N/mm2 and fulfilled the requirement of standard for residential building.
Abstract: Background noise is particularly damaging to speech
intelligibility for people with hearing loss especially for sensorineural
loss patients. Several investigations on speech intelligibility have
demonstrated sensorineural loss patients need 5-15 dB higher SNR
than the normal hearing subjects. This paper describes Discrete
Cosine Transform Power Normalized Least Mean Square algorithm
to improve the SNR and to reduce the convergence rate of the LMS
for Sensory neural loss patients. Since it requires only real arithmetic,
it establishes the faster convergence rate as compare to time domain
LMS and also this transformation improves the eigenvalue
distribution of the input autocorrelation matrix of the LMS filter.
The DCT has good ortho-normal, separable, and energy compaction
property. Although the DCT does not separate frequencies, it is a
powerful signal decorrelator. It is a real valued function and thus
can be effectively used in real-time operation. The advantages of
DCT-LMS as compared to standard LMS algorithm are shown via
SNR and eigenvalue ratio computations. . Exploiting the symmetry
of the basis functions, the DCT transform matrix [AN] can be
factored into a series of ±1 butterflies and rotation angles. This
factorization results in one of the fastest DCT implementation. There
are different ways to obtain factorizations. This work uses the fast
factored DCT algorithm developed by Chen and company. The
computer simulations results show superior convergence
characteristics of the proposed algorithm by improving the SNR at
least 10 dB for input SNR less than and equal to 0 dB, faster
convergence speed and better time and frequency characteristics.
Abstract: Stirred tanks have applications in many chemical
processes where mixing is important for the overall performance of
the system. In present work 5%v of the tank is filled by solid particles
with diameter of 700 m that Rushton Turbine and Propeller impeller
is used for stirring. An Eulerian-Eulerian Multi Fluid Model coupled
and for modeling rotating of impeller, moving reference frame
(MRF) technique was used and standard-k- model was selected for
turbulency. Flow field, radial velocity and axial distribution of solid
for both of impellers was investigation and comparison. Comparisons
of simulation results between Rushton Turbine and propeller impeller
shows that final quality of solid-liquid slurry in different rotating
speed for propeller impeller is better than the Rushton Turbine.
Abstract: CT assessment of postoperative spine is challenging in the presence of metal streak artifacts that could deteriorate the
quality of CT images. In this paper, we studied the influence of different acquisition parameters on the magnitude of metal streaking.
A water-bath phantom was constructed with metal insertion similar with postoperative spine assessment. The phantom was scanned with
different acquisition settings and acquired data were reconstructed
using various reconstruction settings. Standardized ROIs were defined within streaking region for image analysis. The result shows
increased kVp and mAs enhanced SNR values by reducing image
noise. Sharper kernel enhanced image quality compared to smooth
kernel, but produced more noise in the images with higher CT fluctuation. The noise between both kernels were significantly
different (P
Abstract: In the visual servoing systems, the data obtained by
Visionary is used for controlling robots. In this project, at first the
simulator which was proposed for simulating the performance of a
6R robot before, was examined in terms of software and test, and in
the proposed simulator, existing defects were obviated. In the first
version of simulation, the robot was directed toward the target object only in a Position-based method using two cameras in the
environment. In the new version of the software, three cameras were used simultaneously. The camera which is installed as eye-inhand on the end-effector of the robot is used for visual servoing in a
Feature-based method. The target object is recognized according to
its characteristics and the robot is directed toward the object in compliance with an algorithm similar to the function of human-s
eyes. Then, the function and accuracy of the operation of the robot are examined through Position-based visual servoing method using
two cameras installed as eye-to-hand in the environment. Finally, the obtained results are tested under ANSI-RIA R15.05-2 standard.
Abstract: In many data mining applications, it is a priori known
that the target function should satisfy certain constraints imposed
by, for example, economic theory or a human-decision maker. In this
paper we consider partially monotone prediction problems, where the
target variable depends monotonically on some of the input variables
but not on all. We propose a novel method to construct prediction
models, where monotone dependences with respect to some of
the input variables are preserved by virtue of construction. Our
method belongs to the class of mixture models. The basic idea is to
convolute monotone neural networks with weight (kernel) functions
to make predictions. By using simulation and real case studies,
we demonstrate the application of our method. To obtain sound
assessment for the performance of our approach, we use standard
neural networks with weight decay and partially monotone linear
models as benchmark methods for comparison. The results show that
our approach outperforms partially monotone linear models in terms
of accuracy. Furthermore, the incorporation of partial monotonicity
constraints not only leads to models that are in accordance with the
decision maker's expertise, but also reduces considerably the model
variance in comparison to standard neural networks with weight
decay.
Abstract: The H.264/AVC standard is a highly efficient video
codec providing high-quality videos at low bit-rates. As employing
advanced techniques, the computational complexity has been
increased. The complexity brings about the major problem in the
implementation of a real-time encoder and decoder. Parallelism is the
one of approaches which can be implemented by multi-core system.
We analyze macroblock-level parallelism which ensures the same bit
rate with high concurrency of processors. In order to reduce the
encoding time, dynamic data partition based on macroblock region is
proposed. The data partition has the advantages in load balancing and
data communication overhead. Using the data partition, the encoder
obtains more than 3.59x speed-up on a four-processor system. This
work can be applied to other multimedia processing applications.