Abstract: An experimental study of anaerobic treatment was performed by hybrid upflow anaerobic sludge blanket (HUASB) reactor to treat produced water (PW) of an onshore crude oil terminal (COD: 1597 mg/L, NH3-N: 14.7 mg/L, phenol: 13.8 mg/L, BOD5: 862 mg/L, sodium: 6240 mg/L and chloride 9530 mg/L). The produced water with high salinity and other toxic substances will inhibit the methanogens performance if there is no adaptation on biomass before anaerobic digestion. COD removal from produced water was investigated at five different dilutions of produced water and tap water (TW) without any nutrient addition and pre-treatment. The dilution ratios were 1PW:4TW, 2PW:3TW, 3PW:2TW, 4PW:1TW and 5PW:0TW. The reactor was evaluated at mesophilic operating condition (35 ± 2 °C) at 5 days of HRT for 250 days continuous feed. The average COD removals for 1PW:4TW, 2PW:3TW, 3PW:2TW, 4PW:1TW and 5PW:0TW were found to be approximately 76.1%, 73.8%, 70.3%, 46.3% and 61.82% respectively, with final average effluent COD of 123.7 mg/L, 240 mg/L, 294 mg/L, 589 mg/L and 738 mg/L, respectively.
Abstract: The charge-pump circuit is an important component in a phase-locked loop (PLL). The charge-pump converts Up and Down signals from the phase/frequency detector (PFD) into current. A conventional CMOS charge-pump circuit consists of two switched current sources that pump charge into or out of the loop filter according to two logical inputs. The mismatch between the charging current and the discharging current causes phase offset and reference spurs in a PLL. We propose a new charge-pump circuit to reduce the current mismatch by using a regulated cascode circuit. The proposed charge-pump circuit is designed and simulated by spectre with TSMC 0.18-μm 1.8-V CMOS technology.
Abstract: The γ-turns play important roles in protein folding and
molecular recognition. The prediction and analysis of γ-turn types are
important for both protein structure predictions and better
understanding the characteristics of different γ-turn types. This study
proposed a physicochemical property-based decision tree (PPDT)
method to interpretably predict γ-turn types. In addition to the good
prediction performance of PPDT, three simple and human
interpretable IF-THEN rules are extracted from the decision tree
constructed by PPDT. The identified informative physicochemical
properties and concise rules provide a simple way for discriminating
and understanding γ-turn types.
Abstract: The amounts of radioactivity in the igneous rocks
have been investigated; samples were collected from the total of eight
basalt rock types in the northeastern of Kurdistan region/Iraq. The
activity concentration of 226Ra (238U) series, 228Ac (232Th) series, 40K
and 137Cs were measured using Planar HPGe and NaI(Tl) detectors.
Along the study area the radium equivalent activities Raeq in Bq/Kg
of samples under investigation were found in the range of 22.16 to
77.31 Bq/Kg with an average value of 44.8 Bq/Kg, this value is much
below the internationally accepted value of 370 Bq/Kg. To estimate
the health effects of this natural radioactive composition, the average
values of absorbed gamma dose rate D (55 nGyh-1), Indoor and
outdoor annual effective dose rates Eied (0.11 mSvy-1) . and Eoed
(0.03 mSvy-1), External hazard index Hex (0.138) and internal hazard
index Hin(0.154), and representative level index Iγr (0.386) have been
calculated and found to be lower than the worldwide average values.
Abstract: Arvia®, a spin-out company of University of Manchester, UK is commercialising a water treatment technology for the removal of low concentrations of organics from water. This technology is based on the adsorption of organics onto graphite based adsorbents coupled with their electrochemical regeneration in a simple electrochemical cell. In this paper, the potential of the process to adsorb microorganisms and electrochemically disinfect them present in water has been demonstrated. Bench scale experiments have indicated that the process of adsorption using graphite adsorbents with electrochemical regeneration can be used for water disinfection effectively. The most likely mechanisms of disinfection of water through this process include direct electrochemical oxidation and electrochemical chlorination.
Abstract: Fake finger submission attack is a major problem in fingerprint recognition systems. In this paper, we introduce an aliveness detection method based on multiple static features, which derived from a single fingerprint image. The static features are comprised of individual pore spacing, residual noise and several first order statistics. Specifically, correlation filter is adopted to address individual pore spacing. The multiple static features are useful to reflect the physiological and statistical characteristics of live and fake fingerprint. The classification can be made by calculating the liveness scores from each feature and fusing the scores through a classifier. In our dataset, we compare nine classifiers and the best classification rate at 85% is attained by using a Reduced Multivariate Polynomial classifier. Our approach is faster and more convenient for aliveness check for field applications.
Abstract: The increasing usage of antibiotics in the animal
farming industry is an emerging worldwide problem contributing to
the development of antibiotic resistance. The purpose of this work was
to investigate the prevalence and antibiotic resistance profile of
bacterial isolates collected from aquatic environments and meats in a
peri-urban community in Daejeon, Korea. In an antibacterial
susceptibility test, the bacterial isolates showed a high incidence of
resistance (~ 26.04 %) to cefazolin, tetracycline, gentamycin,
norfloxacin, erythromycin and vancomycin. The results from a test for
multiple antibiotic resistance indicated that the isolates were
displaying an approximately 5-fold increase in the incidence of
multiple antibiotic resistance to combinations of two different
antibiotics compared to combinations of three or more antibiotics.
Most of the isolates showed multi-antibiotic resistance, and the
resistance patterns were similar among the sampling groups.
Sequencing data analysis of 16S rRNA showed that most of the
resistant isolates appeared to be dominated by the classes
Betaproteobacteria and Gammaproteobacteria in the phylum
Proteobacteria.
Abstract: In order to improve the effect of isolation structure, the
principles and behaviours of the base-isolation system are studied, and
the types and characteristics of the base-isolation are also discussed.
Compared to the traditional aseismatic structures, the base isolation
structures decrease the seismic response obviously: the total structural
aseismatic value decreases to 1/4-1/32 and the seismic shear stress in
the upper structure decreases to 1/14-1/23. In the huge seism, the
structure can have an obvious aseismatic effect.
Abstract: Socioeconomic stability and development of a
country, can be describe by housing affordability. It is aimed to
ensure the housing provided as one of the key factors that is
affordable by every income earner group whether low-income,
middle income and high income group. This research carried out is to
find out affordability of home ownership level for first medium cost
landed-house by the middle-income group in Selangor, Malaysia. It is
also hope that it could be seen as able to contribute to the knowledge
and understanding on housing affordability level for the middleincome
group and variables that influenced the medium income
group-s ability to own first medium-cost houses.
Abstract: In this research the separation efficiency of deoiling hydrocyclone is evaluated using three-dimensional simulation of multiphase flow based on Eulerian-Eulerian finite volume method. The mixture approach of Reynolds Stress Model is also employed to capture the features of turbulent multiphase swirling flow. The obtained separation efficiency of Colman's design is compared with available experimental data and showed that the separation curve of deoiling hydrocyclones can be predicted using numerical simulation.
Abstract: The paper is dealing by testing of ceramic cutting
tools with an interrupted machining. Tests will be provided on fixture
– interrupted cut simulator. This simulator has 4 mouldings on
circumference and cutting edge is put a shocks during 1 revolution.
Criteria of tool wear are destruction of cutting tool or 6000 shocks.
Like testing cutting tool material will be products of Sandvik
Coromant 6190, 620, 650 and 670. Machined materials was be steels
15 128 (13MoCrV6). Cutting speed (408 m.min-1 and 580 m.min-1)
and cutting feed (0,15 mm; 0,2 mm; 0,25 mm and 0,3 mm) were
variable parameters and cutting depth was constant parameter.
Abstract: The network traffic data provided for the design of
intrusion detection always are large with ineffective information and
enclose limited and ambiguous information about users- activities.
We study the problems and propose a two phases approach in our
intrusion detection design. In the first phase, we develop a
correlation-based feature selection algorithm to remove the worthless
information from the original high dimensional database. Next, we
design an intrusion detection method to solve the problems of
uncertainty caused by limited and ambiguous information. In the
experiments, we choose six UCI databases and DARPA KDD99
intrusion detection data set as our evaluation tools. Empirical studies
indicate that our feature selection algorithm is capable of reducing the
size of data set. Our intrusion detection method achieves a better
performance than those of participating intrusion detectors.
Abstract: Nowadays, there is little information, concerning the
heat shield systems, and this information is not completely reliable to
use in so many cases. for example, the precise calculation cannot be
done for various materials. In addition, the real scale test has two
disadvantages: high cost and low flexibility, and for each case we
must perform a new test. Hence, using numerical modeling program
that calculates the surface recession rate and interior temperature
distribution is necessary. Also, numerical solution of governing
equation for non-charring material ablation is presented in order to
anticipate the recession rate and the heat response of non-charring
heat shields. the governing equation is nonlinear and the Newton-
Rafson method along with TDMA algorithm is used to solve this
nonlinear equation system. Using Newton- Rafson method for
solving the governing equation is one of the advantages of the
solving method because this method is simple and it can be easily
generalized to more difficult problems. The obtained results
compared with reliable sources in order to examine the accuracy of
compiling code.
Abstract: ELS is an important ground based hardware in the
loop simulator used for aerodynamics torque loading experiments
of the actuators under test. This work focuses on improvement of the
transient response of torque controller with parameters uncertainty
of Electrical Load Simulator (ELS).The parameters of load simulator
are estimated online and the model is updated, eliminating the model
error and improving the steady state torque tracking response of
torque controller. To improve the Transient control performance the
gain of robust term of SMC is updated online using fuzzy logic
system based on the amount of uncertainty in parameters of load
simulator. The states of load simulator which cannot be measured
directly are estimated using luenberger observer with update of new
estimated parameters. The stability of the control scheme is verified
using Lyapunov theorem. The validity of proposed control scheme is
verified using simulations.
Abstract: According to FDA (Food and Drug Administration of the United States), vinegar is definedas a sour liquid containing at least 4 grams acetic acid in 100 cubic centimeter (4% solution of acetic acid) of solution that is produced from sugary materials by alcoholic fermentation. In the base of microbial starters, vinegars could be contained of more than 50 types of volatile and aromatic substances that responsible for their sweet taste and smelling. Recently the vinegar industry has a great proportion in agriculture, food and microbial biotechnology. The acetic acid bacteria are from the family Acetobacteraceae. Regarding to the latest version of Bergy-s Mannual of Systematic Bacteriology that has categorized bacteria in the base of their 16s RNA differences, the most important acetic acid genera are included Acetobacter (genus I), Gluconacetobacter (genus VIII) and Gluconobacter (genus IX). The genus Acetobacter that is primarily used in vinegar manufacturing plants is a gram negative, obligate aerobe coccus or rod shaped bacterium with the size 0.6 - 0.8 X 1.0 - 4.0 μm, nonmotile or motile with peritrichous flagella and catalase positive – oxidase negative biochemically. Some strains are overoxidizer that could convert acetic acid to carbon dioxide and water.In this research one Acetobacter native strain with high acetic acid productivity was isolated from Iranian white – red cherry. We used two specific culture media include Carr medium [yeast extract, 3%; ethanol, 2% (v/v); bromocresol green, 0.002%; agar, 2% and distilled water, 1000 ml], Frateur medium [yeast extract, 10 g/l; CaCO3, 20 g/l; ethanol, 20 g/l; agar, 20 g/l and distilled water, 1000 ml] and an industrial culture medium. In addition to high acetic acid production and high growth rate, this strain had a good tolerance against ethanol concentration that was examined using modified Carr media with 5%, 7% and 9% ethanol concentrations. While the industrial strains of acetic acid bacteria grow in the thermal range of 28 – 30 °C, this strain was adapted for growth in 34 – 36 °C after 96 hours incubation period. These dramatic characteristics suggest a potential biotechnological strain in production of cherry vinegar with a sweet smell and different nutritional properties in comparison to recent vinegar types. The lack of growth after 24, 48 and 72 hours incubation at 34 – 36 °C and the growth after 96 hours indicates a good and fast thermal flexibility of this strain as a significant characteristic of biotechnological and industrial strains.
Abstract: Fluid flow and heat transfer of vertical full cone
embedded in porous media is studied in this paper. Nonlinear
differential equation arising from similarity solution of inverted cone
(subjected to wall temperature boundary conditions) embedded in
porous medium is solved using a hybrid neural network- particle
swarm optimization method.
To aim this purpose, a trial solution of the differential equation is
defined as sum of two parts. The first part satisfies the initial/
boundary conditions and does contain an adjustable parameter and
the second part which is constructed so as not to affect the
initial/boundary conditions and involves adjustable parameters (the
weights and biases) for a multi-layer perceptron neural network.
Particle swarm optimization (PSO) is applied to find adjustable
parameters of trial solution (in first and second part). The obtained
solution in comparison with the numerical ones represents a
remarkable accuracy.
Abstract: Chest pain is one of the most prevalent complaints
among adults that cause the people to attend to medical centers. The
aim was to determine the prevalence and risk factors of chest pain
among over 30 years old people in Tehran. In this cross-sectional
study, 787 adults took part from Apr 2005 until Apr 2006. The
sampling method was random cluster sampling and there were 25
clusters. In each cluster, interviews were performed with 32 over 30
years old, people lived in those houses. In cases with chest pain, extra
questions asked. The prevalence of CP was 9% (71 cases). Of them
21 cases (6.5%) were in 41-60 year age ranges and the remainders
were over 61 year old. 19 cases (26.8%) mentioned CP in resting
state and all of the cases had exertion onset CP. The CP duration was
10 minutes or less in all of the cases and in most of them (84.5%), the
location of pain mentioned left anterior part of chest, left anterior part
of sternum and or left arm. There was positive history of myocardial
infarction in 12 cases (17%). There was significant relation between
CP and age, sex and between history of myocardial infarction and
marital state of study people. Our results are similar to other studies-
results in most parts, however it is necessary to perform
supplementary tests and follow up studies to differentiate between
cardiac and non-cardiac CP exactly.
Abstract: Thyroid cancer-s overall contribution to the
worldwide cancer burden is relatively small, but incidence rates have increased over the last three decades throughout the world. This trend has been hypothesised to reflect a combination of technological advances enabling increased detection, but also changes in
environmental factors, including population exposure to ionising radiation from fallout, diagnostic tests and treatment for benign and
malignant conditions. The Thyroid dose received apparently shielded
by cerrobend blocks was about 8cGy in 100cGy Expose
Abstract: Medical image data hiding has strict constrains such
as high imperceptibility, high capacity and high robustness.
Achieving these three requirements simultaneously is highly
cumbersome. Some works have been reported in the literature on
data hiding, watermarking and stegnography which are suitable for
telemedicine applications. None is reliable in all aspects. Electronic
Patient Report (EPR) data hiding for telemedicine demand it blind
and reversible. This paper proposes a novel approach to blind
reversible data hiding based on integer wavelet transform.
Experimental results shows that this scheme outperforms the prior
arts in terms of zero BER (Bit Error Rate), higher PSNR (Peak Signal
to Noise Ratio), and large EPR data embedding capacity with
WPSNR (Weighted Peak Signal to Noise Ratio) around 53 dB,
compared with the existing reversible data hiding schemes.
Abstract: This paper is mainly concerned with the application of
a novel technique of data interpretation for classifying measurements
of plasma columns in Tokamak reactors for nuclear fusion
applications. The proposed method exploits several concepts derived
from soft computing theory. In particular, Artificial Neural Networks
and Multi-Class Support Vector Machines have been exploited to
classify magnetic variables useful to determine shape and position of
the plasma with a reduced computational complexity. The proposed
technique is used to analyze simulated databases of plasma equilibria
based on ITER geometry configuration. As well as demonstrating the
successful recovery of scalar equilibrium parameters, we show that
the technique can yield practical advantages compared with earlier
methods.