Abstract: This work aims to test the application of computational fluid dynamics (CFD) modeling to fixed bed catalytic cracking reactors. Studies of CFD with a fixed bed design commonly use a regular packing with N=2 to define bed geometry. CFD allows us to obtain a more accurate view of the fluid flow and heat transfer mechanisms present in fixed bed equipment. Naphtha was used as feedstock and the reactor length was 80cm. It is divided in three sections that catalyst bed packed in the middle section of the reactor. The reaction scheme was involved one primary reaction and 24 secondary reactions. Because of high CPU times in these simulations, parallel processing have been used. In this study the coke formation process in fixed bed and empty tube reactor was simulated and coke in these reactors are compared. In addition, the effect of steam ratio and feed flow rate on coke formation was investigated.
Abstract: Distributed Computing Systems are usually considered the most suitable model for practical solutions of many parallel algorithms. In this paper an enhanced distributed system is presented to improve the time complexity of Binary Indexed Trees (BIT). The proposed system uses multi-uniform processors with identical architectures and a specially designed distributed memory system. The analysis of this system has shown that it has reduced the time complexity of the read query to O(Log(Log(N))), and the update query to constant complexity, while the naive solution has a time complexity of O(Log(N)) for both queries. The system was implemented and simulated using VHDL and Verilog Hardware Description Languages, with xilinx ISE 10.1, as the development environment and ModelSim 6.1c, similarly as the simulation tool. The simulation has shown that the overhead resulting by the wiring and communication between the system fragments could be fairly neglected, which makes it applicable to practically reach the maximum speed up offered by the proposed model.
Abstract: The purpose of this research was to design costume by the inspiration from the configurations, colors and decorations of Thai Royal Barges. The researcher investigated the bibliographies and the important of the Thai Royal Water-Course Procession, configurations and decoration techniques of four Royal Barges history. Furthermore, the researcher combined the contemporary architecture which became part of the four costumes with four patterns in this research. The four costumes designed by applied the physical configuration of the Royal Barge with the fold techniques which create the geometry pattern that are part of the Royal Barge-s decoration and contemporary architecture. Therefore, the researcher united each identity color of the barges with each costume composed with the original patterns by adjusted new layout and resized. Lastly, the new attractive patterns appeared. Nevertheless, the beauty of Thai traditional still remain by using Thai painting figure with black and white color which are the prevalent colors for the contemporary architectures.
Abstract: The enthusiasm for gluten avoidance in a growing
market is met by improvements in sensitive detection methods for
analysing gluten content. Paradoxically, manufacturers employ no
such systems in the production process but continue to market their
product as gluten free, a significant risk posed to an undetermined
coeliac population. This paper resonates with an immunological
response that causes gastrointestinal scarring and villous atrophy with
the conventional description of personal injury. This thesis divulges
into evaluating potential inadequacies of gluten labelling laws which
not only present a diagnostic challenge for general practitioners in the
UK but it also exposes a less than adequate form of available legal
protection to those who suffer adverse reactions as a result of gluten
digestion. Central to this discussion is whether a claim brought in
misrepresentation, negligence and/or under the Consumer Protection
Act 1987 could be sustained. An interesting comparison is then made
with the legal regimes of neighboring jurisdictions furthering the
theme of a legally un-catered for gluten kingdom.
Abstract: There have been significant improvements in automatic
voice recognition technology. However, existing systems still face difficulties,
particularly when used by non-native speakers with accents.
In this paper we address a problem of identifying the English accented
speech of speakers from different backgrounds. Once an accent is
identified the speech recognition software can utilise training set from
appropriate accent and therefore improve the efficiency and accuracy
of the speech recognition system. We introduced the Q factor, which
is defined by the sum of relationships between frequencies of the
formants. Four different accents were considered and experimented
for this research. A scoring method was introduced in order to
effectively analyse accents. The proposed concept indicates that the
accent could be identified by analysing their formants.
Abstract: Residual dye contents in textile dyeing wastewater have complex aromatic structures that are resistant to degrade in biological wastewater treatment. The objectives of this study were to determine the effectiveness of nanoscale zerovalent iron (NZVI) to decolorize Reactive Black 5 (RB5) and Reactive Red 198 (RR198) in synthesized wastewater and to investigate the effects of the iron particle size, iron dosage and solution pHs on the destruction of RB5 and RR198. Synthesized NZVI was confirmed by transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The removal kinetic rates (kobs) of RB5 (0.0109 min-1) and RR198 (0.0111 min-1) by 0.5% NZVI were many times higher than those of microscale zerovalent iron (ZVI) (0.0007 min-1 and 0.0008 min-1, respectively). The iron dosage increment exponentially increased the removal efficiencies of both RB5 and RR198. Additionally, lowering pH from 9 to 5 increased the decolorization kinetic rates of both RB5 and RR198 by NZVI. The destruction of azo bond (N=N) in the chromophore of both reactive dyes led to decolorization of dye solutions.
Abstract: Control of complex systems is one of important files in complex systems, that not only relies on the essence of complex systems which is denoted by the core concept – emergence, but also embodies the elementary concept in control theory. Aiming at giving a clear and self-contained description of emergence, the paper introduces a formal way to completely describe the formation and dynamics of emergence in complex systems. Consequently, this paper indicates the Emergence-Oriented Control methodology that contains three kinds of basic control schemes: the direct control, the system re-structuring and the system calibration. As a universal ontology, the Emergence-Oriented Control provides a powerful tool for identifying and resolving control problems in specific systems.
Abstract: In this paper, a post processing scheme is suggested
for improvement of Bit Error-Rate (BER) in optical fiber
transmission receivers. The developed scheme has been tested on
optical fiber systems operating with a non-return-to-zero (NRZ)
format at transmission rates of up to 10Gbps. The transmission
system considered is based on well known transmitters and receivers
blocks operating at wavelengths in the region of 1550 nm using a
standard single mode fiber. Performance of improved detected
signals has been evaluated via the analysis of quality factor and
computed bit error rates. Numerical simulations have shown a
noticeable improvement of the system BER after implementation of
the suggested post processing operation on the detected electrical
signals.
Abstract: Character segmentation is an important preprocessing
step for text recognition. In degraded documents, existence of
touching characters decreases recognition rate drastically, for any
optical character recognition (OCR) system. In this paper we have
proposed a complete solution for segmenting touching characters in
all the three zones of printed Gurmukhi script. A study of touching
Gurmukhi characters is carried out and these characters have been
divided into various categories after a careful analysis. Structural
properties of the Gurmukhi characters are used for defining the
categories. New algorithms have been proposed to segment the
touching characters in middle zone, upper zone and lower zone.
These algorithms have shown a reasonable improvement in
segmenting the touching characters in degraded printed Gurmukhi
script. The algorithms proposed in this paper are applicable only to
machine printed text. We have also discussed a new and useful
technique to segment the horizontally overlapping lines.
Abstract: A comprehensive program of laboratory testing on a
compacted kaolin in a modified triaxial cell was perform to
investigate the influence of hydraulic hysteresis on effective stress in
unsaturated soils. The test data are presented on a range of constant
suction shear tests along wetting and drying paths. The values of
effective stress parameter χ at different matric suction were
determined using the test results. The effect of hydraulic hysteresis
phenomenon on the effective stress was observed. The values of
effective stress parameter χ obtained from the experiments were
compared with those obtained from the expressions proposed in
literature.
Abstract: This paper describes a finite-difference time-domainFDTD) method to analyze lightning surge propagation in electric transmission lines. Numerical computation of solving the Telegraphist-s equations is determined and investigated its effectiveness. A source of lightning surge wave on power transmission lines is modeled by using Heidler-s surge model. The
proposed method was tested against medium-voltage power
transmission lines in comparison with the solution obtained by using
lattice diagram. As a result, the calculation showed that the method is one of accurate methods to analyze transient
lightning wave in power transmission lines.
Abstract: The paper provides biomasses characteristics by
proximate analysis (volatile matter, fixed carbon and ash) and
ultimate analysis (carbon, hydrogen, nitrogen and oxygen) for the
prediction of the heating value equations. The heating value
estimation of various biomasses can be used as an energy evaluation.
Thirteen types of biomass were studied. Proximate analysis was
investigated by mass loss method and infrared moisture analyzer.
Ultimate analysis was analyzed by CHNO analyzer. The heating
values varied from 15 to 22.4MJ kg-1. Correlations of the calculated
heating value with proximate and ultimate analyses were undertaken
using multiple regression analysis and summarized into three and two
equations, respectively. Correlations based on proximate analysis
illustrated that deviation of calculated heating values from
experimental heating values was higher than the correlations based
on ultimate analysis.
Abstract: In this paper, we discuss convergence of the extrapolated iterative methods for linear systems with the coefficient matrices are singular H-matrices. And we present the sufficient and necessary conditions for convergence of the extrapolated iterative methods. Moreover, we apply the results to the GMAOR methods. Finally, we give one numerical example.
Abstract: The emergence of person-centred discourse based
around notions of 'personal development planning- and 'work'life
balance' has taken hold in education and the workplace in recent
years. This paper examines this discourse with regard to recent
developments in higher education as well as the inter-related issue of
work-life balance in occupational careers. In both cases there have
been national and trans-national policy initiatives directed towards
improving both personal opportunities and competitive advantage in
a global knowledge-based economy. However, despite an increasing
concern with looking outward at this globalised educational and
employment marketplace, there is something of a paradox in
encouraging people to look inward at themselves in order to become
more self-determined. This apparent paradox is considered from a
discourse analytic perspective in terms of the ideological effects of an
increasing concern with the personal world. Specifically, it is argued
that there are tensions that emerge from a concern with an innerdirected
process of self-reflection that dissolve any engagement with
wider political issues that impact upon educational and career
development.
Abstract: The aim of this paper is to investigate the effect of
mean size of industry on survival of new firms in East-Azarbaijan
province through 1981-2006 using hazard function. So the effect of
two variables including mean employment of industry and mean
capital of industry are investigated on firm's survival. The Industry &
Mine Ministry database has used for data gathering and the data are
analyzed using the semi-parametric cox regression model. The results
of this study shows that there is a meaningful negative relationship
between mean capital of industry and firm's survival, but the mean
employment of industry has no meaningful effect on survival of new
firms.
Abstract: Due to important issues, such as deadlock, starvation,
communication, non-deterministic behavior and synchronization,
concurrent systems are very complex, sensitive, and error-prone.
Thus ensuring reliability and accuracy of these systems is very
essential. Therefore, there has been a big interest in the formal
specification of concurrent programs in recent years. Nevertheless,
some features of concurrent systems, such as dynamic process
creation, scheduling and starvation have not been specified formally
yet. Also, some other features have been specified partially and/or
have been described using a combination of several different
formalisms and methods whose integration needs too much effort. In
other words, a comprehensive and integrated specification that could
cover all aspects of concurrent systems has not been provided yet.
Thus, this paper makes two major contributions: firstly, it provides a
comprehensive formal framework to specify all well-known features
of concurrent systems. Secondly, it provides an integrated
specification of these features by using just a single formal notation,
i.e., the Z language.
Abstract: The present paper deals with the experimental and
computational study of axial collapse of the aluminum metallic shells
having combined tube-frusta geometry between two parallel plates.
Shells were having bottom two third lengths as frusta and remaining
top one third lengths as tube. Shells were compressed to recognize
their modes of collapse and associated energy absorption capability.
An axisymmetric Finite Element computational model of collapse
process is presented and analysed, using a non-linear FE code
FORGE2. Six noded isoparametric triangular elements were used to
discretize the deforming shell. The material of the shells was
idealized as rigid visco-plastic. To validate the computational model
experimental and computed results of the deformed shapes and their
corresponding load-compression and energy-compression curves
were compared. With the help of the obtained results progress of the
axisymmetric mode of collapse has been presented, analysed and
discussed.
Abstract: Text categorization is the problem of classifying text
documents into a set of predefined classes. After a preprocessing
step, the documents are typically represented as large sparse vectors.
When training classifiers on large collections of documents, both the
time and memory restrictions can be quite prohibitive. This justifies
the application of feature selection methods to reduce the
dimensionality of the document-representation vector. In this paper,
three feature selection methods are evaluated: Random Selection,
Information Gain (IG) and Support Vector Machine feature selection
(called SVM_FS). We show that the best results were obtained with
SVM_FS method for a relatively small dimension of the feature
vector. Also we present a novel method to better correlate SVM
kernel-s parameters (Polynomial or Gaussian kernel).
Abstract: The present study aimed to investigate whether
chlorophyll meter readings (SPAD) can be used as criterion of singleplant
selection in maize breeding. Experimentation was performed at
the ultra-low density of 0.74 plants/m2 in order the potential yield per
plant to be fully expressed. R-31 honeycomb experiments were
conducted in three different areas in Greece (Thessaloniki, Giannitsa
and Florina) using 30 inbred lines at well-watered and water-stressed
conditions during the 2012 growing season. The chlorophyll meter
readings had higher rates at dry conditions, except location of
Giannitsa where differences were not significant. Genotypes of
highest chlorophyll meter readings were consistent across areas,
emphasizing on the character’s stability. A positive correlation
between the chlorophyll meter readings and grain yield was
strengthening over time and culminated at the physiological maturity
stage. There was a clear sign that the chlorophyll meter readings has
the potential to be used for the selection of stress-adaptive genotypes
and may permit modern maize to be grown at wider range of
environments addressing the climate change scenarios.
Abstract: Power system stability enhancement by simultaneous tuning of a Power System Stabilizer (PSS) and a Static Var Compensator (SVC)-based controller is thoroughly investigated in this paper. The coordination among the proposed damping stabilizers and the SVC internal voltage regulators has also been taken into consideration. The design problem is formulated as an optimization problem with a time-domain simulation-based objective function and Real-Coded Genetic Algorithm (RCGA) is employed to search for optimal controller parameters. The proposed stabilizers are tested on a weakly connected power system with different disturbances and loading conditions. The nonlinear simulation results are presented to show the effectiveness and robustness of the proposed control schemes over a wide range of loading conditions and disturbances. Further, the proposed design approach is found to be robust and improves stability effectively even under small disturbance and unbalanced fault conditions.