Abstract: Expression data analysis is based mostly on the
statistical approaches that are indispensable for the study of
biological systems. Large amounts of multidimensional data resulting
from the high-throughput technologies are not completely served by
biostatistical techniques and are usually complemented with visual,
knowledge discovery and other computational tools. In many cases,
in biological systems we only speculate on the processes that are
causing the changes, and it is the visual explorative analysis of data
during which a hypothesis is formed. We would like to show the
usability of multidimensional visualization tools and promote their
use in life sciences. We survey and show some of the
multidimensional visualization tools in the process of data
exploration, such as parallel coordinates and radviz and we extend
them by combining them with the self-organizing map algorithm. We
use a time course data set of transitional cell carcinoma of the bladder
in our examples. Analysis of data with these tools has the potential to
uncover additional relationships and non-trivial structures.
Abstract: In mechanical and environmental engineering, mixed
convection is a frequently encountered thermal fluid phenomenon
which exists in atmospheric environment, urban canopy flows, ocean
currents, gas turbines, heat exchangers, and computer chip cooling
systems etc... . This paper deals with a numerical investigation of
mixed convection in a vertical heated channel. This flow results from
the mixing of the up-going fluid along walls of the channel with the
one issued from a flat nozzle located in its entry section. The fluiddynamic
and heat-transfer characteristics of vented vertical channels
are investigated for constant heat-flux boundary conditions, a
Rayleigh number equal to 2.57 1010, for two jet Reynolds number
Re=3 103 and 2104 and the aspect ratio in the 8-20 range. The system
of governing equations is solved with a finite volumes method and an
implicit scheme. The obtained results show that the turbulence and
the jet-wall interaction activate the heat transfer, as does the drive of
ambient air by the jet. For low Reynolds number Re=3 103, the
increase of the aspect Ratio enhances the heat transfer of about 3%,
however; for Re=2 104, the heat transfer enhancement is of about
12%. The numerical velocity, pressure and temperature fields are
post-processed to compute the quantities of engineering interest such
as the induced mass flow rate, and average Nusselt number, in terms
of Rayleigh, Reynolds numbers and dimensionless geometric
parameters are presented.
Abstract: Biometric measures of one kind or another have been
used to identify people since ancient times, with handwritten
signatures, facial features, and fingerprints being the traditional
methods. Of late, Systems have been built that automate the task of
recognition, using these methods and newer ones, such as hand
geometry, voiceprints and iris patterns. These systems have different
strengths and weaknesses. This work is a two-section composition. In
the starting section, we present an analytical and comparative study
of common biometric techniques. The performance of each of them
has been viewed and then tabularized as a result. The latter section
involves the actual implementation of the techniques under
consideration that has been done using a state of the art tool called,
MATLAB. This tool aids to effectively portray the corresponding
results and effects.
Abstract: This study explored the relationship between
occupational stress and the perceived effectiveness of men and
women managers in Ghanaian organizations. The exploration is
underlined by attempt to understand the degree to which male and
female managers in Ghanaian organizations experience occupational
stress at the workplace. The purpose is to examine the sources and
extents of occupational stress experienced by male and female
managers in Ghana. Data was collected using questionnaires and
analyzed using both descriptive statistics and correlation analysis.
The results showed that female managers in Ghana are more likely to
report of more stress experiences in the workplace than their male
counterparts. The female managers are more likely to perceive role
conflict and alienation as job stressors while the male managers
perceived blocked career as a major source of workplace stress. It is
concluded that despite the female managers experiencing enormous
level of occupational stress, there was no significant differences
between their managerial effectiveness and that of the male.
Abstract: Natural organic matter (NOM) is heterogeneous
mixture of organic compounds that enter the water media from
animal and plant remains, domestic and industrial wastes.
Researches showed that NOM is likely precursor material for
disinfection by products (DBPs). Chlorine very commenly used for
disinfection purposes and NOM and chlorine reacts then
Trihalomethane (THM) and Haloacetic acids (HAAs) which are
cancerogenics for human health are produced. The aim of the study is
to search NOM removal by enhanced coagulation from drinking
water source of Eskisehir which is supplied from Porsuk Dam.
Recently, Porsuk dam water is getting highly polluted and therefore
NOM concentration is increasing. Enhanced coagulation studies were
evaluated by measurement of Dissolved Organic Carbon (DOC), UV
absorbance at 254 nm (UV254), and different trihalomethane
formation potential (THMFP) tests. Results of jar test experiments
showed that NOM can be removed from water about 40-50 % of
efficiency by enhanced coagulation. Optimum coagulant type and
coagulant dosages were determined using FeCl3 and Alum.
Abstract: There are many sources trough which the soil get
enriched and contaminated with REEs. The determination of REEs in
environmental samples has been limited because of the lack of
sensitive analytical techniques. Soil samples were collected from
four sites including open cast coal mine, natural coal burning, coal
washery and control in the coal field located in Dhanbad, India.
Total concentrations of rare earth elements (REEs) were determined
using the inductively coupled plasma atomic absorption spectrometry
in order to assess enrichment status in the coal field. Results showed
that the mean concentrations of La, Pr, Eu, Tb, Ho, and Tm in open
cast mine and natural coal burning sites were elevated compared to
the reference concentrations, while Ce, Nd, Sm, and Gd were
elevated in coal washery site. When compared to reference soil,
heavy REEs (HREEs) were enriched in open cast mines and natural
coal burning affected soils, however, the HREEs were depleted in the
coal washery sites. But, the Chondrite-normalization diagram showed
significant enrichment for light REEs (LREEs) in all the soils. High
concentration of Pr, Eu, Tb, Ho, Tm, and Lu in coal mining and coal
burning sites may pose human health risks. Factor analysis showed
that distribution and relative abundance of REEs of the coal washery
site is comparable with the control. Eventually washing or cleaning
of coal could significantly decrease the emission of REEs from coal
into the environment.
Abstract: In this paper the strength of adhesive joint under
tension and bending is discussed on the basis of intensity of
singular stress by the application of FEM. A useful method is
presented with focusing on the stress at the edge of interface
between the adhesive and adherent obtained by FEM. After
analyzing the adhesive joint strength with all material
combinations, it is found that to improve the interface strength,
thin adhesive layers are desirable because the intensity of
singular stress decreases with decreasing the thickness.
Abstract: The steady-state temperature for one-dimensional transpiration cooling system has been conducted experimentally and numerically to investigate the heat transfer characteristics of combined convection and radiation. The Nickel –Chrome (Ni-Cr) open-cellular porous material having porosity of 0.93 and pores per inch (PPI) of 21.5 was examined. The upper surface of porous plate was heated by the heat flux of incoming radiation varying from 7.7 - 16.6 kW/m2 whereas air injection velocity fed into the lower surface was varied from 0.36 - 1.27 m/s, and was then rearranged as Reynolds number (Re). For the report of the results in the present study, two efficiencies including of temperature and conversion efficiency were presented. Temperature efficiency indicating how close the mean temperature of a porous heat plate to that of inlet air, and increased rapidly with the air injection velocity (Re). It was then saturated and had a constant value at Re higher than 10. The conversion efficiency, which was regarded as the ability of porous material in transferring energy by convection after absorbed from heat radiation, decreased with increasing of the heat flux and air injection velocity. In addition, it was then asymptotic to a constant value at the Re higher than 10. The numerical predictions also agreed with experimental data very well.
Abstract: A camera in the building site is exposed to different
weather conditions. Differences between images of the same scene
captured with the same camera arise also due to temperature variations.
The influence of temperature changes on camera parameters
were modelled and integrated into existing analytical camera model.
Modified camera model enables quantitatively assessing the influence
of temperature variations.
Abstract: The ability of information systems to operate in conjunction with each other encompassing communication protocols, hardware, software, application, and data compatibility layers. There has been considerable work in industry on the development of component interoperability models, such as CORBA, (D)COM and JavaBeans. These models are intended to reduce the complexity of software development and to facilitate reuse of off-the-shelf components. The focus of these models is syntactic interface specification, component packaging, inter-component communications, and bindings to a runtime environment. What these models lack is a consideration of architectural concerns – specifying systems of communicating components, explicitly representing loci of component interaction, and exploiting architectural styles that provide well-understood global design solutions. The development of complex business applications is now focused on an assembly of components available on a local area network or on the net. These components must be localized and identified in terms of available services and communication protocol before any request. The first part of the article introduces the base concepts of components and middleware while the following sections describe the different up-todate models of communication and interaction and the last section shows how different models can communicate among themselves.
Abstract: The purpose of this study is to investigate the effects
of modality principles in instructional software among first grade
pupils- achievements in the learning of Arabic Language. Two modes
of instructional software were systematically designed and
developed, audio with images (AI), and text with images (TI). The
quasi-experimental design was used in the study. The sample
consisted of 123 male and female pupils from IRBED Education
Directorate, Jordan. The pupils were randomly assigned to any one of
the two modes. The independent variable comprised the two modes
of the instructional software, the students- achievement levels in the
Arabic Language class and gender. The dependent variable was the
achievements of the pupils in the Arabic Language test. The
theoretical framework of this study was based on Mayer-s Cognitive
Theory of Multimedia Learning. Four hypotheses were postulated
and tested. Analyses of Variance (ANOVA) showed that pupils using
the (AI) mode performed significantly better than those using (TI)
mode. This study concluded that the audio with images mode was an
important aid to learning as compared to text with images mode.
Abstract: This article considers the positional buckling of
composite thick plates under thermal loading . For this purpose , the
complex finite strip method is used . In analysis of complex finite
strip, harmonic complex function in longitudinal direction , cubic
functions in transversal direction and parabola distribution of
transverse shear strain in thickness of thick plate based on higherorder
shear deformation theory are used . In given examples , the
effect of angles of stratification , number of layers , dimensions ratio
and length – to – thick ratio across critical temperature are
considered.
Abstract: In this experimental investigation shake table tests
were conducted on two reduced models that represent normal single
room building constructed by Compressed Stabilized Earth Block
(CSEB) from locally available soil. One model was constructed with
earthquake resisting features (EQRF) having sill band, lintel band and
vertical bands to control the building vibration and another one was
without Earthquake Resisting Features. To examine the seismic
capacity of the models particularly when it is subjected to long-period
ground motion by large amplitude by many cycles of repeated
loading, the test specimen was shaken repeatedly until the failure.
The test results from Hi-end Data Acquisition system show that
model with EQRF behave better than without EQRF. This modified
masonry model with new material combined with new bands is used
to improve the behavior of masonry building.
Abstract: This paper focuses on Land Use and Land Cover Changes (LULCC) occurred in the urban coastal regions of the Mediterranean basin in the last thirty years. LULCC were assessed diachronically (1975-2006) in two urban areas, Rome (Italy) and Athens (Greece), by using CORINE land cover maps. In strictly coastal territories a persistent growth of built-up areas at the expenses of both agricultural and forest land uses was found. On the contrary, a different pattern was observed in the surrounding inland areas, where a high conversion rate of the agricultural land uses to both urban and forest land uses was recorded. The impact of city growth on the complex pattern of coastal LULCC is finally discussed.
Abstract: This paper presents anti-synchronization of chaos
between two different chaotic systems using active control method.
The proposed technique is applied to achieve chaos antisynchronization
for the Lü and Rössler dynamical systems.
Numerical simulations are implemented to verify the results.
Abstract: In this paper, we present the information life cycle, and analyze the importance of managing the corporate application portfolio across this life cycle. The approach presented here does not correspond just to the extension of the traditional information system development life cycle. This approach is based in the generic life cycle employed in other contexts like manufacturing or marketing. In this paper it is proposed a model of an information system life cycle, supported in the assumption that a system has a limited life. But, this limited life may be extended. This model is also applied in several cases; being reported here two examples of the framework application in a construction enterprise, and in a manufacturing enterprise.
Abstract: This paper presents an exact solution and a finite element method (FEM) for a Piezoceramic Rod under static load. The cylindrical rod is made from polarized ceramics (piezoceramics) with axial poling. The lateral surface of the rod is traction-free and is unelectroded. The two end faces are under a uniform normal traction. Electrically, the two end faces are electroded with a circuit between the electrodes, which can be switched on or off. Two cases of open and shorted electrodes (short circuit and open circuit) will be considered. Finally, a finite element model will be used to compare the results with an exact solution. The study uses ABAQUS (v.6.7) software to derive the finite element model of the ceramic rod.
Abstract: The purpose of present paper was to investigate
perceptions of Korean secondary school students about social issues
related to biological sciences. Twenty issues were selected based on
topics of articles in the newspaper from 2005 to 2010. The issues were
categorized into biotechnology, health-disease and environment
domains. Subjects were 541 high school students (male 253 and
female 288). On the survey, students were asked to answer on 5-point
Lickert scales how they thought of the effect of biological phenomena
or events related to biological issues on the individual life and the
society. They perceived that the biological issues would be more
effectible on the society than on the individual life. Female students
had a little more perceptions than males.
Abstract: In recent years image watermarking has become an
important research area in data security, confidentiality and image
integrity. Many watermarking techniques were proposed for medical
images. However, medical images, unlike most of images, require
extreme care when embedding additional data within them because
the additional information must not affect the image quality and
readability. Also the medical records, electronic or not, are linked to
the medical secrecy, for that reason, the records must be confidential.
To fulfill those requirements, this paper presents a lossless
watermarking scheme for DICOM images. The proposed a fragile
scheme combines two reversible techniques based on difference
expansion for patient's data hiding and protecting the region of
interest (ROI) with tamper detection and recovery capability.
Patient's data are embedded into ROI, while recovery data are
embedded into region of non-interest (RONI). The experimental
results show that the original image can be exactly extracted from the
watermarked one in case of no tampering. In case of tampered ROI,
tampered area can be localized and recovered with a high quality
version of the original area.
Abstract: This work is devoted to the calculation of the
undulatory parameters and the study of the influence thickness of
electrical sheet on overvoltage compared to the carcass and between
whorls (sections) of the asynchronous motors supplied with PWM
converters.