Abstract: As a result of urbanization, the unpredictable growth of industry and transport, production of chemicals, military activities, etc. the concentration of anthropogenic toxicants spread in nature exceeds all the permissible standards. Most dangerous among these contaminants are organic compounds having great persistence, bioaccumulation, and toxicity along with our awareness of their prominent occurrence in the environment and food chain. Among natural ecological tools, plants still occupying above 40% of the world land, until recently, were considered as organisms having only a limited ecological potential, accumulating in plant biomass and partially volatilizing contaminants of different structure. However, analysis of experimental data of the last two decades revealed the essential role of plants in environment remediation due to ability to carry out intracellular degradation processes leading to partial or complete decomposition of carbon skeleton of different structure contaminants. Though, phytoremediation technologies still are in research and development, their various applications have been successfully used. The paper aims to analyze mechanisms of organic contaminants uptake and detoxification in plants, being the less studied issue in evaluation and exploration of plants potential for environment remediation.
Abstract: Fly ash is a significant waste that is released of
thermal power plants and defined as very fine particles that are drifted upward with up taken by the flue gases due to the burning of
used coal [1]. The fly-ash is capable of removing organic
contaminants in consequence of high carbon content, a large surface area per unit volume and contained heavy metals. Therefore, fly ash
is used as an effective coagulant and adsorbent by pelletization [2, 3].
In this study, the possibility of use of fly ash taken from Turkey like low-cost adsorbent for adsorption of zinc ions found in waste
water was investigated. The fly ash taken from Turkey was pelletized with bentonite and molass to evaluate the adsorption capaticity. For
this purpose; analyses such as sieve analysis, XRD, XRF, FTIR and SEM were performed. As a result, it was seen that pellets prepared
from fly ash, bentonite and molass would be used for zinc adsorption.
Abstract: Choosing the right metadata is a critical, as good
information (metadata) attached to an image will facilitate its
visibility from a pile of other images. The image-s value is enhanced
not only by the quality of attached metadata but also by the technique
of the search. This study proposes a technique that is simple but
efficient to predict a single human image from a website using the
basic image data and the embedded metadata of the image-s content
appearing on web pages. The result is very encouraging with the
prediction accuracy of 95%. This technique may become a great
assist to librarians, researchers and many others for automatically and
efficiently identifying a set of human images out of a greater set of
images.
Abstract: In-core memory requirement is a bottleneck in solving
large three dimensional Navier-Stokes finite element problem
formulations using sparse direct solvers. Out-of-core solution
strategy is a viable alternative to reduce the in-core memory
requirements while solving large scale problems. This study
evaluates the performance of various out-of-core sequential solvers
based on multifrontal or supernodal techniques in the context of
finite element formulations for three dimensional problems on a
Windows platform. Here three different solvers, HSL_MA78,
MUMPS and PARDISO are compared. The performance of these
solvers is evaluated on a 64-bit machine with 16GB RAM for finite
element formulation of flow through a rectangular channel. It is
observed that using out-of-core PARDISO solver, relatively large
problems can be solved. The implementation of Newton and
modified Newton's iteration is also discussed.
Abstract: The research objective of the project and article
“European Ecological Network Natura 2000 – opportunities and
threats” Natura 2000 sites constitute a form of environmental
protection, several legal problems are likely to result. Most
controversially, certain sites will be subject to two regimes of
protection: as national parks and as Natura 2000 sites. This dualism
of the legal regulation makes it difficult to perform certain legal
obligations related to the regimes envisaged under each form of
environmental protection. Which regime and which obligations
resulting from the particular form of environmental protection have
priority and should prevail? What should be done if these obligations
are contradictory? Furthermore, an institutional problem consists in
that no public administration authority has the power to resolve legal
conflicts concerning the application of a particular regime on a given
site. There are also no criteria to decide priority and superiority of
one form of environmental protection over the other. Which
regulations are more important, those that pertain to national parks or
to Natura 2000 sites? In the light of the current regulations, it is
impossible to give a decisive answer to these questions. The internal
hierarchy of forms of environmental protection has not been
determined, and all such forms should be treated equally.
Abstract: The dynamics of User Datagram Protocol (UDP) traffic
over Ethernet between two computers are analyzed using nonlinear
dynamics which shows that there are two clear regimes in the data
flow: free flow and saturated. The two most important variables
affecting this are the packet size and packet flow rate. However,
this transition is due to a transcritical bifurcation rather than phase
transition in models such as in vehicle traffic or theorized large-scale
computer network congestion. It is hoped this model will help lay
the groundwork for further research on the dynamics of networks,
especially computer networks.
Abstract: This study applied Theory of Planned Behaviour
(TPB) to explain the knowledge sharing behaviour among academic
staff at a Public Higher Education Institution (HEI) in Malaysia. The
main objectives of this study are; to identify the components that
influence knowledge sharing behaviour and to determine the levels of
knowledge sharing behaviour among academic staff. A total of 200
respondents were participated in answering questionnaires. The
findings of this study revealed that level of perceiving and
implementing knowledge sharing behaviour among academic staff at
a Public HEI in Malaysia exist but not openly or strongly practiced.
The findings were discussed and recommendations for the future
research were also addressed.
Abstract: High speed networks provide realtime variable bit rate
service with diversified traffic flow characteristics and quality
requirements. The variable bit rate traffic has stringent delay and
packet loss requirements. The burstiness of the correlated traffic
makes dynamic buffer management highly desirable to satisfy the
Quality of Service (QoS) requirements. This paper presents an
algorithm for optimization of adaptive buffer allocation scheme for
traffic based on loss of consecutive packets in data-stream and buffer
occupancy level. Buffer is designed to allow the input traffic to be
partitioned into different priority classes and based on the input
traffic behavior it controls the threshold dynamically. This algorithm
allows input packets to enter into buffer if its occupancy level is less
than the threshold value for priority of that packet. The threshold is
dynamically varied in runtime based on packet loss behavior. The
simulation is run for two priority classes of the input traffic –
realtime and non-realtime classes. The simulation results show that
Adaptive Partial Buffer Sharing (ADPBS) has better performance
than Static Partial Buffer Sharing (SPBS) and First In First Out
(FIFO) queue under the same traffic conditions.
Abstract: In this paper, we propose a Perceptually Optimized Foveation based Embedded ZeroTree Image Coder (POEFIC) that introduces a perceptual weighting to wavelet coefficients prior to control SPIHT encoding algorithm in order to reach a targeted bit rate with a perceptual quality improvement with respect to a given bit rate a fixation point which determines the region of interest ROI. The paper also, introduces a new objective quality metric based on a Psychovisual model that integrates the properties of the HVS that plays an important role in our POEFIC quality assessment. Our POEFIC coder is based on a vision model that incorporates various masking effects of human visual system HVS perception. Thus, our coder weights the wavelet coefficients based on that model and attempts to increase the perceptual quality for a given bit rate and observation distance. The perceptual weights for all wavelet subbands are computed based on 1) foveation masking to remove or reduce considerable high frequencies from peripheral regions 2) luminance and Contrast masking, 3) the contrast sensitivity function CSF to achieve the perceptual decomposition weighting. The new perceptually optimized codec has the same complexity as the original SPIHT techniques. However, the experiments results show that our coder demonstrates very good performance in terms of quality measurement.
Abstract: The increased number of automobiles in recent years
has resulted in great demand for fossil fuel. This has led to the
development of automobile by using alternative fuels which include
gaseous fuels, biofuels and vegetables oils as fuel. Energy from
biomass and more specific bio-diesel is one of the opportunities that
could cover the future demand of fossil fuel shortage. Biomass in the
form of cashew nut shell represents a new energy source and
abundant source of energy in India. The bio-fuel is derived from
cashew nut shell oil and its blend with diesel are promising
alternative fuel for diesel engine. In this work the pyrolysis Cashew
Nut Shell Liquid (CNSL)-Diesel Blends (CDB) was used to run the
Direct Injection (DI) diesel engine. The experiments were conducted
with various blends of CNSL and Diesel namely B20, B40, B60, B80
and B100. The results are compared with neat diesel operation. The
brake thermal efficiency was decreased for blends of CNSL and
Diesel except the lower blends of B20. The brake thermal efficiency
of B20 is nearly closer to that of diesel fuel. Also the emission level
of the all CNSL and Diesel blends was increased compared to neat
diesel. The higher viscosity and lower volatility of CNSL leads to
poor mixture formation and hence lower brake thermal efficiency and
higher emission levels. The higher emission level can be reduced by
adding suitable additives and oxygenates with CNSL and Diesel
blends.
Abstract: Network layer multicast, i.e. IP multicast, even after
many years of research, development and standardization, is not
deployed in large scale due to both technical (e.g. upgrading of
routers) and political (e.g. policy making and negotiation) issues.
Researchers looked for alternatives and proposed application/overlay
multicast where multicast functions are handled by end hosts, not
network layer routers. Member hosts wishing to receive multicast
data form a multicast delivery tree. The intermediate hosts in the tree
act as routers also, i.e. they forward data to the lower hosts in the
tree. Unlike IP multicast, where a router cannot leave the tree until all
members below it leave, in overlay multicast any member can leave
the tree at any time thus disjoining the tree and disrupting the data
dissemination. All the disrupted hosts have to rejoin the tree. This
characteristic of the overlay multicast causes multicast tree unstable,
data loss and rejoin overhead. In this paper, we propose that each node
sets its leaving time from the tree and sends join request to a number
of nodes in the tree. The nodes in the tree will reject the request if
their leaving time is earlier than the requesting node otherwise they
will accept the request. The node can join at one of the accepting
nodes. This makes the tree more stable as the nodes will join the tree
according to their leaving time, earliest leaving time node being at the
leaf of the tree. Some intermediate nodes may not follow their leaving
time and leave earlier than their leaving time thus disrupting the tree.
For this, we propose a proactive recovery mechanism so that disrupted
nodes can rejoin the tree at predetermined nodes immediately. We
have shown by simulation that there is less overhead when joining
the multicast tree and the recovery time of the disrupted nodes is
much less than the previous works. Keywords
Abstract: This paper presents the significant factor and give
some suggestion that should know before design. The main objective of this paper is guide the first step for someone who attends to design of grounding system before study in details later. The overview of
grounding system can protect damage from fault such as can save a human life and power system equipment. The unsafe conditions have
three cases. Case 1) maximum touch voltage exceeds the safety
criteria. In this case, the conductor compression ratio of the ground gird should be first adjusted to have optimal spacing of ground grid
conductors. If it still over limit, earth resistivity should be consider afterward. Case 2) maximum step voltage exceeds the safety criteria.
In this case, increasing the number of ground grid conductors around
the boundary can solve this problem. Case 3) both of maximum touch
and step voltage exceed the safety criteria. In this case, follow the solutions explained in case 1 and case 2. Another suggestion, vary depth of ground grid until maximum step and touch voltage do not
exceed the safety criteria.
Abstract: A model predictive controller based on recursive learning is proposed. In this SISO adaptive controller, a model is automatically updated using simple recursive equations. The identified models are then stored in the memory to be re-used in the future. The decision for model update is taken based on a new control performance index. The new controller allows the use of simple linear model predictive controllers in the control of nonlinear time varying processes.
Abstract: Increasing growth of information volume in the
internet causes an increasing need to develop new (semi)automatic
methods for retrieval of documents and ranking them according to
their relevance to the user query. In this paper, after a brief review
on ranking models, a new ontology based approach for ranking
HTML documents is proposed and evaluated in various
circumstances. Our approach is a combination of conceptual,
statistical and linguistic methods. This combination reserves the
precision of ranking without loosing the speed. Our approach
exploits natural language processing techniques to extract phrases
from documents and the query and doing stemming on words. Then
an ontology based conceptual method will be used to annotate
documents and expand the query. To expand a query the spread
activation algorithm is improved so that the expansion can be done
flexible and in various aspects. The annotated documents and the
expanded query will be processed to compute the relevance degree
exploiting statistical methods. The outstanding features of our
approach are (1) combining conceptual, statistical and linguistic
features of documents, (2) expanding the query with its related
concepts before comparing to documents, (3) extracting and using
both words and phrases to compute relevance degree, (4) improving
the spread activation algorithm to do the expansion based on
weighted combination of different conceptual relationships and (5)
allowing variable document vector dimensions. A ranking system
called ORank is developed to implement and test the proposed
model. The test results will be included at the end of the paper.
Abstract: Finite impulse response (FIR) filters have the advantage of linear phase, guaranteed stability, fewer finite precision errors, and efficient implementation. In contrast, they have a major disadvantage of high order need (more coefficients) than IIR counterpart with comparable performance. The high order demand imposes more hardware requirements, arithmetic operations, area usage, and power consumption when designing and fabricating the filter. Therefore, minimizing or reducing these parameters, is a major goal or target in digital filter design task. This paper presents an algorithm proposed for modifying values and the number of non-zero coefficients used to represent the FIR digital pulse shaping filter response. With this algorithm, the FIR filter frequency and phase response can be represented with a minimum number of non-zero coefficients. Therefore, reducing the arithmetic complexity needed to get the filter output. Consequently, the system characteristic i.e. power consumption, area usage, and processing time are also reduced. The proposed algorithm is more powerful when integrated with multiplierless algorithms such as distributed arithmetic (DA) in designing high order digital FIR filters. Here the DA usage eliminates the need for multipliers when implementing the multiply and accumulate unit (MAC) and the proposed algorithm will reduce the number of adders and addition operations needed through the minimization of the non-zero values coefficients to get the filter output.
Abstract: Reliability is one of the most important quality attributes of software. Based on the approach of Reussner and the approach of Cheung, we proposed the reliability prediction model of component-based software architectures. Also, the value of the model is shown through the experimental evaluation on a web server system.
Abstract: The bit error rate (BER) performance for ultra-wide
band (UWB) indoor communication with impact of metallic furniture
is investigated. The impulse responses of different indoor
environments for any transmitter and receiver location are computed
by shooting and bouncing ray/image and inverse Fourier transform
techniques. By using the impulse responses of these multipath
channels, the BER performance for binary pulse amplitude
modulation (BPAM) impulse radio UWB communication system are
calculated. Numerical results have shown that the multi-path effect
by the metallic cabinets is an important factor for BER performance.
Also the outage probability for the UWB multipath environment with
metallic cabinets is more serious (about 18%) than with wooden
cabinets. Finally, it is worth noting that in these cases the present
work provides not only comparative information but also quantitative
information on the performance reduction.
Abstract: In the current research, neuro-fuzzy model and regression model was developed to predict Material Removal Rate in Electrical Discharge Machining process for AISI D2 tool steel with copper electrode. Extensive experiments were conducted with various levels of discharge current, pulse duration and duty cycle. The experimental data are split into two sets, one for training and the other for validation of the model. The training data were used to develop the above models and the test data, which was not used earlier to develop these models were used for validation the models. Subsequently, the models are compared. It was found that the predicted and experimental results were in good agreement and the coefficients of correlation were found to be 0.999 and 0.974 for neuro fuzzy and regression model respectively
Abstract: In this paper, some practical solid transportation models are formulated considering per trip capacity of each type of conveyances with crisp and rough unit transportation costs. This is applicable for the system in which full vehicles, e.g. trucks, rail coaches are to be booked for transportation of products so that transportation cost is determined on the full of the conveyances. The models with unit transportation costs as rough variables are transformed into deterministic forms using rough chance constrained programming with the help of trust measure. Numerical examples are provided to illustrate the proposed models in crisp environment as well as with unit transportation costs as rough variables.
Abstract: The overall penumbra is usually defined as the
distance, p20–80, separating the 20% and 80% of the dose on the beam axis at the depth of interest. This overall penumbra accounts
also for the fact that some photons emitted by the distal parts of the source are only partially attenuated by the collimator. Medulloblastoma is the most common type of childhood brain tumor
and often spreads to the spine. Current guidelines call for surgery to remove as much of the tumor as possible, followed by radiation of the brain and spinal cord, and finally treatment with chemotherapy.
The purpose of this paper was to present results on an Uniformity of dose distribution in radiation fields surrounding the spine using film
dosimetry and comparison with 3D treatment planning software.