Abstract: With the demand of mobility by users, wireless
technologies have become the hotspot developing arena. Internet
Engineering Task Force (IETF) working group has developed Mobile
IP to support node mobility. The concept of node mobility indicates
that in spite of the movement of the node, it is still connected to the
internet and all the data transactions are preserved. It provides
location-independent access to Internet. After the incorporation of
host mobility, network mobility has undergone intense research.
There are several intricacies faced in the real world implementation
of network mobility significantly the problem of nested networks and
their consequences. This article is concerned regarding a problem of
nested network called pinball route problem and proposes a solution
to eliminate the above problem. The proposed mechanism is
implemented using NS2 simulation tool and it is found that the
proposed mechanism efficiently reduces the overload caused by the
pinball route problem.
Abstract: This paper describes a novel method for automatic
estimation of the contours of weld defect in radiography images.
Generally, the contour detection is the first operation which we apply
in the visual recognition system. Our approach can be described as a
region based maximum likelihood formulation of parametric
deformable contours. This formulation provides robustness against
the poor image quality, and allows simultaneous estimation of the
contour parameters together with other parameters of the model.
Implementation is performed by a deterministic iterative algorithm
with minimal user intervention. Results testify for the very good
performance of the approach especially in synthetic weld defect
images.
Abstract: Staphylococcus aureus, one of the microflora in a
human external auditory canal (EAC) is frequently exposed to highfrequency
electromagnetic field (HF-EMF) generated by mobile
phones. It is normally non-pathogenic but in certain circumstances, it
can cause infections. This study investigates the changes in the
physiology of S. aureus when exposed to HF-EMF of a mobile
phone. Exponentially grown S. aureus were exposed to two
conditions of EMF irradiation (standby-mode and on-call mode) at
four durations; 15, 30, 45 and 60 min. Changes in the viability and
biofilm production of the S. aureus were compared between the two
conditions of exposure. EMF from the standby-mode has enhanced
the growth of S. aureus but during on-call, the growth was
suppressed. No significant difference in the amount of biofilm
produced in both modes of exposure was observed. Thus, HF-EMF
of mobile phone affects the viability of S. aureus but not its ability to
produce biofilm.
Abstract: In the meat processing industry the substitution of
meat with non-meat ingredients is considered an important strategy
for reducing overall production costs. The main purpose of the
current research was to evaluate differences in physical-chemical
composition of cooked sausage with different legumes additions.
Peas (Pisum sativum), beans (Phaseolus vulgaris) and lentil (Lens
culinaris) were used in preparation of sausages. The legumes at
proportion of 20% of the total weight of meat were added in
sausages. The whole ingredients were mixed, filled into casing,
compressed, cooked and cooled. After storage the samples were
sensory evaluated. The sensory evaluation was carried out using the
nine point hedonic scale and line scale. Sausages without legumes
flour was used as control sample. The main conclusion of the current
research the legumes flour can be successfully used for cooked
sausages production.
Abstract: In this paper, we present the preconditioned mixed-type
splitting iterative method for solving the linear systems, Ax = b,
where A is a Z-matrix. And we give some comparison theorems
to show that the convergence rate of the preconditioned mixed-type
splitting iterative method is faster than that of the mixed-type splitting
iterative method. Finally, we give a numerical example to illustrate
our results.
Abstract: Micro power sources are required to be used in autonomous microelectromechanical system (MEMS). In this paper,
we designed and fabricated a three dimensional (3D) MEMS supercapacitor, which is consisting of conformal silicon
dioxide/titanium/polypyrrole (PPy) layers on silicon substrate. At first, ''through-structure'' was fabricated on the silicon substrate by high-aspect-ratio deep reactive ion etching (DRIE) method, which enlarges the available surface area significantly. Then the SiO2/Ti/PPy layers grew sequentially on the ³through-structure´. Finally, the supercapacitor was investigated by electrochemical methods.
Abstract: By means of Contractor Iteration Method, we solve and visualize the Lane-Emden(-Fowler) equation Δu + up = 0, in Ω, u = 0, on ∂Ω. It is shown that the present method converges quadratically as Newton’s method and the computation of Contractor Iteration Method is cheaper than the Newton’s method.
Abstract: An application framework provides a reusable design
and implementation for a family of software systems. Application
developers extend the framework to build their particular
applications using hooks. Hooks are the places identified to show
how to use and customize the framework. Hooks define the
Framework Interface Classes (FICs) and their possible specifications,
which helps in building reusable test cases for the implementations of
these classes. This paper introduces a novel technique called all
paths-state to generate state-based test cases to test the FICs at class
level. The technique is experimentally evaluated. The empirical
evaluation shows that all paths-state technique produces test cases
with a high degree of coverage for the specifications of the
implemented FICs comparing to test cases generated using round-trip
path and all-transition techniques.
Abstract: Medical services are usually provided in hospitals; however, in developing country, some rural residences have fewer opportunities to access in healthcare services due to the limitation of transportation communication. Therefore, in Thailand, there are charitable organizations operating to provide medical treatments to these people by shifting the medical services to operation sites; this is commonly known as mobile medical service. Operation routing is important for the organization to reduce its transportation cost in order to focus more on other important activities; for instance, the development of medical apparatus. VRP is applied to solve the problem of high transportation cost of the studied organization with the searching techniques of saving algorithm to find the minimum total distance of operation route and satisfy available time constraints of voluntary medical staffs.
Abstract: The important issue considered in the widespread deployment of Wireless Sensor Networks (WSNs) is an efficiency of the energy consumption. In this paper, we present a study of the optimal relay station planning problems using Binary Integer Linear Programming (BILP) model to minimize the energy consumption in WSNs. Our key contribution is that the proposed model not only ensures the required network lifetime but also guarantees the radio connectivity at high level of communication quality. Specially, we take into account effects of noise, signal quality limitation and bit error rate characteristics. Numerical experiments were conducted in various network scenarios. We analyzed the effects of different sensor node densities and distribution on the energy consumption.
Abstract: In this paper, a thermal model of cast- resin dry type
transformer is proposed. The proposed thermal model is solved by
finite element technique to get the temperature at any location of the
transformer. The basic modes of heat transfer such as conduction;
convection and radiation are used to get the steady state temperature
distribution of the transformer. The predicted temperatures are
compared with experimental results reported in this paper and it is
found a good agreement between them. The effects of various
parameters such as width of air duct, ambient temperature and
emissivity of the outer surface were also studied.
Abstract: This paper proposes the method combining artificial neural network with particle swarm optimization (PSO) to implement the maximum power point tracking (MPPT) by controlling the rotor speed of the wind generator. With the measurements of wind speed, rotor speed of wind generator and output power, the artificial neural network can be trained and the wind speed can be estimated. The proposed control system in this paper provides a manner for searching the maximum output power of wind generator even under the conditions of varying wind speed and load impedance.
Abstract: Separation of propylene-propane mixture using
immobilized liquid membrane was investigated. The effect of transmembrane
pressure and carrier concentration on membrane
separation performance was studied. It was observed that for 30:70
(vol. %) propylene-propane mixture, at pressure of 120kPa and
carrier concentration of 20wt. %, a separation factor of 474 was
obtained.
Abstract: A Decision Support System/Expert System for stock
portfolio selection presented where at first step, both technical and
fundamental data used to estimate technical and fundamental return
and risk (1st phase); Then, the estimated values are aggregated with
the investor preferences (2nd phase) to produce convenient stock
portfolio.
In the 1st phase, there are two expert systems, each of which is
responsible for technical or fundamental estimation. In the technical
expert system, for each stock, twenty seven candidates are identified
and with using rough sets-based clustering method (RC) the effective
variables have been selected. Next, for each stock two fuzzy rulebases
are developed with fuzzy C-Mean method and Takai-Sugeno-
Kang (TSK) approach; one for return estimation and the other for
risk. Thereafter, the parameters of the rule-bases are tuned with backpropagation
method. In parallel, for fundamental expert systems,
fuzzy rule-bases have been identified in the form of “IF-THEN" rules
through brainstorming with the stock market experts and the input
data have been derived from financial statements; as a result two
fuzzy rule-bases have been generated for all the stocks, one for return
and the other for risk.
In the 2nd phase, user preferences represented by four criteria and
are obtained by questionnaire. Using an expert system, four estimated
values of return and risk have been aggregated with the respective
values of user preference. At last, a fuzzy rule base having four rules,
treats these values and produce a ranking score for each stock which
will lead to a satisfactory portfolio for the user.
The stocks of six manufacturing companies and the period of
2003-2006 selected for data gathering.
Abstract: Packing problems arise in a wide variety of application
areas. The basic problem is that of determining an efficient arrangement
of different objects in a region without any overlap and
with minimal wasted gap between shapes. This paper presents a
novel population based approach for optimizing arrangement of irregular
shapes. In this approach, each shape is coded as an agent and
the agents' reproductions and grouping policies results in arrangements
of the objects in positions with least wasted area between
them. The approach is implemented in an application for cutting
sheets and test results on several problems from literature are presented.
Abstract: Liquid-liquid extraction is a process using two immiscible
liquids to extract compounds from one phase without high
temperature requirement. Mostly, the technical implementation of
this process is carried out in mixer-settlers or extraction columns. In
real chemical processes, chemicals may have high viscosity and
contain impurities. These impurities may change the settling behavior
of the process without measurably changing the physical properties
of the phases. In the current study, the settling behavior and the affected
parameters in a high-viscosity system were observed. Batchsettling
experiments were performed to experimentally quantify the
settling behavior and the mixer-settler model of Henschke [1] was
used to evaluate the behavior of the toluene + water system. The
viscosity of the system was increased by adding polyethylene glycol
4000 to the aqueous phase. NaCl and Na2SO4 were used to study the
influence of electrolytes. The results from this study show that increasing
the viscosity of water has a higher influence on the settling
behavior in comparison to the effects of the electrolytes. It can be
seen from the experiments that at high salt concentrations, there was
no effect on the settling behavior.
Abstract: The development and use of mobile devices as well as its integration within education systems to deliver electronic contents and to support real-time communications was the focus of this research. In order to investigate the software engineering issues in using mobile devices a research on electronic content was initiated. The Developed MP3 mobile software solution was developed as a prototype for testing and developing a strategy for designing a usable m-learning environment. The mobile software solution was evaluated using mobile device using the link: http://projects.seeu.edu.mk/mlearn. The investigation also tested the correlation between the two mobile learning indicators: electronic content and attention, based on the Task Based learning instructional method. The mobile software solution ''M-Learn“ was developed as a prototype for testing the approach and developing a strategy for designing usable m-learning environment. The proposed methodology is about what learning modeling approach is more appropriate to use when developing mobile learning software.
Abstract: This research paper designs a unique motion planner
of multiple platoons of nonholonomic car-like robots as a feasible
solution to the lane changing/merging maneuvers. The decentralized
planner with a leaderless approach and a path-guidance principle
derived from the Lyapunov-based control scheme generates collision
free avoidance and safe merging maneuvers from multiple lanes to a
single lane by deploying a split/merge strategy. The fixed obstacles
are the markings and boundaries of the road lanes, while the moving
obstacles are the robots themselves. Real and virtual road lane
markings and the boundaries of road lanes are incorporated into a
workspace to achieve the desired formation and configuration of the
robots. Convergence of the robots to goal configurations and the
repulsion of the robots from specified obstacles are achieved by
suitable attractive and repulsive potential field functions,
respectively. The results can be viewed as a significant contribution
to the avoidance algorithm of the intelligent vehicle systems (IVS).
Computer simulations highlight the effectiveness of the split/merge
strategy and the acceleration-based controllers.
Abstract: Fuel cell is an emerging technology in the field
of renewable energy sources which has the capacity to replace
conventional energy generation sources. Fuel cell utilizes hydrogen
energy to produce electricity. The electricity generated by the fuel
cell can’t be directly used for a specific application as it needs
proper power conditioning. Moreover, the output power fluctuates
with different operating conditions. To get a stable output power
at an economic rate, power conditioning circuit is essential for fuel
cell. This paper implements a two-staged power conditioning unit for
fuel cell based distributed generation using hysteresis current control
technique.
Abstract: In the article the experience of principle new
technology development of ethnopsychological experiment on the
basis of using other virtual independent experimental variables is
presented. It is shown that ethnic prejudices are the result of forming
and development of specific semantic barriers, arising up in the
conditions of interethnic co-operation and people-s communication.
Their overcoming is more successful in the conditions of the special
organized process of teaching in a polyethnic environment,
characteristic for the modern institute