Abstract: The complexity of today-s software systems makes
collaborative development necessary to accomplish tasks.
Frameworks are necessary to allow developers perform their tasks
independently yet collaboratively. Similarity detection is one of the
major issues to consider when developing such frameworks. It allows
developers to mine existing repositories when developing their own
views of a software artifact, and it is necessary for identifying the
correspondences between the views to allow merging them and
checking their consistency. Due to the importance of the
requirements specification stage in software development, this paper
proposes a framework for collaborative development of Object-
Oriented formal specifications along with a similarity detection
approach to support the creation, merging and consistency checking
of specifications. The paper also explores the impact of using
additional concepts on improving the matching results. Finally, the
proposed approach is empirically evaluated.
Abstract: Simultaneous transient conduction and radiation heat
transfer with heat generation is investigated. Analysis is carried out
for both steady and unsteady situations. two-dimensional gray
cylindrical enclosure with an absorbing, emitting, and isotropically
scattering medium is considered. Enclosure boundaries are assumed
at specified temperatures. The heat generation rate is considered
uniform and constant throughout the medium. The lattice Boltzmann
method (LBM) was used to solve the energy equation of a transient
conduction-radiation heat transfer problem. The control volume finite
element method (CVFEM) was used to compute the radiative
information. To study the compatibility of the LBM for the energy
equation and the CVFEM for the radiative transfer equation, transient
conduction and radiation heat transfer problems in 2-D cylindrical
geometries were considered. In order to establish the suitability of the
LBM, the energy equation of the present problem was also solved
using the the finite difference method (FDM) of the computational
fluid dynamics. The CVFEM used in the radiative heat transfer was
employed to compute the radiative information required for the
solution of the energy equation using the LBM or the FDM (of the
CFD). To study the compatibility and suitability of the LBM for the
solution of energy equation and the CVFEM for the radiative
information, results were analyzed for the effects of various
parameters such as the boundary emissivity. The results of the LBMCVFEM
combination were found to be in excellent agreement with
the FDM-CVFEM combination. The number of iterations and the
steady state temperature in both of the combinations were found
comparable. Results are found for situations with and without heat
generation. Heat generation is found to have significant bearing on
temperature distribution.
Abstract: In this paper, we propose a reversible watermarking
scheme based on histogram shifting (HS) to embed watermark bits
into the H.264/AVC standard videos by modifying the last nonzero
level in the context adaptive variable length coding (CAVLC) domain.
The proposed method collects all of the last nonzero coefficients (or
called last level coefficient) of 4×4 sub-macro blocks in a macro
block and utilizes predictions for the current last level from the
neighbor block-s last levels to embed watermark bits. The feature of
the proposed method is low computational and has the ability of
reversible recovery. The experimental results have demonstrated that
our proposed scheme has acceptable degradation on video quality and
output bit-rate for most test videos.
Abstract: Classification of video sequences based on their contents is a vital process for adaptation techniques. It helps decide which adaptation technique best fits the resource reduction requested by the client. In this paper we used the principal feature analysis algorithm to select a reduced subset of video features. The main idea is to select only one feature from each class based on the similarities between the features within that class. Our results showed that using this feature reduction technique the source video features can be completely omitted from future classification of video sequences.
Abstract: This work presents the results of a study carried out to
determine the sliding wear behavior and its effect on the process
parameters of components manufactured by direct metal laser
sintering (DMLS). A standard procedure and specimen had been used
in the present study to find the wear behavior. Using Taguchi-s
experimental technique, an orthogonal array of modified L8 had been
developed. Sliding wear testing using pin-on-disk machine was
carried out and analysis of variance (ANOVA) technique was used to
investigate the effect of process parameters and to identify the main
process parameter that influences the properties of wear behavior on
the DMLS components. It has been found that part orientation, one
of the selected process parameter had more influence on wear as
compared to other selected process parameters.
Abstract: This work presents the highly accurate numerical calculation
of the natural frequencies for functionally graded beams with
simply supported boundary conditions. The Timoshenko first order
shear deformation beam theory and the higher order shear deformation
beam theory of Reddy have been applied to the functionally
graded beams analysis. The material property gradient is assumed
to be in the thickness direction. The Hamilton-s principle is utilized
to obtain the dynamic equations of functionally graded beams. The
influences of the volume fraction index and thickness-to-length ratio
on the fundamental frequencies are discussed. Comparison of the
numerical results for the homogeneous beam with Euler-Bernoulli
beam theory results show that the derived model is satisfactory.
Abstract: In view of current IT integration development of SOA, this paper examines AIS design based on SOA, including information sources collection, accounting business process integration and real-time financial reports. The main objective of this exploratory paper is to facilitate AIS research combing the Web Service, which is often ignored in accounting and computer research. It provides a conceptual framework that clarifies the interdependency between SOA and AIS, and also presents the major SOA functions in different areas of AIS
Abstract: Convergence of power series solutions for a class of
non-linear Abel type equations, including an equation that arises
in nonlinear cooling of semi-infinite rods, is very slow inside their
small radius of convergence. Beyond that the corresponding power
series are wildly divergent. Implementation of nonlinear sequence
transformation allow effortless evaluation of these power series on
very large intervals..
Abstract: In this paper presented initial design of Low Speed
Axial Flux Permanent Magnet (AFPM) Machine with Non-Slotted
TORUS topology type by use of certain algorithm (Appendix).
Validation of design algorithm studied by means of selected data of
an initial prototype machine. Analytically design calculation carried
out by means of design algorithm and obtained results compared with
results of Finite Element Method (FEM).
Abstract: Soccer simulation is an effort to motivate researchers and practitioners to do artificial and robotic intelligence research; and at the same time put into practice and test the results. Many researchers and practitioners throughout the world are continuously working to polish their ideas and improve their implemented systems. At the same time, new groups are forming and they bring bright new thoughts to the field. The research includes designing and executing robotic soccer simulation algorithms. In our research, a soccer simulation player is considered to be an intelligent agent that is capable of receiving information from the environment, analyze it and to choose the best action from a set of possible ones, for its next move. We concentrate on developing a two-phase method for the soccer player agent to choose its best next move. The method is then implemented into our software system called Nexus simulation team of Ferdowsi University. This system is based on TsinghuAeolus[1] team that was the champion of the world RoboCup soccer simulation contest in 2001 and 2002.
Abstract: One of the main concerns in the Information Technology field is adoption with new technologies in organizations which may result in increasing the usage paste of these technologies.This study aims to look at the issue of culture-s role in accepting and using new technologies in organizations. The study examines the effect of culture on accepting and intention to use new technology in organizations. Studies show culture is one of the most important barriers in adoption new technologies. The model used for accepting and using new technology is Technology Acceptance Model (TAM), while for culture and dimensions a well-known theory by Hofsted was used. Results of the study show significant effect of culture on intention to use new technologies. All four dimensions of culture were tested to find the strength of relationship with behavioral intention to use new technologies. Findings indicate the important role of culture in the level of intention to use new technologies and different role of each dimension to improve adaptation process. The study suggests that transferring of new technologies efforts are most likely to be successful if the parties are culturally aligned.
Abstract: Toughening of polyamide 6 (PA6)/ Nanoclay (NC) nanocomposites with styrene-ethylene/butadiene-styrene copolymer (SEBS) using maleated styrene-ethylene/butadiene-styrene copolymer (mSEBS)/ as a compatibilizer were investigated by blending them in a co-rotating twin-screw extruder. Response surface method of experimental design was used for optimizing the material and processing parameters. Effect of four factors, including SEBS, mSEBS and NC contents as material variables and order of mixing as a processing factor, on toughness of hybrid nanocomposites were studied. All the prepared samples showed ductile behavior and low temperature Izod impact toughness of some of the hybrid nanocomposites demonstrated 900% improvement compared to the PA6 matrix while the modulus showed maximum enhancement of 20% compared to the pristine PA6 resin.
Abstract: Prestressing in structure increases ratio of load-bearing capacity to weight. Suspendomes are single-layer braced domes reinforced with cable and strut. Prestressing of cables alter value and distribution of stress in structure. In this study two configuration, diamatic and lamella domes is selected. Investigated domes have span of 100m with rise-to-span ratios of 0.1, 0.2, and 0.3. Single layer domes loaded under service load combinations according to ISO code. After geometric nonlinear analysis, models are designed with tubular and I-shaped sections then reinforced with cable and strut and converted to suspendomes. Displacements and stresses of some groups of nodes and elements in all of single-layer domes and suspendomes for three load combinations, symmetric snow, asymmetric snow and wind are compared. Variation due to suspending system is investigated. Suspendomes are redesigned and minimum possible weight after addition of cable and strut is obtained.
Abstract: Subjective loneliness describes people who feel a
disagreeable or unacceptable lack of meaningful social relationships,
both at the quantitative and qualitative level. The studies to be
presented tested an Italian 18-items self-report loneliness measure,
that included items adapted from scales previously developed,
namely a short version of the UCLA (Russell, Peplau and Cutrona,
1980), and the 11-items Loneliness scale by De Jong-Gierveld &
Kamphuis (JGLS; 1985). The studies aimed at testing the developed
scale and at verifying whether loneliness is better conceptualized as a
unidimensional (so-called 'general loneliness') or a bidimensional
construct, namely comprising the distinct facets of social and
emotional loneliness. The loneliness questionnaire included 2 singleitem
criterion measures of sad mood, and social contact, and asked
participants to supply information on a number of socio-demographic
variables. Factorial analyses of responses obtained in two
preliminary studies, with 59 and 143 Italian participants respectively,
showed good factor loadings and subscale reliability and confirmed
that perceived loneliness has clearly two components, a social and an
emotional one, the latter measured by two subscales, a 7-item
'general' loneliness subscale derived from UCLA, and a 6–item
'emotional' scale included in the JGLS. Results further showed that
type and amount of loneliness are related, negatively, to frequency of
social contacts, and, positively, to sad mood. In a third study data
were obtained from a nation-wide sample of 9.097 Italian subjects,
12 to about 70 year-olds, who filled the test on-line, on the Italian
web site of a large-audience magazine, Focus. The results again
confirmed the reliability of the component subscales, namely social,
emotional, and 'general' loneliness, and showed that they were
highly correlated with each other, especially the latter two.
Loneliness scores were significantly predicted by sex, age, education
level, sad mood and social contact, and, less so, by other variables –
e.g., geographical area and profession. The scale validity was
confirmed by the results of a fourth study, with elderly men and
women (N 105) living at home or in residential care units. The three
subscales were significantly related, among others, to depression, and
to various measures of the extension of, and satisfaction with, social
contacts with relatives and friends. Finally, a fifth study with 315
career-starters showed that social and emotional loneliness correlate
with life satisfaction, and with measures of emotional intelligence.
Altogether the results showed a good validity and reliability in the
tested samples of the entire scale, and of its components.
Abstract: The objective is to fabricate organic light emitting
diode and to study its degradation process in atmosphere condition in
which PFO as an emitting material and PEDOT:PSS as a hole
injecting material were used on ITO substrate. Thus degradation
process of the OLED was studied upon its current-voltage
characteristic. By fabricating this OLED and obtaining blue light and
analysis of current-voltage characteristic during the time after
fabrication, it was observed that the current of the OLED was
exponentially decreased. Current reduction during the initial hours of
fabrication was outstanding and after few days its reduction rate was
dropped significantly, while the diode was dying.
Abstract: This paper presents a numerical analysis of the
seismic behaviour of earth dams. Analysis is conducted for the solid
phase. It may correspond to the response of the dam before water
filling. Analysis is conducted for a simple case which concerns the
elastic response of the dam. Numerical analyses are conducted using
the FLAC3D program. The behaviour of the Shell and core of the
dam and the foundation behaviour is assumed to be elastic. Result
shows the influence of the variation of the shear modulus of the core
and shell on the seismic amplification of the dam. It can be observed
that the variation of the shearing modulus of the core leads to a
moderate increase in the dynamic amplification and the increase in
the shell shearing modulus leads to a significant increase in the
dynamic amplification.
Abstract: Transmission control protocol (TCP) Vegas detects
network congestion in the early stage and successfully prevents
periodic packet loss that usually occurs in TCP Reno. It has been
demonstrated that TCP Vegas outperforms TCP Reno in many
aspects. However, TCP Vegas suffers several problems that affect its
congestion avoidance mechanism. One of the most important
weaknesses in TCP Vegas is that alpha and beta depend on a good
expected throughput estimate, which as we have seen, depends on a
good minimum RTT estimate. In order to make the system more
robust alpha and beta must be made responsive to network conditions
(they are currently chosen statically). This paper proposes a modified
Vegas algorithm, which can be adjusted to present good performance
compared to other transmission control protocols (TCPs). In order to
do this, we use PSO algorithm to tune alpha and beta. The simulation
results validate the advantages of the proposed algorithm in term of
performance.
Abstract: The analysis to detect arrhythmias and life-threatening
conditions are highly essential in today world and this analysis
can be accomplished by advanced non-linear processing methods
for accurate analysis of the complex signals of heartbeat dynamics.
In this perspective, recent developments in the field of multiscale
information content have lead to the Microcanonical Multiscale
Formalism (MMF). We show that such framework provides several
signal analysis techniques that are especially adapted to the
study of heartbeat dynamics. In this paper, we just show first hand
results of whether the considered heartbeat dynamics signals have
the multiscale properties by computing local preticability exponents
(LPEs) and the Unpredictable Points Manifold (UPM), and thereby
computing the singularity spectrum.
Abstract: Cellular networks provide voice and data services to the users with mobility. To deliver services to the mobile users, the cellular network is capable of tracking the locations of the users, and allowing user movement during the conversations. These capabilities are achieved by the location management. Location management in mobile communication systems is concerned with those network functions necessary to allow the users to be reached wherever they are in the network coverage area. In a cellular network, a service coverage area is divided into smaller areas of hexagonal shape, referred to as cells. The cellular concept was introduced to reuse the radio frequency. Continued expansion of cellular networks, coupled with an increasingly restricted mobile spectrum, has established the reduction of communication overhead as a highly important issue. Much of this traffic is used in determining the precise location of individual users when relaying calls, with the field of location management aiming to reduce this overhead through prediction of user location. This paper describes and compares various location management schemes in the cellular networks.
Abstract: The objective of current issue was to develop a model
of testicular herpes simplex virus (HSV) type I infection for
assessment of viral effect on fertility. 56 male mice were inoculated
intraperitoneally with different concentrations of HSV on 8 day post
partum. It was revealed that the optimal dose was 100 plaque
forming units per mice as it provided testicular infection in 100% of
survivors. HSV proteins were detected both in somatic and germ
cells (spermatogonia, spermatocytes, spermatides). Although DNA
load in testis was descending from 3 to 28 days post infection only
12.5% of infected males had offspring after mating with uninfected
females comparing to 87.5% in control (p=0.012). These results are
the first direct evidence for HSV impact in male sterility. Prepuberal
mice appeared to be a suitable model for investigation of
pathogenesis of virus-associated fertility disorders.