Abstract: Aspect of visual perception occupies a central position
in shaping the physical structure of a city. This paper discusses the
visual characteristics of utopian cities and their impact on the shaping
of real urban structures. Utopian examples of cities will not be
discussed in terms of social and sociological conditions, but rather
the emphasis is on urban utopias and ideal cities that have achieved
or have had potential impact on the shape of the physical structure of
Nikšić. It is a Renaissance-Baroque period with a touch of classicism.
The paper’s emphasis is on the physical dimension, not excluding the
importance of social equilibrium, studies of which are dating back to
Aristotle, Plato, Thomas More, Robert Owen, Tommaso Campanella
and others. The emphasis is on urban utopias and their impact on the
development of sustainable physical structure of a real city in the
context of visual perception. In the case of Nikšić, this paper
identifies the common features of a real city and a utopian city, as
well as criteria for sustainable urban development in the context of
visual achievement.
Abstract: A new technique to quantify the differential mode
delay (DMD) in multimode fiber (MMF) is been presented. The
technique measures DMD based on angular launch and
measurements of the difference in modal delay using variable
apertures at the fiber face. The result of the angular spatial filtering
revealed less excitation of higher order modes when the laser beam is
filtered at higher angles. This result would indicate that DMD
profiles would experience a data pattern dependency.
Abstract: In this paper, backup and recovery technique for Peer
to Peer applications, such as a distributed asynchronous Web-Based
Training system that we have previously proposed. In order to
improve the scalability and robustness of this system, all contents and
function are realized on mobile agents. These agents are distributed
to computers, and they can obtain using a Peer to Peer network
that modified Content-Addressable Network. In the proposed system,
although entire services do not become impossible even if some
computers break down, the problem that contents disappear occurs
with an agent-s disappearance. As a solution for this issue, backups
of agents are distributed to computers. If a failure of a computer is
detected, other computers will continue service using backups of the
agents belonged to the computer.
Abstract: This study examines the structural and systematic processes of the Human Resources Division at The University of the West Indies, St. Augustine, Trinidad and Tobago for evidence of incorporation of the University's 2012- 2017 Strategic Plan. In conducting the study the structure of the Human Resources Management Division and its functions were carefully reviewed and measured against the strategic direction of the organisation. Findings indicate disconnect between these areas as there is apparent failure of the Human Resources Division to totally align its mandate with that of the organisation-s strategic direction. This action serves to threaten the viability of the organisation and its efficiency and effectiveness as an institution. The recommendations being put forward are for the realignment of the Human Resources Management Division and for its focus to mirror that of the organisation and the organisation-s goals and objectives. This may entail a restructuring of the Division.
Abstract: Aerial and satellite images are information rich. They are also complex to analyze. For GIS systems, many features require fast and reliable extraction of roads and intersections. In this paper, we study efficient and reliable automatic extraction algorithms to address some difficult issues that are commonly seen in high resolution aerial and satellite images, nonetheless not well addressed in existing solutions, such as blurring, broken or missing road boundaries, lack of road profiles, heavy shadows, and interfering surrounding objects. The new scheme is based on a new method, namely reference circle, to properly identify the pixels that belong to the same road and use this information to recover the whole road network. This feature is invariable to the shape and direction of roads and tolerates heavy noise and disturbances. Road extraction based on reference circles is much more noise tolerant and flexible than the previous edge-detection based algorithms. The scheme is able to extract roads reliably from images with complex contents and heavy obstructions, such as the high resolution aerial/satellite images available from Google maps.
Abstract: The use of externally bonded Carbon Fiber
Reinforced Polymer (CFRP) reinforcement has proven to be an
effective technique to strengthen steel structures. An experimental
study on CFRP bonded steel plate with double strap joint has been
conducted and specimens are tested under tensile loadings. An
empirical model has been developed using stress-based approach to
predict ultimate capacity of the CFRP bonded steel structure. The
results from the model are comparable with the experimental result
with a reasonable accuracy.
Abstract: In Iran, due to abundance of energy resources, energy consumption is extraordinarily higher than international standards and transportation sector is considered to be one of the major consumers of energy. Moreover, air pollution in urban areas as a result of high dependence on private vehicle and lower standards of vehicles, high subsidies spent on fuel and time waste due to traffic congestion in urban areas all have led to speculations on new strategies and policies in order to control energy consumption in transportation sector. These strategies and policies will be introduced in this paper and their consequences will be analyzed with consideration to socio-economic factors affecting the urban society of Iran. Besides, the intention is to suggest and analyze new approaches such as broader application of public transportation system, demand management in transport sector, replacement of deteriorated vehicles, quality improvement in car manufacture and introduction of substitute fuels.
Abstract: In this work the numerical simulation of transient heat
transfer in a cylindrical probe is done. An experiment was conducted
introducing a steel cylinder in a heating chamber and registering its
surface temperature along the time during one hour. In parallel, a
mathematical model was solved for one dimension transient heat
transfer in cylindrical coordinates, considering the boundary
conditions of the test. The model was solved using finite difference
method, because the thermal conductivity in the cylindrical steel bar
and the convection heat transfer coefficient used in the model are
considered temperature dependant functions, and both conditions
prevent the use of the analytical solution. The comparison between
theoretical and experimental results showed the average deviation is
below 2%. It was concluded that numerical methods are useful in
order to solve engineering complex problems. For constant k and h,
the experimental methodology used here can be used as a tool for
teaching heat transfer in mechanical engineering, using mathematical
simplified models with analytical solutions.
Abstract: An analytical solution for dispersion of a solute in the
peristaltic motion of a couple stress fluid in the presence of magnetic
field with both homogeneous and heterogeneous chemical reactions is
presented. The average effective dispersion coefficient has been found
using Taylor-s limiting condition and long wavelength approximation.
The effects of various relevant parameters on the average effective
coefficient of dispersion have been studied. The average effective
dispersion coefficient tends to decrease with magnetic field parameter,
homogeneous chemical reaction rate parameter and amplitude ratio
but tends to increase with heterogeneous chemical reaction rate
parameter.
Abstract: Obsessive-Compulsive Disorder (OCD) is a common
and disabling condition. Therapist-delivered treatments that use
exposure and response prevention have been found to be very
effective in treating OCD, although they are costly and associated
with high rates of attrition. Effective treatments that can be made
widely available without the need for therapist contact are urgently
needed. This case study represents the first published investigation of
a self-administered cognitive treatment for OCD in a 50-year old
female with a 20 year history of OCD. The treatment evaluation
occurred over 27 weeks, including 12 weeks of self-administration of
the Danger Ideation Reduction Therapy (DIRT) program. Decreases
of between 23% to 33% on measures from pre-treatment to follow-up
were observed. Bearing in mind the methodological limitations
associated with a case study, we conclude that the results reported
here are encouraging and indicate that further research effort
evaluating the effectiveness of self-administered DIRT is warranted.
Abstract: Recent progress in calculation of the one-loop selfenergy
of the electron bound in the Coulomb field is summarized.
The relativistic multipole expansion is introduced. This expansion
is based on a single assumption: except for the part of the time
component of the electron four-momentum corresponding to the
electron rest mass, the exchange of four-momentum between the
virtual electron and photon can be treated perturbatively. For non Sstates
and normalized difference n3En −E1 of the S-states this
itself yields very accurate results after taking the method to the third
order. For the ground state the perturbation treatment of the electron
virtual states with very high three-momentum is to be avoided. For
these states one can always rearrange the pertinent expression in such
a way that free-particle approximation is allowed. Combination of
the relativistic multipole expansion and free-particle approximation
yields very accurate result after taking the method to the ninth order.
These results are in very good agreement with the previous results
obtained by the partial wave expansion and definitely exclude the
possibility that the uncertainity in determination of the proton radius
comes from the uncertainity in the calculation of the one-loop selfenergy.
Abstract: High-voltage power transmission lines are the back
bone of electrical power utilities. The stability and continuous
monitoring of this critical infrastructure is pivotal. Nine-Sigma
representing Eskom Holding SOC limited, South Africa has a major
problem on proactive detection of fallen power lines and real time
sagging measurement together with slipping of such conductors. The
main objective of this research is to innovate RFID technology to
solve this challenge. Various options and technologies such as GPS,
PLC, image processing, MR sensors and etc., have been reviewed
and draw backs were made. The potential of RFID to give precision
measurement will be observed and presented. The future research
will look at magnetic and electrical interference as well as corona
effect on the technology.
Abstract: This paper proposes a synchronized random switching frequency pulse width modulation (SRSFPWM). In this technique, the clock signal is used to control the random noise frequency which is produced by the feedback voltage of a hysteresis circuit. These make the triangular carrier frequency equaling to the random noise frequency in each switching period with the symmetrical positive and negative slopes of triangular carrier. Therefore, there is no error voltage in PWM signal. The PSpice simulated results shown the proposed technique improved the performance in case of low frequency harmonics of PWM signal comparing with conventional random switching frequency PWM.
Abstract: School physical education, through its objectives and
contents, efficiently valorizes the pupils- abilities, developing them,
especially the coordinative skill component, which is the basis of
movement learning, of the development of the daily motility and also
of the special, refined motility required by the practice of certain
sports. Medium school age offers the nervous and motor substratum
needed for the acquisition of complex motor habits, a substratum that
is essential for the coordinative skill. Individuals differ as to the level
at which this function is performed, the extent to which this function
turns an individual into a person that is adapted and adaptable to
complex and various situations. Spatio-temporal orientation, together
with movement combination and coupling, and with kinesthetic,
balance, motor reaction, movement transformation and rhythm
differentiation form the coordinative skills. From our viewpoint,
these are characteristic features with high levels of manifestation in a
complex psychomotor act - valorizing the quality of one-s talent - as
well as indices pertaining to one-s psychomotor intelligence and
creativity.
Abstract: The design of a complete expansion that allows for
compact representation of certain relevant classes of signals is a
central problem in signal processing applications. Achieving such a
representation means knowing the signal features for the purpose of
denoising, classification, interpolation and forecasting. Multilayer
Neural Networks are relatively a new class of techniques that are
mathematically proven to approximate any continuous function
arbitrarily well. Radial Basis Function Networks, which make use of
Gaussian activation function, are also shown to be a universal
approximator. In this age of ever-increasing digitization in the
storage, processing, analysis and communication of information,
there are numerous examples of applications where one needs to
construct a continuously defined function or numerical algorithm to
approximate, represent and reconstruct the given discrete data of a
signal. Many a times one wishes to manipulate the data in a way that
requires information not included explicitly in the data, which is
done through interpolation and/or extrapolation.
Tidal data are a very perfect example of time series and many
statistical techniques have been applied for tidal data analysis and
representation. ANN is recent addition to such techniques. In the
present paper we describe the time series representation capabilities
of a special type of ANN- Radial Basis Function networks and
present the results of tidal data representation using RBF. Tidal data
analysis & representation is one of the important requirements in
marine science for forecasting.
Abstract: This paper discusses coordinated reactive power -
voltage (Q-V) control in a multi machine steam power plant. The
drawbacks of manual Q-V control are briefly listed, and the design
requirements for coordinated Q-V controller are specified.
Theoretical background and mathematical model of the new
controller are presented next followed by validation of developed
Matlab/Simulink model through comparison with recorded
responses in real steam power plant and description of practical
realisation of the controller. Finally, the performance of
commissioned controller is illustrated on several examples of
coordinated Q-V control in real steam power plant and compared
with manual control.
Abstract: This paper presents the determination of the proper
quality costs parameters which provide the optimum return. The
system dynamics simulation was applied. The simulation model was
constructed by the real data from a case of the electronic devices
manufacturer in Thailand. The Steepest Descent algorithm was
employed to optimise. The experimental results show that the
company should spend on prevention and appraisal activities for 850
and 10 Baht/day respectively. It provides minimum cumulative total
quality cost, which is 258,000 Baht in twelve months. The effect of
the step size in the stage of improving the variables to the optimum
was also investigated. It can be stated that the smaller step size
provided a better result with more experimental runs. However, the
different yield in this case is not significant in practice. Therefore, the
greater step size is recommended because the region of optima could
be reached more easily and rapidly.
Abstract: It is necessary to incorporate technological advances
achieved in the field of engineering into dentistry in order to enhance
the process of diagnosis, treatment planning and enable the doctors to
render better treatment to their patients. To achieve this ultimate goal
long distance collaborations are often necessary. This paper discusses
the various collaborative tools and their applications to solve a few
burning problems confronted by the dentists. Customization is often
the solution to most of the problems. But rapid designing,
development and cost effective manufacturing is a difficult task to
achieve. This problem can be solved using the technique of digital
manufacturing. Cases from 6 major branches of dentistry have been
discussed and possible solutions with the help of state of art
technology using rapid digital manufacturing have been proposed in
the present paper. The paper also entails the usage of existing tools in
collaborative and digital manufacturing area.
Abstract: The purpose of this paper is to describe the process of
setting up a learning community within an elementary school in
Ontario, Canada. The description is provided through reflection and
examination of field notes taken during the yearlong training and
implementation process. Specifically the impact of teachers- capacity
on the creation of a learning community was of interest. This paper is
intended to inform and add to the debate around the tensions that
exist in implementing a bottom-up professional development model
like the learning community in a top-down organizational structure.
My reflections of the process illustrate that implementation of the
learning community professional development model may be
difficult and yet transformative in the professional lives of the
teachers, students, and administration involved in the change process.
I conclude by suggesting the need for a new model of professional
development that requires a transformative shift in power dynamics
and a shift in the view of what constitutes effective professional
learning.
Abstract: Multilobe bearings are found to be more stable than circular bearings. A three lobe bearing also possesses good stability characteristics. Sometimes the line of action of the load does not pass through the axis of a bearing and is shifted on either side by a few degrees. Load orientation is one of the factors that affect the stability of a three lobe bearing. The effect of load orientation on the stability of a three-lobe has been discussed in this paper. The results show that stability of a three-lobe bearing supporting either rigid or flexible rotor is increased for the positive values of load orientation i.e. when the load line is shifted in the opposite direction of rotation.