Abstract: This research work proposed a study of fruit bruise detection by means of a biospeckle method, selecting the papaya fruit (Carica papaya) as testing body. Papaya is recognized as a fruit of outstanding nutritional qualities, showing high vitamin A content, calcium, carbohydrates, exhibiting high popularity all over the world, considering consumption and acceptability. The commercialization of papaya faces special problems which are associated to bruise generation during harvesting, packing and transportation. Papaya is classified as climacteric fruit, permitting to be harvested before the maturation is completed. However, by one side bruise generation is partially controlled once the fruit flesh exhibits high mechanical firmness. By the other side, mechanical loads can set a future bruise at that maturation stage, when it can not be detected yet by conventional methods. Mechanical damages of fruit skin leave an entrance door to microorganisms and pathogens, which will cause severe losses of quality attributes. Traditional techniques of fruit quality inspection include total soluble solids determination, mechanical firmness tests, visual inspections, which would hardly meet required conditions for a fully automated process. However, the pertinent literature reveals a new method named biospeckle which is based on the laser reflectance and interference phenomenon. The laser biospeckle or dynamic speckle is quantified by means of the Moment of Inertia, named after its mechanical counterpart due to similarity between the defining formulae. Biospeckle techniques are able to quantify biological activities of living tissues, which has been applied to seed viability analysis, vegetable senescence and similar topics. Since the biospeckle techniques can monitor tissue physiology, it could also detect changes in the fruit caused by mechanical damages. The proposed technique holds non invasive character, being able to generate numerical results consistent with an adequate automation. The experimental tests associated to this research work included the selection of papaya fruit at different maturation stages which were submitted to artificial mechanical bruising tests. Damages were visually compared with the frequency maps yielded by the biospeckle technique. Results were considered in close agreement.
Abstract: K-Means (KM) is considered one of the major
algorithms widely used in clustering. However, it still has some
problems, and one of them is in its initialization step where it is
normally done randomly. Another problem for KM is that it
converges to local minima. Genetic algorithms are one of the
evolutionary algorithms inspired from nature and utilized in the field
of clustering. In this paper, we propose two algorithms to solve the
initialization problem, Genetic Algorithm Initializes KM (GAIK) and
KM Initializes Genetic Algorithm (KIGA). To show the effectiveness
and efficiency of our algorithms, a comparative study was done
among GAIK, KIGA, Genetic-based Clustering Algorithm (GCA),
and FCM [19].
Abstract: The Address Resolution Protocol (ARP) is used by
computers to map logical addresses (IP) to physical addresses
(MAC). However ARP is an all trusting protocol and is stateless
which makes it vulnerable to many ARP cache poisoning attacks
such as Man-in-the-Middle (MITM) and Denial of service (DoS)
attacks. These flaws result in security breaches thus weakening the
appeal of the computer for exchange of sensitive data. In this paper
we describe ARP, outline several possible ARP cache poisoning
attacks and give the detailed of some attack scenarios in network
having both wired and wireless hosts. We have analyzed each of
proposed solutions, identify their strengths and limitations. Finally
get that no solution offers a feasible solution. Hence, this paper
presents an efficient and secure version of ARP that is able to cope
up with all these types of attacks and is also a feasible solution. It is a
stateful protocol, by storing the information of the Request frame in
the ARP cache, to reduce the chances of various types of attacks in
ARP. It is more efficient and secure by broadcasting ARP Reply
frame in the network and storing related entries in the ARP cache
each time when communication take place.
Abstract: The paper applies a discourse analytical approach to investigate important concepts influencing the infrastructure planning process in the region of Scania in southern Sweden. Two discourses, one concerning regional development and one concerning sustainability are identified, discussed and contrasted. It is argued that the perceptions of problems and their suggested solutions related to transportation are based on specific ideas, in turn dependent on the importance given to certain concepts, such as regional enlargement, Scania as a transit region, the national environmental quality goals and regional attractiveness. These concepts, their underlying meaning structures and their relevance for the infrastructure planning process are analyzed. The handling of conflicting interests in the planning process, and the possible implications this may have is also discussed. The results indicate that the regional development discourse is dominant and although the solutions to the problems caused by transport are framed in similar ways in the two discourses a harmonization between conflicting goals is proving difficult to achieve.
Abstract: Geometric design is an important part of planning
process design for physical highway to fill up basic function of roads,
to give good traffic service. It is found that most of the road safety
problems occur at the horizontal curves and complex-compound
curves. In this paper, review on Sagarinn-Myinsain Portion of Nay
Pyi Taw - Mandalay highway has been conducted in aspect of
geometric design induced road safety condition. Horizontal
alignment of geometric features and curve details are reviewed based
on (AASHTO) standard and revised by Autodesk Land Desktop
Software. Moreover, 85th Percentile Operation Speeds (V85) with
driver confidence on horizontal curves is evaluated in order to obtain
the range of highway safety factor (FS). The length of the selected
highway portion is 13.65 miles and 8 lanes. The results of this study
can be used to investigate the possible hazardous locations in
advance and to revise how design radius and super elevation should
be for better road safety performance for the selected portion.
Moreover, the relationship between highway safety and highway
geometry characteristics can also be known.
Abstract: Locating the critical slip surface with the minimum factor of safety for a rock slope is a difficult problem. In recent years, some modern global optimization methods have been developed with success in treating various types of problems, but very few of such methods have been applied to rock mechanical problems. In this paper, use of hybrid model based on artificial immune system and cellular learning automata is proposed. The results show that the algorithm is an effective and efficient optimization method with a high level of confidence rate.
Abstract: An evolutionary computing technique for solving initial value problems in Ordinary Differential Equations is proposed in this paper. Neural network is used as a universal approximator while the adaptive parameters of neural networks are optimized by genetic algorithm. The solution is achieved on the continuous grid of time instead of discrete as in other numerical techniques. The comparison is carried out with classical numerical techniques and the solution is found with a uniform accuracy of MSE ≈ 10-9 .
Abstract: There have been numerous implementations of
security system using biometric, especially for identification and
verification cases. An example of pattern used in biometric is the iris
pattern in human eye. The iris pattern is considered unique for each
person. The use of iris pattern poses problems in encoding the human
iris.
In this research, an efficient iris recognition method is proposed.
In the proposed method the iris segmentation is based on the
observation that the pupil has lower intensity than the iris, and the
iris has lower intensity than the sclera. By detecting the boundary
between the pupil and the iris and the boundary between the iris and
the sclera, the iris area can be separated from pupil and sclera. A step
is taken to reduce the effect of eyelashes and specular reflection of
pupil. Then the four levels Coiflet wavelet transform is applied to the
extracted iris image. The modified Hamming distance is employed to
measure the similarity between two irises.
This research yields the identification success rate of 84.25% for
the CASIA version 1.0 database. The method gives an accuracy of
77.78% for the left eyes of MMU 1 database and 86.67% for the
right eyes. The time required for the encoding process, from the
segmentation until the iris code is generated, is 0.7096 seconds.
These results show that the accuracy and speed of the method is
better than many other methods.
Abstract: The rapid development of the BlackBerry games industry and its development goals were not just for entertainment, but also used for educational of students interactively. Unfortunately the development of adaptive educational games on BlackBerry in Indonesian language that interesting and entertaining for learning process is very limited. This paper shows the research of development of novel adaptive educational games for students who can adjust the difficulty level of games based on the ability of the user, so that it can motivate students to continue to play these games. We propose a method where these games can adjust the level of difficulty, based on the assessment of the results of previous problems using neural networks with three inputs in the form of percentage correct, the speed of answer and interest mode of games (animation / lessons) and 1 output. The experimental results are presented and show the adaptive games are running well on mobile devices based on BlackBerry platform
Abstract: Avionics software is safe-critical embedded software
and its architecture is evolving from traditional federated architectures
to Integrated Modular Avionics (IMA) to improve resource usability.
ARINC 653 (Avionics Application Standard Software Interface) is a
software specification for space and time partitioning in Safety-critical
avionics Real-time operating systems. Arinc653 uses two-level
scheduling strategies, but current modeling tools only apply to simple
problems of Arinc653 two-level scheduling, which only contain time
property. In avionics industry, we are always manually allocating
tasks and calculating the timing table of a real-time system to ensure
it-s running as we design. In this paper we represent an automatically
generating strategy which applies to the two scheduling problems with
dependent constraints in Arinc653 partition run-time environment. It
provides the functionality of automatic generation from the task and partition models to scheduling policy through allocating the tasks to the partitions while following the constraints, and then we design a simulating mechanism to check whether our policy is schedulable or
not
Abstract: It is important to retain customer satisfaction in
information technology services. When a service failure occurs,
companies need to take service recovery action to recover their
customer satisfaction. Although companies cannot avoid all problems
and complaints, they should try to make up. Therefore, service failure
and service recovery have become an important and challenging issue
for companies. In this paper, the literature and the problems in the
information technology services were reviewed. An integrated model
of profit driven for the service failure and service recovery was
established in view of the benefit of customer and enterprise.
Moreover, the interaction between service failure and service recovery
strategy was studied, the result of which verified the matching
principles of the service recovery strategy and the type of service
failure. In addition, the relationship between the cost of service
recovery and customer-s cumulative value of service after recovery
was analyzed with the model. The result attributes to managers in
deciding on appropriate resource allocations for recovery strategies.
Abstract: Temperature is one of the most principle factors affects aquaculture system. It can cause stress and mortality or superior environment for growth and reproduction. This paper presents the control of pond water temperature using artificial intelligence technique. The water temperature is very important parameter for shrimp growth. The required temperature for optimal growth is 34oC, if temperature increase up to 38oC it cause death of the shrimp, so it is important to control water temperature. Solar thermal water heating system is designed to supply an aquaculture pond with the required hot water in Mersa Matruh in Egypt. Neural networks are massively parallel processors that have the ability to learn patterns through a training experience. Because of this feature, they are often well suited for modeling complex and non-linear processes such as those commonly found in the heating system. Artificial neural network is proposed to control water temperature due to Artificial intelligence (AI) techniques are becoming useful as alternate approaches to conventional techniques. They have been used to solve complicated practical problems. Moreover this paper introduces a complete mathematical modeling and MATLAB SIMULINK model for the aquaculture system. The simulation results indicate that, the control unit success in keeping water temperature constant at the desired temperature by controlling the hot water flow rate.
Abstract: Nowadays, fluidized bed plays an important part in industry. The design of this kind of reactor requires knowing the interfacial area between two phases and this interfacial area leads to calculate the solid holdup in the bed. Consequently achieving interfacial area between gas and solid in the bed experimentally is so significant. On interfacial area measurement in fluidized bed with gas has been worked, but light transmission technique has been used less. Therefore, in the current research the possibility of using of this technique and its accuracy are investigated. Measuring, a fluidized bed was designed and the problems were averted as far as possible. By using fine solid with equal shape and diameter and installing an optical system, the absorption of light during the time of fluidization has been measured. Results indicate that this method that its validity has been proved in the gas-liquid system, by different reasons have less application in gas-solid system. One important reason could be non-uniformity in such systems.
Abstract: One of the major problems in liberalized power
markets is loss allocation. In this paper, a different method for
allocating transmission losses to pool market participants is
proposed. The proposed method is fundamentally based on
decomposition of loss function and current projection concept. The
method has been implemented and tested on several networks and
one sample summarized in the paper. The results show that the
method is comprehensive and fair to allocating the energy losses of a
power market to its participants.
Abstract: The problems associated with wind predictions of
WAsP model in complex terrain are already the target of several
studies in the last decade. In this paper, the influence of surrounding
orography on accuracy of wind data analysis of a train is
investigated. For the case study, a site with complex surrounding
orography is considered. This site is located in Manjil, one of the
windiest cities of Iran. For having precise evaluation of wind regime
in the site, one-year wind data measurements from two metrological
masts are used. To validate the obtained results from WAsP, the
cross prediction between each mast is performed. The analysis
reveals that WAsP model can estimate the wind speed behavior
accurately. In addition, results show that this software can be used
for predicting the wind regime in flat sites with complex surrounding
orography.
Abstract: The spectral action balance equation is an equation that
used to simulate short-crested wind-generated waves in shallow water
areas such as coastal regions and inland waters. This equation consists
of two spatial dimensions, wave direction, and wave frequency which
can be solved by finite difference method. When this equation with
dominating convection term are discretized using central differences,
stability problems occur when the grid spacing is chosen too coarse.
In this paper, we introduce the splitting upwind schemes for avoiding
stability problems and prove that it is consistent to the upwind scheme
with same accuracy. The splitting upwind schemes was adopted
to split the wave spectral action balance equation into four onedimensional
problems, which for each small problem obtains the
independently tridiagonal linear systems. For each smaller system
can be solved by direct or iterative methods at the same time which
is very fast when performed by a multi-processor computer.
Abstract: Microarrays have become the effective, broadly used tools in biological and medical research to address a wide range of problems, including classification of disease subtypes and tumors. Many statistical methods are available for analyzing and systematizing these complex data into meaningful information, and one of the main goals in analyzing gene expression data is the detection of samples or genes with similar expression patterns. In this paper, we express and compare the performance of several clustering methods based on data preprocessing including strategies of normalization or noise clearness. We also evaluate each of these clustering methods with validation measures for both simulated data and real gene expression data. Consequently, clustering methods which are common used in microarray data analysis are affected by normalization and degree of noise and clearness for datasets.
Abstract: One of the mayor problems of programming a cruise
circuit is to decide which destinations to include and which don-t.
Thus a decision problem emerges, that might be solved using a linear
and goal programming approach. The problem becomes more
complex if several boats in the fleet must be programmed in a limited
schedule, trying their capacity matches best a seasonal demand and
also attempting to minimize the operation costs. Moreover, the
programmer of the company should consider the time of the
passenger as a limited asset, and would like to maximize its usage.
The aim of this work is to design a method in which, using linear and
goal programming techniques, a model to design circuits for the
cruise company decision maker can achieve an optimal solution
within the fleet schedule.
Abstract: In this research, we have developed a new efficient
heuristic algorithm for the dynamic facility layout problem with
budget constraint (DFLPB). This heuristic algorithm combines two
mathematical programming methods such as discrete event
simulation and linear integer programming (IP) to obtain a near
optimum solution. In the proposed algorithm, the non-linear model
of the DFLP has been changed to a pure integer programming (PIP)
model. Then, the optimal solution of the PIP model has been used in
a simulation model that has been designed in a similar manner as the
DFLP for determining the probability of assigning a facility to a
location. After a sufficient number of runs, the simulation model
obtains near optimum solutions. Finally, to verify the performance of
the algorithm, several test problems have been solved. The results
show that the proposed algorithm is more efficient in terms of speed
and accuracy than other heuristic algorithms presented in previous
works found in the literature.
Abstract: In this paper, the transformers over-load problem of Shiraz substation in Fars Regional Electric Company (FREC) is investigated for a period of three years plan. So the suggestions for using phase shifting transformer (PST) and unified power flow controller (UPFC) in order to solve this problem are examined in details and finally, some economical and practical designs will be given in order to solve the related problems. Practical consideration and using the basic and fundamental concept of powers in transmission lines in order to find the economical design are the main advantages of this research. The simulation results of the integrated overall system with different designs compare them base on economical and practical aspects to solve the over-load and loss-reduction.