Abstract: In this article, models based on quantitative analysis,
physical geometry and regression analysis are established, by using
analytic hierarchy process analysis, fuzzy cluster analysis, fuzzy
photographic and data fitting. The reasons of various leaf shapes
among different species and the differences between the leaf shapes on
same tree have been solved by using software, such as Eviews, VB and
Matlab. We also successfully estimate the leaf mass of a tree and the
correlation with the tree profile.
Abstract: Creative drama which interconnects with the concepts of play, theatre, animation and role playing is a field which can only be learnt and expressed through experiencing. This study about assessment of the drama teaching in preschools by children was conducted in 3 preschools in Ankara with participation of 12 children of 6 ages who had taken drama learning courses. Qualitative research approach and semi-structured interviewing technique were employed. The results of the study indicated that all of 12 children defined drama as a game and entertainment.
Abstract: In recent years, strategic alliances have taken
increasing importance as a means to control competitive forces and to
enter into new markets. Joint ventures are one of the most frequently
used contractual forms in strategic alliances. There are various
motivations for cooperation between two or more firms e.g.,
accessing to technical know-how, accessing to financial resources
and managing risks. The firms must know about these motivations to
encourage for establishing joint venture. So, it is important for
managers to understand about these motives. On the other hand, the
cooperation section is one of the most effective parts in each country.
In this way, our study identifies goals of joint venture between
cooperative manufacturing firms, and prioritizes those using
TOPSIS1. The results show that the most important of joint venture
goals are: accessing to managerial know-how, sharing total capital
investment.
Abstract: This article deals with the numerical simulation of the
floor heating convector in 3D. Presented convector can operate in
two modes – cooling mode and heating mode. This initial numerical
simulation is focused on cooling mode of the convector. Models with
different temperature of the fins are compared and three various
shapes of the fins are examined as well. The objective of the work is
to predict air flow and heat transfer inside convector for further
optimalization of these devices. For the numerical simulation was
used commercial software Ansys Fluent.
Abstract: The study was designed to evaluate the use of low
concentrations of separan flocculent (Less than 3 ppm) on
physicochemical properties of sugar cane juice. Colour, pH, purity,
turbidity, pol, brix, reducing sugars tannins and polyphenols of
crushed cane (green and burned) juice, mixed juice and clarified
juice were studied. The results showed that pol, brix, reducing sugar
and turbidity are higher in crushed cane juice. Clarified burned juice
had low turbidity, reducing sugars, pol and brix but had significantly
lower pH, purity and colour when compared to crushed juice.
Polyphenols of the crushed juice (1.19%) decreased significantly in
the clarified juice to 0.006%. Addition of separan at a concentration
of 0.015 ppm reduced significantly colour, polyphenols and tannins
and reducing sugar compared to the control.
Abstract: The paper presents a novel method for the 3D shaping
of different materials using a high-pressure abrasive water jet and a
flat target image. For steering movement process of the jet a principle
similar to raster image way of record and readout was used.
However, respective colors of pixel of such a bitmap are connected
with adequate jet feed rate that causes erosion of material with
adequate depth. Thanks to that innovation, one can observe spatial
imaging of the object. Theoretical basis as well as spatial model of
material shaping and experimental stand including steering program
are presented in. There are also presented methodic and some
experimental erosion results as well as practical example of object-s
bas-relief made of metal.
Abstract: Globin superfamily proteins including myoglobin and
hemoglobin, have welcome new members recently, namely,
cytoglobin, neuroglobin and globin X, though their physiological
functions are still to be addressed. Fish are the excellent models for the
study of these globins, but their characteristics have not yet been
discussed to date. In the present study, attempts have been made to
characterize their structural uniqueness by making use of proteomics
approach. This is the first comparative study on the characterization of
globin superfamily proteins from fish.
Abstract: Aggression is a behavior that cannot be approved by
the society. Vandalism which is aggression towards objects is an
action that tends to damage public or personal property. The
behaviors that are described as vandalism can often be observed in
the schools as well. According to Zwier and Vaughan (1)
previous research about the reasons of and precautionary measures
for vandalism in schools can be grouped in three tendency categories:
conservative, liberal and radical. In this context, the main aim of this
study is to discover which ideological tendency of the reasons of
school vandalism is adopted by the teachers and what are their
physical, environmental, school system and societal solutions for
vandalism. A total of 200 teachers participated in this study, and the
mean age was 34.20 years (SD = 6.54). The sample was made up of
109 females and 91 males. For the analysis of the data, SPSS 15.00,
frequency, percentage, and t-test were used. The research showed
that the teachers have tendencies in the order of conservative, liberal
and radical for the reasons of vandalism. The research also showed
that the teachers do not have any tendency for eliminating vandalism
physically and general solutions on the level of society; on the other
hand they mostly adopt a conservative tendency in terms of
precautions against vandalism in the school system. Second most,
they adopt the liberal tendency in terms of precautions against
vandalism in the school system. . It is observed that the findings of
this study are comparable to the existing literature on the subject.
Future studies should be conducted with multiple variants and
bigger sampling.
Abstract: We present here the results for a comparative study of
some techniques, available in the literature, related to the relevance
feedback mechanism in the case of a short-term learning. Only one
method among those considered here is belonging to the data mining
field which is the K-nearest neighbors algorithm (KNN) while the
rest of the methods is related purely to the information retrieval field
and they fall under the purview of the following three major axes:
Shifting query, Feature Weighting and the optimization of the
parameters of similarity metric. As a contribution, and in addition to
the comparative purpose, we propose a new version of the KNN
algorithm referred to as an incremental KNN which is distinct from
the original version in the sense that besides the influence of the
seeds, the rate of the actual target image is influenced also by the
images already rated. The results presented here have been obtained
after experiments conducted on the Wang database for one iteration
and utilizing color moments on the RGB space. This compact
descriptor, Color Moments, is adequate for the efficiency purposes
needed in the case of interactive systems. The results obtained allow
us to claim that the proposed algorithm proves good results; it even
outperforms a wide range of techniques available in the literature.
Abstract: Fuzzy logic approach is used in this study to predict
the tractive performance in terms of traction force, and motion
resistance for an intelligent air cushion track vehicle while it operates
in the swamp peat. The system is effective to control the intelligent
air –cushion system with measuring the vehicle traction force (TF),
motion resistance (MR), cushion clearance height (CH) and cushion
pressure (CP). Sinkage measuring sensor, magnetic switch, pressure
sensor, micro controller, control valves and battery are incorporated
with the Fuzzy logic system (FLS) to investigate experimentally the
TF, MR, CH, and CP. In this study, a comparison for tractive
performance of an intelligent air cushion track vehicle has been
performed with the results obtained from the predicted values of FLS
and experimental actual values. The mean relative error of actual and
predicted values from the FLS model on traction force, and total
motion resistance are found as 5.58 %, and 6.78 % respectively. For
all parameters, the relative error of predicted values are found to be
less than the acceptable limits. The goodness of fit of the prediction
values from the FLS model on TF, and MR are found as 0.90, and
0.98 respectively.
Abstract: Later marine propeller is the main component of ship
propulsion system. For a non-series propeller, it is difficult to
indicate the open water marine propeller performance without an
experimental study to measure the marine propeller parameters.
In the present study, the open water performance of a non-series
marine propeller has been carried out experimentally. The
geometrical aspects of a commercial non-series marine propeller
have been measured for a propeller blade area ratio of 0.3985. The
measured propeller performance parameters were the thrust and
torque coefficients for different propeller rotational speed and
different water channel flow velocity, then the open water
performance for the propeller has been plotted.
In addition, a direct comparison between the obtained
experimental results and a theoretical study of a B-series marine
propeller of the same blade area ratio has been carried out. A
correction factor has been introduced to apply the operating
conditions of the experimental results to that of the theoretical study
for the studied marine propeller.
Abstract: Implemented 5-bit 125-MS/s successive
approximation register (SAR) analog to digital converter (ADC) on
FPGA is presented in this paper.The design and modeling of a high
performance SAR analog to digital converter are based on monotonic
capacitor switching procedure algorithm .Spartan 3 FPGA is chosen
for implementing SAR analog to digital converter algorithm. SAR
VHDL program writes in Xilinx and modelsim uses for showing
results.
Abstract: Run-offs are considered as important hydrological factors in feasibility studies of river engineering and irrigation-related projects under arid and semi-arid condition. Flood control is one of the crucial factor, the management of which while mitigates its destructive consequences, abstracts considerable volume of renewable water resources. The methodology applied here was based on Mizumura, which applied a mathematical model for simple tank to simulate the rainfall-run-off process in a particular water basin using the data from the observational hydrograph. The model was applied in the Dez River water basin adjacent to Greater Dezful region, Iran in order to simulate and estimate the floods. Results indicated that the calculated hydrographs using the simple tank method, SCS-CN model and the observation hydrographs had a close proximity. It was also found that on average the flood time and discharge peaks in the simple tank were closer to the observational data than the CN method. On the other hand, the calculated flood volume in the CN model was significantly closer to the observational data than the simple tank model.
Abstract: We investigate the ZnO role in the inherent protection
of old manuscripts to protect them against environmental damaging
effect of ultraviolet radiation, pollutant gasses, mold and bacteria. In
this study a cellulosic nanocomposite of ZnO were used as protective
coating on the surface of paper fibers. This layered nanocomposite
can act as a consolidate materials too. Furthermore, to determine how
well paper works screen objects from the damaging effects, two
accelerated aging mechanisms due to light and heat are discussed.
Results show good stability of papers with nanocomposite coating.
Also, a good light stability was shown in the colored paper that
treated with this nanocomposite. Furthermore, to demonstrate the
degree of antifungal and antibacterial properties of coated papers,
papers was treated with four common molds and bacteria and the
good preventive effects of coated paper against molds and bacteria
are described.
Abstract: Recently, a great number of theoretical frameworks
have been proposed to develop the linkages between knowledge
management (KM) and organizational strategies. However, while
there has been much theorizing and case study in the area, validated
research models integrating KM and information technology
strategies for empirical testing of these theories have been scarce. In
this research, we try to develop a research model for explaining the
relationship between KM strategy and IT strategy and their effects on
performance. Finally, meaningful propositions and conclusions are
derived, and suggestions for future research are proposed and
discussed.
Abstract: An iterative algorithm is proposed and tested in Cournot Game models, which is based on the convergence of sequential best responses and the utilization of a genetic algorithm for determining each player-s best response to a given strategy profile of its opponents. An extra outer loop is used, to address the problem of finite accuracy, which is inherent in genetic algorithms, since the set of feasible values in such an algorithm is finite. The algorithm is tested in five Cournot models, three of which have convergent best replies sequence, one with divergent sequential best replies and one with “local NE traps"[14], where classical local search algorithms fail to identify the Nash Equilibrium. After a series of simulations, we conclude that the algorithm proposed converges to the Nash Equilibrium, with any level of accuracy needed, in all but the case where the sequential best replies process diverges.
Abstract: This paper presents the stabilization potential of Class
F pond ash (PA) from a coal fired thermal power station on tropical
peat soil. Peat or highly organic soils are well known for their high
compressibility, natural moisture content, low shear strength and
long-term settlement. This study investigates the effect of different
amount (i.e., 5, 10, 15 and 20%) of PA on peat soil, collected from
Sarawak, Malaysia, mainly compaction and unconfined compressive
strength (UCS) properties. The amounts of PA added to the peat soil
sample as percentage of the dry peat soil mass. With the increase in
PA content, the maximum dry density (MDD) of peat soil increases,
while the optimum moisture content (OMC) decreases. The UCS
value of the peat soils increases significantly with the increase of PA
content and also with curing periods. This improvement on
compressive strength of tropical peat soils indicates that PA has the
potential to be used as a stabilizer for tropical peat soil. Also, the use
of PA in soil stabilization helps in reducing the pond volume and
achieving environment friendly as well as a sustainable development
of natural resources.
Abstract: Aggression is a multi- factorial concept and multilevel
in nature. The Young Adolescent is being influenced by family,
school and community. This paper is aimed to determine the
following: aggression level among young adolescents, difference of
level of aggression on school and year levels and to determine the
correlates of aggression. There were 142 high school students from
two different national highs schools (Region 3 and National Capital
Region).Convenience sampling was use in this study. The following
measures were used namely: Aggression Scale, Parental Support
Fighting Scale, Positive Behavior Scale and Exposure to Violence
and Trauma questionnaire. There was no significant difference in
aggression level among different year level and schools. The
findings of the study suggested that high level of community violence
and having low parental support for non-aggressive behavior
contribute to the prediction of aggression.
Abstract: New advancement of technology and never satisfying demands of the civilization are putting huge pressure on the natural fuel resources and these resources are at a constant threat to its sustainability. To get the best out of the automobile, the optimum balance between performance and fuel economy is important. In the present state of art, either of the above two aspects are taken into mind while designing and development process which puts the other in the loss as increase in fuel economy leads to decrement in performance and vice-versa. In-depth observation of the vehicle dynamics apparently shows that large amount of energy is lost during braking and likewise large amount of fuel is consumed to reclaim the initial state, this leads to lower fuel efficiency to gain the same performance. Current use of Kinetic Energy Recovery System is only limited to sports vehicles only because of the higher cost of this system. They are also temporary in nature as power can be squeezed only during a small time duration and use of superior parts leads to high cost, which results on concentration on performance only and neglecting the fuel economy. In this paper Kinetic Energy Recovery System for storing the power and then using the same while accelerating has been discussed. The major storing element in this system is a Flat Spiral Spring that will store energy by compression and torsion.
The use of spring ensure the permanent storage of energy until used by the driver unlike present mechanical regeneration system in which the energy stored decreases with time and is eventually lost. A combination of internal gears and spur gears will be used in order to make the energy release uniform which will lead to safe usage. The system can be used to improve the fuel efficiency by assisting in overcoming the vehicle’s inertia after braking or to provide instant acceleration whenever required by the driver. The performance characteristics of the system including response time, mechanical efficiency and overall increase in efficiency are demonstrated. This technology makes the KERS (Kinetic Energy Recovery System) more flexible and economical allowing specific application while at the same time increasing the time frame and ease of usage.
Abstract: Curing of paints by exposure to UV radiations is
emerging as one of the best film forming technique as an alternative
to traditional solvent borne oxidative and thermal curing coatings.
The composition and chemistry of UV curable coatings and role of
multifunctional and monofunctional monomers, oligomers, and
photoinitiators have been discussed. The limitations imposed by
thermodynamic equilibrium and tendency for acrylic double bond
polymerizations during synthesis of multifunctional acrylates have
been presented. Aim of present investigation was thus to explore the
reaction variables associated with synthesis of multifunctional
acrylates. Zirconium oxychloride was evaluated as catalyst against
regular acid functional catalyst. The catalyzed synthesis of glyceryl
acrylate and neopentyl glycol acrylate was conducted by variation of
following reaction parameters: two different reactant molar ratios-
1:4 and 1:6; catalyst usage in % by moles on polyol- 2.5, 5.0 and 7.5
and two different reaction temperatures- 45 and 75 0C. The reaction
was monitored by determination of acid value and hydroxy value at
regular intervals, besides TLC, HPLC, and FTIR analysis of
intermediates and products. On the basis of determination of reaction
progress over 1-60 hrs, the esterification reaction was observed to
follow 2nd order kinetics with rate constant varying from 1*10-4 to
7*10-4. The thermal and catalytic components of second order rate
constant and energy of activation were also determined. Uses of
these kinetic and thermodynamic parameters in design of reactor for
manufacture of multifunctional acrylate ester have been presented.
The synthesized multifunctional acrylates were used to formulate and
apply UV curable clear coat followed by determination of curing
characteristics and mechanical properties of cured film. The overall
curing rates less than 05 min. were easily attained indicating
economical viability of radiation curable system due to faster
production schedules