Abstract: Optical properties of sputter-deposited ZnS thin films
were investigated as potential replacements for CBD(chemical bath
deposition) CdS buffer layers in the application of CIGS solar cells.
ZnS thin films were fabricated on glass substrates at RT, 150oC, 200oC,
and 250oC with 50 sccm Ar gas using an RF magnetron sputtering
system. The crystal structure of the thin film is found to be zinc blende
(cubic) structure. Lattice parameter of ZnS is slightly larger than CdS
on the plane and thus better matched with that of CIGS. Within a
400-800 nm wavelength region, the average transmittance was larger
than 75%. When the deposition temperature of the thin film was
increased, the blue shift phenomenon was enhanced. Band gap energy
of the ZnS thin film tended to increase as the deposition temperature
increased. ZnS thin film is a promising material system for the CIGS
buffer layer, in terms of ease of processing, low cost, environmental
friendliness, higher transparency, and electrical properties
Abstract: During recent years, the traditional learning
approaches have undergone fundamental changes due to the
emergence of new technologies such as multimedia, hypermedia and
telecommunication. E-learning is a modern world phenomenon that
has come into existence in the information age and in a knowledgebased
society. E-learning has developed significantly within a short
period of time. Thus it is of a great significant to secure information,
allow a confident access and prevent unauthorized accesses. Making
use of individuals- physiologic or behavioral (biometric) properties is
a confident method to make the information secure. Among the
biometrics, fingerprint is more acceptable and most countries use it as
an efficient methods of identification. This article provides a new
method to compare the fingerprint comparison by pattern recognition
and image processing techniques. To verify fingerprint, the shortest
distance method is used together with perceptronic multilayer neural
network functioning based on minutiae. This method is highly
accurate in the extraction of minutiae and it accelerates comparisons
due to elimination of false minutiae and is more reliable compared
with methods that merely use directional images.
Abstract: Impact is one of very important subjects which always have been considered in mechanical science. Nature of impact is such that which makes its control a hard task. Therefore it is required to present the transfer of impact to other vulnerable part of a structure, when it is necessary, one of the best method of absorbing energy of impact, is by using Thin-walled tubes these tubes collapses under impact and with absorption of energy, it prevents the damage to other parts.Purpose of recent study is to survey the deformation and energy absorption of tubes with different type of cross section (rectangular or square) and with similar volumes, height, mean cross section thickness, and material under loading with different speeds. Lateral loading of tubes are quasi-static type and beside as numerical analysis, also experimental experiences has been performed to evaluate the accuracy of the results. Results from the surveys is indicates that in a same conditions which mentioned above, samples with square cross section ,absorb more energy compare to rectangular cross section, and also by increscent in speed of loading, energy absorption would be more.
Abstract: Abdominal aortic aneurysms rupture (AAAs) is one of the main causes of death in the world. This is a very complex phenomenon that usually occurs “without previous warning". Currently, criteria to assess the aneurysm rupture risk (peak diameter and growth rate) can not be considered as reliable indicators. In a first approach, the main geometric parameters of aneurysms have been linked into five biomechanical factors. These are combined to obtain a dimensionless rupture risk index, RI(t), which has been validated preliminarily with a clinical case and others from literature. This quantitative indicator is easy to understand, it allows estimating the aneurysms rupture risks and it is expected to be able to identify the one in aneurysm whose peak diameter is less than the threshold value. Based on initial results, a broader study has begun with twelve patients from the Clinic Hospital of Valladolid-Spain, which are submitted to periodic follow-up examinations.
Abstract: Mycotoxin (aflatoxins) contamination of peanuts is a
great concern for human health. A total of 72 samples of unripe,
roasted, and salty peanuts were collected randomly from Pothohar
plateau of Pakistan for the assessment of aflatoxin. Samples were
dried, ground and extracted by acetonitrile (84%). The filtered
extracts were cleaned up by MycoSep-226 and analyzed by high
performance liquid chromatography with flourescence detector.
Quantification limit of Aflatoxin was 1 μg/kg and 70% Recovery was
observed in spiked samples in the range 1–10 μg/kg. The screening
of mycotoxins indicated that aflatoxins were present in most of the
samples being detected in 82%, in concentrations from 14.25 μg/kg
to 98.80 μg/kg. Optimal conditions for mycotoxin production and
fungal growth are frequently found in the crop fields as well as in
store houses. Human exposure of such toxin can be controlled by
pointed out such awareness and implemented the regulations.
Abstract: We prove detailed analysis of a waveguide-based Schottky barrier photodetector (SBPD) where a thin silicide film is put on the top of a silicon-on-insulator (SOI) channel waveguide to absorb light propagating along the waveguide. Taking both the confinement factor of light absorption and the wall scanning induced gain of the photoexcited carriers into account, an optimized silicide thickness is extracted to maximize the effective gain, thereby the responsivity. For typical lengths of the thin silicide film (10-20 Ðçm), the optimized thickness is estimated to be in the range of 1-2 nm, and only about 50-80% light power is absorbed to reach the maximum responsivity. Resonant waveguide-based SBPDs are proposed, which consist of a microloop, microdisc, or microring waveguide structure to allow light multiply propagating along the circular Si waveguide beneath the thin silicide film. Simulation results suggest that such resonant waveguide-based SBPDs have much higher repsonsivity at the resonant wavelengths as compared to the straight waveguidebased detectors. Some experimental results about Si waveguide-based SBPD are also reported.
Abstract: The procurement and cost management approach adopted for mechanical and electrical (M&E) services in Malaysian construction industry have been criticized for its inefficiency. The study examined early cost estimating practices adopted for mechanical and electrical services (M&E) in Malaysia so as to understand the level of compliance of the current techniques with best practices. The methodology adopted for the study is a review of bidding documents used on both completed and on – going building projects awarded between 2008 – 2010 under 9th Malaysian Plan. The analysis revealed that, M&E services cost cannot be reliably estimated at pre-contract stage; the bidding techniques adopted for M&E services failed to provide uniform basis for contractors to submit tender; detailed measurement of items were not made which could complicate post contract cost control and financial management. The paper concluded that, there is need to follow a structured approach in determining the pre-contract cost estimate for M&E services which will serve as a virile tool for post contract cost control.
Abstract: Fundamental sensor-motor couplings form the backbone
of most mobile robot control tasks, and often need to be implemented
fast, efficiently and nevertheless reliably. Machine learning
techniques are therefore often used to obtain the desired sensor-motor
competences.
In this paper we present an alternative to established machine
learning methods such as artificial neural networks, that is very fast,
easy to implement, and has the distinct advantage that it generates
transparent, analysable sensor-motor couplings: system identification
through nonlinear polynomial mapping.
This work, which is part of the RobotMODIC project at the
universities of Essex and Sheffield, aims to develop a theoretical understanding
of the interaction between the robot and its environment.
One of the purposes of this research is to enable the principled design
of robot control programs.
As a first step towards this aim we model the behaviour of the
robot, as this emerges from its interaction with the environment, with
the NARMAX modelling method (Nonlinear, Auto-Regressive, Moving
Average models with eXogenous inputs). This method produces
explicit polynomial functions that can be subsequently analysed using
established mathematical methods.
In this paper we demonstrate the fidelity of the obtained NARMAX
models in the challenging task of robot route learning; we present a
set of experiments in which a Magellan Pro mobile robot was taught
to follow four different routes, always using the same mechanism to
obtain the required control law.
Abstract: Concerning the measurement of friction properties of
textiles and fabrics using Kawabata Evaluation System (KES), whose
output is constrained to the surface friction factor of fabric, and no
other data would be generated; this research has been conducted to
gain information about surface roughness regarding its surface
friction factor. To assess roughness properties of light nonwovens, a
3-dimensional model of a surface has been simulated with regular
sinuous waves through it as an ideal surface. A new factor was
defined, namely Surface Roughness Factor, through comparing
roughness properties of simulated surface and real specimens. The
relation between the proposed factor and friction factor of specimens
has been analyzed by regression, and results showed a meaningful
correlation between them. It can be inferred that the new presented
factor can be used as an acceptable criterion for evaluating the
roughness properties of light nonwoven fabrics.
Abstract: This paper describes a proposed support system which
enables applications designers to effectively create VR applications
using multiple haptic APIs. When the VR designers create
applications, it is often difficult to handle and understand many
parameters and functions that have to be set in the application program
using documentation manuals only. This complication may disrupt
creative imagination and result in inefficient coding. So, we proposed
the support application which improved the efficiency of VR
applications development and provided the interactive components of
confirmation of operations with haptic sense previously.
In this paper, we describe improvements of our former proposed
support application, which was applicable to multiple APIs and haptic
devices, and evaluate the new application by having participants
complete VR program. Results from a preliminary experiment suggest
that our application facilitates creation of VR applications.
Abstract: The objective of this research was to identify the
vegetation-soil relationships in Nodushan arid rangelands of Yazd. 5
sites were selected for measuring the cover of plant species and soil
attributes. Soil samples were taken in 0-10 and 10-80 cm layers. The
species studied were Salsola tomentosa, Salsola arbuscula, Peganum
harmala, Zygophylum eurypterum and Eurotia ceratoides. Canonical
correspondence analysis (CCA) was used to analyze the data. Based
on the CCA results, 74.9 % of vegetation-soil variation was explained
by axis 1-3. Axis 1, 2 and 3 accounted for 27.2%, 24.9 % and 22.8%
of variance respectively. Correlation between axis 1, 2, 3 and speciesedaphic
variables were 0.995, 0.989, 0.981 respectively. Soil texture,
lime, salinity and organic matter significantly influenced the
distribution of these plant species. Determination of soil-vegetation
relationships will be useful for managing and improving rangelands
in arid and semi arid environments.
Abstract: In this paper is described a new conception of the
Cartesian robot for automated assembly and also disassembly
process. The advantage of this conception is the utilization the
Cartesian assembly robot with its all peripheral automated devices for
assembly of the assembled product. The assembly product in the end
of the lifecycle can be disassembled with the same Cartesian
disassembly robot with the use of the same peripheral automated
devices and equipment. It is a new approach to problematic solving
and development of the automated assembly systems with respect to
lifecycle management of the assembly product and also assembly
system with Cartesian robot. It is also important to develop the
methodical process for design of automated assembly and
disassembly system with Cartesian robot. Assembly and disassembly
system use the same Cartesian robot input and output devices,
assembly and disassembly units in one workplace with different
application. Result of design methodology is the verification and
proposition of real automated assembly and disassembly workplace
with Cartesian robot for known verified model of assembled actuator.
Abstract: In this paper, image compression using hybrid vector
quantization scheme such as Multistage Vector Quantization
(MSVQ) and Pyramid Vector Quantization (PVQ) are introduced. A
combined MSVQ and PVQ are utilized to take advantages provided
by both of them. In the wavelet decomposition of the image, most of
the information often resides in the lowest frequency subband.
MSVQ is applied to significant low frequency coefficients. PVQ is
utilized to quantize the coefficients of other high frequency
subbands. The wavelet coefficients are derived using lifting scheme.
The main aim of the proposed scheme is to achieve high compression
ratio without much compromise in the image quality. The results are
compared with the existing image compression scheme using MSVQ.
Abstract: The segmentation of mouth and lips is a fundamental
problem in facial image analyisis. In this paper we propose a method
for lip segmentation based on rg-color histogram. Statistical analysis
shows, using the rg-color-space is optimal for this purpose of a pure
color based segmentation. Initially a rough adaptive threshold selects
a histogram region, that assures that all pixels in that region are
skin pixels. Based on that pixels we build a gaussian model which
represents the skin pixels distribution and is utilized to obtain a
refined, optimal threshold. We are not incorporating shape or edge
information. In experiments we show the performance of our lip pixel
segmentation method compared to the ground truth of our dataset and
a conventional watershed algorithm.
Abstract: The objective from this paper is to design a solar
thermal engine for space vehicles orbital control and electricity
generation. A computational model is developed for the prediction of
the solar thermal engine performance for different design parameters and conditions in order to enhance the engine efficiency. The engine is divided into two main subsystems. First, the concentrator dish
which receives solar energy from the sun and reflects them to the
cavity receiver. The second one is the cavity receiver which receives
the heat flux reflected from the concentrator and transfers heat to the
fluid passing over. Other subsystems depend on the application required from the engine. For thrust application, a nozzle is
introduced to the system for the fluid to expand and produce thrust.
Hydrogen is preferred as a working fluid in the thruster application.
Results model developed is used to determine the thrust for a
concentrator dish 4 meters in diameter (provides 10 kW of energy),
focusing solar energy to a 10 cm aperture diameter cavity receiver.
The cavity receiver outer length is 50 cm and the internal cavity is 47
cm in length. The suggested design material of the internal cavity is
tungsten to withstand high temperature. The thermal model and
analysis shows that the hydrogen temperature at the plenum reaches
2000oK after about 250 seconds for hot start operation for a flow rate
of 0.1 g/sec.Using solar thermal engine as an electricity generation
device on earth is also discussed. In this case a compressor and
turbine are used to convert the heat gained by the working fluid (air)
into mechanical power. This mechanical power can be converted into
electrical power by using a generator.
Abstract: This study shows palynomorphological description of
pollen grains of Lamium garganicum, species of the family Labiatae.
Fresh material of this plant is taken in Mount Llogara, in Albania. By
comparison made between palinomorphological characteristics of
pollen grains of Lamium garganicum with those of Lamium
maculatum and Lamium purpureum, showed that granules have
similarities in the number of furrows. The pollen grains of Lamium
garganicum were larger in length and width than those of Lamium
maculatum and almost equal with those of Lamium purpureum.
Furrows are longer than those of pollen grains in Lamium maculatum
and shorter than those of Lamium purpureum. The layer of exine of
Lamium garganicum was thinner than that of two others. The
sculpture of exine was fine reticulate, where reticulas were uniform
whereas in Lamium purpureum was verrucate, with small verrucae; in
Lamium maculatum was reticulate.
Abstract: In this work, the primary compressive strength
components of human femur trabecular bone are qualitatively
assessed using image processing and wavelet analysis. The Primary
Compressive (PC) component in planar radiographic femur trabecular
images (N=50) is delineated by semi-automatic image processing
procedure. Auto threshold binarization algorithm is employed to
recognize the presence of mineralization in the digitized images. The
qualitative parameters such as apparent mineralization and total area
associated with the PC region are derived for normal and abnormal
images.The two-dimensional discrete wavelet transforms are utilized
to obtain appropriate features that quantify texture changes in medical
images .The normal and abnormal samples of the human femur are
comprehensively analyzed using Harr wavelet.The six statistical
parameters such as mean, median, mode, standard deviation, mean
absolute deviation and median absolute deviation are derived at level
4 decomposition for both approximation and horizontal wavelet
coefficients. The correlation coefficient of various wavelet derived
parameters with normal and abnormal for both approximated and
horizontal coefficients are estimated. It is seen that in almost all cases
the abnormal show higher degree of correlation than normals. Further
the parameters derived from approximation coefficient show more
correlation than those derived from the horizontal coefficients. The
parameters mean and median computed at the output of level 4 Harr
wavelet channel was found to be a useful predictor to delineate the
normal and the abnormal groups.
Abstract: The clinical usefulness of heart rate variability is
limited to the range of Holter monitoring software available. These
software algorithms require a normal sinus rhythm to accurately
acquire heart rate variability (HRV) measures in the frequency
domain. Premature ventricular contractions (PVC) or more
commonly referred to as ectopic beats, frequent in heart failure,
hinder this analysis and introduce ambiguity. This investigation
demonstrates an algorithm to automatically detect ectopic beats by
analyzing discrete wavelet transform coefficients. Two techniques
for filtering and replacing the ectopic beats from the RR signal are
compared. One technique applies wavelet hard thresholding
techniques and another applies linear interpolation to replace ectopic
cycles. The results demonstrate through simulation, and signals
acquired from a 24hr ambulatory recorder, that these techniques can
accurately detect PVC-s and remove the noise and leakage effects
produced by ectopic cycles retaining smooth spectra with the
minimum of error.
Abstract: Cement, the most widely used construction material
is very brittle and characterized by low tensile strength and strain
capacity. Macro to nano fibers are added to cement to provide
tensile strength and ductility to it. Carbon Nanotube (CNT), one of
the nanofibers, has proven to be a promising reinforcing material in
the cement composites because of its outstanding mechanical
properties and its ability to close cracks at the nano level. The
experimental investigations for CNT reinforced cement is costly,
time consuming and involves huge number of trials. Mathematical
modeling of CNT reinforced cement can be done effectively and
efficiently to arrive at the mechanical properties and to reduce the
number of trials in the experiments. Hence, an attempt is made to
numerically study the effective mechanical properties of CNT
reinforced cement numerically using Representative Volume
Element (RVE) method. The enhancement in its mechanical
properties for different percentage of CNTs is studied in detail.
Abstract: The 2008 Candlelight Protests of Korea was very
significant to portray the political environment among the South
Korean youth. Many challenges and new advanced technologies have
driven the youth community to be engaged in the political arena that
has shifted them from traditional Korean youth to a very greater
community. Due to historical perspective with the people of North
Korea, the young generation has embraced different view of ethnic
nationalism. This study examines the youth involvement in politics in
line with their level of acceptance the practice of democracy. The
increase usage of new media has shown great results in the survey
results whereby the youth used as a platform to gain political
information and brought higher degree of their sociopolitical interests
among them. Furthermore, the rise of nationalism and patriotism will
be discussed in this paper to the dynamism of the political approaches
used by the Korea government