Abstract: Liquid-liquid extraction is a process using two immiscible
liquids to extract compounds from one phase without high
temperature requirement. Mostly, the technical implementation of
this process is carried out in mixer-settlers or extraction columns. In
real chemical processes, chemicals may have high viscosity and
contain impurities. These impurities may change the settling behavior
of the process without measurably changing the physical properties
of the phases. In the current study, the settling behavior and the affected
parameters in a high-viscosity system were observed. Batchsettling
experiments were performed to experimentally quantify the
settling behavior and the mixer-settler model of Henschke [1] was
used to evaluate the behavior of the toluene + water system. The
viscosity of the system was increased by adding polyethylene glycol
4000 to the aqueous phase. NaCl and Na2SO4 were used to study the
influence of electrolytes. The results from this study show that increasing
the viscosity of water has a higher influence on the settling
behavior in comparison to the effects of the electrolytes. It can be
seen from the experiments that at high salt concentrations, there was
no effect on the settling behavior.
Abstract: Two Amphiphilic catalysts, iron (III) dodecylbenzene
sulfonate and nickel (II) dodecylbenzene sulfonate, were synthesized
and used in the catalytic aquathermolysis of heavy crude oil to reduce
its viscosity. The prepared catalysts exhibited good performance in
the aquathermolysis and the viscosity is reduced by ~ 78.9 % for
Egyptian heavy crude oil. The chemical and physical properties of
heavy oil both before and after reaction were investigated by FT-IR,
dynamic viscosity, molecular weight and SARA analysis. The results
indicated that the content of resin, asphaltene, average molecular
weight and sulfur content of heavy oil is reduced after the catalytic
aquathermolysis.
Abstract: In this paper, four carbazole-based D-D-π-A organic
dyes code as CCT2A, CCT3A, CCT1PA and CCT2PA were reported.
A series of these organic dyes containing identical donor and
acceptor group but different π-system. The effect of replacing of
thiophene by phenyl thiophene as π-system on the physical
properties has been focused. The structural, energetic properties and
absorption spectra were theoretically investigated by means of
Density Functional Theory (DFT) and Time-Dependent Density
Functional Theory (TD-DFT). The results show that nonplanar
conformation due to steric hindrance in donor part (cabazolecarbazole
unit) of dye molecule can prevent unfavorable dye
aggregation. By means of the TD-DFT method, the absorption
spectra were calculated by B3LYP and BHandHLYP to study the
affect of hybrid functional on the excitation energy (Eg). The results
revealed the increasing of thiophene units not only resulted in
decreasing of Eg, but also found the shifting of absorption spectra to
higher wavelength. TD-DFT/BHandHLYP calculated results are
more strongly agreed with the experimental data than B3LYP
functions. Furthermore, the adsorptions of CCT2A and CCT3A on the
TiO2 anatase (101) surface were carried out by mean of the chemical
periodic calculation. The result exhibit the strong adsorption energy.
The calculated results provide our new organic dyes can be
effectively used as dye for Dye Sensitized Solar Cell (DSC).
Abstract: The interaction between wakes of bluff body and
airfoil have profound influences on system performance in many
industrial applications, e.g., turbo-machinery and cooling fan. The
present work investigates the effect of configuration include; airfoil-s
angle of attack, transverse and inline spacing of the models, on
frequency behavior of the cylinder-s near-wake. The experiments
carried on under subcritical flow regime, using the hot-wire
anemometry (HWA). The relationship between the Strouhal numbers
and arrangements provide an insight into the global physical
processes of wake interaction and vortex shedding.
Abstract: Mathematical and computational modeling of calcium
signalling in nerve cells has produced considerable insights into how
the cells contracts with other cells under the variation of biophysical
and physiological parameters. The modeling of calcium signaling in
astrocytes has become more sophisticated. The modeling effort has
provided insight to understand the cell contraction. Main objective
of this work is to study the effect of voltage gated (Operated)
calcium channel (VOC) on calcium profile in the form of advection
diffusion equation. A mathematical model is developed in the form
of advection diffusion equation for the calcium profile. The model
incorporates the important physiological parameter like diffusion
coefficient etc. Appropriate boundary conditions have been framed.
Finite volume method is employed to solve the problem. A program
has been developed using in MATLAB 7.5 for the entire problem
and simulated on an AMD-Turion 32-bite machine to compute the
numerical results.
Abstract: This study investigated the effect of cross sectional
geometry on sediment transport rate. The processes of sediment
transport are generally associated to environmental management,
such as pollution caused by the forming of suspended sediment in the
channel network of a watershed and preserving physical habitats and
native vegetations, and engineering applications, such as the
influence of sediment transport on hydraulic structures and flood
control design. Many equations have been proposed for computing
the sediment transport, the influence of many variables on sediment
transport has been understood; however, the effect of other variables
still requires further research. For open channel flow, sediment
transport capacity is recognized to be a function of friction slope,
flow velocity, grain size, grain roughness and form roughness, the
hydraulic radius of the bed section and the type and quantity of
vegetation cover. The effect of cross sectional geometry of the
channel on sediment transport is one of the variables that need
additional investigation. The width-depth ratio (W/d) is a
comparative indicator of the channel shape. The width is the total
distance across the channel and the depth is the mean depth of the
channel. The mean depth is best calculated as total cross-sectional
area divided by the top width. Channels with high W/d ratios tend to
be shallow and wide, while channels with low (W/d) ratios tend to be
narrow and deep. In this study, the effects of the width-depth ratio on
sediment transport was demonstrated theoretically by inserting the
shape factor in sediment continuity equation and analytically by
utilizing the field data sets for Yalobusha River. It was found by
utilizing the two approaches as a width-depth ratio increases the
sediment transport decreases.
Abstract: The objective of the study is to investigate the
effect of a footballer-s postural on selected physical fitness
components. Twenty-one (21) subjects of the university male
footballers under the Sport Excellence Center programme were
photographed using qualitative analysis. The postural variables
were stratified manually into normal and anomalies group and
their flexibility, strength and SAQ performance were
compared using the Mann-Whitney Test. The AROM
assessment and SAQ test reported no significance difference
(Z=-.398, p=0.711, p>0.05), similar to the lower body strength
was shown with no significance different (Z=-.493, p=0.640,
p>0.05). In contrast, only 1 RM strength test for the upper
body strength test shown with a significance different (Z=-
2.537, p=0.009, p
Abstract: Numerical design optimization is a powerful tool that
can be used by engineers during any stage of the design process.
There are many different applications for structural optimization. A
specific application that will be discussed in the following paper is
experimental data matching. Data obtained through tests on a physical
structure will be matched with data from a numerical model of that
same structure. The data of interest will be the dynamic characteristics
of an antenna structure focusing on the mode shapes and modal
frequencies. The structure used was a scaled and simplified model of
the Karoo Array Telescope-7 (KAT-7) antenna structure.
This kind of data matching is a complex and difficult task. This
paper discusses how optimization can assist an engineer during the
process of correlating a finite element model with vibration test data.
Abstract: A new numerical method for simultaneously updating mass and stiffness matrices based on incomplete modal measured data is presented. By using the Kronecker product, all the variables that are to be modified can be found out and then can be updated directly. The optimal approximation mass matrix and stiffness matrix which satisfy the required eigenvalue equation and orthogonality condition are found under the Frobenius norm sense. The physical configuration of the analytical model is preserved and the updated model will exactly reproduce the modal measured data. The numerical example seems to indicate that the method is quite accurate and efficient.
Abstract: Fishbone of Nile Tilapia (Tilapia nilotica), waste from the frozen Nile Tilapia fillet factory, is one of calcium sources. In order to increase fish bone powder value, this study aimed to investigate the effect of Tilapia bone flour (TBF) addition (5, 10, 15% by flour weight) on cooking quality, texture and sensory attributes of noodles. The results indicated that tensile strength, color value (a*) and water absorption of noodles significantly decreased (p£0.05) as the levels of TBF increased from 0-15%. While cooking loss, cooking time and color values (L* and b*) of noodles significantly increased (p£0.05). Sensory evaluation indicated that noodles with 5% TBF received the highest overall acceptability score.
Abstract: The demand of hydrocarbons has increased the
construction of pipelines and the protection of the physical and
mechanical integrity of the already existing infrastructure. Corrosion
is the main reason of failures in the pipeline and it is mostly produced
by acid (HCOOCH3). In this basis, a CFD code was used, in order to
study the corrosion of internal wall of hydrocarbons pipeline. In this
situation, the corrosion phenomenon shows a growing deposit, which
causes defect damages (welding or fabrication) at diverse positions
along the pipeline. The solution of the pipeline corrosion is based on
the diminution of the Naphthenic acid.
Abstract: Wireless Sensor Networks can be used to monitor the
physical phenomenon in such areas where human approach is nearly
impossible. Hence the limited power supply is the major constraint of
the WSNs due to the use of non-rechargeable batteries in sensor
nodes. A lot of researches are going on to reduce the energy
consumption of sensor nodes. Energy map can be used with
clustering, data dissemination and routing techniques to reduce the
power consumption of WSNs. Energy map can also be used to know
which part of the network is going to fail in near future. In this paper,
Energy map is constructed using the prediction based approach.
Adaptive alpha GM(1,1) model is used as the prediction model.
GM(1,1) is being used worldwide in many applications for predicting
future values of time series using some past values due to its high
computational efficiency and accuracy.
Abstract: The paper focuses on the area of context modeling with respect to the specification of context-aware systems supporting ubiquitous applications. The proposed approach, followed within the SIMPLICITY IST project, uses a high-level system ontology to derive context models for system components which consequently are mapped to the system's physical entities. For the definition of user and device-related context models in particular, the paper suggests a standard-based process consisting of an analysis phase using the Common Information Model (CIM) methodology followed by an implementation phase that defines 3GPP based components. The benefits of this approach are further depicted by preliminary examples of XML grammars defining profiles and components, component instances, coupled with descriptions of respective ubiquitous applications.
Abstract: Structural representation and technology mapping of
a Boolean function is an important problem in the design of nonregenerative
digital logic circuits (also called combinational logic
circuits). Library aware function manipulation offers a solution to
this problem. Compact multi-level representation of binary networks,
based on simple circuit structures, such as AND-Inverter Graphs
(AIG) [1] [5], NAND Graphs, OR-Inverter Graphs (OIG), AND-OR
Graphs (AOG), AND-OR-Inverter Graphs (AOIG), AND-XORInverter
Graphs, Reduced Boolean Circuits [8] does exist in
literature. In this work, we discuss a novel and efficient graph
realization for combinational logic circuits, represented using a
NAND-NOR-Inverter Graph (NNIG), which is composed of only
two-input NAND (NAND2), NOR (NOR2) and inverter (INV) cells.
The networks are constructed on the basis of irredundant disjunctive
and conjunctive normal forms, after factoring, comprising terms with
minimum support. Construction of a NNIG for a non-regenerative
function in normal form would be straightforward, whereas for the
complementary phase, it would be developed by considering a virtual
instance of the function. However, the choice of best NNIG for a
given function would be based upon literal count, cell count and
DAG node count of the implementation at the technology
independent stage. In case of a tie, the final decision would be made
after extracting the physical design parameters.
We have considered AIG representation for reduced disjunctive
normal form and the best of OIG/AOG/AOIG for the minimized
conjunctive normal forms. This is necessitated due to the nature of
certain functions, such as Achilles- heel functions. NNIGs are found
to exhibit 3.97% lesser node count compared to AIGs and
OIG/AOG/AOIGs; consume 23.74% and 10.79% lesser library cells
than AIGs and OIG/AOG/AOIGs for the various samples considered.
We compare the power efficiency and delay improvement achieved
by optimal NNIGs over minimal AIGs and OIG/AOG/AOIGs for
various case studies. In comparison with functionally equivalent,
irredundant and compact AIGs, NNIGs report mean savings in power
and delay of 43.71% and 25.85% respectively, after technology
mapping with a 0.35 micron TSMC CMOS process. For a
comparison with OIG/AOG/AOIGs, NNIGs demonstrate average
savings in power and delay by 47.51% and 24.83%. With respect to
device count needed for implementation with static CMOS logic
style, NNIGs utilize 37.85% and 33.95% lesser transistors than their
AIG and OIG/AOG/AOIG counterparts.
Abstract: To comply with the international human right
legislation concerning the freedom of movement, transport systems
are required to be made accessible in order that all citizens, regardless
of their physical condition, have equal possibilities to use them. In
Hungary, apparently there is a considerable default in the
improvement of accessible public transport. This study is aiming to
overview the current Hungarian situation and to reveal the reasons of
the deficiency. The result shows that in spite of the relatively
favourable juridical background linked to the accessibility needs and
to the rights of persons with disabilities there is a strong delay in
putting all in practice in the field of public transport. Its main reason
is the lack of financial resource and referring to this the lack of
creating mandatory regulations. In addition to this the proprietary
rights related to public transport are also variable, which also limits
the improvement possibilities. Consequently, first of all an accurate
and detailed regulatory procedure is expected to change the present
unfavourable situation and to create the conditions of the fast
realization, which is already behind time.
Abstract: Previous research has demonstrated that negative
attitudes towards people with physical disabilities and obesity are
predicted by a component of perceived vulnerability to disease; germ
aversion. These findings have been suggested as illustrations of an
evolved but over-active mechanism which promotes the avoidance of
pathogen-carrying individuals. To date, this interpretation of attitude
formation has not been explored with regard to people with
intellectual disability, and no attempts have been made to examine
possible mediating factors. This study examined attitudes in 333
adults and demonstrated that the moderate positive relationship
between germ aversion and negative attitudes toward people with
intellectual disability is fully mediated by social dominance
orientation, a general preference for hierarchies and inequalities
among social groups. These findings have implications for the
design of programs which attempt to promote community acceptance
and inclusion of people with disabilities.
Abstract: In a competitive production environment, critical
decision making are based on data resulted by random sampling of
product units. Efficiency of these decisions depends on data quality
and also their reliability scale. This point leads to the necessity of a
reliable measurement system. Therefore, the conjecture process and
analysing the errors contributes to a measurement system known as
Measurement System Analysis (MSA). The aim of this research is on
determining the necessity and assurance of extensive development in
analysing measurement systems, particularly with the use of
Repeatability and Reproducibility Gages (GR&R) to improve
physical measurements. Nowadays in productive industries,
repeatability and reproducibility gages released so well but they are
not applicable as well as other measurement system analysis
methods. To get familiar with this method and gain a feedback in
improving measurement systems, this survey would be on
“ANOVA" method as the most widespread way of calculating
Repeatability and Reproducibility (R&R).
Abstract: wind catchers have been served as a cooling system, used to provide acceptable ventilation by means of renewable energy of wind. In the present study, the city of Yazd in arid climate is selected as case study. From the architecture point of view, learning about wind catchers in this study is done by means of field surveys. Research method for selection of the case is based on random form, and analytical method. Wind catcher typology and knowledge of relationship governing the wind catcher's architecture were those measures that are taken for the first time. 53 wind catchers were analyzed. The typology of the wind-catchers is done by the physical analyzing, patterns and common concepts as incorporated in them. How the architecture of wind catcher can influence their operations by analyzing thermal behavior are the archetypes of selected wind catchers. Calculating fluids dynamics science, fluent software and numerical analysis are used in this study as the most accurate analytical approach. The results obtained from these analyses show the formal specifications of wind catchers with optimum operation in Yazd. The knowledge obtained from the optimum model could be used for design and construction of wind catchers with more improved operation
Abstract: Increasing use of cell phone as a medium of human interaction is playing a vital role in solving riddles of crime as well. A young girl went missing from her home late in the evening in the month of August, 2008 when her enraged relatives and villagers physically assaulted and chased her fiancée who often frequented her home. Two years later, her mother lodged a complaint against the relatives and the villagers alleging that after abduction her daughter was either sold or killed as she had failed to trace her. On investigation, a rusted cell phone with partial visible IMEI number, clothes, bangles, human skeleton etc. recovered from abandoned well in the month of May, 2011 were examined in the lab. All hopes pinned on identity of cell phone, for only linking evidence to fix the scene of occurrence supported by call detail record (CDR) and to dispel doubts about mode of sudden disappearance or death as DNA technology did not help in establishing identity of the deceased. The conventional scientific methods were used without success and international mobile equipment identification number of the cell phone could be generated by using statistical analysis followed by online verification.
Abstract: In this paper; we are interested principally in dynamic modelling of quadrotor while taking into account the high-order nonholonomic constraints in order to develop a new control scheme as well as the various physical phenomena, which can influence the dynamics of a flying structure. These permit us to introduce a new state-space representation. After, the use of Backstepping approach for the synthesis of tracking errors and Lyapunov functions, a sliding mode controller is developed in order to ensure Lyapunov stability, the handling of all system nonlinearities and desired tracking trajectories. Finally simulation results are also provided in order to illustrate the performances of the proposed controller.