Abstract: Flow movement in unsaturated soil can be expressed
by a partial differential equation, named Richards equation. The
objective of this study is the finding of an appropriate implicit
numerical solution for head based Richards equation. Some of the
well known finite difference schemes (fully implicit, Crank Nicolson
and Runge-Kutta) have been utilized in this study. In addition, the
effects of different approximations of moisture capacity function,
convergence criteria and time stepping methods were evaluated. Two
different infiltration problems were solved to investigate the
performance of different schemes. These problems include of vertical
water flow in a wet and very dry soils. The numerical solutions of
two problems were compared using four evaluation criteria and the
results of comparisons showed that fully implicit scheme is better
than the other schemes. In addition, utilizing of standard chord slope
method for approximation of moisture capacity function, automatic
time stepping method and difference between two successive
iterations as convergence criterion in the fully implicit scheme can
lead to better and more reliable results for simulation of fluid
movement in different unsaturated soils.
Abstract: The sensitivity of orifice plate metering to disturbed
flow (either asymmetric or swirling) is a subject of great concern to
flow meter users and manufacturers. The distortions caused by pipe
fittings and pipe installations upstream of the orifice plate are major
sources of this type of non-standard flows. These distortions can alter
the accuracy of metering to an unacceptable degree. In this work, a
multi-scale object known as metal foam has been used to generate a
predetermined turbulent flow upstream of the orifice plate. The
experimental results showed that the combination of an orifice plate
and metal foam flow conditioner is broadly insensitive to upstream
disturbances. This metal foam demonstrated a good performance in
terms of removing swirl and producing a repeatable flow profile
within a short distance downstream of the device. The results of using
a combination of a metal foam flow conditioner and orifice plate for
non-standard flow conditions including swirling flow and asymmetric
flow show this package can preserve the accuracy of metering up to
the level required in the standards.
Abstract: The condition of lightning surge causes the traveling waves and the temporary increase in voltage in the transmission line system. Lightning is the most harmful for destroying the transmission line and setting devices so it is necessary to study and analyze the temporary increase in voltage for designing and setting the surge arrester. This analysis describes the figure of the lightning wave in transmission line with 115 kV voltage level in Thailand by using ATP/EMTP program to create the model of the transmission line and lightning surge. Because of the limit of this program, it must be calculated for the geometry of the transmission line and surge parameter and calculation in the manual book for the closest value of the parameter. On the other hand, for the effects on surge protector when the lightning comes, the surge arrester model must be right and standardized as metropolitan electrical authority's standard. The candidate compared the real information to the result from calculation, also. The results of the analysis show that the temporary increase in voltage value will be rise to 326.59 kV at the line which is done by lightning when the surge arrester is not set in the system. On the other hand, the temporary increase in voltage value will be 182.83 kV at the line which is done by lightning when the surge arrester is set in the system and the period of the traveling wave is reduced, also. The distance for setting the surge arrester must be as near to the transformer as possible. Moreover, it is necessary to know the right distance for setting the surge arrester and the size of the surge arrester for preventing the temporary increase in voltage, effectively.
Abstract: Does open ended creative technology give positive impact in learning design? Although there are many researchers had examined on the impact of technology on design education but there are very few conclusive researches done on the impact of open ended used of software to learning design. This paper sought to investigate a group of student-s experience on relatively wider range of software application within the context of design project. A typography design project was used to create a learning environment with the aim of inculcate design skills into the learners and increase their creative problem-solving and critical thinking skills. The methods used in this study were questionnaire survey and personal observation which will be focus on the individual and group response during the completion of the task.
Abstract: Nowadays, under developed countries for progress in
science and technology and decreasing the technologic gap with
developed countries, increasing the capacities and technology
transfer from developed countries. To remain competitive, industry is
continually searching for new methods to evolve their products.
Business model is one of the latest buzzwords in the Internet and
electronic business world. To be successful, organizations must look
into the needs and wants of their customers. This research attempts to
identify a specific feature of the company with a strong competitive
advantage by analyzing the cause of Customer satisfaction. Due to
the rapid development of knowledge and information technology,
business environments have become much more complicated.
Information technology can help a firm aiming to gain a competitive
advantage. This study explores the role and effect of Information
Communication Technology in Business Models and Customer
satisfaction on firms and also relationships between ICTs and
Outsourcing strategic.
Abstract: This paper analysed the food security situation among
Nigerian rural farmers. Data collected on 202 rural farmers from
Benue State were analysed using descriptive and inferential statistics.
The study revealed that majority of the respondents (60.83%) had
medium dietary diversity. Furthermore, household daily calorie
requirement for the food secure households was 10,723 and the
household daily calorie consumption was 12,598, with a surplus
index of 0.04. The food security index was 1.16. The Household
daily per capita calorie consumption was 3,221.2. For the food
insecure households, the household daily calorie requirement was
20,213 and the household daily calorie consumption was 17,393. The
shortfall index was 0.14. The food security index was 0.88. The
Household daily per capita calorie consumption was 2,432.8. The
most commonly used coping strategies during food stress included
intercropping (99.2%), reliance on less preferred food (98.1%),
limiting portion size at meal times (85.8%) and crop diversification
(70.8%).
Abstract: The purpose of this research is: a) to investigate how
the HR practices influence psychological contracts, b) to examine the
influence of psychological contracts to individual behavior and to
contribute individually, c) to study the psychological contact through
leadership. This research using mixed methods, qualitative and
quantitative research methods were utilized to gather the data
collected using a qualitative method by the HR Manager who is in
charge of the trainings from the staffs and quantitative method
(survey) by using questionnaire was utilized to draw upon and to
elaborate on the recurring themes present during the interviews. The
survey was done to 400 staffs of the company. The study found that
leadership styles supporting the firm’s HR strategy is the key in
making psychological contracts that benefit both the firm and its
members.
Abstract: The aim of the study was to follow changes of powervelocity
relationship in female volleyball players during an annual
training cycle. The study was conducted on eleven female volleyball
players: age 21.6±1.7 years, body height 177.9±4.7 cm, body mass
71.3±6.6 kg and training experience 8.6±3.3 years. Power–velocity
relationship was determined from five maximal 10-second
cycloergometer efforts with external loads equal: 2.5, 5.0, 7.5, 10.0
and 12.5% of body weight (BW) before (I) and after (II) the
preparatory period, after the first (III) and second (IV) competitive
season. The maximal power output increased from 9.30±0.85 W•kg–1
(I) to 9.50±0.96 W•kg–1 (II), 9.77±0.96 W•kg–1 (III) and 9.95±1.13
W•kg–1 (IV, p
Abstract: The purpose of this study is to analyze Green IT industry in major developed countries and to suggest overall directions for IT-Energy convergence industry. Recently, IT industry is pointed out as a problem such as environmental pollution, energy exhaustion, and high energy consumption. Therefore, Green IT gets focused which concerns as solution of these problems. However, since it is a beginning stage of this convergence area, there are only a few studies of IT-Energy convergence industry. According to this, this study examined the major developed countries in terms of institution arrangements, resources, markets and companies based on Van de Ven(1999)'s social system framework that shows relationship among key components of industrial infrastructure. Subsequently, the direction of the future study of convergence on IT and Energy industry is proposed.
Abstract: The purpose of this study is to find natural gait of
biped robot such as human being by analyzing the COG (Center Of
Gravity) trajectory of human being's gait. It is discovered that human
beings gait naturally maintain the stability and use the minimum
energy. This paper intends to find the natural gait pattern of biped
robot using the minimum energy as well as maintaining the stability by
analyzing the human's gait pattern that is measured from gait image on
the sagittal plane and COG trajectory on the frontal plane. It is not
possible to apply the torques of human's articulation to those of biped
robot's because they have different degrees of freedom. Nonetheless,
human and 5-link biped robots are similar in kinematics. For this, we
generate gait pattern of the 5-link biped robot by using the GA
algorithm of adaptation gait pattern which utilize the human's ZMP
(Zero Moment Point) and torque of all articulation that are measured
from human's gait pattern. The algorithm proposed creates biped
robot's fluent gait pattern as that of human being's and to minimize
energy consumption because the gait pattern of the 5-link biped robot
model is modeled after consideration about the torque of human's each
articulation on the sagittal plane and ZMP trajectory on the frontal
plane. This paper demonstrate that the algorithm proposed is superior
by evaluating 2 kinds of the 5-link biped robot applied to each gait
patterns generated both in the general way using inverse kinematics
and in the special way in which by considering visuality and
efficiency.
Abstract: Several trillion cigarettes produced worldwide annually lead to many thousands of kilograms of toxic waste. Cigarette butts (CBs) accumulate in the environment due to the poor biodegradability of the cellulose acetate filters. This paper presents some of the results from a continuing study on recycling CBs into fired clay bricks. Physico-mechanical properties of fired clay bricks manufactured with different percentages of CBs are reported and discussed. The results show that the density of fired bricks was reduced by up to 30 %, depending on the percentage of CBs incorporated into the raw materials. Similarly, the compressive strength of bricks tested decreased according to the percentage of CBs included in the mix. The thermal conductivity performance of bricks was improved by 51 and 58 % for 5 and 10 % CBs content respectively. Leaching tests were carried out to investigate the levels of possible leachates of heavy metals from the manufactured clay-CB bricks. The results revealed trace amounts of heavy metals.
Abstract: Experiments were conducted to characterize fire
properties of wood exposed to the certain external heat flux and
under variety of wood moisture content. Six kinds of Indonesian
wood: keruing, sono, cemara, kamper, pinus, and mahoni were
exposed to radiant heat from a conical heater, result in appearance of
a stable flame on the wood surface caused by spontaneous ignition. A
thermocouple K-type was used to measure the wood surface
temperature. Temperature histories were recorded throughout each
experiment at 1 s intervals using a TC-08. Data of first ignition time
and temperature, end ignition time and temperature, and charring rate
have been successfully collected. It was found that the ignition
temperature and charring rate depend on moisture content of wood.
Abstract: Snoring is prevalent and is the most significant feature
of sleep-disordered breathing (SDB). Ignore the therapies of SDB will
lead to serious problems in health. Based on the research of
mechanisms, diagnosis, and treatments of snoring, oral appliances are
ensured in therapeutic effect and compliance, especially the
mandibular advancement devices (MADs). Market survey includes
commercial product reviews and patent analyses. Due to pay more
attention to the sleep medicine, the oral appliances are considered as a
standard treatment of snoring that promoted by American Academy of
Sleep Medicine (AASM). There are more and more adjustable MADs
developed since 1995. According to the patent analyses, there are
many drawbacks existed in the present design, such as uncomfortable,
high cost, bulky volume, and complex adjustment. In this study,
several new designs of the MAD are proposed.
Abstract: The present work presents a method of calculating the
ductility of rectangular sections of beams considering nonlinear
behavior of concrete and steel. This calculation procedure allows us
to trace the curvature of the section according to the bending
moment, and consequently deduce ductility. It also allowed us to
study the various parameters that affect the value of the ductility. A
comparison of the effect of maximum rates of tension steel, adopted
by the codes, ACI [1], EC8 [2] and RPA [3] on the value of the
ductility was made. It was concluded that the maximum rate of steels
permitted by the ACI [1] codes and RPA [3] are almost similar in
their effect on the ductility and too high. Therefore, the ductility
mobilized in case of an earthquake is low, the inverse of code EC8
[2]. Recommendations have been made in this direction.
Abstract: Bridges are one of the main components of
transportation networks. They should be functional before and after
earthquake for emergency services. Therefore we need to assess
seismic performance of bridges under different seismic loadings.
Fragility curve is one of the popular tools in seismic evaluations. The
fragility curves are conditional probability statements, which give the
probability of a bridge reaching or exceeding a particular damage
level for a given intensity level. In this study, the seismic
performance of a two-span simply supported concrete bridge is
assessed. Due to usual lack of empirical data, the analytical fragility
curve was developed by results of the dynamic analysis of bridge
subjected to the different time histories in near-fault area.
Abstract: The present study based on removal of natural dyes of
Roselle petals, then used Roselle petals powder (RPP) as an
adsorbent for the removal of methylene blue dye (as a typical cationic
or basic dye) from aqueous solutions. The present study shows that
used Roselle petals powder exhibit adsorption trend for the dye. The
adsorption processes were carried out at various conditions of
temperatures ranging from 278 to 338 K ± 2 K , concentrations,
processing time and a wide range of pH between 2.5-11. Adsorption
isotherm equations such as Freundlich, and Langmuir were applied to
calculate the values of respective constants. Adsorption study was
found that the currently introduced adsorbent can be used to remove
cationic dyes such as methylene blue from aqueous solutions.
Abstract: The number of cross-border student between Hong
Kong and mainland China is increasing due to an increase of
cross-border marriage between Hong Kong and mainland China. Since
the education system is different to the mainland China, the statue
Since all the children who have the right of abode in Hong Kong
entitle to have free education in Hong Kong, many of the cross-border
family prefer to send the children back to Hong Kong for their
education.
Abstract: Cognitive models allow predicting some aspects of utility
and usability of human machine interfaces (HMI), and simulating
the interaction with these interfaces. The action of predicting is based
on a task analysis, which investigates what a user is required to do
in terms of actions and cognitive processes to achieve a task. Task
analysis facilitates the understanding of the system-s functionalities.
Cognitive models are part of the analytical approaches, that do not
associate the users during the development process of the interface.
This article presents a study about the evaluation of a human
machine interaction with a contextual assistant-s interface using ACTR
and GOMS cognitive models. The present work shows how these
techniques may be applied in the evaluation of HMI, design and
research by emphasizing firstly the task analysis and secondly the
time execution of the task. In order to validate and support our
results, an experimental study of user performance is conducted at
the DOMUS laboratory, during the interaction with the contextual
assistant-s interface. The results of our models show that the GOMS
and ACT-R models give good and excellent predictions respectively
of users performance at the task level, as well as the object level.
Therefore, the simulated results are very close to the results obtained
in the experimental study.
Abstract: This paper presents the findings of an
experimental investigation to study the effect of alkali content
in geopolymer mortar specimens exposed to sulphuric acid.
Geopolymer mortar specimens were manufactured from Class F fly
ash by activation with a mixture of sodium hydroxide and sodium
silicate solution containing 5% to 8% Na2O. Durability of specimens
were assessed by immersing them in 10% sulphuric acid solution and
periodically monitoring surface deterioration and depth of
dealkalization, changes in weight and residual compressive strength
over a period of 24 weeks. Microstructural changes in the specimens
were studied with Scanning electron microscopy (SEM) and EDAX.
Alkali content in the activator solution significantly affects the
durability of fly ash based geopolymer mortars in sulphuric acid.
Specimens manufactured with higher alkali content performed better
than those manufactured with lower alkali content. After 24 weeks in
sulphuric acid, specimen with 8% alkali still recorded a residual
strength as high as 55%.
Abstract: Soils are normally dried in either a convection oven or stove. Laboratory moisture content testing indicated that the typical drying durations for a convection oven were, 24 hours. The purpose of this study was to determine the accuracy and soil drying duration of both, moisture content and liquid limit using microwave radiation. The soils were tested with both, convection and microwave ovens. The convection oven was considered to produce the true values for both, natural moisture content and liquid limit of soils; it was, therefore, used as a basis for comparison for the results of the microwave ovens. The samples used in this study were obtained from different projects of Consulting Engineering Bureau of College of Engineering of Sulaimani University. These samples were collected from different locations and at the different depths and consist mostly of brown and light brown clay and silty clay. A total of 102 samples were prepared. 26 of them were tested for natural moisture determination, while the other 76 were used for liquid limits determination