Abstract: To achieve reliable solutions, today-s numerical and
experimental activities need developing more accurate methods and
utilizing expensive facilities, respectfully in microchannels. The analytical
study can be considered as an alternative approach to alleviate
the preceding difficulties. Among the analytical solutions, those with
high robustness and low complexities are certainly more attractive.
The perturbation theory has been used by many researchers to analyze
microflows. In present work, a compressible microflow with constant
heat flux boundary condition is analyzed. The flow is assumed to be
fully developed and steady. The Mach and Reynolds numbers are also
assumed to be very small. For this case, the creeping phenomenon
may have some effect on the velocity profile. To achieve robustness
solution it is assumed that the flow is quasi-isothermal. In this study,
the creeping term which appears in the slip boundary condition
is formulated by different mathematical formulas. The difference
between this work and the previous ones is that the creeping term
is taken into account and presented in non-dimensionalized form.
The results obtained from perturbation theory are presented based
on four non-dimensionalized parameters including the Reynolds,
Mach, Prandtl and Brinkman numbers. The axial velocity, normal
velocity and pressure profiles are obtained. Solutions for velocities
and pressure for two cases with different Br numbers are compared
with each other and the results show that the effect of creeping
phenomenon on the velocity profile becomes more important when
Br number is less than O(ε).
Abstract: ZnO+Ga2O3 functionally graded thin films (FGTFs)
were examined for their potential use as Solar cell and organic light
emitting diodes (OLEDs). FGTF transparent conducting oxides (TCO)
were fabricated by combinatorial RF magnetron sputtering. The
composition gradient was controlled up to 10% by changing the
plasma power of the two sputter guns. A Ga2O3+ZnO graded region
was placed on the top layer of ZnO. The FGTFs showed up to 80%
transmittance. Their surface resistances were reduced to < 10% by
increasing the Ga2O3: pure ZnO ratio in the TCO. The FGTFs- work
functions could be controlled within a range of 0.18 eV. The
controlled work function is a very promising technology because it
reduces the contact resistance between the anode and Hall transport
layers of OLED and solar cell devices.
Abstract: The aim of this study is to compare the innovativeness, risk taking, and focusing on opportunity of the nurse managers and nurses. The data are collected from nurse managers and nurses in Ondokuz Mayıs University, Faculty of Medicine Hospital and Karadeniz Technical University, Faculty of Medicine Hospital. The study sample consisted of 151 participants, 76 nurse managers (50.3%) and 75 nurses (49.7%). All participants have been assessed by Participant Information Form and Corporate Entrepreneurship Scale. In data analysis, independent t-test has applied. The results show that there are significant differences between nurse managers and nurses on innovativeness (t = 2.42, p < 0.05), risk taking (t = 3.62, p < 0.01), and focusing on opportunity (t = 2.16, p < 0.05). Consequently, it can be said that nurse managers have more innovativeness than nurses and tend to take more risks and focus more on opportunities.
Abstract: In this paper, a new Genetic Algorithm (GA) based
methodology is proposed to optimize the Degree of Hybridization
(DOH) in a passenger parallel hybrid car. At first step, target
parameters for the vehicle are decided and then using ADvanced
VehIcle SimulatOR (ADVISOR) software, the variation pattern of
these target parameters, across the different DOHs, is extracted. At
the next step, a suitable cost function is defined and is optimized
using GA. In this paper, also a new technique has been proposed for
deciding the number of battery modules for each DOH, which leads
to a great improvement in the vehicle performance. The proposed
methodology is so simple, fast and at the same time, so efficient.
Abstract: The evolution of ICT has changed all sections of society and these changes have been creating an irreversible impact on higher education institutions, which are expected to adopt innovative technologies in their teaching practices. As theorical framework this study select Rogers theory of innovation diffusion which is widely used to illustrate how technologies move from a localized invented to a widespread evolution on organizational practices. Based on descriptive statistical data collected in a European higher education institution three years longitudinal study was conducted for analyzing and discussion the different stages of a LMS adoption process. Results show that ICT integration in higher education is not progressively successful and a linear process and multiple aspects must be taken into account.
Abstract: Horizontal continuous casting is widely used to
produce semi-finished non-Ferrous products. Homogeneity in the
metallurgical characteristics and mechanical properties for this
product is vital for industrial application. In the present work, the
microstructure and mechanical properties of a horizontal continuous
cast two-phase brass billet have been studied. Impact strength and
hardness variations were examined and the phase composition and
porosity studied with image analysis software. Distinct differences in
mechanical properties were observed between the upper, middle and
lower parts of the billet, which are explained in terms of the
morphology and size of the phase in the microstructure. Hardness
variation in the length of billet is higher in upper area but impact
strength is higher in lower areas.
Abstract: The paper presents the results of a series of
experiments conducted on physical models of Quarter-circle
breakwater (QBW) in a two dimensional monochromatic wave
flume. The purpose of the experiments was to evaluate the reflection
coefficient Kr of QBW models of different radii (R) for different
submergence ratios (d/hc), where d is the depth of water and hc is the
height of the breakwater crest from the sea bed. The radii of the
breakwater models studied were 20cm, 22.5cm, 25cm, 27.5cm and
submergence ratios used varied from 1.067 to 1.667. The wave
climate off the Mangalore coast was used for arriving at the various
model wave parameters. The incident wave heights (Hi) used in the
flume varied from 3 to 18cm, and wave periods (T) ranged from 1.2 s
to 2.2 s. The water depths (d) of 40cm, 45cm and 50cm were used in
the experiments. The data collected was analyzed to compute
variation of reflection coefficient Kr=Hr/Hi (where Hr=reflected wave
height) with the wave steepness Hi/gT2 for various R/Hi
(R=breakwater radius) values. It was found that the reflection
coefficient increased as incident wave steepness increased. Also as
wave height decreases reflection coefficient decreases and as
structure radius R increased Kr decreased slightly.
Abstract: Detecting object in video sequence is a challenging
mission for identifying, tracking moving objects. Background
removal considered as a basic step in detected moving objects tasks.
Dual static cameras placed in front and rear moving platform
gathered information which is used to detect objects. Background
change regarding with speed and direction moving platform, so
moving objects distinguished become complicated. In this paper, we
propose framework allows detection moving object with variety of
speed and direction dynamically. Object detection technique built on
two levels the first level apply background removal and edge
detection to generate moving areas. The second level apply Moving
Areas Filter (MAF) then calculate Correlation Score (CS) for
adjusted moving area. Merging moving areas with closer CS and
marked as moving object. Experiment result is prepared on real scene
acquired by dual static cameras without overlap in sense. Results
showing accuracy in detecting objects compared with optical flow
and Mixture Module Gaussian (MMG), Accurate ratio produced to
measure accurate detection moving object.
Abstract: There have been many games developing simulation
of soccer games. Many of these games have been designed with
highly realistic features to attract more users. Many have also
incorporated better artificial intelligent (AI) similar to that in a real
soccer game. One of the challenging issues in a soccer game is the
cooperation, coordination and negotiation among distributed agents
in a multi-agent system. This paper focuses on the incorporation of
multi-agent technique in a soccer game domain. The better the
cooperation of a multi-agent team, the more intelligent the game will
be. Thus, past studies were done on the robotic soccer game because
of the better multi-agent system implementation. From this study, a
better approach and technique of multi-agent behavior could be
select to improve the author-s 2D online soccer game.
Abstract: Recurrence of aneurysm rupture can be attributed to
coil migration and compaction. In order to verify the effects of
hemodynamics on coil compaction and migration, we analyze the
forces and displacements on the coil bundle using a computational
method. Lateral aneurysms partially filled coils are modeled, and
blood flow fields and coil deformations are simulated considering
fluid and solid interaction. Effects of aneurysm neck size and parent
vessel geometry are also investigated. The results showed that coil
deformation was larger in the aneurysms with a wider neck. Parent
vessel geometry and aneurysm neck size also affected mean pressure
force profiles on the coil surface. Pressure forces were higher in wide
neck models with curved parent vessel geometry. Simulation results
showed that coils in the wide neck aneurysm with a curved parent
vessel may be displaced and compacted more easily.
Abstract: Message Passing Interface is widely used for Parallel
and Distributed Computing. MPICH and LAM are popular open
source MPIs available to the parallel computing community also
there are commercial MPIs, which performs better than MPICH etc.
In this paper, we discuss a commercial Message Passing Interface, CMPI
(C-DAC Message Passing Interface). C-MPI is an optimized
MPI for CLUMPS. It is found to be faster and more robust compared
to MPICH. We have compared performance of C-MPI and MPICH
on Gigabit Ethernet network.
Abstract: Implementing Information Technology/ Information
System (IT/IS) is critical for every industry as its potential benefits
have been to motivate many industries including the Malaysian
construction industry to invest in it. To successfully implement IT/IS
has become the major concern for every organisation. Identifying the
critical success factors (CSFs) has become the main agenda for
researchers, academicians and practitioners due to the wide number
of failures reported. This research paper seeks to identify the CSFs
that influence the successful implementation of IT/IS in construction
industry in Malaysia. Limited factors relating to people issue will be
highlighted here to showcase some as it becomes one of the major
contributing factors to the failure. Three (3) organisations have
participated in this study. Semi-structured interviews are employed as
they offer sufficient flexibility to ensure that all relevant factors are
covered. Several key issues contributing to successful
implementations of IT/IS are identified. The results of this study
reveal that top management support, communication, user
involvement, IT staff roles and responsibility, training/skills, leader/
IT Leader, organisation culture, knowledge/ experience, motivation,
awareness, focus and ambition, satisfaction, teamwork/ collaboration,
willingness to change, attitude, commitment, management style,
interest in IT, employee behaviour towards collaborative
environment, trust, interpersonal relationship, personal characteristic
and competencies are significantly associated with the successful
implementations of IT/IS. It is anticipated that this study will create
awareness and contribute to a better understanding amongst
construction industry players and will assist them to successfully
implement IT/IS.
Abstract: The effects of global warming on India vary from the
submergence of low-lying islands and coastal lands to the melting of
glaciers in the Indian Himalayas, threatening the volumetric flow rate
of many of the most important rivers of India and South Asia. In
India, such effects are projected to impact millions of lives. As a
result of ongoing climate change, the climate of India has become
increasingly volatile over the past several decades; this trend is
expected to continue.
Climate change is one of the most important global environmental
challenges, with implications for food production, water supply,
health, energy, etc. Addressing climate change requires a good
scientific understanding as well as coordinated action at national and
global level. The climate change issue is part of the larger challenge
of sustainable development. As a result, climate policies can be more
effective when consistently embedded within broader strategies
designed to make national and regional development paths more
sustainable. The impact of climate variability and change, climate
policy responses, and associated socio-economic development will
affect the ability of countries to achieve sustainable development
goals.
A very well calibrated Soil and Water Assessment Tool (R2 =
0.9968, NSE = 0.91) was exercised over the Khatra sub basin of the
Kangsabati River watershed in Bankura district of West Bengal,
India, in order to evaluate projected parameters for agricultural
activities. Evapotranspiration, Transmission Losses, Potential
Evapotranspiration and Lateral Flow to reach are evaluated from the
years 2041-2050 in order to generate a picture for sustainable
development of the river basin and its inhabitants.
India has a significant stake in scientific advancement as well as
an international understanding to promote mitigation and adaptation.
This requires improved scientific understanding, capacity building,
networking and broad consultation processes. This paper is a
commitment towards the planning, management and development of
the water resources of the Kangsabati River by presenting detailed
future scenarios of the Kangsabati river basin, Khatra sub basin, over
the mentioned time period.
India-s economy and societal infrastructures are finely tuned to the
remarkable stability of the Indian monsoon, with the consequence
that vulnerability to small changes in monsoon rainfall is very high.
In 2002 the monsoon rains failed during July, causing profound loss
of agricultural production with a drop of over 3% in India-s GDP.
Neither the prolonged break in the monsoon nor the seasonal rainfall
deficit was predicted. While the general features of monsoon
variability and change are fairly well-documented, the causal
mechanisms and the role of regional ecosystems in modulating the
changes are still not clear. Current climate models are very poor at
modelling the Asian monsoon: this is a challenging and critical
region where the ocean, atmosphere, land surface and mountains all
interact. The impact of climate change on regional ecosystems is
likewise unknown. The potential for the monsoon to become more
volatile has major implications for India itself and for economies
worldwide. Knowledge of future variability of the monsoon system,
particularly in the context of global climate change, is of great
concern for regional water and food security.
The major findings of this paper were that of all the chosen
projected parameters, transmission losses, soil water content,
potential evapotranspiration, evapotranspiration and lateral flow to
reach, display an increasing trend over the time period of years 2041-
2050.
Abstract: Circular tubes have been widely used as structural
members in engineering application. Therefore, its collapse behavior
has been studied for many decades, focusing on its energy absorption
characteristics. In order to predict the collapse behavior of members,
one could rely on the use of finite element codes or experiments.
These tools are helpful and high accuracy but costly and require
extensive running time. Therefore, an approximating model of tubes
collapse mechanism is an alternative for early step of design. This
paper is also aimed to develop a closed-form solution of thin-walled
circular tube subjected to bending. It has extended the Elchalakani et
al.-s model (Int. J. Mech. Sci.2002; 44:1117-1143) to include the
rate of energy dissipation of rolling hinge in the circumferential
direction. The 3-D geometrical collapse mechanism was analyzed by
adding the oblique hinge lines along the longitudinal tube within the
length of plastically deforming zone. The model was based on the
principal of energy rate conservation. Therefore, the rates of internal
energy dissipation were calculated for each hinge lines which are
defined in term of velocity field. Inextensional deformation and
perfect plastic material behavior was assumed in the derivation of
deformation energy rate. The analytical result was compared with
experimental result. The experiment was conducted with a number of
tubes having various D/t ratios. Good agreement between analytical
and experiment was achieved.
Abstract: This paper explores the use of project work in a
content-based instruction in a Rajabhat University, a teacher college,
where student teachers are instructed to perform teaching roles
mainly in basic education level. Its aim is to link theory to practice,
and to help language teachers maximize the full potential of project
work for genuine communication and give real meaning to writing
activity. Two research questions are formulated to guide this study:
a) What is the academic achievement of the students- writing skill
against the 70% attainment target after the use of project to enhance
the skill? and b) To what degree is the development of the students-
writing skills during the course of project to enhance the skill? The
sample of the study comprised of 38 fourth-year English major
students. The data was collected by means of achievement test,
student writing works, and project diary. The scores in the summative
achievement test were analyzed by mean score, standard deviation,
and t-test. Project diary serves as students- record of the language
acquired during the project. List of structures and vocabulary noted in
the diary has shown students- ability to attend to, recognize, and
focus on meaningful patterns of language forms.
Abstract: Bionanotechnology deals with nanoscopic interactions between nanostructured materials and biological systems. Polymer nanocomposites with optimized biological activity have attracted great attention. Nanoclay is considered as reinforcing nanofiller in manufacturing of high performance nanocomposites. In current study, organomodified-nanoclay with negatively charged silicate layers was incorporated into biomedical grade silicone rubber. Nanoparticle loading has been tailored to enhance cell behavior. Addition of nanoparticles led to improved mechanical properties of substrate with enhanced strength and stiffness while no toxic effects was observed. Results indicated improved viability and proliferation of cells by addition of nanofillers. The improved mechanical properties of the matrix result in proper cell response through adjustment and arrangement of cytoskeletal fibers. Results can be applied in tissue engineering when enhanced substrates are required for improvement of cell behavior for in vivo applications.
Abstract: The purpose of this study was to study the practical
delivery room experience of nursing students. The respondents were
6 junior nursing students of Suranaree University of Technology who
had a direct experience from practicing in a delivery room between
January 9 and March 30, 2012 as part of Nursing Care of the Family
and Midwifery 3. The data was collected by using in-depth interview,
observation, and reflective report. The results of the study found that
the practical delivery room experience of nursing students consisted
of three issues: 1) stress and coping with stress during practical
exercise, 2) changes in daily routine, and 3) source during practical
exercise. The results of this study would lead to the understanding of
the meaning of the practical exercise of nursing students.
Abstract: MMR vaccine failure had been reported globally and
here we report that it occurs now in India. Samples were collected from clinically suspected mumps cases were subjected for anti
mumps antibodies, virus isolation, RT-PCR, sequencing and
phylogenetic tree analysis. 56 samples collected from men and women belonging to various age groups. 30 had been vaccinated and
the status of 26 patients was unknown. 28 out of 30 samples were
found to be symptomatic and positive for Mumps IgM, indicating
active mumps infection in 93.4% of the vaccinated population. A
phylogenetic tree comparison of the clinical isolate is shown to be genotype C which is distinct from vaccine strain. Our study clearly sending warning signs that MMR vaccine is a failure and it needs to be revamped for the human use by increasing its efficacy and efficiency.
Abstract: In order to investigate a PROX microreactor
performance, two-dimensional modeling of the reacting flow
between two parallel plates is performed through a finite volume
method using an improved SIMPLE algorithm. A three-step surface
kinetics including hydrogen oxidation, carbon monoxide oxidation
and water-gas shift reaction is applied for a Pt-Fe/γ-Al2O3 catalyst
and operating temperatures of about 100ºC. Flow pattern, pressure
field, temperature distribution, and mole fractions of species are
found in the whole domain for all cases. Also, the required reactive
length for removing carbon monoxide from about 2% to less than 10
ppm is found. Furthermore, effects of hydraulic diameter, wall
temperature, and inlet mole fraction of air and water are investigated
by considering carbon monoxide selectivity and conversion. It is
found that air and water addition may improve the performance of
the microreactor in carbon monoxide removal in such operating
conditions; this is in agreement with the pervious published results.
Abstract: This paper has as its main aim to analyse how
corporate web pages can become an essential tool in order to detect
strategic trends by firms or sectors, and even a primary source for
benchmarking. This technique has made it possible to identify the key
issues in the strategic management of the most excellent large Spanish
firms and also to describe trends in their long-range planning, a way of
working that can be generalised to any country or firm group. More
precisely, two objectives were sought. The first one consisted in showing
the way in which corporate websites make it possible to obtain direct
information about the strategic variables which can define firms. This
tool is dynamic (since web pages are constantly updated) as well as
direct and reliable, since the information comes from the firm itself, not
from comments of third parties (such as journalists, academicians,
consultants...). When this information is analysed for a group of firms,
one can observe their characteristics in terms of both managerial tasks
and business management. As for the second objective, the methodology
proposed served to describe the corporate profile of the large Spanish
enterprises included in the Ibex35 (the Ibex35 or Iberia Index is the
reference index in the Spanish Stock Exchange and gathers periodically
the 35 most outstanding Spanish firms). An attempt is therefore made to
define the long-range planning that would be characteristic of the largest
Spanish firms.