Abstract: Noise has adverse effect on human health and
comfort. Noise not only cause hearing impairment, but it also acts as
a causal factor for stress and raising systolic pressure. Additionally it
can be a causal factor in work accidents, both by marking hazards
and warning signals and by impeding concentration. Industry
workers also suffer psychological and physical stress as well as
hearing loss due to industrial noise. This paper proposes an approach
to enable engineers to point out quantitatively the noisiest source for
modification, while multiple machines are operating simultaneously.
The model with the point source and spherical radiation in a free field
was adopted to formulate the problem. The procedure works very
well in ideal cases (point source and free field). However, most of the
industrial noise problems are complicated by the fact that the noise is
confined in a room. Reflections from the walls, floor, ceiling, and
equipment in a room create a reverberant sound field that alters the
sound wave characteristics from those for the free field. So the model
was validated for relatively low absorption room at NIT Kurukshetra
Central Workshop. The results of validation pointed out that the
estimated sound power of noise sources under simultaneous
conditions were on lower side, within the error limits 3.56 - 6.35 %.
Thus suggesting the use of this methodology for practical
implementation in industry. To demonstrate the application of the
above analytical procedure for estimating the sound power of noise
sources under simultaneous operating conditions, a manufacturing
facility (Railway Workshop at Yamunanagar, India) having five
sound sources (machines) on its workshop floor is considered in this
study. The findings of the case study had identified the two most
effective candidates (noise sources) for noise control in the Railway
Workshop Yamunanagar, India. The study suggests that the
modification in the design and/or replacement of these two identified
noisiest sources (machine) would be necessary so as to achieve an
effective reduction in noise levels. Further, the estimated data allows
engineers to better understand the noise situations of the workplace
and to revise the map when changes occur in noise level due to a
workplace re-layout.
Abstract: Wavelet transform has been extensively used in
machine fault diagnosis and prognosis owing to its strength to deal
with non-stationary signals. The existing Wavelet transform based
schemes for fault diagnosis employ wavelet decomposition of the
entire vibration frequency which not only involve huge
computational overhead in extracting the features but also increases
the dimensionality of the feature vector. This increase in the
dimensionality has the tendency to 'over-fit' the training data and
could mislead the fault diagnostic model. In this paper a novel
technique, envelope wavelet packet transform (EWPT) is proposed in
which features are extracted based on wavelet packet transform of the
filtered envelope signal rather than the overall vibration signal. It not
only reduces the computational overhead in terms of reduced number
of wavelet decomposition levels and features but also improves the
fault detection accuracy. Analytical expressions are provided for the
optimal frequency resolution and decomposition level selection in
EWPT. Experimental results with both actual and simulated machine
fault data demonstrate significant gain in fault detection ability by
EWPT at reduced complexity compared to existing techniques.
Abstract: Power consumption is rapidly increased in data centers
because the number of data center is increased and more the scale of
data center become larger. Therefore, it is one of key research items to
reduce power consumption in data center. The peak power of a typical
server is around 250 watts. When a server is idle, it continues to use
around 60% of the power consumed when in use, though vendors are
putting effort into reducing this “idle" power load. Servers tend to
work at only around a 5% to 20% utilization rate, partly because of
response time concerns. An average of 10% of servers in their data
centers was unused. In those reason, we propose dynamic power
management system to reduce power consumption in green data
center. Experiment result shows that about 55% power consumption is
reduced at idle time.
Abstract: In this paper, a low noise microwave bandpass filter
(BPF) is presented. This filter is fabricated by modifying the
conventional cross-coupled structure. The spurious response is
improved by using the end open coupled lines, and the influence of the
noise is minimized. Impedance matrix of the open end coupled circuit
clarifies the characteristic of the suppression of the spurious response.
The rejection of spurious suppression region of the proposed filter is
greater than 20 dB from 3-13 GHz. The measured results of the
fabricated filter confirm the concepts of the proposed design and
exhibits high performance.
Abstract: This paper deals with an on-line identification method
of continuous-time Hammerstein systems by using the radial basis
function (RBF) networks and immune algorithm (IA). An unknown
nonlinear static part to be estimated is approximately represented
by the RBF network. The IA is efficiently combined with the
recursive least-squares (RLS) method. The objective function for the
identification is regarded as the antigen. The candidates of the RBF
parameters such as the centers and widths are coded into binary bit
strings as the antibodies and searched by the IA. On the other hand,
the candidates of both the weighting parameters of the RBF network
and the system parameters of the linear dynamic part are updated
by the RLS method. Simulation results are shown to illustrate the
proposed method.
Abstract: Unified Modeling Language (UML) extensions for real time embedded systems (RTES) co-design, are taking a growing interest by a great number of industrial and research communities. The extension mechanism is provided by UML profiles for RTES. It aims at improving an easily-understood method of system design for non-experts. On the other hand, one of the key items of the co- design methods is the Hardware/Software partitioning and scheduling tasks. Indeed, it is mandatory to define where and when tasks are implemented and run. Unfortunately the main goals of co-design are not included in the usual practice of UML profiles. So, there exists a need for mapping used models to an execution platform for both schedulability test and HW/SW partitioning. In the present work, test schedulability and design space exploration are performed at an early stage. The proposed approach adopts Model Driven Engineering MDE. It starts from UML specification annotated with the recent profile for the Modeling and Analysis of Real Time Embedded systems MARTE. Following refinement strategy, transformation rules allow to find a feasible schedule that satisfies timing constraints and to define where tasks will be implemented. The overall approach is experimented for the design of a football player robot application.
Abstract: This paper proposes an efficient method for the design
of two channel quadrature mirror filter (QMF) bank. To achieve
minimum value of reconstruction error near to perfect reconstruction,
a linear optimization process has been proposed. Prototype low pass
filter has been designed using Kaiser window function. The modified
algorithm has been developed to optimize the reconstruction error
using linear objective function through iteration method. The result
obtained, show that the performance of the proposed algorithm is
better than that of the already exists methods.
Abstract: This paper deals with the simulation of a Boost Power Factor Correction (PFC) Converter with Electro Magnetic Interference (EMI) Filter. The diode rectifier with output capacitor gives poor power factor. The Boost Converter of PFC Circuit is analyzed and then simulated with diode rectifier. The Boost PFC Converter with EMI Filter is simulated for resistive load. The power factor is improved using the proposed converter.
Abstract: Protein 3D structure prediction has always been an
important research area in bioinformatics. In particular, the
prediction of secondary structure has been a well-studied research
topic. Despite the recent breakthrough of combining multiple
sequence alignment information and artificial intelligence algorithms
to predict protein secondary structure, the Q3 accuracy of various
computational prediction algorithms rarely has exceeded 75%. In a
previous paper [1], this research team presented a rule-based method
called RT-RICO (Relaxed Threshold Rule Induction from Coverings)
to predict protein secondary structure. The average Q3 accuracy on
the sample datasets using RT-RICO was 80.3%, an improvement
over comparable computational methods. Although this demonstrated
that RT-RICO might be a promising approach for predicting
secondary structure, the algorithm-s computational complexity and
program running time limited its use. Herein a parallelized
implementation of a slightly modified RT-RICO approach is
presented. This new version of the algorithm facilitated the testing of
a much larger dataset of 396 protein domains [2]. Parallelized RTRICO
achieved a Q3 score of 74.6%, which is higher than the
consensus prediction accuracy of 72.9% that was achieved for the
same test dataset by a combination of four secondary structure
prediction methods [2].
Abstract: In this paper we investigate how wide-ranging
organizational support and the more specific form of support,
namely management support, may influence on tourism workers
satisfaction with a cash transaction system. The IS continuance
theory, proposed by Bhattacherjee in 2001, is utilized as a
theoretical framework. This implies that both perceived usefulness
and ease of use is included in the research model, in addition to
organizational and management support. The sample consists of
500 workers from 10 cruise and tourist ferries in Scandinavia that
use a cash transaction system to perform their work tasks. Using
structural equation modelling, results indicate that organizational
support and ease of use perceptions is critical for the users- level of
satisfaction with the cash transaction system.The findings have
implications for business managers and IS practitioners that want
to increase the quality of IT-based business processes within the
tourism industry.
Abstract: In recent times, the problem of Unsolicited Bulk
Email (UBE) or commonly known as Spam Email, has increased at a
tremendous growth rate. We present an analysis of survey based on
classifications of UBE in various research works. There are many
research instances for classification between spam and non-spam
emails but very few research instances are available for classification
of spam emails, per se. This paper does not intend to assert some
UBE classification to be better than the others nor does it propose
any new classification but it bemoans the lack of harmony on number
and definition of categories proposed by different researchers. The
paper also elaborates on factors like intent of spammer, content of
UBE and ambiguity in different categories as proposed in related
research works of classifications of UBE.
Abstract: The existing information system (IS) developments
methods are not met the requirements to resolve the security related
IS problems and they fail to provide a successful integration of
security and systems engineering during all development process
stages. Hence, the security should be considered during the whole
software development process and identified with the requirements
specification. This paper aims to propose an integrated security and
IS engineering approach in all software development process stages
by using i* language. This proposed framework categorizes into three
separate parts: modelling business environment part, modelling
information technology system part and modelling IS security part.
The results show that considering security IS goals in the whole
system development process can have a positive influence on system
implementation and better meet business expectations.
Abstract: This paper aims to establish a delayed dynamical relationship between payoffs of players in a zero-sum game. By introducing Markovian chain and time delay in the network model, a delayed game network model with sector bounds and slope bounds restriction nonlinear function is first proposed. As a result, a direct dynamical relationship between payoffs of players in a zero-sum game can be illustrated through a delayed singular system. Combined with Finsler-s Lemma and Lyapunov stable theory, a sufficient condition guaranteeing the unique existence and stability of zero-sum game-s Nash equilibrium is derived. One numerical example is presented to illustrate the validity of the main result.
Abstract: Panoramic view generation has always offered
novel and distinct challenges in the field of image processing.
Panoramic view generation is nothing but construction of bigger
view mosaic image from set of partial images of the desired view.
The paper presents a solution to one of the problems of image
seascape formation where some of the partial images are color and
others are grayscale. The simplest solution could be to convert all
image parts into grayscale images and fusing them to get grayscale
image panorama. But in the multihued world, obtaining the colored
seascape will always be preferred. This could be achieved by picking
colors from the color parts and squirting them in grayscale parts of
the seascape. So firstly the grayscale image parts should be colored
with help of color image parts and then these parts should be fused to
construct the seascape image.
The problem of coloring grayscale images has no exact solution.
In the proposed technique of panoramic view generation, the job of
transferring color traits from reference color image to grayscale
image is done by palette based method. In this technique, the color
palette is prepared using pixel windows of some degrees taken from
color image parts. Then the grayscale image part is divided into pixel
windows with same degrees. For every window of grayscale image
part the palette is searched and equivalent color values are found,
which could be used to color grayscale window. For palette
preparation we have used RGB color space and Kekre-s LUV color
space. Kekre-s LUV color space gives better quality of coloring. The
searching time through color palette is improved over the exhaustive
search using Kekre-s fast search technique.
After coloring the grayscale image pieces the next job is fusion of
all these pieces to obtain panoramic view. For similarity estimation
between partial images correlation coefficient is used.
Abstract: The study was conducted to evaluate the quality
characteristics of cookies produced from sweet potato-fermented
soybean flour. Cookies were subjected to proximate and sensory
analysis to determine the acceptability of the product. Protein, fat and
ash increased as the proportion of soybean flour increased, ranging
from 13.8-21.7, 1.22-5.25 and 2.20-2.57 respectively. The crude fibre
content was within the range of 3.08-4.83%. The moisture content of
the cookies decreased with increase in soybean flour from 3.42-
2.13%. Cookies produced from whole sweet potato flour had the
highest moisture content of 3.42% while 30% substitution had the
lowest moisture content 2.13%. A nine point hedonic scale was used
to evaluate the organoleptic characteristics of the cookies. The
sensory analysis indicated that there was no significant difference
between the cookies produced even when compared to the control
100% sweet potato cookies. The overall acceptance of the cookies
was ranked to 20% soybean flour substitute.
Abstract: In this paper a novel structure of metamaterial is
proposed in order to miniaturize a rectangular microstrip patch
antenna. The metamaterial is composed of two nested split octagons
which are located on a 10 mm
Abstract: The paper presents a detailed calculation of characteristic of five different topology permanent magnet machines for high performance traction including hybrid -electric vehicles using finite element analysis (FEA) method. These machines include V-shape single layer interior PM, W-shape single-layer interior PM, Segment interior PM and surface PM on the rotor and with distributed winding on the stator. The performance characteristics which include the back-emf voltage and its harmonic, magnet mass, iron loss and ripple torque are compared and analyzed. One of a 7.5kW IPM prototype was tested and verified finite-element analysis results. The aim of the paper is given some guidance and reference for machine designer which are interested in IPM machine selection for high performance traction application.
Abstract: The advancement of smartphones, wireless
networking and Near Field Communication (NFC) technology have
opened up a new approach to indoor navigation. Although NFC
technology has been used to support electronic commerce, access
control, and ticketing, there is a lack of research work on building
NFC-based indoor navigation system for smartphone users. This
paper presents an indoor interactive navigation system (named
I2Navi) based on NFC technology for users to navigate within a
building with ease using their smartphones. The I2Navi system has
been implemented at the Faculty of Engineering (FOE), Multimedia
University (MMU) to enable students, parents, visitors who own
NFC-enabled Android smartphones to navigate themselves within the
faculty. An evaluation is carried out and the results show positive
response to the proposed indoor navigation system using NFC and
smartphone technologies.
Abstract: In high powered dense wavelength division
multiplexed (WDM) systems with low chromatic dispersion,
four-wave mixing (FWM) can prove to be a major source of noise.
The MultiCanonical Monte Carlo Method (MCMC) and the Split
Step Fourier Method (SSFM) are combined to accurately evaluate the
probability density function of the decision variable of a receiver,
limited by FWM. The combination of the two methods leads to more
accurate results, and offers the possibility of adding other optical
noises such as the Amplified Spontaneous Emission (ASE) noise.
Abstract: Mathematical models of dynamics employing exterior calculus are mathematical representations of the same unifying principle; namely, the description of a dynamic system with a characteristic differential one-form on an odd-dimensional differentiable manifold leads, by analysis with exterior calculus, to a set of differential equations and a characteristic tangent vector (vortex vector) which define transformations of the system. Using this principle, a mathematical model for economic growth is constructed by proposing a characteristic differential one-form for economic growth dynamics (analogous to the action in Hamiltonian dynamics), then generating a pair of characteristic differential equations and solving these equations for the rate of economic growth as a function of labor and capital. By contracting the characteristic differential one-form with the vortex vector, the Lagrangian for economic growth dynamics is obtained.